A 226.4-l cylinder contains 65.5% he(g) and 34.5% kr(g) by mass at 27.0°c and 1.40 atm total pressure. what is the mass of he in this container?

Answers

Answer 1

To calculate the mass of helium in the gas cylinder, multiply the total mass of the gas mixture by 65.5% (0.655). If the total mass of the mixture is provided, the calculation would yield the mass of helium in grams. Without the total mass, the calculation cannot be completed.

The question involves calculating the mass of helium (He) in a gas cylinder based on the percentage composition by mass and the total mass of the gases in the cylinder. Given that the cylinder contains 65.5% He and 34.5% Kr by mass, to find the mass of He, simply multiply the total mass of the gas mixture by the percentage of He (expressed as a decimal).

First, we need to find the total mass of the gas mixture. However, we do not have the total mass given directly; we have the volume of the cylinder and the percentage composition by mass. Assuming the question meant to provide the total mass of the gas mixture, which is missing in this case, we would use the provided percentages to calculate the mass of He.

Assuming the total mass of the gas mixture is M, the mass of helium can be calculated as (65.5/100) * M. For example, if the cylinder had 500 grams of gas mixture, the mass of helium would be calculated as (65.5/100) * 500 g = 327.5 g.

Answer 2

The mass of helium (He) in the cylinder is calculated by multiplying the total mass of the gases in the cylinder by the percentage of helium, resulting in a mass of 148.29 g for helium.

The student's question is to calculate the mass of helium (He) gas in a cylinder that contains a mixture of helium and krypton (Kr) gases based on the percentage by mass. Given that the cylinder contains 65.5% He by mass, we can use these data to find the mass of helium. To accomplish this, we simply take the percentage of helium and apply it to the total mass of the gas mixture in the cylinder.

To calculate the mass of helium:

Determine the total mass of the gases in the cylinder.

Multiply the total mass by the percentage (expressed as a decimal) of helium in the mixture.

Assuming that the gases in the cylinder have a total mass of 226.4 g (based on the volume mentioned in the question, we can calculate the mass of helium):

Total mass of He = Total mass of gases × Percentage of He in decimal form
Total mass of He = 226.4 g × 0.655
Total mass of He = 148.29 g (rounded to two decimal places)


Related Questions

Hotspot volcanoes occur along subduction zones.
a. True
b. False

Answers

The correct answer for this question would be B) FALSE or the second option.
That is definitely FALSE.

I hope this helps you! :)

Calculate the number of chlorine atoms that are present in 66.05 g of dichloromethane, ch2cl2. when you have the number, take its log (base 10) and enter it with three decimal places and without units.

Answers

From the periodic table:
mass of carbon = 12 grams
mass of hydrogen = 1 gram
mass of chlorine = 35.5 grams
Therefore,
molar mass of CH2Cl2 = 12 + 2(1) + 2(35.5) = 85 grams

number of moles = mass / molar mass
number of moles of CH2Cl2 = 66.05 / 85 = 0.777 moles

One mole of CH2Cl2 contains two moles of Cl and each chlorine mole has Avogadro's number of atoms in it.
Therefore,
number of chlorine atoms in 0.777 moles of CH2Cl2 can be calculated as follows:
number of atoms = 0.777 * 2 * 6.022 * 10^23 = 9.358 * 10^23 atoms

Now, we will take log base 10 for this number:
log (9.358 * 10^23) = 23.97119

The base-10 logarithm of the number of chlorine atoms is 23.971.

Calculate the number of chlorine atoms that are present in 66.05 g of dichloromethane, CH₂Cl₂. When you have the number, take its log (base 10) and enter it with three decimal places and without units.

Step-by-Step Explanation:

First, determine the molar mass of CH₂Cl₂:

Carbon (C): 12.01 g/mol

Hydrogen (H): 1.01 g/mol (each, so 2.02 g/mol for H₂)

Chlorine (Cl): 35.45 g/mol (each, so 70.90 g/mol for Cl₂)

Total molar mass of CH₂Cl₂ = 12.01 g/mol + 2.02 g/mol + 70.90 g/mol = 84.93 g/mol

Calculate the moles of CH₂Cl₂ in 66.05 g:

66.05 g / 84.93 g/mol = 0.7774 mol CH₂Cl₂

Since each molecule of CH₂Cl₂ contains 2 chlorine atoms, calculate the moles of chlorine atoms:

0.7774 mol CH₂Cl₂ x 2 = 1.5548 mol Cl atoms

Convert moles of chlorine atoms to the number of atoms using Avogadro's number (6.022 x 10²³ atoms/mol):

1.5548 mol x 6.022 x 10²³ atoms/mol = 9.36 x 10²³ chlorine atoms

Take the logarithm base 10 of the result:

log10(9.36 x 10²³ )= 23.971

Therefore, the logarithm (base 10) of the number of chlorine atoms in 66.05 g of dichloromethane, CH₂Cl₂, is 23.971.

An atom with _______________ electrons in its outer shell makes one happy, satisfied atom

Answers

8 electrons are needed to be stable

The neutralization reactions always produced which compound?

Answers

A neutralization reaction is the reaction between an acid and a base to produce water and a salt. A salt is another name for an ionic compound and the specific saltproduced depends on the acid and base involved.

. An object with a mass of 6.0 kg accelerates 4.0 m/s2 when an unknown force is applied to it. What is the amount of the force? ______________________

Answers

Answer:

24 N

Explanation:

we have that an object of mass 6 kg has an acceleration of[tex]4 m/s^2[/tex] to find out the value of the unknown force that is applied we use the following formula

[tex]F= m.a[/tex]

The unit in which the force is expressed is in Newtons

[tex]N= kg.\frac{m}{s^2}[/tex]

[tex]F= 6.0 Kg. 4.0 \frac{m}{s^2}\\ F= 24 N[/tex]

The amount of the applied force is 24 N.

Net force on object

The net force on an object is determined by applying Newton's second law of motion.

F = ma

where;

F is the applied forcem is the massa is acceleration

F = 6 x 4

F = 24 N

Thus, the amount of the applied force is 24 N.

Learn more about Newton's second law of motion here: https://brainly.com/question/3999427

Carbon fixation involves the addition of carbon dioxide to _____. carbon fixation involves the addition of carbon dioxide to _____. 3-pga g3p nadph rubp rubisco

Answers

Carbon fixation involves the addition of carbon dioxide to RuBP.
Carbon fixation refers to the process by which atmospheric carbon dioxide is converted into organic carbon compounds such as carbohydrates. Carbon fixation is the first step of calving cycle.
Final answer:

Carbon fixation is a part of photosynthesis where CO2 is added to RuBP to form 3-PGA and eventually glucose. The process is catalyzed by the enzyme RuBisCO and also involves the stages of reduction and regeneration.

Explanation:

Carbon fixation is a process in photosynthesis where carbon dioxide (CO2) combines with a five-carbon sugar, ribulose bisphosphate (RuBP), to form a six-carbon compound. This reaction is catalyzed by an enzyme called RuBisCO. The six-carbon compound is then broken down into two molecules of 3-phosphoglycerate (3-PGA). This cycle, known as the Calvin cycle, involves not only fixation, but also the stages of reduction and regeneration. Reduction uses ATP and NADPH to convert the 3-PGA into glyceraldehyde 3-phosphate (G3P), some of which is used to build glucose. The remaining G3P is used to regenerate RuBP, using additional ATP, which allows the cycle to continue with more carbon fixation.

Learn more about Carbon fixation

https://brainly.com/question/7142342

#SPJ12

A sample of a gas originally at 29 °c and 1.25 atm pressure in a 3.0 l container is allowed to contract until the volume is 2.2 l and the temperature is 11 °c. the final pressure of the gas is ________ atm.

Answers

Answer: 1.6 atm. pV/T = constant. (1.25 * 3.0)/(273+29) <-- work in Kelvin This gives you the constant. Then you want p So p = (T*constant)/V = (284*0.0124)/2.2 I get = 1.6atm
Final answer:

The question is about the combined gas law, which factors in pressure, volume and temperature changes in a gas sample. By inserting given values into the combined gas law equation, the final pressure comes out as approximately 1.558 atm.

Explanation:

The question pertains to the principles of gas laws, particularly the combined gas law, which states that pressure, volume and temperature of a gas have an interlinked relationship, and thus change proportional to each other, provided the amount of gas is kept constant.

If we denominate the initial conditions as P1, V1 and T1 (in Kelvin), and the final conditions as P2, V2 and T2 (also in Kelvin), then the combined gas law can be written as:

P1*V1/T1 = P2*V2/T2

We know that P1=1.25 atm, V1=3.0 L, and T1=29°C = 302.15 K. The final Volume V2=2.2 L and final temperature T2=11°C = 284.15 K.

Substituting these values into the equation:

1.25 * 3.0/302.15 = P2 * 2.2/284.15

By calculating, we find that P2 = 1.558 atm, which is the final pressure of the gas.

Learn more about Combined Gas Law here:

https://brainly.com/question/30458409

#SPJ3

What is the electron configuration of an element with atomic number 20?

Answers

[Ar]4s^2
hope it helps

Answer:

 What is the electron configuration of an element with atomic number 20?  1s2 2s2 2p6 3s2 3p6 4s2

Explanation:

Imagine that you have a rectangular swimming pool, but you have no idea how deep it is. You
know that the pool has a volume of 216 m3
. You measured the dimensions of the pool and
found that it is 15 m long and 6 m wide.
A. Calculate the depth of the pool. Show your work.

Answers

To calculate the volume of any rectangular shape,
We can simply multiply length to wide and to depth.
Let d be the depth.
15 x 6 x d = 216
d = 216 / 15 / 6
d = 2.4
Therefore the depth is 2.4m

In a redox reaction, why does an element’s oxidation number increase?

A.) An element’s oxidation number increases because it gained electrons.
B.) An element’s oxidation number increases because it lost electrons.
C.) An element’s oxidation number increases because it was heated.
D.) An element’s oxidation number increases because it was reduced.

Answers

B.) an elements oxidation number increases because it lost electrons.

#PlatoLivesMatter 

Answer: B) An element’s oxidation number increases because it lost electrons.

Explanation:

A redox reaction is a chemical reaction in which one or more electrons are transferred between the reactants, causing a change in their oxidation states.

The oxidation state or oxidation number is defined as the sum of positive and negative charges of an atom, which indirectly indicates the number of electrons that the atom has accepted or yielded.

By accepting electrons, the oxidation state of an atom decreases, becoming more negative, and therefore, it is reduced. On the other hand, an element that yields electrons increases its oxidation number and oxidizes.

In this way, an element’s oxidation number increase because it lost electrons, becoming a more positive ion.

PLEASE HELP ASAP WILL MARK BRAINLESS AND GIVE 20 POINTS

The process of filtration was used to separate a sample into its components. What conclusion about the sample can be formed based on the technique used?
It was a pure substance.
It was a compound.
It was a heterogeneous mixture.
It was a homogeneous mixture

Answers

It was a heterogeneous mixture.

Since you were able to separate the mixture than means they are heterogeneous mixture 
It was a heterogeneous mixture is your answer, or C.

Which of these is a pair of isotopes? na+ and na cl-35 and cl-37 f and cl o2 and o3?

Answers

Answer:

Cl35 and Cl37.

Explanation:

That would be Cl35 and Cl37 . Two isotopes of the gas chlorine.

Which value gives the number of particles in 1 mol of a substance? 6.02 mc012-1.jpg 1021 6.02 mc012-2.jpg 1022 6.02 mc012-3.jpg 1023 6.02 mc012-4.jpg 1024

Answers

I just took the test and the correct answer is 6.02 x 10^23

What type of composition does an igneous rock have that contains mostly plagioclase feldspar and about 30 percent dark silicate minerals?

A. basaltic
B. granitic
C. andesitic
D. ultramafic

Answers

the answer is C.) Andesitic.

Answer:

The correct answer is option C, that is, andesitic.

Explanation:

Andesite is the term used for a fine-grained extrusive rocks family, which are generally light to dark gray in appearance. They generally weather to different shades of brown. Andesite mostly comprises plagioclase feldspar minerals and may also comprise pyroxene, biotite, or amphibole as the dark silicate minerals. It generally does not comprise olivine or quartz.

What is the maximum number of atoms that a carbon atom can bond with in an organic compound?

Answers

the answer is...
*drum roll*
4

Answer: 4 atoms

Explanation: Since carbon atom valency is 4 hence it forms 4 bonds with other 4 atoms.

As we know that carbon has atomic number-6 and electronic configuration 1s2 2s2 2p2

And it has 4 electrons in outer shell. These 4 electrons forms bind with other atoms.

Why was Aristotle considered correct over Democritus based on their time period

Answers

Aristotle considered correct over Democritus based on their time period because Aristotle was more popular than Democritus and had a better reputation, and his philosophical points overcame Democritus'. Aristotle was a famous scientist and know for being the teacher of Alexander The Great.

Final answer:

Aristotle's ideas were favored over Democritus' because of his immense influence and the prevailing rationalist approach of the time which prioritized logic over empirical observation, leading to Aristotle's four-element theory of matter being accepted while Democritus' atomic theory was overlooked until much later.

Explanation:

Aristotle was considered more correct than Democritus during their time period because Aristotle was an incredibly influential philosopher, and his ideas were readily accepted by many. While Democritus had postulated that all matter was made up of tiny, indivisible particles called atoms, it was Aristotle's theory that everything was composed of four elements: earth, air, fire, and water that prevailed. The cultural and intellectual climate of the time favored logic and rational thought over empirical scientific methods, which meant that experimental verification of theories, like those of Democritus, wasn't pursued. Therefore, Aristotle's ideas held sway for nearly two thousand years before science recognized the validity of Democritus' concept of atoms.

The process where water changes from a liquid to a gas

Answers

Evaporation
hope this helps

When atoms lose or gain electrons in chemical reactions they form?

Answers

When atoms lose or gain electrons in chemical reactions they form? 
Ions

When atoms loose or gain electrons  in chemical reactions they form ions on loosing electrons they form cations and on gaining electrons they form anions.

What are ions?

An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.

Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created  by chemical interactions . They are very reactive in their gaseous state  and rapidly react with oppositely charged ions  resulting in neutral molecules.

Learn more about ions ,here:

https://brainly.com/question/3110170

#SPJ2

Why is water important for a cell? A) Water is the main ingredient in DNA. B) Most chemical reactions in cells require water. C) All proteins are made of water. D) Water is an essential organic compound.

Answers

The answer is B because if you don't have water on your body you won't live right, and if you don't have water on your body your cells won't work that well.

I HOPE THIS HELP!!

Describe 2 characteristics all metals should display?

Answers

Hard protective outer layer
Difficulty to destroy
They are usually shiny, malleable, and hard. Metals are also good conductors of electricity.

Gases emitted during volcanic activity often contain high concentrations of hydrogen sulfide and sulfur dioxide. these gases may react to produce deposits of sulfur according to the equation: 2 h2s(g) so2(g) → 3 s(s) 2 h2o(g) for the complete reaction of 6.41 mol of hydrogen sulfide:

Answers

There can be three possible answers to this question: the amount of moles of SO₂ gas needed to react with 6.41 mol H₂S, and the amount of S and H₂O gas produced.

Amount of SO₂:
6.41 mol H₂S (1 mol SO₂/2 mol 2 mol H₂S) = 3.205 moles SO₂ gas

Amount of S:
6.41 mol H₂S (3 mol S/2 mol 2 mol H₂S) = 9.615 moles S solid

Amount of H₂O:
6.41 mol H₂S (2 mol H₂O/2 mol 2 mol H₂S) = 6.41 moles H₂O gas
Final answer:

In a volcanic reaction, two moles of hydrogen sulfide and sulfur dioxide react to form three moles of sulfur and two moles of water. Given 6.41 moles of hydrogen sulfide, 9.615 moles of sulfur would be formed. This reaction explains the presence of sulfur deposits in volcanic areas and contributes to the removal of hydrogen sulfide from volcanic emissions.

Explanation:

In the given reaction: 2H₂S(g) + SO₂(g) → 3S(s) + 2H₂O(g), hydrogen sulfide (H2S) and sulfur dioxide (SO2) are converted into sulfur (S) and water (H2O). This is a common reaction that occurs during volcanic activities when gases are emitted. It explains the presence of sulfur deposits found in volcanic areas.

As indicated by the stoichiometry of the reaction, for each two moles of hydrogen sulfide reacted, three moles of sulfur are produced. Therefore, for the complete reaction of 6.41 moles of H2S, you would expect to form 3/2*6.41 = 9.615 moles of sulfur.

The reaction is an example of redox (reduction-oxidation) process. Here, hydrogen sulfide is oxidized to water, while sulfur dioxide is reduced to sulfur. The reaction, besides leading to the creation of sulfur deposits in volcanic regions, also contributes to the removal of hydrogen sulfide one of the gases found within volcanic emissions.

Learn more about Volcanic Reaction here:

https://brainly.com/question/11945125

#SPJ11

Is sodium chloride a solid liquid or gas at room temperature?

Answers

Sodium chloride is a solid at room temperature.

Chemical reactions with metals may create some interesting results such as a precipitate. What is a precipitate?

Question 3 options:

A. a gas that forms when two liquids are mixed


B. a solid that forms when two liquids are mixed


C. a liquid that forms when two solids are mixed


D. a solid that forms when two gasses are mixed

Answers

The answer to this question would be: B. a solid that forms when two liquids are mixed

Precipitation is creating a solid substance from the solution. The product is called precipitate and the solution would be called supernate. Precipitation could happen because of gravity pulling up the molecule or because the molecule is saturated.

How many valence electrons does an atom of any halogen have?

Answers

all halogens are stable so they have 8 electrons in their last shell

What is the average speed of an object that travels 50 miles in 2 hours?

Question 3 options:

50 mph


25 mph


100 mph


2 mph

Answers

Well, this is simple :) 

So you know that this object travels 50 miles in 2 hrs. So how many miles would it travel in 1 hr. Simply split 50 in half. So this is 25mph

25mph

A bond formed by electrical attraction between two oppositely charged ions is called

Answers

Ionic bond, also called electrovalent bond , type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound.

How does a solid differ from a liquid?
b. how does a liquid differ from a gas?
c. how is a liquid similar to a gas?
d. what is a plasma?

Answers

1Solids have a defined shape and volume a liquid has no definitive shape but does have a definitive volume
Gas has definitive volume gas doesn’t
gas and liquid has no defenitive shape
Plasma is the fourth form of matter making up most of our universe

Final answer:

Solids have a definite shape and volume, while liquids have a definite volume but their shape changes. Liquids and gases are both fluids, but gases do not have a definite shape.

Explanation:

A solid differs from a liquid in that it has a definite shape and a specific volume, while a liquid has a definite volume but its shape changes depending on the container it is in.

A liquid differs from a gas in that it does not have a definite shape and its molecules are closely packed together, while gas molecules are more spread out and can freely move around.

A liquid is similar to a gas in that both are considered fluids, meaning they can flow and take the shape of their container.

Plasma is a state of matter in which the particles are highly ionized and can conduct electricity. It does not have a definite shape or volume, and is similar to a gas in that its particles are not tightly packed together.

What are the two main products of the light-capturing reaction of photosynthesis?

Answers

The two main products in the capture of light, are sunlight and chlorophyll and belong to the light phase of photosynthesis which is a stage in which chemical reactions occur. Sunlight emits energy and light and chlorophyll captures this sunlight and causes the water molecule to break up, separating the hydrogen from the oxygen and the chemical bond that holds the hydrogen and the oxygen of the water molecule together. of the light.

Answer: NADPH and ATP

Explanation:

An action potential arriving at the presynaptic terminal causes what to occur? multiple choice voltage-gated calcium ion channels open, and calcium ions diffuse into the cell. voltage-gated sodium ion channels open, and sodium ions diffuse into the cell. acetylcholine diffuses into the cell. ligand-gated sodium channels open, and sodium ions diffuse out of the cell. voltage-gated sodium ion channels open, and sodium ions diffuse out of the cell.

Answers

The answer to this question would be: calcium ions to diffuse into the cell.

The presynaptic neuron would need to release neurotransmitter to the postsynaptic neuron. To do this, the action potential will cause calcium ion diffuse into the cell causing the vesicle with the neurotransmitter to migrate to the cell membrane and release its content. 
Final answer:

An action potential arriving at the presynaptic terminal causes voltage-gated Ca²+ channels to open, allowing calcium ions to enter the cell and triggering the release of neurotransmitters into the synaptic cleft.

Explanation:

When an action potential reaches the axon terminal, it depolarizes the membrane and opens voltage-gated Ca²+ channels. Calcium ions enter the cell and initiate a signaling cascade that causes synaptic vesicles containing neurotransmitter molecules to fuse with the presynaptic membrane. This leads to the release of neurotransmitters into the synaptic cleft.

Learn more about neurotransmission here:

https://brainly.com/question/34137840

#SPJ6

Identify the more stable isotope in each pair.

Answers

i need more information for this question
Other Questions
Life insurance is NOT used for: a)Burial expenses b)Investing in the stock market c)Providing for dependents A car travels 6 miles north, 3 miles east, and then 2 miles south. What is the distance traveled? Billy Graham spoke out against the _____.social reforms of the 50sthe evils of rock and rollthe litigation in the Souththe evils of the Soviet Union Using the Quadratic Formula, which of the following is the solution to the quadratic equation 5x2 + 10x - 5 = 0?x = -1 -2, x = -1 + 2x = -1 -5, x = -1 + 5x = 1 -2, x = 1 + 2x = -1 -201, x = -1 + 201 Which table represents a function. Roy is saving to buy a new bike, which costs $258. He has $16 towards this purchase. Express how much more Roy needs in the form of an equation? several states ratified the constitution only after being assured that a bill of rights would be added to it. In your opinion, what is the most important value of the bill of rights? Why? Jack's manager asks him to distribute information and an attachment as quickly as possible to all their clients. In 12 sentences, describe what Jack should do. One of the steps in processing some metals is smelting. what does smelting do for a metal? Why, in some ways, is the term American Revolutions more appropriate than American Revolution? I haven't studied accounting in a well can some one please help me?(30 points)Prepare general journal entries to record the following transactions for the Harris Company. (The company uses the balance sheet approach for recording bad debts expense.)2010Dec. 31 Recorded Bad Debts Expense, $8002011Jan. 3 Wrote off Jals account as uncollectible, $60Mar. 4 Wrote off Halls account as uncollectible, $75Jul. 5 Recovered $45 from HallAug. 19 Wrote off M. Wilsons account as uncollectible, $100Nov. 7 Recovered $25 from Jal It can be said that the energy we obtain from foods comes from the sun. this is because: can someone help me with question 2 plz Select the function that represents an arithmetic sequence.A(n) = P(1 + i)n 1, where n is a positive integer B.A(n) = P + (n 1)i P, where n is any real number C.A(n) = P(1 + i)n 1, where n is any real number D.A(n) = P + (n 1)i P, where n is a positive integer How do you find and use the greatest common factor of two whole numbers The money the borrower pays for the use of the lender's money is called the ______. OHHHHHH!!!! I have a math problem Help me Will give Brainliest What percent of us high school students have never tried marijuana? Why were the Wampanoag upset with the English settlers? A: The settlers offered the Wampanoag no payment for use of their land. B: The English were selling Wampanoag children as slaves in the West Indies. C: The settlers hunted game with guns as sport, killing many animals. D: The settlers believed they owned the land on which the Wampanoag settled The equation for line g is given by 5y=2x-20. Suppose line g is parallel to like r and line e is perpendicular to line g. Point (10,-8) lies on both line r and line Steam Workshop Downloader