A battery becomes undercharged in a vehicle that is driven regularly. the charge indicator light remains off with the engine running. the cause of this problem could be

Answer:

Your correct answer is B SD medium capacity

Explanation:

Adding a school email to a phone often requires correct email settings and additional security configuration. Make sure to use the correct protocol and check for any required permissions, and consult your school's IT department if issues persist.

It seems like you're experiencing difficulty adding your school email to your phone. First, ensure you have the correct email settings provided by your school's IT department. This often includes your email address, password, server settings, domain, and possibly specific port numbers. For most school emails, they will be using Exchange, IMAP, or POP3 protocol for email syncing.

You may also have to enable certain permissions or configure additional security settings, particularly if your school email incorporates two-factor authentication or if your device requires mobile device management (MDM) installation. Don't forget to check if your phone's operating system is up-to-date, as older versions can sometimes cause compatibility issues with newer email protocols.

If you're still experiencing issues, it may be beneficial to reach out to your school's IT support team for personalized assistance. They can provide step-by-step guidance and troubleshoot any specific problems that may be unique to your school's email setup.

To use the analog telephone system for sending digital data, you must also use a modem. A modem converts digital data into analog signals for transmission and converts received signals back to digital data.

To use the analog telephone system for sending digital data, you must also use a modem. Here’s how it works:

Digital Data Conversion: Digital data, which consists of binary ones and zeros, needs to be converted into analog signals. A modem (short for modulator-demodulator) accomplishes this task. It modulates digital data into analog signals for transmission over telephone lines and demodulates the received analog signals back into digital data at the receiving end.

Analog Signal Transmission: Analog phones transmit data over a continuous range of frequencies. The modem converts binary ones and zeros into analog frequency tones that can be reliably sent over these frequencies.

Noise Reduction: Digital systems, including those using modems, handle noise better than pure analog systems. Any error that a small amount of noise introduces can be effectively detected and corrected.

For example, when sending computer data over an analog phone line, a sending modem translates the digital data into analog signals. At the receiving end, another modem converts the analog signals back into digital data for the computer to process.

The HTML element to describe significant text is the <strong>.

When investigated into the document object, an HTML element is a discrete part of an HTML document or web page. HTML is made up of a tree of HTML nodes like text nodes.

HTML properties can be supplied for each node. Nodes can also include content such as other nodes and text. Many HTML nodes are used to represent semantics or meaning.

For example, the title node specifies the file's name, while an HTML element is distinguished by a main tag. If the element contains additional gratified, it ends with a terminating tag that is preceded by a forward slash.

Learn more about HTML element at:

https://brainly.com/question/11569274

#SPJ6

To find the largest files on your computer using Explorer, open Computer and click up in the search box. When you click inside of it, a little window pops up below with a list of your recent searches and then a add search filter option.

Go ahead and click on Size and then you’ll get another menu with a couple of options:

Go ahead and pick something like Large, Huge or Gigantic otherwise you will get a list of way too many files. If you just want to see larger files, I suggest choosing huge or gigantic. Then just press enter without typing in anything else.

Alternatively, drop to command prompt type cd\

dir /s/o:s to get a listing in ascending order.

for descending order dir /s/o:-s

Since there might be a lot of files you might want to pipe it into a text file, simply add > largefiles.txt

dir /s/o:-s  > c:\temp\largefiles.txt    (the c:\temp directory must exist, if not the command will fail. Once you're on the root with cd\ just create the temp directory with md c:\temp or via the GUI, alternatively, again add & md c:\temp into the dir command)

If you want to get fancy you can also just open the results with the & 

dir /s/o:-s  > c:\temp\largefiles.txt & notepad c:\temp\largefiles.txt

Please Note:

(the c:\temp directory must exist, if not the command will fail. Once you're on the root with cd\ just create the temp directory with md c:\temp or via the GUI, alternatively, again add & md c:\temp into the dir command)

md c:\temp\ & dir /s/o:-s  > c:\temp\largefiles.txt & notepad c:\temp\largefiles.txt

Emilio should check the less expensive labels for Word compatibility, ensure they fit his printing and application needs, and confirm that he can create or find a suitable template before purchasing.

Before Emilio purchases the less expensive labels, he needs to ensure that they are compatible with the Word document he created for printing labels. First, he should check the packaging of the labels to see if they provide a template or mention compatibility with Word. Many label manufacturers offer templates that can be downloaded and used within Word. If no information is provided, Emilio should look for the label size and compare it to the available templates in Word, or consider measuring the label dimensions and configuring a custom template if necessary.

Furthermore, Emilio should make sure that his printer can handle the label material and that the label adhesive is suitable for the surface to which they will be applied. If the less expensive labels provide all the necessary details for creating a Word template and are suitable for his printing and application needs, he can opt for the more affordable option without compromising his project.

Final answer:

Image files can be broadly classified into two categories: raster graphics and vector graphics. Raster graphics are pixel-based and include formats like JPEG, GIF, and BMP, whereas vector graphics use mathematical formulas to represent images, allowing them to be scaled without losing quality, with SVG being a common format.

Explanation:

Image files are grouped into two categories: raster graphics and vector graphics. Raster graphics, such as JPEG, GIF, and BMP, store images as a collection of pixels, with each pixel representing a single color. The quality of these images is dependent on their resolution, with higher pixel densities resulting in sharper images. Examples of raster graphics include digital photos which are often seen in JPEG format. On the other hand, vector graphics, such as SVG, define images using mathematical formulas that represent shapes and lines. This allows vector images to be scaled up or down in size without losing quality, making them ideal for logos and other designs that need to be resized frequently. Common examples of vector file formats include SVG (Scalable Vector Graphics).

Understanding the differences between these two categories is essential for working efficiently with digital images, each having their unique advantages depending on the application.

Answer:

A. Face

Explanation:

A poppet valve some time called mash room valve.The word poppet shares etymology with "puppet". In past "puppet valve" was synonym for poppet valve. however, this usage of "puppet" is now obsolete. The valve stem moves up and down inside the passage called guide, which is fitted in the engine-block. the head of the valve called valve face, is generally ground to a 45 degree angle. So as to fit properly on the valve seat in the block and prevent leakage.

Answer:

The maximum capacity of disc is 12,80,000 bytes.

Step-by-step explaination:

Given a magnetic disc having 100 cylinders & each containing 10 tracks of 10 sectors. Hence, total no. of sectors in magnetic disc are [tex]100\times 10\times 10[/tex]=10000 sectors

Each sector contain 128 bytes.

we have to find the maximum capacity which can be calculated as

Maximum capacity = No. of sectors[tex]\times[/tex]capacity of sectors

                               =  10000[tex]\times[/tex]128

                              = 12,80,000 bytes

The maximum capacity of the disk is 1280000 bytes.

Further Explanation:

It is given that a magnetic disc having 100 cylinders and each cylinder containing 10 tracks of 10 sectors.

Therefore, the number of sectors in the magnetic disc is the product of total cylinders, tracks and sectors.

The number of sectors is calculated as,

[tex]\begin{aligned}\text{Total sectors}&=100\times 10\times 10\\&=10000\end{aligned}[/tex]

The maximum capacity of the magnetic disc is the product of number of sectors in magnetic disc and capacity of a sector.

[tex]\begin{aligned}\text{maximum capacity}&=10000\times 128\\&=1280000\end{aligned}[/tex]

Thus, the maximum capacity of the magnetic disc with 10000 sectors and capacity of 128 bytes is 1280000 bytes.

Learn more:

1. A company that allows you to license software monthly to use online is an example of ? brainly.com/question/10410011  

2. Prediction accuracy of a neural network depends on _______________ and ______________. brainly.com/question/10599832  

3. The shape of our galaxy was determined ‘on the inside looking out' by surveying the milky way using ____________ telescopes. brainly.com/question/7866623

Answer details:

Grade: College Engineering

Subject: Computer Science and Technology

Chapter: Computer hardware

Keyword:

Capacity, maximum, hardware, magnetic, disc, sector, bus, bytes, bits, product, cylinder, track, compact disc, hard drive, floppy, optical disc, architecture, computer,  floppy disk, magnetic tape, MB, KB, disk

The best method for collecting information involves summarizing, paraphrasing, or directly quoting the source material, always with proper citations to avoid plagiarism and maintain credibility.

The best method for collecting information from a source is multifaceted and depends on your research objective. When considering the notes from your sources, you have the choice to summarize, paraphrase, or directly quote the information. Summarizing involves conveying the general idea of a text in a shorter form, without detailed specifics. Paraphrasing is close in length to the original text but rephrased in your own words. Direct quoting maintains the exact wording from the source and is placed inside quotation marks. Regardless of the choice made, proper in-text citation is crucial in order to credit the original author and avoid plagiarism. This practice preserves the integrity of your work and provides a pathway for readers to verify your sources.

When collecting information, it's essential to keep meticulous notes, ensuring that you clearly distinguish between your ideas and those borrowed from sources. Effective note-taking allows you to refer back to the original texts which aids in accurate quoting and paraphrasing. Moreover, the organization of source material and notes will assist in accurately citing your information sources, thus upholding your professional credibility.