A block of mass m is attached atthe end of a spring of force constant 10N/m vibrates in SHM with frequency of 10/bi Hz. Find the mass of the block

Answer:

A) Shape of Continental coastlines matching up together

Explanation:

It helped provide evidence for how the plates moved. Answer B could be right, but the moving of the plates helped provide evidence as to why we were finding similar fossils on different countries so it's almost opposite

The arguments for and against the theory that animals have the capacity for language, like humans, revolve around communication abilities and linguistic complexity. Some argue that animals can communicate using complex systems of signs, sounds, and gestures, while others claim that their communication lacks the complexity and structure of human language.

There are arguments both for and against the theory that animals have the capacity for language, like humans. Some argue that animals do have the capacity for language based on their ability to communicate with each other and with humans using complex systems of signs, sounds, and gestures. For example, dolphins use a system of clicks and whistles to communicate with each other. Some primates have been taught sign language and can use it to communicate with humans.

On the other hand, some argue that animals do not have the same capacity for language as humans. They point out that while animals can communicate, their communication lacks the complexity and structure found in human language. Animal communication is often limited to simple signals or gestures, rather than the complex syntax and grammar of human language.

Additionally, animals do not exhibit the same level of linguistic creativity and symbolic thought as humans. For example, humans can use language to discuss abstract concepts, tell stories, and express emotions, whereas animals typically use communication for more practical purposes such as signaling danger or finding food.

https://brainly.com/question/14928413

#SPJ12

1) It means that the ratio [tex]\frac{\Delta L}{L}[/tex], where [tex]\Delta L[/tex] is the change in length of the material and L is the original length, change by 0.000017 units for an increase in temperature of 1 Kelvin.

2) The safety gap between two successive bars is 0.33 mm

Explanation:

1)

When a solid material is heated and its temperature increases, the material expands. The linear expansivity of the material gives a measure of how much the length of the material increases per unit temperature change.

For instance, the linear expansivity of copper is

[tex]\alpha = 0.000017/K[/tex]

which means that the ratio [tex]\frac{\Delta L}{L}[/tex], where [tex]\Delta L[/tex] is the change in length of the material and L is the original length, change by 0.000017 units for an increase in temperature of 1 Kelvin.

In formula, this can be rewritten as

[tex]\frac{\Delta L}{L} = \alpha \Delta T[/tex]

where [tex]\Delta T[/tex] is the change in temperature of the material.

2)

To solve this part of the problem, we can use the formula given in the previous part:

[tex]\frac{\Delta L}{L} = \alpha \Delta T[/tex]

Which can be rewritten as

[tex]\Delta L =L \alpha \Delta T[/tex]

where in this case, we have:

L = 3 m is the original length of the steel bar

[tex]\alpha = 1.0\cdot 10^{-5} /K[/tex] is the linear expansivity of steel

[tex]\Delta T = 40^{\circ}C-29^{\circ}C=11^{\circ}C[/tex] is the increase in temperature of the steel bar

Therefore, by solving the formula for [tex]\Delta L[/tex], we find the increase in length of the steel bars when the temperature increases to 40 degrees:

[tex]\Delta L = (3)(1.0\cdot 10^{-5})(11)=3.3\cdot 10^{-4} m = 0.33 mm[/tex]

This means that the safety gap between two successive bars must be 0.33 mm.

Learn more about temperature:

brainly.com/question/1603430

brainly.com/question/4370740

#LearnwithBrainly

It travels faster at higher temperature. Longitudinal wave is a wave in which the vibration of the particles travels in the parallel direction to the propagation of wave. Therefore, the common characteristic between transverse wave and longitudinal is both move faster at higher temperature.

Transverse waves and longitudinal waves are both types of mechanical waves that propagate through a medium.

Wavelength is a fundamental property of waves, including electromagnetic waves like light and radio waves, as well as other types of waves, such as sound waves or water waves.

One commonality between transverse and longitudinal waves is that they both involve the transfer of energy through a wave. In both cases, the energy is carried by the disturbance of the medium, whether it is a series of crests and troughs in a transverse wave or a series of compressions and rarefactions in a longitudinal wave.

Another commonality is that both types of waves can exhibit properties such as reflection, refraction, diffraction, and interference. These phenomena occur as the wave interacts with boundaries, obstacles, or other waves, and they can affect the behavior and properties of the wave.

Learn more about wavelength here:
https://brainly.com/question/13533093
#SPJ6

Answer:

9.05 W

Explanation:

The given formula is [tex]r=\sqrt {\frac {P}{0.02\pi}}[/tex] where r is in centimeters and P is in Watts

Making Power, P the subject from the above formula

[tex]P=0.02\pi r^{2}[/tex]

Substituting r with 12 cm then

[tex]P=0.02\pi 12^{2}= 9.047786842  W\approx 9.05 W[/tex]

Final answer:

A cell with a radius of 12 cm produces approximately 2.88π watts of power.

Explanation:

The given equation relates the power P produced by a circular solar cell to the radius r of the cell. To find the power produced by a cell with a radius of 12 cm, you can substitute this radius value into the equation.

Using the equation r = √(p / (0.02π)), we have r = √(p / (0.02π)). Plugging in r = 12 cm, we can solve for P.

12 = √(p / (0.02π)) ⇒ [tex]12^2[/tex] = p / (0.02π),

or 144 = p / (0.02π).

Multiplying both sides of the equation by (0.02π), we get:

2.88π = p.

Therefore, a cell with a radius of 12 cm produces approximately 2.88π watts of power.

Answer:

Permanent Charging. When you take a temporarily charged object and ground it, the charged object retains its charge. This is called permanent charging by induction.

Answer:

True

Explanation:

Just as Isaac Newton says, "For every action, there is an equal and opposite reaction."

Answer:

You now this question state why a person standing at point Y hears an echo

Explanation:

Density is mass divided by volume.  For example, Block A:

ρ = m / V

ρ = 60 g / 125 cm³

ρ = 0.48 g/cm³

I assume each block is a cube, so the length of block underwater divided by the side length of the block is the percent underwater.

% = 1.8 / 3.9

% = 46%

Repeat for Blocks B through E.

A 2 kg fluffy pillow has more volume, while a 3 kg small piece of iron has more mass due to their differences in density.

A 2 kg fluffy pillow has more volume, while a 3 kg small piece of iron has more mass.

The volume of an object is the amount of space it occupies. The fluffy pillow, being soft and compressible, takes up more space than its mass would suggest.

The mass of an object, on the other hand, is the amount of matter in it. The small piece of iron, though heavier, occupies less space and has a higher density than the fluffy pillow.

https://brainly.com/question/33058328

#SPJ2

A 3 kg piece of iron has more mass than a 2 kg pillow, but the pillow likely has a greater volume due to lower density. The difference in density affects the volume that the same mass of two different materials occupies.

The 3 kg small piece of iron has more mass than the 2 kg fluffy pillow because 3 kg is greater than 2 kg. However, the fluffy pillow likely has more volume because it is less dense than the iron. This difference occurs because density is defined as mass divided by volume. The iron has a higher density which means it has more mass in a given volume compared to the pillow's material. For instance, a kilogram of feathers has the same mass as a kilogram of iron, but the feathers occupy a much larger volume because they are less dense.

Let's consider the weight in Newtons as an example. The weight of an object on Earth can be calculated by multiplying its mass in kilograms by the acceleration due to gravity (9.8 m/s2). So, the weight of a 3 kg textbook is approximately 29.4 Newtons (3 kg × 9.8 m/s2).

Finally, comparing materials of the same weight, a pound of gold has the same mass as a pound of iron on Earth’s surface, but their volumes and thus their densitiess Will differ. The density is the critical factor determining volume for the same mass of two different substances.

Answer:

Its C waxing gibbous

Explanation:

a) It means that the relative change of length of the copper, [tex]\Delta L/L[/tex], increases by 0.000017 for each increase in temperature of 1 degrees

b) The safety gap must be 0.33 mm

Explanation:

a)

The linear expansivity of a material is a measure of how much the length of a sample of that material expands per unit increase of temperature.

Mathematically, the linear expansivity can be written as

[tex]\alpha = \frac{\Delta L/L}{\Delta T}[/tex]

where

[tex]\Delta L[/tex] is the change in length of the sample

L is the original length of the sample

[tex]\Delta T[/tex] is the change in temperature of the sample

For instance, in this problem, we are told that the linear expansivity of copper is

[tex]\alpha = 0.000017/K[/tex]

Which means that the relative change of length of the copper, [tex]\Delta L/L[/tex], increases by 0.000017 for each increase in temperature of 1 degrees.

b)

We can re-write the formula written in part a as

[tex]\Delta L = \alpha L \Delta T[/tex]

where, applied to this problem, each variable means:

[tex]L[/tex] is the length of the steel bar

[tex]\alpha[/tex] is the linear expansivity of steel

[tex]\Delta L[/tex] is the change in length of the steel bar when the temperature increases by [tex]\Delta T[/tex]

In this problem, we have:

L = 3 m

[tex]\alpha = 1.0\cdot 10^{-5}/K[/tex]

[tex]\Delta T = 40^{\circ}C-29^{\circ}C=11^{\circ}C[/tex]

Therefore, the change in length of a steel bar is

[tex]\Delta L = (1.0\cdot 10^{-5})(3)(11)=0.00033 m = 0.33 mm[/tex]

Which means that the safety gap between two successive bars must be 0.33 mm.

Learn more about temperature:

brainly.com/question/1603430

brainly.com/question/4370740

#LearnwithBrainly

In an analogy between water and electric current, the flow of water would correspond to the electric current. Electric current is defined as the rate at which charge flows, and can be envisioned as similar to the flow of water moving past a given section in a pipe. The direction of the current is the direction the positive charge would flow, although it's driven by the movement of negatively charged electrons.

In an analogy between water and electric current, if water corresponds to charge, the flow of water would correspond to the electric current. This is because electric current is defined as the rate at which charge flows. Specifically, 1 Ampere (A) is equal to 1 Coulomb per second (1C/s), meaning it represents one coulomb of charge passing through a given area per second, similar to how we might measure the number of water molecules flowing past a specific point in a pipe per second.

Just as water flows from high to low elevation, electric current flows from high to low electrical potential. For example, in a battery, electrons (which carry the charge) will move from the low-potential terminal (negative end) through to the high-potential terminal (positive end). It should be noted that the direction of conventional current is defined as the direction positive charge would flow, even though, in reality, it is the negatively charged electrons that are moving.

https://brainly.com/question/2264542

#SPJ12

2.38Ω

We are given;

We are required to calculate the resistance of the iPhone battery;

R = V/I

Therefore;

R = 5.0 V ÷ 2.1 A

  = 2.38 Ω

Thus, the resistance of the iPhone battery is 2.38Ω

For the resistance of an iPhone battery connected to a 5.0V charger at 2.1A, you can use Ohm's Law to calculate the resistance as approximately 2.38 ohms.

The resistance of a battery is determined using Ohm's Law, where resistance (R) equals voltage (V) divided by current (I). In this case, a 5.0V charger at 2.1A results in a resistance of 2.38 ohms.

The characteristic that changes in each isotope of calcium is the number of neutrons in the nucleus. The atomic number remains the same for all the isotopes.

The characteristic that differs in each isotope of an element, in this case, Calcium (Ca), is D. the number of neutrons in the nucleus. An isotope is a variant of a particular chemical element, and what distinguishes one isotope from another is the number of neutrons. For instance, Ca-40, Ca-42, Ca-43, and Ca-44 hold 20, 22, 23, and 24 neutrons, respectively. The atomic number, which represents the number of protons in an atom, remains the same for all isotopes of an element. Therefore, the number of neutrons in the nucleus is the only characteristic that changes within isotopes of the same element.

https://brainly.com/question/27475737

#SPJ3

The correct answer is D. The only characteristic that varies among the listed calcium isotopes is the number of neutrons in the nucleus.

Since the atomic number of calcium (Ca) is 20, each isotope of calcium has 20 protons. The isotopes listed in the question, Ca-40, Ca-42, Ca-43, and Ca-44, have atomic masses of 40, 42, 43, and 44, respectively.

To find the number of neutrons in each isotope, we subtract the number of protons (which is constant for calcium) from the atomic mass:

- For Ca-40: 40 (atomic mass) - 20 (protons) = 20 neutrons

- For Ca-42: 42 (atomic mass) - 20 (protons) = 22 neutrons

- For Ca-43: 43 (atomic mass) - 20 (protons) = 23 neutrons

- For Ca-44: 44 (atomic mass) - 20 (protons) = 24 neutrons

As we can see, the number of neutrons varies in each isotope, which is the characteristic that is different for each isotope listed.

The other options provided in the question can be ruled out based on the following reasons:

 A. the position in the periodic table of the elements - All calcium isotopes have the same position in the periodic table because they all have 20 protons, which defines their atomic number and thus their position in the periodic table.

B. the net charge of the nucleus - The net charge of the nucleus is determined by the number of protons, which is the same (20) for all calcium isotopes. Therefore, the net charge of the nucleus does not vary among these isotopes.

C. the mass of the protons in the nucleus - The mass of a proton is constant and does not vary from one isotope to another. All calcium isotopes have the same number of protons, so the mass of the protons is not the characteristic that differs among these isotopes.

Answer:

The length of the runway to the nearest meter is 306 m.

Explanation:

Given:

Initial velocity of Christina is, [tex]u=0\ m/s(Rest)[/tex]

Time taken is, [tex]t=5\ s[/tex]

Acceleration experienced by Christina is, [tex]a=24.5\ m/s^2[/tex]

The length of the runway is, [tex]d=?[/tex]

Now, we use Newton's equation of motion that relates the distance, initial velocity, time and acceleration.

So, we have the following equation of motion:

[tex]d=ut+\frac{1}{2}at^2[/tex]

Plug in all the given values and solve for 'd'. This gives,

[tex]d=0+\frac{1}{2}\times 24.5\times 5^2\\\\d=\frac{1\times 24.5\times 25}{2}\\\\d=\frac{612.5}{2}\\\\d=306.25\approx 306\ m(\textrm{Rounding to nearest meter})[/tex]

Therefore, the length of the runway to the nearest meter is 306 m.

Answer:

18%

Explanation:

There are two equal and opposite forces on a floating object: weight and buoyancy.

W = B

The weight of an object is its mass times gravity: W = mg

Buoyancy is the weight of the displaced fluid: W = mf g

Plugging in:

mg = mf g

m = mf

Mass is density times volume:

ρV = ρf Vf

Solving for the ratio of Vf / V:

Vf / V = ρ / ρf

Given that ρ = 0.82 g/mL and ρf = 1.00 g/mL:

Vf / V = 0.82

That means 82% of the object's volume (and therefore, 82% of its mass, assuming uniform density) is submerged.  Which means that 18% is above the water line.

The velocity of sound in at 300C is 511.3 m/s.

Explanation:

The equation that gives the speed of sound in ar as a function of the air temperature is the following:

[tex]v=(331.3+0.6T) m/s[/tex]

where

T is the temperature of the air, measured in Celsius degrees

In this problem, we want to find the speed of sound in ar for a temperature of

[tex]T=300^{\circ}C[/tex]

Substituting into the equation, we find:

[tex]v=331.3 + 0.6(300)=511.3 m/s[/tex]

So, the velocity of sound in at 300C is 511.3 m/s.

Learn more about sound waves:

brainly.com/question/4899681

#LearnwithBrainly

Final answer:

The velocity of sound in air at 30°C is approximately 349 m/s, calculated using the temperature-dependent formula v = 331.4 m/s + 0.6T.

Explanation:

The velocity of sound in air increases with the rise in temperature. At 0°C, sound travels at 331 m/s, and this velocity increases by about 0.6 m/s for each degree Celsius increase in temperature. Given that the temperature is 30°C, we can calculate the speed of sound using the formula v = 331.4 m/s + 0.6T, where T is the temperature in Celsius. Plugging the value of 30°C into the formula gives us v = 331.4 m/s + (0.6 × 30), which equals approximately 349 m/s as the velocity of sound in air at 30°C.

Answer:

C. The procedure scientist use to gain knowledge about the ohysical world

Explanation:

The correct answer is C. The procedure scientists use to gain knowledge about the physical universe.

Explanation:

The scientific method is a non-linear procedure used to answer questions about specific phenomena or understand the world. This method includes a set of steps that are used to create a hypothesis and then tested it successfully. Besides this, the scientific method is applied in most areas related to science because through this scientist can explain or understand the physical universe. According to this, the scientific method can be best described as "The procedure scientists use to gain knowledge about the physical universe".

Answer:

The velocity of the package before hitting the floor is 35.28 m/s.

Explanation:

Given:

The package is dropped, so initial velocity is, [tex]u=0\ m/s[/tex]

Time taken to reach the floor is, [tex]t=3.60\ s[/tex]

The motion is a complete free fall motion.

When the body is in free fall, the only acceleration acting on the body is due to gravity.

Therefore, the acceleration of the package is, [tex]a=g=9.8\ m/s^2[/tex]

Now, final velocity of the package is, [tex]v=?[/tex]

In order to find the final velocity, we need to use the Newton's equation of motion that relates initial velocity, final velocity, acceleration and time taken.

So, the equation of motion used is given as:

[tex]v=u+at[/tex]

Plug in the given values and solve for 'v'. This gives,

[tex]v=0+9.8\times 3.60\\v=35.28\ m/s[/tex]

Therefore, the velocity of the package before hitting the floor is 35.28 m/s.

Answer:

35.316 [tex]m/s[/tex]

Explanation:

Given: [tex]t=3.60\ sec[/tex]

In free fall velocity does not depend upon height of fall.

Now, we will use the relation between final velocity (v) and initial velocity (u) and time (t) under free fall.

That is [tex]v=u+gt[/tex]

Where 'g' is acceleration due to gravity which is [tex]9.81 m/s^2[/tex]

Here initial velocity (u) is zero as package was dropped from rest.

Plugging the values in the equation, we get.

[tex]v=u+gt\\\\v=0+9.81(t)\\\\v=9.81(3.60)\\\\v=35.316\ m/s[/tex]

Hence, the velocity with which the ball will hit the ground will be [tex]v=35.316\ m/s[/tex].

Answer:

Electromagnetic waves do not require a medium to propagate means they  can travel through air and solid material and the vacuum of space too.

they move the fastest through gases mostly because particles in gases are spread out more than the particles in solids or in liquids so they move quickly through gases.

Explanation:

Answer:the realization or fulfillment of one's talents and potentialities, especially considered as a drive or need present in everyone.

Explanation:

your welcome

Answer:

the realization or fulfillment of one's talents and potentialities, especially considered as a drive or need present in everyone.

Explanation:

In other words, for our purposes, self-actualization can be thought of as the full realization of one’s creative, intellectual, or social potential.

Answer:

[tex]0.01132 g/mm^{3}[/tex]

Explanation:

Density, [tex]\rho=\frac {m}{v}[/tex]

Where m is the mass of the object and v is the volume of the same object

Given the dimensions, we can make them in mm hence 45 mm by 52 mm by 60 mm

Volume=45*52*60= 140400 mm^{3}

Density, [tex]\rho=\frac {1590}{140400}=0.011324786 g/mm^{3}\approx 0.01132 g/mm^{3}[/tex]

The actual volume of the liquid is [tex]50 cm^2[/tex]

Explanation:

When doing a measurement, there are two types of errors that we can define:

In this problem we have:

[tex]E_a=0.6 cm^2[/tex] (absolute error)

[tex]E_r = 1.2\%[/tex] (relative error)

Using the formula for the relative error, we can find the actual value of the volume of the liquid:

[tex]V=\frac{E_a}{E_r}\cdot 100 = \frac{0.6}{1.2}\cdot 100 =50 cm^3[/tex]

Learn more about errors:

https://brainly.com/question/2764830

#LearnwithBrainly

Answer:

The largest reservoir of phosphorous is sedimentary rock.

Major sources of phosphorous to aquatic ecosystems are fertilizer runoff, sewage leaks, and industrial wastes.

Eccess phosphorous can lead to eutrophication

Explanation:

Phosphorus come from different sources such as aquatic ecosystems and fertilizers used for plants. When these substances containing phosphorus and those from industrial wastes find their way into water bodies, they tend to cause eutrophication, which is the natural enrichment of water bodies.  

Also, it is known that a very small portion of phosphoric acid contribute to acid rain in the atmosphere.  

Answer:

The statements that are true are:

-The largest reservoir of phosphorous is sedimentary rock

- Major sources of phosphorous to aquatic ecosystems are fertilizer runoff, sewage leaks, and industrial wastes.

- Excess phosphorous can lead to eutrophication.

Explanation:

In nature, phosphorous is found in form of phosphate ions PO₄⁻³, which are forming part of sedimentary rocks. Upon the action of wind and rain, phosphorous is washed into the soil (it dissolves and its passes into the soil in form of phosphate compounds). So, the largest reservoir of phosphorous is sedimentary rock.

Phosporous in the soil is absorbed by animal and plants and it is transformed in biological components (like nucleic acids, phospholipids, etc), and when animal and plants die, phosphorous return to the soil. So, the most of the phosphorous cycle occurs in the Earth (soil, water, living beings). In fact, phosphorous does not circulate through atmosphere.

Human activities such as farming and industry impact in phosphorous cycle. Fertilizers, wastes from human activities and phosphorous-containing products are poured in oceans and they feed the cycle.

But the excess of phosphorous often leads to an overgrowth of algae, which causes a lack of oxygen in water and consequenty the death of aquatic organisms. This fenomena is called eutrophication.

Finally, the major acid found in acid rain is sulphuric acid (it is not phosphoric acid).

Answer:

4 kWh or 4 units

Explanation:

energy = power × time

            = 400 W×  10 h

            = 4000 Wh

           =( 4000/ 1000 )  kWh

            = 4 kWh

             = 4 commercial units

Answer:

B. A line angled upward

Explanation:

velocity is plotted along y- axis and time is plotted along x- axis so we get a line angled upward

Answer:

The frequency should increase.

Explanation:

The wavelength of a wave varies inversely to frequency of the wave.

The relation between the frequency and wavelength of a wave is given as:

[tex]f\lambda=v[/tex]

Here, [tex]f\to frequency\\\lambda\to wavelength\\v\to velocity\ of\ wave[/tex]

Therefore, as the wavelength increases then the frequency will decrease.

Similarly, as the wavelength of the wave decreases, then the frequency will increase.

So, the frequency should increase if you decrease the wavelength of a wave.

Answer:

false

Explanation:

its a trick question. not all evidence should be collected from the crime scene due to not all the evidence be useful.

The question is missing the graph. So, the graph is attached below.

Answer:

The value of [tex]F_{max}[/tex] is 7380 N.

Explanation:

Given:

Mass of the ball is, [tex]m=45\ g=0.045\ kg[/tex]

Initial velocity of the ball is, [tex]u=0\ m/s(Assuming)[/tex]

Final velocity of the ball is, [tex]v=41\ m/s[/tex]

From the graph,

Time interval for which the force acts, [tex]\Delta t=0.5\ ms=0.5\times 10^{-3}\ s[/tex]

Height of the triangle is equal to the maximum force acting on the ball = [tex]F_{max}[/tex]

Now, we know that, impulse acting on the ball is equal to the area under the curve of force and time graph.

So, impulse is equal to the area of the triangle and is given as:

Impulse = [tex]\frac{1}{2}\times base\times height[/tex]

Here, base is time interval [tex]\Delta t[/tex] and height is [tex]F_{max}[/tex].

Impulse = [tex]\frac{1}{2}\times (0.5\times 10^{-3})\times F_{max}[/tex]

Impulse = [tex]0.25\times 10^{-3}F_{max}[/tex]

Now, we also know that, impulse is equal to the change in momentum of a body.

Therefore, change in momentum (Δp) is given as:

[tex]\Delta p=m(v-u)\\\Delta p = 0.045(41-0)=1.845\ kgms^{-1}[/tex]

Now, change in momentum is equal to impulse acting on the ball. Thus,

[tex]0.25\times 10^{-3}F_{max}=1.845\\\\F_{max}=\frac{1.845}{0.25\times 10^{-3}}\\\\F_{max}=7380\ N[/tex]

Therefore, the value of [tex]F_{max}[/tex] is 7380 N.

Answer:

70,000 N

Explanation:

Draw a free body diagram of the Jeep.  There are two tension forces, both pulling the Jeep towards the tree.

The net force is:

ΣF = 2T

ΣF = 2 (35,000 N)

ΣF = 70,000 N

The maximum force that can be exerted on the Jeep due to the cable arrangement is 70000N.

The net force, ΣF ; can be calculated thus :

ΣF = 2 × Tension

Net force = 2 × 35000

Net force = 70,000 N

Therefore, the net force that is exerted on the Jeep is 70,000N.

Learn more : https://brainly.com/question/14035678