a CT air mass is hot and dry. Thus, option C is correct.
Air masses in the desert (which are hot and dry) are referred to be "continental tropical" or "cT" air masses. These air masses may start to develop new characteristics as they travel around the world.
The continental Tropical (cT) air mass is mostly produced during the summer in dry or desert regions in the middle or lower latitudes. Although it is often quite hot, the low moisture content prevents the powerful dry convection from typically reaching the condensation threshold. The cT is the driest air mass and is responsible for the world's belt of subtropical deserts.
Learn more about continental tropics here:
https://brainly.com/question/9463539
#SPJ6
A CT air mass is hot and dry, originating over hot desert regions and characterized by low moisture and high temperatures.
Explanation:An CT air mass, in meteorological terminology, refers to a Continental Tropical air mass. This type of air mass originates over hot and dry regions, often desert regions like the Sahara. Because it forms over land, specifically in tropical regions, it retains low moisture levels, making the air mass hot and dry. The properties of air masses play a significant role in determining the weather and climate of regions they move over. In summary, a CT air mass is characterized by its hot and dry condition.
Learn more about CT air mass here:https://brainly.com/question/29907083
#SPJ6
Analyze the map below and answer the question that follows. Which of the following mountain ranges is labeled with the number 2 on the map above? A. the Pyrenees B. the Apennines C. the Urals D. the Alps Please select the best answer from the choices provided A B C D
Edit: the answer is B.
Answer:
B
Explanation:
Im sorry I was late here
Answer:
IT is the appeninies so it would be be
Explanation:
Which pieces of information are typically seen on a newspaper weather map? Check all that apply.
1. isobars
2. isotherms
3. symbols for fronts
4. symbols for precipitation
5. symbols for long-range predictions
Answer:
2. isotherms
3. symbols for fronts
4. symbols for precipitation
Explanation:
The weather maps in the newspapers can be very simple or more complicated, depending on what should be depicted on it. In general, these maps almost always include isobars, which provide information about the air pressure. The symbols about the fronts are also often included, as they show what kind of air masses are active or will be active in the area. The symbols for precipitation always get included because they are one of the primary interest of the people, as well as providing information about the type of precipitation and its amount.
Answer:
Just took the unit test review and the answer is 3 and 4
Explanation:
Victoria falls is located on which river
Victoria Falls Is Located On The Zambezi River.
P.S It's A Beautiful Place To Visit I Have Been There Once And It Was Beautiful.
Have A Nice day,
Eric
Victoria falls is located on the Zambezi river.
Explanation:
Zambezi river is the fourth largest in the whole world and the falls is considered as a splendid tourist site. This fall is considered to be the only falls that has length of over one kilometer and height is more than a hundred metres.
The sound of the falls is audible from over a whopping 40 kilometers while the spray and the mist rising from these falls is visible from over 50 kilometers. The river separates Zimbabwe and Zambia.
who was the first person to calculate the circumstance of the earth and coined the word geography
whats up.
The first person to calculate the circumference of the Earth and coined the word "geography" was Eratosthenes. The man who successfully applied his scientific research to create an illustration of the first world map was Anaximander.
which increased as a result of the industrial revolution?
Check all that apply
A. pollution
B. travel times between cities
C. food prices
D. population
ANSWER:
The correct options are A. Pollution and D. Population. As a result of industrial revolution, pollution and population were increased.
EXPLANATION:
Pollution increased because of setting up of several industries and factories which worked using raw materials and emitted harmful substances as wastes into the air as well as water. Population increased because industrial revolution led to the interaction of people from various regions. Also the need for more labour resulted in the increase in population because it was a general belief that more the number of hands, more would be the income.japan is blank of india
plz help
It’s not Japan has nothing to do with India
A food chain describes a linear path of feeding relationships among organisms along which (blank) moves within an ecosystem
The correct answer is - energy.
The food chain is the linear path of feeding relationship among organisms along which energy moves up in the ecosystem. There's two basic types of organisms, producers and consumers. The producers are the ones that use the natural elements to produce their own food. The consumers get food by eating the producers, and up the hierarchy they eat other consumers. At the top of the food chain are positioned the predators.
Which two species do you think are most closely related?
here is the answer to the question
Which type of clouds are shown?
Answer: Cirrocumulus
Explanation:
The clouds shown in the image are Cirrocumulus clouds as they appear as thin, wavy layers or small ripples and often indicate fair weather conditions.
Hence, the correct answer is option a.
Cirrocumulus clouds are a type of high-level cloud that forms at altitudes above 20,000 feet (6,000 meters). They appear as thin, white, and delicate cloud patches or small ripples, often arranged in rows or groups. These clouds are composed of ice crystals and are typically smaller than other cloud types, giving them a fine and textured appearance.
Cirrocumulus clouds are often associated with fair weather conditions and are commonly referred to as "mackerel sky" due to their resemblance to the scales of a fish. They can indicate the presence of an approaching warm front or a change in atmospheric conditions.
Know more about Cirrocumulus clouds here:
https://brainly.com/question/32609563
#SPJ2
The given question is incomplete. Hence, the complete question is:
Which type of clouds are shown?
a. cirrocumulus
b. cumulonimbus
c. cumulus
d. stratus
What happens during a committee hearing process? (Site 1)
Hearings. One of the standard activities that committees undertake with legislation is to hold a hearing on the proposed legislation. ... If a subcommittee holds a hearing on a bill, the full committee generally does not repeat the process.
ANSWER:
Committee hearing process is a procedure which is set by the US government congressional member. These members are responsible for collection of information and analyzation is done in the earlier stage if the country is making any new policy.EXPLANATION:
In the hearing process it is conducted through questions and answers. The witness is put forward and asked which is followed by integration of questions and answers in which the decision and statements are made by the following members of Congress.What has been the greatest environmental impact as a result of the tsunami?
a. The destruction of mangroves and coral reefs
b. The infiltration of salt water and drinking supplies and farmland
c. Destruction of sewage collectors and water treatment plants
d. Severe damage done to sand dunes and rock formations
Answer:
b. The infiltration of salt water and drinking supplies and farmland
Explanation:
Although all the options are valid in relation to the damages caused by a tsunami, these damages are part of the natural cycle that marine and coastal life faces. However, the filtration of salt water affects the terrestrial ecosystem by contaminating vital aquifers for many terrestrial animals, and also for humans, creating a greater environmental impact.
Also, contamination with salt from farmland leads to a decrease in local cultivation and fertile land around coastal areas.
I hope this information can help you.
Answer: B. I just took the test
strategies used to reduce impacts of volcano (mount etna)
Pre-Awareness to prepare for the eruption of the volcano
ANSWER:
Strategies used to reduce impacts of volcano are to listen for emergency information and message about the event.
EXPLANATION:
Volcanoes is defined as the eruption or the rupturing the plates which is attached to the earth. The process will allow certain particles to be released during the process such as hot lava, volcanic ash. So these disasters could be prevented from follow certain procedures. People should not go to the area which are downstream of the eruption. It is suggested not to drive in these heavy ash fall.Which of the following is a reason why Hartsfield-Jackson International Airport provides so many jobs to Georgians?
A) It is required to hire many people because it receives tax money for its operations.
B) It is partnered with the armed forces, so many of its employees are military personnel.
C) It is owned by the state government, so it will only hire people who are residents of Georgia.
D. It is one of the busiest airports in the country, and a diverse array of jobs need to be filled to keep the airport running.
The correct answer is - D. It is one of the busiest airports in the country, and a diverse array of jobs need to be filled to keep the airport running.
The Hartsfield-Jackson International Airport is one of the largest airports in the United States, in fact it is ranked on the seventh place. Not that it is very large, but it has over one million flights per year, making it one of the airports with very high traffic. Because the airport is so large, and it has so many flights, lot of workers are needed for all sorts of things, be it connected directly with the flights, making ans serving food and beverages, renting cars, pretty much any other service that is offered and demanded by the travelers. It is no wonder why there are so many employees, and it is actually one of the biggest employers in Georgia.
Which of the following would survive in a semi-arid to arid region of the western United States? a. short grasses and cacti b. tall deciduous trees c. tall coniferous trees d. tropical vegetation
Answer:
a. short grasses and cacti
Explanation:
The semi-arid and arid areas in the western part of the United States are harsh environments, and only specialized plants for these conditions can survive. The climate is hot and dry, the precipitation very low, and the soil is poor. The plants that survive in these places have adapted well to survive with very little water, to manage to extract water from the air, to preserve it, and being able to sustain very high temperatures. The short grasses are the dominant plants int he semi arid regions. They do not require rich soil, nor lot of water, so they manage to survive on the bear minimum that is available. The trademark plants of the arid areas are the cacti. The cacti are able to store large amounts of water in them, have very long roots, are able to extract water from the air through their needles, and also have skin that doesn't allow any water to come out of it.
These three empires were ended by World War 1
The Russian Empire in 1917, the German and the Austro-Hungarian in 1918, and the Ottoman in 1922 were all ended in WW1.
Drag the tiles to the boxes to form correct pairs. Match each type of heat transfer method with its description
1. Convection
2. Radiation
3. Conduction
Hope this helps!
The correct matches of heat transfer method with its description are: a. conduction - iii. occurs during physical contact between solid objects not in thermal equilibrium, b. convection - i. relates to density differences within fluids, c. radiation - ii. does not require a medium or physical contact to transfer heat
Conduction is the transfer of heat between objects that are in direct physical contact. It occurs when heat energy flows from a region of higher temperature to a region of lower temperature. For example, if you touch a hot pan, heat is transferred to your hand through conduction.
Convection is the transfer of heat through the movement of fluids, such as liquids or gases. It is driven by density differences within the fluid. When a fluid is heated, it becomes less dense and rises, while cooler, denser fluid sinks. This creates a circular motion called a convection current. An example of convection is boiling water in a pot. The hot water rises to the top, while the cooler water sinks to the bottom.
Radiation is the transfer of heat through electromagnetic waves, such as infrared radiation. Unlike conduction and convection, radiation does not require a medium or physical contact to transfer heat. For instance, the heat from the sun reaches the Earth through radiation. The energy from the sun travels through space and warms the Earth's surface.
Learn more about Heat here:
https://brainly.com/question/934320
#SPJ6
The complete question is, "Match each type of heat transfer method with its description.
a. conduction
b. convection
c. radiation
i. relates to density differences within fluids
ii. does not require a medium or physical contact to transfer heat
iii. occurs during physical contact between solid objects not in thermal equilibrium"
Which law did the government pass in order to encourage competition in the economy?
the Federal Anti-monopoly Act
the Sherman Antitrust Act
the Contraction Act
the Civil Rights Act
ANSWER:
The Sherman Antitrust Act was passed by the government to encourage competition in the economy.
EXPLANATION:
This act was passed in 1890 almost unanimously and focused on the existence of fair competition and trade practices in an economy. The Act restrains the abuse of monopoly in an economy. The Act also regulated trade practices to ensure that an economy thrives on competition which is healthy and benefiting for the economy. The Act also encouraged the formation of a "free market economy".Answer:
B
Explanation:
Select the correct answer. A number is selected at random from the set {2, 3, 4, ... 10}. Which event, by definition, covers the entire sample space of this experiment? A. The number is greater than 2. B. The number is not divisible by 5. C. The number is even or less than 12. D. The number is neither prime nor composite. E. The square root of the number is less than 3.
C. The number is even or less than 12
Explanation:
Number 2 can be selected randomly and According to option A the number selected should be greater than 2.
B option is saying that the number is not divisible by 5 but the sample set contains { 2,3,4,5,6,7,8,9,10} . 5 and 10 can be selected and they are divisible by 5.
According to C even number can be selected or the numbers that are lesser than 12. The word "or" should be note here . Any number even or odd may be selected but it will be lesser than 12 so this will be the correct option.
Every element of sample set is either prime or composite so the selected number can either be prime or composite
Square root of 9 is 3 and square root of 10 is greater than 3. Statement will not be correct if number 9 or number 10 got selected the
Answer:
C. The number is even or less than 12. (for plato users.)
Explanation:
I took the test trust me.
Is the earth flat or round?
It’s like an oval so round I should say
Answer:
round
Explanation:
because god made it that way
What caused the Ring of Fire?
a. Movement and collisions of crystal plates
b. The lack of dormant volcanoes in the region
c. The motion of fault lines causing numerous small earthquakes
d. A series of trenches and arcs
c. The motion of fault lines causing numerous small earthquakes
The ring of fire surrounds the pacific plate... A high concentration of volcanoes and earthquake show the area commonly known as the ring of fire
The cause of the Ring of Fire is a. Movement and collisions of crustal plates. This vast ring of volcanic and seismic (earthquake) activity is the result of the dynamics of tectonic plates. It encompasses a path along the Pacific Ocean characterized by active volcanoes and frequent earthquakes.
The Ring of Fire is caused by the movement and interactions of several tectonic plates in the Pacific Ocean region. Convergent and transform plate boundaries lead to subduction zones, where one tectonic plate moves under another, melts due to the intense pressure and heat, potentially causing volcanic eruptions and earthquakes in the process. This geological activity has form volcanic arcs and oceanic trenches, marking the boundaries of these tectonic interactions. The Pacific Ring of Fire is therefore a direct result of these tectonic processes. Historical volcanic eruptions, such as that of Mount Tambora and Krakatoa, underline the significance and impact of this tectonic activity. Furthermore, the seismic events that accompany these subduction processes pose significant natural hazards to the countries surrounding the Pacific Ocean.
Can someone please please help me??
There is a picture and I will mark a brainliest!! :)
Mollusks are invertebrates such as the common snail. Most mollusks have shells. Annelids are worms such as the familiar earthworm. They have segmented bodies
hope this helps :D
If you can select more than one, everything except for sea anemones have segmented bodies.
How do oceanographers measure the different densities out in the open ocean
The salinity of ocean water can be determined by measuring the conductivity of the water. The characteristics of water such as salinity, depth, temperature, density can be defined by the instrument called Conductivity Temperature Depth instrument. Using this technique oceanographers determine the salinity of water.
HOPE THIS HELPED!!!! XD
Can i have brain please?
Oceanographers do measure the density of ocean water by actually taking a sample of sea water out of the ocean and then taking it to the laboratory to be measured.
What is the Density of the Ocean Water?The two key factors that affect the density of sea water are known to be;
SalinityTemperature.There is said to be an indirect relationship that exist between the sea water temperature and also the density.
Learn more about oceanographers from
https://brainly.com/question/977380
how to grow plants in space?
You need to know if the condition of the soil is ideal for planting, the soil should also have remaining nutrients. If the gas does not support plants, even if it started, 60 days after, will not let it grow. If these conditions match, there should be little risk. But don't forgot to bring water, my ideal planet to grow plants is the planet after Earth, Mars. Scientist thought Mars was ideal for humans beings to live.
Final answer:
To grow plants in space, scientists are conducting research and experiments to understand the effects of microgravity on plant growth. Plants can provide a life support system by regenerating the atmosphere, purifying water, and producing food. Challenges in growing plants in space include gravity differences and water behavior in microgravity.
Explanation:
Growing Plants in Space
For humans to travel to space and other planets, it is important to understand how to grow plants in extreme climates. Plants can provide a life support system by regenerating the atmosphere, purifying water, and producing food. Some studies have shown that plant growth and development are not affected by gravity, but there is still uncertainty about structural changes in plants grown in a microgravity environment. However, astronauts have successfully grown plants in space, such as the first flower that bloomed on the International Space Station.
Challenges of Plant Growth in Space
There are several challenges in growing plants in space. Gravity is different in space, so plants may not grow in the same way as they do on Earth. Water behavior is also different in microgravity, and it may not reach the plant roots as effectively as it does on Earth. Scientists are studying these factors to better understand how to cultivate plants in space.
Research and Experiments
Scientists are conducting research and experiments to study plant behavior in space. They send weeds and other plants to space to observe how they grow and develop on a molecular level. These experiments help scientists understand the effects of microgravity and extreme climates on plant growth. The goal is to eventually establish sustainable plant cultivation systems for long-duration space missions.
Define the three kinds of load that make up the particles a stream carries.?
Streams transport sediments as bed load, suspended load, and dissolved load. Bed load travels along the bed in traction and saltation, suspended load is carried within the water, and dissolved load consists of water-soluble ions.
The three kinds of load that make up the particles a stream carries are referred to as bed load, suspended load, and dissolved load. The bed load consists of the largest and densest particles that are transported along the stream bed, primarily through two types of movement: traction, which is the rolling and sliding of particles, and saltation, which is a bouncing motion. The suspended load includes finer particles that are carried within the water column, suspended due its turbulent flow. Lastly, the dissolved load contains ions from chemical weathering that are carried in solution, and these ions include substances like bicarbonate, calcium, chloride, potassium, and sodium.
Why does sky appear blue and cloud appear white?
Blue light is scattered in all directions by the tiny molecules of air in Earth's atmosphere. Blue is scattered more than other colors because it travels as shorter, smaller waves. This is why we see a blue sky most of the time.
First, let’s talk about the composition of a cloud. Clouds are composed of tiny round water droplets, which form when water vapor condenses from a gas to a liquid.
Next is the electromagnetic spectrum. The sun emits energy over a wide rangem and humans aren't able to see most of that energy with the naked eye. We're only able to see the visible spectrum: red, orange, yellow, green, blue and violet light. When those colors are combined, we see white light.
As the sun’s light passes through these small cloud droplets, it scatters. In other words, it’s pushed out of the droplet in all different directions.
Unlike scattering in the sky or ocean, in which molecules are so small they only scatter blue and violet light, water droplets are large enough the scatter the entire spectrum.
That's why clouds appear to be mostly white.
Bes regards
Answer:
But in a cloud, sunlight is scattered by much larger water droplets. These scatter all colours almost equally meaning that the sunlight continues to remain white and so making the clouds appear white against the background of the blue sky.
Explanation:
The sky appears blue because of a phenomenon called Rayleigh scattering. When sunlight enters the Earth's atmosphere, it is made up of different colors of light, each with a different wavelength. The shorter wavelengths of light, such as blue and violet, are scattered more by the molecules in the atmosphere compared to the longer wavelengths, such as red and orange. This scattering of shorter wavelengths causes the blue light to be redirected in different directions, making it appear to come from all parts of the sky.
Clouds, on the other hand, appear white because of a different type of scattering called Mie scattering. Clouds are made up of tiny water droplets or ice crystals. These particles are much larger than the molecules in the atmosphere and can scatter all wavelengths of light equally. As a result, when sunlight passes through a cloud, the light is scattered in all directions, giving the cloud a white appearance.
It's important to note that clouds can also appear gray or dark when they become thicker or when they block more sunlight. This happens because the cloud particles absorb and scatter more sunlight, reducing the amount of light that reaches our eyes.
In summary, the sky appears blue due to the scattering of shorter wavelengths of light by the molecules in the atmosphere, while clouds appear white due to the scattering of light by the water droplets or ice crystals they contain.
The sky appears blue because of the way light from the sun interacts with the molecules in our atmosphere. The blue light is scattered more than other colors because it travels as shorter waves. Clouds appear white because they are made up of tiny water droplets that scatter all colors of light, making them appear white.
The sky appears blue because of a phenomenon called Rayleigh scattering. When sunlight reaches Earth's atmosphere, it encounters tiny molecules of air, such as nitrogen and oxygen. These molecules are much smaller than the wavelength of light, and as a result, they scatter the sunlight in all directions. However, the shorter wavelength blue light is scattered more than the other colors in the visible spectrum, like red and green. This is because the blue light has shorter, smaller waves, which makes it more likely to interact with the molecules and get scattered.
As a result, when we look up at the sky during the day, we see this scattered blue light coming from all directions, giving the sky its blue appearance.
Now, let's talk about clouds. Clouds are made up of tiny water droplets or ice crystals suspended in the air. These droplets are much larger than the molecules in the atmosphere, which means they interact with light differently.
When sunlight passes through a cloud, the light gets scattered by the water droplets in a process called Mie scattering. Unlike Rayleigh scattering, Mie scattering scatters all colors of light more or less equally, rather than favoring blue light. This is because the water droplets are larger and can scatter all wavelengths of light.
As a result, when we look at a cloud, we see the scattered light from the water droplets, which appears as white. The cloud appears white because it is reflecting and scattering all the colors of sunlight that reach it.
What are two things you can do, particularly as a Christian, to conserve water.
Select all that apply
Water your lawn during the middle of the night
Use only cold water to wash the dishes
Fix leaks in pipes, faucets, or hoses
Water you lawn in the early morning
Answer:
Fix leaks, in pipes, faucets, or hoeses
Ms. Johns shows her class a correct model of the Solar System. What can the model that is just like the real solar system?
A) how heavy Earth is
B) how fas the Sun spins
C) how many planets there are
D) how big the Solar System
The answer is C: How many planets are in the solar system
How do oceanographers measure the different densities out in the open ocean
? and why
is it important?
Final answer:
Oceanographers utilize tools like hydrometers to measure ocean water density, which is essential for understanding buoyancy, submarine currents, and the global carbon cycle. The biological pump's role in transferring CO2 to the deep ocean is a crucial aspect of climate regulation. Density's influence on marine life and the principle of specific gravity are also vital in oceanographic studies.
Explanation:
Oceanographers measure the different densities in the open ocean using various methods, one of which is by employing a device such as a hydrometer. A hydrometer measures the fraction of a floating object that is submerged and determines the density of the ocean water at that point.
This measurement is critical because density is key to understanding many oceanographic processes, including buoyancy and the behavior of submarine currents. Furthermore, ocean density plays a significant role in the global carbon cycle, notably through the biological pump, which transports CO2 from the surface ocean to the deep ocean, effectively removing it from the atmosphere and mitigating climate change.
Density can also indicate the health of marine ecosystems, as it influences the distribution of nutrients and the growth of phytoplankton, which are foundational to the oceanic food web. The ratio of the density of an object to a fluid is known as specific gravity, another important concept in evaluating substance interactions in the ocean.
Understanding the relationship between density and Archimedes' principle helps explain why objects float or sink, which is fundamental to marine engineering and navigation.
The idea that the processes that formed the earth have taken more than thousands of years instead of quickly I’d known as?
Answer:
gradualism
Explanation:
This question is incomplete. The complete question is:
The idea that the processes that formed the earth have taken more than thousands of years instead of quickly is known as _____.
.catastrophism .punctualism .gradualism .movement uniformism
Answer:
The correct answer is gradualism.
Explanation:
Gradualism is a school of thought referred to Earth sciences. It is about explaining that the geological characteristics of the Earth were created through slow processes, unlike the catastrophic school that proposed the opposite, as the name implies, that these characteristics were produced by violent and catastrophic events.
While these two schools were great rivals, today scientists established that both actions took place in the formation of the Earth's surface.
According to James Hutton and Charles Lyell, the great changes produced in the earth's surface are due to small changes that were happening for a long time and that were accumulating.
Some of the processes involved in gradualism are erosion, weathering and plate tectonics.
Therefore, seeing all this information we can say that the correct answer to the question is gradualism.
The phase of the moon depends on what three three things
Instead, the Moon's phase depends only on its position relative to Earth and the Sun. The Moon doesn't make its own light, it just reflects the Sun's light as all the planets do. The Sun always illuminates one half of the Moon
mark brainliest :)
The phase of the moon depends on the changing angle of its illumination by the Sun, the Moon's monthly cycle of phases, and the Moon's movement eastward each day in its monthly path around Earth.
Explanation:The phase of the moon depends on three things: the changing angle of its illumination by the Sun, the Moon's monthly cycle of phases, and the Moon's movement eastward each day in its monthly path around Earth.
As the Moon orbits Earth, the angle at which the Sun's light hits the Moon changes, resulting in different phases. The Moon's revolution and rotation periods are the same, so it always keeps the same face toward Earth.
The Moon takes about 29.5 days to go through its entire cycle of phases, from new moon to full moon and back to new moon again.
Learn more about Moon phases here:https://brainly.com/question/31392459
#SPJ3