A horizontal rope is tied to a 50.0kg box on frictionless ice. What is the tension in the rope if,

A. the box is at rest
B. the box moves at a steady 5.0m/s
C. the box has v_x=5.0m/s and a_x=5.0m/s²

Answer:

The time is 0.428 hr.

Explanation:

Given that,

Final speed = 108 mph

Initial speed = 80 mph

Distance = 12 miles

We need to calculate the time

Using formula of time

[tex]v = \dfrac{d}{t}[/tex]

d = distance

t = time

Put the value into the formula

[tex]108-80=\dfrac{12}{t}[/tex]

[tex]t = \dfrac{12}{108-80}[/tex]

[tex]t =0.428\ hr[/tex]

Hence, The time is 0.428 hr.

Answer:

4

Explanation:

Answer: elastic potential energy

Explanation:

The form of energy stored in the string of the bow is elastic potential energy. Elastic potential energy is the energy stored in an elastic object (such as the string of a bow) when the object is compressed/stretched by a certain amount x with respect to its natural length. The elastic potential energy stored in the object is given by

[tex]U=\frac{1}{2}kx^2[/tex]

where k is the spring constant of the elastic string, and x is the compression/stretching.

Final answer:

The weight of the brass washer is 82.3 grams.

Explanation:

The weight of the brass washer can be calculated using its density and volume. The volume of the washer can be found by subtracting the volume of the hole from the volume of the outer cylinder. The formula for the volume of a cylinder is πr^2h, where r is the radius and h is the height.

Given that the outside diameter is 4.50 cm, the radius is half of that, which is 2.25 cm (or 0.0225 m). The height of the washer is 1.50 mm, which is 0.0015 m. Using these values, we can calculate the volume of the washer:

Volume = π(0.0225)^2(0.0015) = 9.5747 x 10^-6 m^3

Now, we can calculate the weight of the washer using its volume and density:

Weight = Volume x Density = 9.5747 x 10^-6 m^3 x 8599 kg/m^3 = 82.3 g

Final answer:

The weight of the brass washer on a laboratory balance would be 59.5 grams.

Explanation:

To find the weight of the brass washer, we need to calculate its volume and then multiply it by the density of brass. The volume of the washer can be found by subtracting the volume of the hole from the volume of the outside part of the washer.

The volume of the outside part of the washer can be calculated using the formula for the volume of a cylinder: V = π[tex]r^2[/tex]h. In this case, the radius (r) is half the outside diameter, so r = 4.50 cm / 2 = 2.25 cm = 0.0225 m. The height (h) is the thickness of the washer, which is 1.50 mm = 0.0015 m. Plugging these values into the formula gives us V = π(0.0225 [tex]m^2[/tex](0.0015 m) = 7.21 x [tex]10^{-6}[/tex] [tex]m^3[/tex].

The volume of the hole can also be found using the formula for the volume of a cylinder, since it is cylindrical in shape. The radius (r) of the hole is half the hole diameter, so r = 1.25 cm / 2 = 0.0125 m. The height (h) of the hole is the same as the thickness of the washer, which is 0.0015 m. Plugging these values into the formula gives us V = π(0.0125 [tex]m^2[/tex](0.0015 m) = 2.94 x [tex]10^{-7}[/tex] [tex]m^3[/tex].

Now, we can find the volume of the washer by subtracting the volume of the hole from the volume of the outside part: V_washer = 7.21 x [tex]10^{-6} m^3[/tex] - 2.94 x [tex]10^{-7} m^3[/tex] = 6.92 x [tex]10^{-6} m^3[/tex].

Finally, we can calculate the weight of the washer using the formula W = V_washer * density. Plugging in the values gives us W = 6.92 x [tex]10^{-6} m^3[/tex] * 8599 kg/[tex]m^3[/tex] = 5.95 x [tex]10^{-2}[/tex] kg = 59.5 g.

Answer:

The object has larger mass. Examples would be like-cars of a different build driving at the same mph, or animals that typically run at the same speed but have different weights.

Explanation:

The more inertia that an object has, the more mass that it has.

To find the range, maximum height, and speed at impact of a projectile fired with an initial speed of 500m/s and angle of elevation 30 degrees, we can use the equations of projectile motion.

To find the range, maximum height, and speed at impact of a projectile fired with an initial speed of 500m/s and angle of elevation 30 degrees, we can use the equations of projectile motion.

Range: The horizontal distance covered by the projectile is the range. In this case, we can use the formula:

R = (V02 * sin(2θ)) / g

where R is the range, V0 is the initial speed, θ is the angle of elevation, and g is the acceleration due to gravity.

Substituting the given values into the formula, we have:

R = (5002 * sin(2 * 30)) / 9.8

R = (250000 * sin(60)) / 9.8

R ≈ 1450.83 meters

Maximum Height: The maximum height reached by the projectile can be found using the formula:

H = (V02 * sin2(θ)) / (2 * g)

Substituting the given values into the formula:

H = (5002 * sin2(30)) / (2 * 9.8)

H ≈ 3060.45 meters

Speed at Impact: The speed at impact is the magnitude of the velocity of the projectile when it hits the ground. Since the projectile is fired at an angle and lands at a lower height than its initial position, the speed at impact will be lower than the initial speed. However, we need more information to calculate the exact speed at impact.

So,a)It will hit ground at 4.52seconds.b)At 145 ft/s fast is it going at the time of impact

An object is dropped from a 400-ft tower:

a) When does it hit the ground? Using the formula: time = [tex]\sqrt[1]{2*height/g}[/tex], where g is the acceleration due to gravity (32 ft/s²), the time taken to hit the ground is approximately 4.52 seconds.

b) How fast is it going at the time of impact? The velocity of the object when it hits the ground can be calculated as velocity = g * time, which gives a velocity of about 145 ft/s.

Answer:

The efficiency of a screw is low because of friction.

Explanation:

A screw is a simple machine that is used to convert a torque to linear force and rotational motion to linear motion. The efficiency of a screw is given by :

[tex]\eta=\dfrac{Fl}{2\pi T}[/tex]

Where

l = pitch distance in mm

T = torque in N-m

The efficiency of screw is less because the output is less as compared to input or there is more input than output. This implies that there is more friction.

Hence, the correct option is (b) "friction".

The backpack was lifted 1.25 meters high, and it weighed approximately 26.977 pounds.

To determine how high you lifted the backpack, we can use the formula for work done against gravity, which is W = F × h, where W is work (in joules), F is force (in newtons), and h is height (in meters). Since you did 150 joules of work to lift a 120-N backpack, we can rearrange the formula to solve for height (h): h = W / F = 150 J / 120 N = 1.25 meters. You lifted the backpack 1.25 meters high.

To find out how much the backpack weighed in pounds, we use the conversion factor that 1 newton is approximately equal to 0.224809 pounds. Therefore, 120 N × 0.224809 lb/N = 26.977 pounds. The backpack weighed approximately 26.977 pounds.

Answer:

There are not enough neutrons to overcome the electrical repulsion of the protons.

Explanation:

Neutrons help stabilize a nucleus by attracting other nucleons (protons and neutrons). Although protons also attract other nucleons using the strong nuclear force, they repel other protons with the electrical force.

Hope this helps!

its A i know my science

it would decrease the distance

The correct answer you are looking for is "A". Have a great day!

Answer:a

Explanation:test

Final answer:

A moving truck has more kinetic energy than a parked truck.

Explanation:

In physics, potential energy is the energy that an object possesses due to its position or condition. When comparing a moving truck and a parked truck, the moving truck has more kinetic energy than the parked truck.

Answer:

C. The amount of space that a sample of matter takes up.

Explanation:

Volume is defined as the 3 dimension shape which is enclosed by a closed surface. It is defined that the space which is occupied by the substance.

The volume is defined in the cubic units.

The volume of container generally is the classification of the amount of space which the substance hold rather than the space which is displaced by the container itself.

Volume is the amount of space that a sample of matter takes up.

Volume is best defined as the amount of space that a sample of matter takes up. It is a measure of how much space an object occupies. Volume can be expressed in different units such as cubic meters, liters, or milliliters.

https://brainly.com/question/31946306

#SPJ6

Answer:

If the racetrack’s length is 36 inches and is set to a height of 8 inches, 16 inches and 24 inches and each roll of the toy car is 7.8 seconds, 7.3 seconds and 6.6 seconds respectively, then, it only shows that the higher the racetrack, the faster the toy car will roll down because velocity, which measures how fast something is moving, is affected by gravity. Motion, as shown in this kind of scenario, is a kind of concept that depicts movement or change in position under given circumstances or factors over a period of time.

Explanation:

Internal energy is the total potential and kinetic energies in a substance, and thermal energy is the part of internal energy that can be transferred to another substance. The answer on edge would be C.

The hydraulic pressure on sample is [tex]3.35*10^{7} N/m^{2}[/tex].

Hydraulic pressure is the force imparted per unit area of a liquid on the surfaces which it has contact.

The magnitude of force acting on the small cylinder is equal to [tex]F_{N}[/tex].

In static equilibrium, all the torques should add up to zero:[tex]F_{N}l - 270(2l)= 0\\F_{N} = 270(2)\\F_{N} = 540 N[/tex]

The pressure applied to the fluid (through the small cylinder):

[tex]P= \frac{540}{\pi (\frac{2*10^{-2} }{2} )^2}[/tex]

[tex]P = 1.71*10^{6} Pa[/tex]

The force of fluid on the large cylinder:

[tex]F= P\pi R^{3} \\F= 1.71*10^{6} \pi (0.05^{2} )\\F= 1.34*10^{4} N[/tex]

The pressure on the sample:

[tex]P_{S} =\frac{F}{A} \\P_{S}= \frac{1.34*10^{4} }{4*10^{-4} } \\P_{S}= 3.35*10^{7} N/m^{2}[/tex]

To learn more about Hydraulic pressure here

https://brainly.com/question/857286

#SPJ2

Answer:

449.824 kg

Explanation:

F = Gm₁m₂/r²

Above equation can be used to find the gravitational force between two objects.

Here F is the Gravitational force. m₁ , m₂ are the masses of the objects and r is the distance between the objects. Let's take m₁ as the mass of the moon. Then m₂ is the mass of the satellite.

We are given that F = 324 N , m₁ = 7.3 * 10²²kg and r = 2.6 * 10 ⁶m.

              324  =  6.67×10⁻¹¹ × m₁ × 7.3×10²² / (2.6 × 10⁶)²

                  m₁ = 449.824 kg

Answer:

answer above is right just round its 450kg

Explanation:

The correct answer is

C. reduce the friction between its moving parts

In fact, by reducing the friction between the moving parts of the machine, it is possible to reduce the energy wasted due to this friction; therefore, more input energy is converted into useful work, and this will improve the efficiency of the machine.

Answer: We can reasonably improve a machines ability to do work by reducing the friction between the moving parts of machine. The correct answer is C.

Explanation:

According to the law of conservation of energy, the energy can neither be created nor destroyed. The energy can be converted from one form to another.

The energy is wasted due to the friction. It reduces the efficiency of the machines to do the work. There will be energy loss due to the friction. By reducing the friction, More energy can be converted into the work.

Therefore, we can reasonably improve a machines ability to do work by reducing the friction between the moving parts of machine.