Final answer:
A net force acting on an object causes a change in the object's momentum, which is explained by Newton's second law. External forces can be visualized with a free-body diagram to determine the net force acting on an object.
Explanation:
A net force acting on an object will always cause a change in the object's momentum. According to Newton's second law of motion, the net force is proportional to the rate of change of momentum and is also equal to the mass of the object multiplied by its acceleration (F=ma). This means that when a net external force is applied to an object with mass, it will experience acceleration, and thus, a change in momentum. External forces acting on the object can be visualized using a free-body diagram to help determine the net force.
It's also important to differentiate between the concepts of mass and weight. Mass is the quantity of matter in an object, and weight is the gravitational force acting on that mass. When an external force is applied, including gravitational force, and there is no other force to counteract it, the object will undergo acceleration as per Newton's second law.
In addition to plate tectonics, what is the other main driving force of the rock cycle?
A. Density
B. Water Flow
C. Texture Change
D. Lahars
Answer: Option B
Explanation:
Rocks contains pores and spaces in them in which water gets trapped, and this causes the rock to break as water increases its volume due to freezing. This rocks are then eroded and are carried away into the streams and channels. The rivers and streams can carry particles of various shapes and size, which are further transported and deposited at a different place.
This particles or sediments then gets compacted and lithified in due course of time, and forms sedimentary rocks.
Water is also needed to undergo metasomatism process, that creates a metamorphic rock.
Hence, water flow is also an important driving force in rock cycle, along with tectonic activities.
Thus, the correct answer is option (B).
Answer:
The water flow because it shapes rocks
Explanation:
If a substance is changing from a vapor to a liquid, like steam on a mirror, it is said to be _______.
volatile
condensing
crystallized
changing pigmentation
Answer:
condensing
Explanation:
Condensing is the word used to indicate the change of state of a substance from vapor to liquid, as in this case. During condensation, the substance releases thermal energy to the environment, therefore the kinetic energy of the molecules in the vapor decreases until they become closer to each other and they start to be affected by the intermolecular forces and so the substance becomes a liquid.
Answer: condensing
Explanation: I took the test
How to calculate displacement in physics?
Answer:Displacement is the distance travelled in a specified direction.
:. Displacement = distance x time
Explanation:
I hope that was helpful?
Mark as brainliest answer!
A ramp leading to the freeway overpass is 210 feet long and rises 31 feet. what is the measure of the angle formed between the ramp and the freeway?
Final answer:
To find the measure of the angle formed between the ramp and the freeway, we can use trigonometry.
Explanation:
To find the measure of the angle formed between the ramp and the freeway, we can use trigonometry. The angle can be found using the inverse tangent function, which relates the length of the side opposite the angle (the rise) to the length of the side adjacent to the angle (the length of the ramp).
We can use the formula:
angle = arctan(rise/run)
In this case, the rise is 31 feet and the run is 210 feet. Plugging these values into the formula, we get:
angle = arctan(31/210)
Using a calculator, we find that the measure of the angle is approximately 8.2 degrees.
Two planets have the same surface gravity, but planet b has twice the radius of planet
a. if planet a has mass m, what is the mass of planet b?
The mass of planet B is 4m
[tex]\texttt{ }[/tex]
Further explanationNewton's gravitational law states that the force of attraction between two objects can be formulated as follows:
[tex]\large {\boxed {F = G \frac{m_1 ~ m_2}{R^2}} }[/tex]
F = Gravitational Force ( Newton )
G = Gravitational Constant ( 6.67 × 10⁻¹¹ Nm² / kg² )
m = Object's Mass ( kg )
R = Distance Between Objects ( m )
Let us now tackle the problem !
[tex]\texttt{ }[/tex]
Given:
gravitational acceleration of Planet A = g₁ = g
gravitational acceleration of Planet B = g₂ = g
radius of Planet A = R₁ = R
radius of Planet B = R₂ = 2R
mass of Planet A = M₁ = m
Asked:
mass of Planet B = M₂ = ?
Solution:
We will compare the gravitational acceleration of the two planets as follows:
[tex]g_1 : g_2 = G\frac{M_1}{(R_1)^2} : G\frac{M_2}{(R_2)^2}[/tex]
[tex]g_1 : g_2 = \frac{M_1}{(R_1)^2} : \frac{M_2}{(R_2)^2}[/tex]
[tex]g : g = \frac{m}{(R)^2} : \frac{M_2}{(2R)^2}[/tex]
[tex]1 : 1 = m : \frac{1}{4}M_2[/tex]
[tex]\frac{1}{4}M_2 = m[/tex]
[tex]\boxed{M_2 = 4m}[/tex]
[tex]\texttt{ }[/tex]
Learn moreImpacts of Gravity : https://brainly.com/question/5330244Effect of Earth’s Gravity on Objects : https://brainly.com/question/8844454The Acceleration Due To Gravity : https://brainly.com/question/4189441[tex]\texttt{ }[/tex]
Answer detailsGrade: High School
Subject: Physics
Chapter: Gravitational Fields
which amount of power is the smallest
How do I find magnitude of acceleration?
Final answer:
To find the magnitude of acceleration, use kinematic equations or Newton's second law if the force and mass are known, or use the Pythagorean theorem for resultant acceleration in two dimensions.
Explanation:
To find the magnitude of acceleration, one needs to use kinematic equations that relate acceleration with other motion variables (such as velocity, time, and displacement) or use Newton's second law if the forces acting on the object are known.
For example, consider Newton's second law which states that the force applied on an object is equal to the mass of the object times its acceleration (F = ma). If you know the mass (m) and the net external force (F), you can solve for the acceleration (a) by rearranging the equation to a = F/m.
In the case where motion is in two dimensions, the acceleration components along the x- and y-axes can be represented as ax and ay. If we are dealing with gravitational acceleration, on Earth it is typically approximated as 9.8 m/s² directed downwards. To find the magnitude of a resultant acceleration vector, you can use the Pythagorean theorem if you have its components: a = √(ax² + ay²).
Elena: Y ____________________ es Patricia López, mi mejor amiga.
Answer:
Ella es.
Explanation:
In spanish you have to conjugate every verb for each different person that you are talking about, in this example you are using the third person, in singular, since you are refering to Patricia Lopez, and you have to refer to her as She or "Ella" so you would have to say "Ella es Patricia López, mi mejor amiga"
What are the SI base units for length and mass?
kilometer and gram
meter and gram
meter and kilogram
kilometer and kilogram
Answer:
meter and kilogram
Explanation:
As we know that there are seven fundamental SI units which are used to fine derived units
these are as following
1). Mass - Kilogram
2). Length - meter
3). Time - Seconds
4). Electric Current - Ampere
5). Amount of substance - Moles
6). Intensity of light - Candela
7). Temperature - Kelvin
You are walking along a small country road one foggy morning and come to an intersection. while you are crossing, you hear an ambulance siren. as a paramedic, you know that the siren sounds at a frequency of 5.87 khz. but, as an amateur musician with perfect pitch, you can tell that the frequency you are hearing is actually 5.29 khz. is the ambulance moving toward or away from you?
Whenever a body is in motion, there is always____ to opposite the motion
German scientist alfred wegener is best known for what hypothesis
Answer:
Continental Drift Hypothesis.Explanation:
Alfred Lothar Wegener (1880-1930) was a German meteorologist and geophysicist who completed the first hypothesis about Continental Drift. He explained that the continents had onced formed a single mass, a single "continent" and then all began to break apart, until reach their presents positions.
So, according to Wegener's hypothesis, all the land on Earth was part of a single and unique mass, which was separated with the years.
Therefore, Alfred Wegener was best known for the Continental Drift Hypothesis.
what is the acceleration of a 5 kg mass pushed by a 10 n force?
a baseball rolls off a 0.70 m high desk and strikes the floor 0.25m away from the base of the desk. how fast was the ball rolling?
please help... I don't understand this :(
By breaking the problem into vertical and horizontal components, we determined the time the ball was in the air and used it to calculate the horizontal velocity. The ball was rolling off the desk at approximately 0.66 m/s. This involves understanding projectile motion in physics.
To determine how fast the baseball was rolling off the desk, we need to use principles of projectile motion. We can break the motion into horizontal (x-direction) and vertical (y-direction) components.
Vertical (y-direction) Analysis:
Initial vertical velocity (u_y) is 0 m/s because the ball is rolling horizontally off the desk.Height of the desk (h) = 0.70 m.Acceleration due to gravity (g) = 9.8 m/s².We can use the kinematic equation: h = (1/2) * g * t² to find the time (t) it takes for the ball to hit the ground.Solving for t: 0.70 = 0.5 * 9.8 * t² → t² = (0.70 * 2) / 9.8 → t² ≈ 0.143 → t ≈ 0.38 s.Horizontal (x-direction) Analysis:
The horizontal distance (d) the ball travels is 0.25 m.The time in the air is the same as calculated in the vertical direction, t ≈ 0.38 s.The horizontal velocity (v_x) can be found using the equation: d = v_x * t.Solving for v_x: 0.25 = v_x * 0.38 → v_x ≈ 0.25 / 0.38 → v_x ≈ 0.66 m/s.Therefore, the ball was rolling off the desk at approximately 0.66 m/s.
Calculate the amount of energy released per gram of peanut burned
The approximate amount of energy released per gram of peanut burned is around 106,712 J/g.
Given that the volume of water is 200.0 mL and the density of water is approximately 1 g/mL, we have:
Mass of water = 200.0 g
The heat transfer equation:
Mass of water = Volume of water × Density of water
Change in temperature = Final temperature - Initial temperature
Change in temperature = 14.2 °C
The energy released = Heat capacity of water × Mass of water × Change in temperature / Mass of peanut burned
The mass of the peanut burned is the difference between its initial and final masses:
Mass of peanut burned = Initial mass - Final mass
Mass of peanut burned = 0.609 - 0.053
Mass of peanut burned = 0.556 g
Energy released = 4.184× 200.0 × 14.2 / 0.556
Energy released = 106,712 J/g
Rounded to a more practical number, the approximate amount of energy released per gram of peanut burned is around 106,712 J/g.
To know more about the energy released:
https://brainly.com/question/1831490
#SPJ5
The complete question is:
A student followed the procedure of this experiment to determine the Caloric content of a Planter's cocktail peanut. The peanut studied had a mass of 0.609 g before combustion and 0.053 g after combustion. The energy released during combustion caused a 14.2 degrees C increase in the temperature of 200.0 mL of water in the calorimeter.
Calculate the amount of energy released per gram of peanut burned.
What information and measurements would you need to calculate the rate of movement?
Final answer:
To calculate the rate of movement, you need displacement and time to determine velocity and average velocity. Acceleration requires additional time and displacement data, used with kinematic equations. In analyzing motion, combining displacements and velocities in two dimensions is essential to determine overall movement parameters.
Explanation:
To calculate the rate of movement, you would need information on both displacement and time. These two measurements allow you to determine velocity, average velocity, and acceleration. Velocity is the rate of change of displacement with time, and it can be calculated if you know the displacement of an object and the time it took to cover that displacement. To find average velocity, you divide the total displacement by the total time.
In cases involving acceleration, you would need additional displacement and time data to calculate how quickly the velocity is changing. Kinematic equations are particularly useful for this purpose. One of the basic kinematic equations, v = u + at (where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time), can be used to find the final velocity of an object.
To determine negative acceleration, also known as deceleration, you would again use kinematic equations. The kinematic equation v^2 = u^2 + 2as (where s is the displacement) can be rearranged to solve for acceleration.
In Physics, especially in Advanced Placement (AP) courses, describing motion in two dimensions often requires combining displacements and velocities in various directions. This is done to calculate the overall displacement and average velocity. Measurements like the total time in the air, the maximum height reached, and the horizontal distance covered are critical when analyzing projectile motions or any two-dimensional movements.
Finally, to measure momentum, one would have to measure mass and velocity. The momentum of a body is given by the product of its mass and velocity. Depending on the experiment, you might measure the force over the duration of a collision using sensors or high-speed cameras to determine the initial and final velocities of the objects involved.
If a car moves with an average speed of 60 km/hr for an hour, it will travel a distance of 60 km. How far will it travel if it continues this average rate for 4 hrs?
Answer: The distance traveled is 240km
Explanation: We know that the average speed is 60km/h, this means that the car travels 60km in an hour, so in 4 hours, the car travels four times this distance:
d = 4*60km = 240km
So the distance traveled is 240km.
What is the basic atomic difference between isotopes of the same element?
A rock held by a person above the floor, but not dropped, is an example of which of newton's laws?
Displacement vs distance
Distance is the length of the path traveled, while displacement is the straight-line distance between the initial and final position, considering both magnitude and direction.
Explanation:Distance is the length of the path traveled by an object, while displacement is the straight-line distance from the initial to the final position, regardless of the path taken. Displacement includes both magnitude and direction, whereas distance only considers magnitude.
For example, if a person walks 5 meters to the east and then 3 meters to the west, their displacement would be 2 meters to the east, as it considers the overall change in position. However, the total distance traveled would be 8 meters, as it accounts for the entire path traveled.
It is important to note that displacement is a vector quantity, meaning it has both magnitude and direction, while distance is a scalar quantity with only magnitude.
A 48 kg girl is standing on a chair. What is the force exerted by the chair?
A bicyclist in the Tour de France crests a mountain pass as he moves at 18 km/h. At the bottom, 4.0 km farther, his speed is at 75 km/h. What is the average acceleration (in m/s^2) while riding down the mountain?
We are given:
v0 = initial velocity = 18 km/h
d = distance = 4 km
v = final velocity = 75 km/h
a =?
We can solve this problem by using the formula:
v^2 = v0^2 + 2 a d
75^2 = 18^2 + 2 (a) * 4
5625 = 324 + 8a
a = 662.625 km/h^2
Is the center of each galaxy a black hole containing new galaxy?
Answer:
Black holes are a class of astronomical objects that have undergone gravitational collapse, leaving behind spheroidal regions of space from which nothing can escape, not even light. Observational evidence indicates that almost every large galaxy has a supermassive black hole at its center.
Explanation:
Have a good day
What kind of change does shot peening cause in a sheet of metal?
It will change shape because the comprehensive stress layer causing it to bend slightly. Thus, thinner material like sheet metal will apparently change its shape. This is usually the reason why someone/people would peen sheet metal. In addition, Shot peening is cold working process done to metal parts for fatigue resistance. And the process is done by placing the part surface into compression.
The scientific measure of disorder is called _____. thermodynamics matter entropy conservation
Answer:
Entropy
Explanation:
100%
A------turns about a fixed point called a fulcrum.
Answer:
lever
Explanation:
The total amount of energy and mass in the universe is _____. always changing slowly increasing constant slowly decreasing
Answer:
constant
Explanation:
The universe is an isolated system. In thermodynamics, an isolated system is a system that does not exchange neither matter (mass) nor energy with the external surroundings.
As a consequence, the energy and mass of an isolated system is always constant (because it cannot be exchanged with the outside): this is known as law of conservation of energy, and it can be applied to the universe as well, since it is an isolated system.
So, the correct answer is
The total amount of energy and mass in the universe is constant
According to newton, the gravity of the ________ is needed to explain planetary orbits.
How long will it take a shell fired from a cliff at an initial velocity of 800 m/s at an angle 30 degrees below the horizontal to reach the ground 150m below?
The shell will take about 0.34 seconds to reach the ground.
Step 1T is given as 800 m/s. The factors that would impact time are gravity and angle.
The factor of gravity (g) is a constant given as = 9.81. Any object on earth will accelerate at the speed of 9.81 meters per second if they are in a free fall.
Hence, T = 800Sin(30°) / g = 800 * 0.5
This is equals 400/9.81 = 40.773 or 40.78 seconds.
Step 2Given that the vertical velocity of the shell is zero because it is accelerating at an angle towards the earth, it will rise at an average speed that can be computed as:
1/2 (800sin30°) = 1/2 * 400 = 200m/s for Tsec and arise of H which is 8,156m.
Step 3The shell having risen falls from rest at the height given above.
S therefore, = 150 +H, that is 150 + 8,156m. This is equals to 8,306m.
Step 4Next, we compute for the Kinematics equation of distance in relation to time (t) where the initial speed is 0.
S = 1/2(gt)²
thus 8,306 = 0.5 * 9.81*t² with elementary cross multiplication and the and the squaring of both sides, we have
t = [tex]\sqrt{1693}[/tex]
t= 41.14608 which is approximately 41.12 seconds.
Because the time taken for the shell to rise and then to fall to the ground is the sum of T and t. the time taken to fall or the time taken for the shell to travel towards to the ground is:
t - T = 41.12 - 40.78
= 0.34 seconds
See the link below for more about Velocity:
https://brainly.com/question/6504879
Temperature is a measure of how much the atoms in a substance are moving. Why is a substance hotter in the gas state than in the liquid state?
A substance is hotter in its gas state because the particles have more freedom to move, resulting in higher average kinetic energy and temperature. The transition from liquid to gas involves the absorption of heat, which is converted into kinetic energy of the gas particles.
Temperature is a measure of the average kinetic energy of the particles within a substance, which reflects how much the atoms in a substance are moving. Substances in the gas state are hotter than in the liquid state because the particles in a gas are moving freely at high speeds, colliding with each other and their surroundings. This high-speed, random motion contributes to a higher average kinetic energy and therefore a higher temperature. In contrast, particles in a liquid are closer together and while they can move past each other, they are not as free to move as in a gas.
The transition from liquid to gas requires energy, typically in the form of heat, which further increases the motion of the particles. When a liquid vaporizes to become a gas, it absorbs heat, which then gets converted into the kinetic energy of the gas particles, leading to higher temperatures. This also explains why many chemical reactions proceed faster at higher temperatures, as the increased motion of particles leads to more frequent and energetic collisions, which are necessary for reactions to occur.