Answer:
408.25 Hz.
Explanation:
The fundamental frequency of a stretched string is given as
f' = 1/2L√(T/m') .................... Equation 1
Note: The a steel piano wire is a string
Where f' = fundamental frequency of the wire, L = length of the wire, T = tension on the wire, m' = mass per unit length of the wire.
Given: L = 0.4 m, T = 800 N,
Also,
m' = m/L where m = mass of the steel wire = 3.00 g = 3/1000 = 0.003 kg.
L = 0.4 m
m' = 0.003/0.4 = 0.0075 kg/m.
Substituting into equation 1
f' = 1/(2×0.4)[√(800/0.0075)]
f' = 1/0.8[√(106666.67)]
f' = 326.599/0.8
f' = 408.25 Hz.
Hence the frequency of the fundamental mode of vibration = 408.25 Hz.
To find the frequency of the fundamental mode of vibration, use the equation f₁ = vₓ / 2L, where vₓ is the speed of waves in the string and L is the length of the string. The speed of waves can be calculated using vₓ = √(T/μ), where T is the tension in the string and μ is the linear mass density of the string. Plugging in the given values, the frequency of the fundamental mode is 1886.75 Hz.
Explanation:In order to find the frequency of the fundamental mode of vibration of the steel piano wire, we need to use the equation:
f1 = vw/2L
Where f1 is the frequency of the fundamental mode, vw is the speed of waves in the string, and L is the length of the string. The speed of waves in the string can be calculated using the equation:
vw = √(T/μ)
Where T is the tension in the string and μ is the linear mass density of the string.
Plugging in the given values, we have:
T = 800 N, L = 0.400 m, and μ = 3.00 g = 0.00300 kg
Converting the linear mass density to kg/m, we have:
μ = 0.00300 kg / 0.400 m = 0.00750 kg/m
Plugging these values into the equation for the speed of waves, we have:
vw = √(800 N / 0.00750 kg/m) = √106666.67 m/s
Finally, plugging the speed of waves and the length of the string into the equation for the frequency of the fundamental mode, we have:
f1 = (√106666.67 m/s) / (2 * 0.400 m)
Calculating this, we get:
f1 = 1886.75 Hz
Learn more about fundamental frequency here:https://brainly.com/question/31314205
#SPJ3
Explain the mathematical equation for KVL (The voltage of a circuit through each component in that circuit is proportional to the resistance).
Explanation:
Kirchhoffs Voltage Rule, or KVL, explains that "the overall voltage throughout the circuit in any closed loop network is equal to the sum of all voltage decreases inside the same loop" which is equivalent to zero. In other words, the mathematical sum of all within the loop voltages must be equal to zero.
Why is it inaccurate to use mgy to calculate the potential energy of a satellite orbiting earth at a height one earth radius above the earth's surface
The formula U = mgy is not accurate for calculating the gravitational potential energy of a satellite orbiting at a significant height because g is not constant at such distances. Instead, the formula U = -GMm/r should be used. This reflects the gravitational potential becoming more negative at larger distances, which means orbits at those distances are bound due to the total energy remaining negative.
Explanation:It's inaccurate to use the simple formula U = mgy to calculate the gravitational potential energy of a satellite orbiting Earth at a significant height because this formula assumes that the gravitational acceleration (g) is constant. However, g varies with altitude and is less at higher altitudes. For satellites in orbit, especially at a height of one Earth radius above the surface, we need to use a more general expression that accounts for the change in g with distance from the center of Earth.
The correct formula for calculating the gravitational potential energy (GPE) of a satellite at a distance r from the center of Earth (where r is significantly greater than the Earth's radius) is derived from the law of universal gravitation and is U = -GMm/r, where G is the gravitational constant, M is the mass of Earth, and m is the mass of the satellite.
This more general expression shows that at large distances, GPE becomes increasingly negative, approaching zero as r becomes infinitely large. A satellite with negative total energy is in a bound orbit because the kinetic energy (which is always positive) is not enough to overcome the magnitude of the negative GPE, hence the satellite remains gravitationally bound to Earth. As for the trend in the ratio of kinetic energy to the change in potential energy as the size of the orbit increases, it generally decreases, indicating that for larger orbits, the kinetic energy constitutes a larger fraction of the total energy needed to maintain the orbit.
The assumption made in this derivation is that the satellite orbits around the center of the astronomical body (such as Earth), and not around a common center of mass, which is not exact but works well since Earth is much more massive compared to the satellite, as in the case of the Moon orbiting the Earth.
When opening a door, you push on it perpendicularly with a force of 46.0 N at a distance of 0.740 m from the hinges. 1. What torque (in N·m) are you exerting relative to the hinges?2. Does it matter if you push at the same height as the hinges? There is only one pair of hinges.
Answer:
given,
Force acting perpendicularly to the door = 46 N
distance from the hinge = 0.740 m
we know,
torque = Force x distance
τ = F x r
τ = 46 x 0.740
τ = 34.04 N.m
b) No it does not matter if we push at the same height as the hinges.
now, From the expression we can clearly see that what matters is the perpendicular distance from the point of force application.
You are given two infinite, parallel wires each carrying current I. The wires are separated by a distance d, and the current in the two wires is flowing in the same direction. This problem concerns the force per unit length between the wires.
What is the force per unit length F/L between the two wires?
Express your answer in terms of I, d, and constants such as μ0 and π.
Answer:
[tex]\dfrac{F}{L}=\dfrac{\mu_oI^2}{2\pi d}[/tex]
Explanation:
If the current flowing in two wires is I and they are separated by a distance of d. We know that the magnetic field due to a wire is given by :
[tex]B=\dfrac{\mu_oI}{2\pi d}[/tex]
Where
d is the separation between wires
The magnetic force between the wires is given by :
[tex]F=BIL[/tex]
I is the current in wire
L is the length of the wires
[tex]F=\dfrac{\mu_oI^2L}{2\pi d}[/tex]
The magnetic force per unit length is given by :
[tex]\dfrac{F}{L}=\dfrac{\mu_oI^2}{2\pi d}[/tex]
So, the force per unit length F/L between the two wires is [tex]\dfrac{\mu_oI^2}{2\pi d}[/tex]. Hence, this is the required solution.
A child bounces in a harness suspended from a door frame by three parallel elastic bands. (a) If each elastic band stretches 0.210 m while supporting a 6.80 kg child, what is the force constant for each elastic band?
Answer:
spring constant of the spring will be equal to 317.33 N/m
Explanation:
We have given mass of the child m = 6.80 kg
Spring is stretched by length of 0.210 m . so x = 0.210 m
Acceleration due to gravity [tex]g=9.8m/sec^2[/tex]
Force on the child will be equal to [tex]W=mg[/tex]
This force will be balanced by spring force
And spring force is equal to F = Kx
So kx = mg
[tex]k\times 0.210=6.80\times 9.8[/tex]
k = 317.33 N /m
So spring constant of the spring will be equal to 317.33 N/m
Krystal is exploring the properties of iron. She takes a large iron nail and finds that the nail does not attract other metal objects. Next, she uses a battery and copper wire to transform the nail into an electromagnet. When she connects the circuit, the nail becomes magnetic and can pick up small metal objects like paper clips. This is shown in the illustration below.
What best describes what has happened to the iron in the nail that causes it to become magnetic?
Explanation:
Iron has tiny magnetic domains inside it. Each domain acts like a tiny magnet with its own magnetic field. These domains are randomly distributed thus resulting in zero magnetic field and iron doesn't behave like a magnet.
When a copper wire is wound around the nail and current is passed through the coil, magnetic field is generated. This magnetic field penetrates through the nail. Due to this the magnetic domains of the nail align in the same direction thus having a net magnetic field. The nail behaves like a magnet till the time current flows through the coil.
If we want to find the height of an object like a flagpole, we can use triangles. In the graphic above, triangle ABE is similar to triangle ACD. In the graphic line segment DC is the height of the . Using the length of BE (your height), AB (your shadow), and AC (the shadow of flagpole), we can use a proportion to determine the height of the .
Answer:
[tex]\displaystyle CD=BE\ \frac{CA}{BA}[/tex]
Explanation:
Thales Theorem
It applies when a line is drawn parallel to one side of a triangle and it intersects the other two sides. The theorem states that line divides the two sides in the same ratio or proportion.
We have drawn the triangle that describes the situation stated in the question, where we want to know the value of CD, knowing the values of BE, BA, and CA. The red line BE is parallel to the line CD, so the Tales theorem must stand meaning that the sides AC and AB are proportionally divided at the same ratio as CD and BA, thus
[tex]\displaystyle \frac{CD}{BE}=\frac{CA}{BA}[/tex]
We can solve for CD (the height of the flagpole)
[tex]\boxed{\displaystyle CD=BE\ \frac{CA}{BA}}[/tex]
Answer:If we want to find the height of an object like a flagpole, we can use right triangles. In the graphic above, triangle ABE is similar to triangle ACD. In the graphic line segment DC is the height of the flagpole. Using the length of BE (your height), AB (your shadow), and AC (the shadow of flagpole), we can use a proportion to determine the height of the flagpole.
Explanation: fill in the blank
A mass ofm= 0.7 kg hung vertically fromthis spring stretches the spring 0.1 m.The acceleration of gravity is 9.8 m/s2.Calculate the value of the force constantkfor the spring?
Answer:
Spring constant of the spring will be 68.6 N/m
Explanation:
It is given mass which is vertically hung m = 6.80 kg
Spring is stretched by length of 0.1 m , so x = 0.210 m
Acceleration due to gravity will be equal to [tex]g=9.8m/sec^2[/tex]
Force on the mass which is vertically hung will be equal to mg
This force will be balanced by spring force acting on the mass
And spring force is equal to F = Kx
So kx = mg
[tex]k\times 0.1=0.7\times 9.8[/tex]
k = 68.6 N /m
So spring constant of the spring will be equal to 68.6 N/m
A cue ball, moving with 9.0 N·s of momentum strikes the nine-ball at rest. The nine-ball moves off with 2.0 N·s in the original direction of the cue ball and 2.0 N·s perpendicular to that direction. What is the momentum of the cue ball after the collision?
Answer:
P = 7.28 N.s
Explanation:
given,
initial momentum of cue ball in x- direction,P₁ = 9 N.s
momentum of nine ball in x- direction, P₂ = 2 N.s
momentum in perpendicular direction i.e. y - direction,P'₂ = 2 N.s
momentum of the cue after collision = ?
using conservation of momentum
in x- direction
P₁ + p = x + P₂
p is the initial momentum of the nine balls which is equal to zero.
9 + 0 = x + 2
x = 7 N.s
momentum in x-direction.
equating along y-direction
P'₁ + p = y + P'₂
0 + 0 = y + 2
y = -2 N.s
the momentum of the cue ball after collision is equal to resultant of the momentum .
[tex]P = \sqrt{x^2+y^2}[/tex]
[tex]P = \sqrt{7^2+(-2)^2}[/tex]
P = 7.28 N.s
the momentum of the cue ball after collision is equal to P = 7.28 N.s
The momentum of the cue ball after the collision is calculated to be 6.2 N·s in based on the conservation of momentum.
Explanation:This physics problem involves the principle of conservation of momentum. Initially, the cue ball has a momentum of 9.0 N·s. After the collision, the nine-ball has a momentum of 2.0 N·s in the original direction and another 2.0 N·s in a perpendicular direction. To find the momentum of the cue ball after the collision, we need to take into account that the total momentum of the system is conserved before and after the collision.
In this case, the total initial momentum is the momentum of the cue ball, which is 9.0 N·s. After the collision, the total momentum should still be 9.0 N·s. The sum of the momenta of the nine-ball (which is the square root of the sum of the squares of the two momentum components, due to the Pythagorean theorem) is 2.8 N·s. Therefore, the momentum of the cue ball after the collision will be the total initial momentum minus the momentum of the nine-ball after the collision, which gives us 9.0 N·s - 2.8 N·s = 6.2 N·s.
To solve this problem, we can use the principle of conservation of momentum. Before the collision, we have the momentum of the cue ball which is 9.0 N·s. After the collision, we have the momentum of the nine-ball which is 2.0 N·s in the original direction of the cue ball and 2.0 N·s perpendicular to that direction. Since momentum is conserved, the total momentum before the collision is equal to the total momentum after the collision. Therefore, the momentum of the cue ball after the collision is the difference between the total momentum before the collision and the momentum of the nine-ball after the collision.
To calculate the momentum of the cue ball after the collision, we subtract the momenta of the nine-ball from the initial momentum of the cue ball. The momentum of the cue ball after the collision is therefore 9.0 N·s - (2.0 N·s + 2.0 N·s) = 5.0 N·s in the original direction of the cue ball.
Learn more about Conservation of Momentum here:https://brainly.com/question/33316833
#SPJ11
Old Faithful geyser in Yellowstone National Park shoots water every hour to a height of 40.0 m. With what velocity does the water leave the ground? (Disregard air resistance. g 9.81 m/s) a. 7.00 m/s c. 28.0 m/s d. 14.0 m/s b. 19.8 m/s 30.) A moderate force will break an egg. However, an egg dropped on the road usually breaks, while one dropped on the grass usually does not break because for the egg dropped on the grass, a. the b. the change in momentum is greater. time interval for stopping is greater. the change in momentum is less the time interval for stopping is less. . c. d.
Answer:
a) [tex]v \approx 28.010\,\frac{m}{s}[/tex], b) B. Time interval for stopping is greater.
Explanation:
a) The initial velocity is found with the help of the Principle of Energy Conservation:
[tex]K = U_{g}[/tex]
[tex]m\cdot g \cdot h = \frac{1}{2}\cdot m \cdot v^{2}[/tex]
[tex]v = \sqrt{2\cdot g \cdot h}[/tex]
[tex]v = \sqrt{2\cdot (9.807\,\frac{m}{s^{2}} )\cdot (40\,m)}[/tex]
[tex]v \approx 28.010\,\frac{m}{s}[/tex]
b) According to the Impact Theorem, the egg does not break on the grass since contact force is significantly lower and time interval is greater. Hence, the right answer is option B.
1) The water leaves the ground at a velocity of 28 m/sec. Therefore the correct option is B).
2) An egg dropped on the road usually breaks, while one dropped on the grass usually does not break because contact force is significantly lower and time interval is greater.
Given :
Yellowstone National Park shoots water every hour to a height of 40 m.
Solution :
1) From conservation of momentum -
KE = PE
[tex]\rm \dfrac{1}{2}mv^2 = mgh[/tex]
[tex]\rm v = \sqrt{2gh}[/tex] --- (1)
where,
[tex]\rm g = 9.8\;m/sec^2[/tex]
h = 40 m
Now put the values of g and h in equation (1) we get,
[tex]\rm v = \sqrt{2\times 9.8\times 40}[/tex]
v = 28 m/sec
2) According to the impact theorem, the egg does not break on the grass since contact force is significantly lower and time interval is greater. Therefore, the correct option is B).
For more information, refer the link given below
https://brainly.com/question/13949051
Objects 1 has half the mass of object 2 and the objects move toward each other and experience an inelastic collision. If both objects do not move after the collision compare the velocity of both objects before the collision.
Answer:
Explanation:
Given
Object 1 is of mass [tex]\frac{m}{2}[/tex]
Object 2 has mass of [tex]m[/tex]
They undergone inelastic collision and do not move after collision i.e. the collision is perfectly inelastic
Final momentum of both the object is zero
suppose [tex]v_1[/tex] and [tex]v_2[/tex] are the velocities of object 1 and 2 respectively then
[tex]m_1v_1+m_2v_2=0[/tex]
[tex]\frac{v_1}{v_2}=-\frac{m_2}{m_1}[/tex]
[tex]\frac{v_1}{v_2}=-2[/tex]
[tex]v_1=-2v_2[/tex]
i.e. velocity of object 1 is twice the velocity of object 2 but opposite to the direction of object 2
The comparison of the velocity of both objects before the collision is [tex]u_1=-2u_2[/tex]
According to the law of conservation of momentum, the momentum of a body before collision is equal to the momentum after collision. Mathematically;
[tex]m_1v_1 + m_2u_2=m_1v_1+m_2v_2[/tex]
Since both objects do not move after the collision, the equation becomes:
[tex]m_1v_1 + m_2u_2=0[/tex]
Also if Objects 1 has half the mass of object 2, then [tex]m_1=0.5m_2[/tex]
Substitute into the formula above:
[tex]0.5m_2u_1 + m_2u_2=0\\0.5m_2u_1 =-m_2u_2\\0.5u_1=-u_2\\u_1=-2u_2[/tex]
The comparison of the velocity of both objects before the collision is [tex]u_1=-2u_2[/tex]
Learn more here: https://brainly.com/question/24634142
A least squares regression line was created to predict the Exam 3 score of STA 2023 students based on their Exam 1 score. The study found that the value of R-squared was 28.8% and the least squares regression line was yhat=50.57+0.4845x. What is the correlation coefficient, r?
1.0.54
2.-0.54
3.5.37
4.-5.37
5.0.08
6.-0.08
Answer: Option (1) is the correct answer.
Explanation:
Formula to calculate correlation coefficient is as follows.
Correlation coefficient = [tex]\sqrt{R^{2}}[/tex]
As the slope for given equation is positive so, it means that the correlation will also be positive in nature.
Therefore, we will calculate the value of correlation coefficient as follows.
Correlation coefficient = [tex]\sqrt{R^{2}}[/tex]
= [tex]\sqrt{(0.288)^{2}}[/tex]
= 0.54
Thus, we can conclude that the correlation coefficient, r is 0.54.
a square solar collector measures 6.00 m by 6.00 m and another solar collector measures 8.000 m by 8.000 m. using the correct number of significant figures what is the combined area of both collectors?
a) 1.00×10^2
b) 1.0 ×10^2
c)1×10^2
d) 1.000x10^2
e) 1.0000x10^2
Answer: [tex]1.000\times 10^2m^2[/tex]
Explanation:
Significant figures : The figures in a number which express the value -the magnitude of a quantity to a specific degree of accuracy is known as significant digits.
The rule apply for the multiplication and division is :
The least precise number present determines the number of significant figures in the answer.
The rule apply for the addition and subtraction is :
The least precise number present after the decimal point determines the number of significant figures in the answer.
Area of square collector 1 =
Area of square collector 1 =[tex]6.00m\times 6.00m=36.0m^2[/tex]
Area of square collector 2 =[tex]length\times breadth[/tex]
Area of square collector 2 =[tex]8.000m\times 8.000m=64.00m^2[/tex]
Combined area of both collectors = Area of square collector 1 + Area of square collector 2 = [tex]36.0m^2+64.00m^2=100.0m^2=1.0\times 10^2m^2[/tex]
The combined area of both collectors is [tex]1.000\times 10^2m^2[/tex]
The combined area of both solar collectors is 1.0 × 10² m².
Explanation:To find the combined area of both solar collectors, simply add the areas of the two squares. The formula for the area of a square is length multiplied by width. For the first solar collector measuring 6.00 m by 6.00 m, the area is 6.00 m x 6.00 m = 36.00 m². To find the combined area of both solar collectors, simply add the areas of the two squares. The formula for the area of a square is length multiplied by width. For the first solar collector measuring 6.00 m by 6.00 m, the area is 6.00 m x 6.00 m = 36.00 m². For the second solar collector measuring 8.000 m by 8.000 m, the area is 8.000 m x 8.000 m = 64.00 m². Adding the areas, we get 36.00 m² + 64.00 m² = 100.00 m².The correct answer, using the correct number of significant figures, is therefore 1.0 × 10² m². This answer is represented by option b.For the second solar collector measuring 8.000 m by 8.000 m, the area is 8.000 m x 8.000 m = 64.00 m². Adding the areas, we get 36.00 m² + 64.00 m² = 100.00 m².
The correct answer, using the correct number of significant figures, is therefore 1.0 × 10² m². This answer is represented by option b.
Which of the following refers to applications and technologies that are used to gather, provide access to, and analyze data and information to support decision-making efforts?
a) data
b) information
c) information technology
d) business intelligence
Answer:
d) business intelligence
Explanation:
Business intelligence refers to applications and technologies that are used to gather, provide access to, and analyze data and information to support decision-making efforts. Business Intelligence uses technologies for the data analysis of business information to make strategic decision for enterprises. Common functions of business intelligence technologies include reporting, online analytical processing, analytics, data mining, process mining, complex event processing, business performance management, benchmarking, text mining, predictive analytics and prescriptive analytics.
The technologies that support decision-making by collecting and analyzing data are known as business intelligence. Transforming data into information is achieved through asking relevant questions and using information systems. Information technology advancements have greatly improved this process.
Explanation:The application and technologies used to gather, provide access to, and analyze data and information to support decision-making efforts are referred to as business intelligence. The process of transforming data into information involves collecting raw data, which are simply facts, measurements, or characteristics, and then analyzing these data to gain valuable insights or knowledge. Clearly, to obtain information, one must ask the right questions and use information systems to process the raw data. Due to advancements in information technology, such as computerized databases and database management systems, data can be stored, retrieved, manipulated, and analyzed more efficiently than ever, contributing significantly to the Information Age we live in today.
A 92.0-kg skydiver falls straight downward with an open parachute through a vertical height of 325 m. The skydiver's velocity remains constant. What is the work done by the nonconservative force of air resistance, which is the only nonconservative force acting? (Assume that up is the positive direction.) a. +2.93 times 10^5 J b. 0J c. Answer is not obtainable, because insufficient information about the skydiver's speed is given. d. -2.93 times 10^5 J
Answer: Workdone293.02KJ
Explanation: The equation to use to calculate Workdone = Change in KE + Change in PE
Assuming velocity is constant,KE becomes 0
Workdone= Change in PE=mg
W=92×9.8×325=293.02KJ
The oscilloscope can be thought of as a plotting machine. What is plotted on the a axis? What is plotted on the y axis? If you try to look at a 6 volt signal with the "volts/div" dial set on 0.2 you don't see anything. Why not? Should you turn the dial to 2 volts/div or to 0.02 volts/div to find the signal?
Answer: The oscilloscope is not a plotting machine.
Explanation: The Oscilloscope is not a plotting machine is a device which is use to measure the frequency,period, peak to peak Voltage Vpp or any signal. That is alternating.
So, if you're such you wired your circuit whose output signal you want to measure very well and all connections and settings are done accurately, then you can reduce the volt/div below 0.2. You not seeing any signal at 0.2v/div shows that the amplitude of the signal coming into the Oscilloscope is not up to that.
The x-axis on an oscilloscope represents time, while the y-axis represents voltage. To view a 6 volt signal when the 'volts/div' is set at 0.2, you should adjust it to 2 volts/div or higher, as the current setting is too low to display the signal's amplitude correctly.
Explanation:On an oscilloscope, the horizontal axis (or x-axis) typically represents time, allowing you to see how a signal changes over time. The vertical axis (or y-axis) represents voltage, displaying the amplitude of the signal. If you are attempting to view a 6 volt signal with the "volts/div" setting at 0.2 volts per division, the signal will be off-scale, because each division will represent only 0.2 volts, and a 6 volt signal would require 30 divisions to be fully displayed, which is beyond the scope of a standard oscilloscope screen.
To properly view the 6 volt signal, you should turn the dial to 2 volts/div or higher. This adjustment will ensure that the signal occupies fewer divisions on the screen, making it visible. If you set it to 0.02 volts/div, the signal would be even less visible because the signal would then require 300 divisions, which is impractical to display.
In a study, the data you collect is Habits on a Always/Sometimes/Never scale. What is the level of measurement? nominal ordinal interval ratio
Answer:
It's an ORDINAL Level of measurement.
The level of measurement for data collected on a Always/Sometimes/Never scale is ordinal.
Explanation:The level of measurement for data collected on a Always/Sometimes/Never scale is ordinal. In an ordinal scale, data can be categorized and ordered, but the intervals between data points may not necessarily be equal or meaningful. In this case, the habit categories would have a natural order (Always, Sometimes, Never), but the difference between Always and Sometimes may not be the same as the difference between Sometimes and Never.
Learn more about Level of measurement for data here:https://brainly.com/question/32819688
#SPJ3
A pumper is supplying a 400-foot hoseline with 120 gpm flowing. The hoseline is composed of 250 feet of 2½-inch hose reduced to 150 feet of 1½-inch hose. If the fire is located in sub-basement level 3, what is the total pressure loss in the hose assembly?
Answer:
It's answer : 44 atm
Explanation:
A conical paper cup is 10 cm tall with a radius of 10 cm. The bottom of the cup ispunctured so that the water leaks out at a rate of 16p3 cm³/sec. At what rate is the waterlevel changing when the water level is 3 cm?
Answer:
0.59 cm
Explanation:
height of cup (h) = 10 cm
radius of cup (r) = 10 cm
rate of change of water level (V') = 16π/3 [tex]cm^{3} /sec[/tex]
rate of change of height (h) = 3 cm
the ratio of the height to radius (h:r) = 10:10
h/r = 10/10
h/r = 1
r=h
formula for volume of a volume (v) = [tex]\frac{1}{3}[/tex].π[tex]r^{2}[/tex]h
substituting r=h into the formula above we have
v = [tex]\frac{1}{3}[/tex].π[tex]h^{2}[/tex]. h = [tex]\frac{1}{3}[/tex].π[tex]h^{3}[/tex]
differentiating the above we have
v' = 3([tex]\frac{1}{3}[/tex]π[tex]h^{2}[/tex])h' = π[tex]h^{2}[/tex].h'
rearranging the above we have
h' = v' / (π[tex]h^{2}[/tex])
where
v' = rate of change of water levelh' = rate of change of water levelh = water levelh' = ((16 x π) / 3) ÷ ( π x [tex]3^{2}[/tex])
h' = ((16 x 3.142) / 3) ÷ ( 3.142 x [tex]3^{2}[/tex])
h' = 16.76 / 28.28
h' = 0.59 cm
A proton is placed in an electric field of intensity 700 N/C. What are the magnitude and direction of the acceleration of this proton due to this field? (mproton = 1.67 × 10-27 kg, e = 1.60 × 10-19 C)
The acceleration of the proton is 6.7×10¹⁰ m/s² in the direction of the electric field.
Electrostatic force:
The force on a charged particle due to an electric field is given by:
F = qE
where q is the charge = 1.6×10⁻¹⁹C
and E is the electric field = 700N/C
Also, from Newton's laws of motion;
F = ma
where m is mass = 1.67×10⁻²⁷kg and a is acceleration
ma = qE
a = qE/m
[tex]a=\frac{1.6\times10^{-19}\times700}{1.67\times10^{-27}}\;m/s^2\\\\a=6.7\times10^{10}\;m/s^2[/tex]towards the direction of the electric field.
Learn more about electrostatic force:
https://brainly.com/question/9774180?referrer=searchResults
A boy and his dog are out for a morning excursion to the river, whichis located 4.0 km away. The boy walks briskly at 2.0 m/s in a straight line. The dog isunleashed and runs back and forth at 4.5 m/s between the boy and the river, until bothreach the river. What is the distance run by the dog?
Answer:
9 Km
Explanation:
given,
distance of the river = 4 Km = 4000 m
speed of the boy = 2 m/s
speed of the dog back and forth = 4.5 m/s
distance ran by the dog = ?
time taken by the boy to cover the distance
we know,
distance = speed x time
[tex]t = \dfrac{4000}{2}[/tex]
t = 2000 s.
now, distance travel by the dog.
d= 4.5 x 2000
d = 9000 m
d = 9 Km
distance covered by the dog is equal to 9 Km.
A wave on a string is described by
D(x,t)=
(2.00cm)sin[(12.57rad/m)x?(638rad/s)t],
1. where x is in m and t is in s. The linear density of the string is 5.00g/m.
2. What is the string tension?
3. What is the maximum displacement of a point on the string?
4. What is the maximum speed of a point on the string?
Explanation:
A wave on a string is described is given by :
[tex]D(x,t)=2\ cm\ sin[(12.57\ rad/m)-(638\ rad/s)t][/tex]
The linear density of the string is 5 g/m.
Where
x is in meters and t is in seconds
The general equation of a wave is given by :
[tex]y=A\ sin(kx-\omega t)[/tex]
(2) The speed of the wave in terms of tension is given by :
[tex]v=\sqrt{\dfrac{T}{\mu}}[/tex]
Also, [tex]v=\dfrac{\omega}{k}[/tex]
So, [tex]\dfrac{\omega}{k}=\sqrt{\dfrac{T}{\mu}}[/tex]
[tex]T=\dfrac{\mu \omega^2}{k^2}[/tex]
[tex]T=\dfrac{5\times 10^{-3}\times (638)^2}{(12.57)^2}[/tex]
T = 12.88 N
(3) The maximum displacement of a point on the string is equal to the amplitude of the wave. So, the maximum displacement is 2 cm.
(4) The maximum speed of a point on the string is given by :
[tex]v=A\omega[/tex]
[tex]v=0.02\times 638[/tex]
v = 12.76 m/s
Hence, this is the required solution.
When we see Saturn going through a period of apparent retrograde motion, it means (a) Saturn is
temporarily moving backward in its orbit of the Sun. (b) Earth is passing Saturn in its orbit, with both
planets on the same side of the Sun. (c) Saturn and Earth must be on opposite sides of the Sun.
Answer:
b) Earth is passing Saturn in its orbit, with both planets on the same side of the Sun.
Explanation:
Retrograde motion is an optical effect due to the fact that Earth rotates more quickly than the planet that apparently has a retrograde motion in the sky.
For this particular case, Saturn has a slower speed in its orbit around the sun. That means that the Earth will pass it, and that will give the effect that the planet is moving backward. That same scenario can be seen between two cars on a highway, the faster car will see the slower car when it passes going in backward for a short fragment of time.
Remember that all the object in the night sky moves from east to west (since the Earth rotates counterclockwise in its daily movement), in the case of a planet with retrograde motion, it will move from west to east for a couple of months.
Apparent retrograde motion of Saturn occurs when Earth overtakes Saturn in their respective orbits around the Sun, creating the illusion that Saturn is moving backward (westward) against the star's background. This is a result of our perspective from Earth and not an actual reversal of Saturn's orbit.
Explanation:When we observe Saturn going through a period of apparent retrograde motion, it is not because Saturn is actually moving backwards in its orbit. Instead, this phenomenon occurs because Earth is passing Saturn in its orbit, with both planets on the same side of the Sun. As Earth, which moves faster in its orbit due to being closer to the Sun, overtakes Saturn, Saturn appears to move westward against the background stars. This westward motion is temporary and is perceived from Earth due to our vantage point.
As Earth continues in its orbit, reaching a point where the direct line of sight aligns with Saturn once more, Saturn will resume its normal prograde motion (eastward relative to the stars) in the night sky. This retrograde motion is much simpler to understand now with our knowledge of Earth and other planets orbiting the Sun, rather than from the historically held geocentric view which placed Earth at the center of the universe.
How did new technology such as the telescope and new theories such as Pascal's Law laid the foundation of the Scientific Revolution? *
Answer:
"Scientists used them to create new theories"
Explanation:
The Scientific Revolution was a sequence of actions that manifest the development of contemporary science through the early contemporary period, when advances in mathematics, physics, astronomy, biology and chemistry altered the opinions of civilization around nature. The scientific revolution denotes to the quick developments in European scientific, mathematical, and political assumed, grounded on a new philosophy of experimentation and a belief in growth that defined Europe in the 16th and 17th centuries.
Final answer:
The telescope and Pascal's Law played a significant role in laying the foundation of the Scientific Revolution. The telescope allowed for groundbreaking observations of the solar system and the universe, while Pascal's Law led to advancements in fluid mechanics and hydraulic engineering.
Explanation:
The new technology, such as the telescope, and new theories, such as Pascal's Law, played a significant role in laying the foundation of the Scientific Revolution.
Firstly, the invention of the telescope in 1608 allowed astronomers like Galileo Galilei to make groundbreaking observations of the solar system and the universe, leading to the development of new theories and understandings of celestial bodies.
Secondly, Pascal's Law, formulated by Blaise Pascal, established the principle that pressure exerted on a fluid is transmitted uniformly in all directions, which laid the foundation for the field of fluid mechanics and led to advancements in hydraulic engineering and other areas.
When energy from the Sun reaches the air above land, the air warms and rises. Along a coastline, cooler air above the ocean flows towards land to replace this rising air. What types of heat transfer are taking place during this process?
Answer:
convection
Explanation:
Convective heat transfer, often referred to simply as convection, is the transfer of heat from one place to another by the movement of fluids. this time fluid is out atmosphere.
If the pressure acting on a given sample of an ideal gas at constant temperature is tripled, what happens to the volume of the gas?
Answer:
Explanation:
According to Boyle's law for constant temperature of gas Pressure is inversely proportional to the volume of gas.
[tex]PV=nRT[/tex]
[tex]PV=constant[/tex]
[tex]P\propto \frac{1}{V}[/tex]
if Pressure is tripled then
[tex]P\times V_1=3P\times V_2[/tex]
[tex]V_2=\frac{V_1}{3}[/tex]
Volume becomes one-third of original volume
Final answer:
According to Boyle's Law, tripling the pressure on a gas at constant temperature will reduce its volume to one third of the original volume.
Explanation:
The question is based on Boyle's Law which states that for a given mass of an ideal gas at constant temperature, the volume of the gas is inversely proportional to its pressure. Therefore, if the pressure acting on a gas is tripled (pressure is proportional to 3), the volume will be reduced to one third of its original value (volume is proportional to 1/3), assuming that the temperature and the amount of gas remain constant.
Suppose wave pulses in an aquarium are produced by a mechanical motor that moves a bob up and down at the surface. The setup uses a 10-W motor and has a period of 1.9 s between bobs. How much kinetic energy is in each pulse.
Answer:
kinetic energy in each pulse = 9.5J
Explanation:
The concept used here is that of work, energy and power.Power P = Work /TimeWork = energy in this caseE = Power x time = Ptbut Power = 10W and t = 1.9sEnergy E = 10W x 1.9s = 19JConventionally, overall energy = kinetic + potential
Hence kinetic energy in each pulse = half of the total energy = 0.5 x 19
energy = 9.5J
The kinetic energy is in each pulse is 19J.
The Power delivered is defined at the rate of work done, if P be the power, W be the work done and t be the time for which the work is done then:
P = W/t
W = Pt
given that P = 10w and t = 1.9s
W = 10×1.9 J
W = 19J
Now, the work done is equal to the change in Kinetic energy (KE)
ΔKE = W = 19J
Hence, the kinetic energy is 19J.
Learn more:
https://brainly.com/question/4047067
Which of the following could be a long-term health effect of chemical pesticide use?
A. cancer
B. neurological disorders
C. all of these
If you weigh 675 N on the earth, what would be your weight on the surface of a neutron star that has the same mass as our sun and a diameter of 21.0 km?
Answer:
8.29 * 10^{13} N
Explanation:
Weigth is the force of gravity a body of mass experiences due to the gravity of another mass.
Force=mass*acceleration (to calculate the mass of the object);
675=m*9.8; Mass = 68.88 kg
Force= [tex]\frac{GMm}{r^{2} }[/tex]; M is the mass of the bigger object, m is the mass of the smaller object, r is the seperation in between (radius in this case) and G is the Gravitational constant.
Mass of the sun = 1.989 × 10^30 kg
G = 6.67 × 10-11 m3 kg-1 s-2
mass of the object = 68.88 kg;
Applying the formula:
Force=[tex]\frac{(6.67 * 10^{-11} ) * (68.88) * (1.989 * 10^{30} )}{(((21 *10^{3} ))/2)^{2} }[/tex]
Force = 8.29 * 10^{13} N
The weight on the surface of a neutron star that has the same mass as our Sun and a diameter of 21.0 km will be 8.29 × 10¹³ N
Gravitational force:Given that the weight of the person on the earth is 675N.
mg = 675N
where m is the mass of the person.
m = 675/g
m = 675/9.8
m = 68.87 kg
The gravitational force on the surface of a celestial body is given by:
F = GMm/R²
where G is the gravitational constant
M is the mass of the body
m is the mass of the person
and, R is the radius of the body
F = (6.67 × 10⁻¹¹)( 2 × 10³⁰)(68.87) / (21/2 × 10³)²
F = 8.29 × 10¹³ N
Learn more about gravitational force:
https://brainly.com/question/21500344?referrer=searchResults
How does artificial transmutation differ from nuclear decay
Explanation:
In both cases the conversion of one chemical element into another is obtained, modifying the number of protons in the nucleus. The difference is that artificial transmutation needs an outside cause, since an outside particle reacts with the nucleus, while in nuclear decay not cause outside is needed.