An airplane travels 622.4 km from Kansas City to St. Louis. The flight takes 4.7 hours. Calculate the Velocity of the plane

Answer:

[tex]t=16.67s[/tex]

Explanation:

From the question, acceleration from [tex]6m/s^2 \ to \ 0m/s^2[/tex] in 10 seconds.

Acceleration function can be written as:-

[tex]a_t=6-0.6t[/tex]

From the acceleration equation, we can obtain the velocity equation:

[tex]v(t)=\int\limits^t_b {0} \, dv=\int\limits^t_0 {a(t)} \, dt\\v(t)=\int\limits^t_0 {(6-06t)} \, dt=6t-0.3t^2\\*dv=a(t)dt[/tex]

We calculate velocity after 10sec from the above v(t) as [tex]30m/s[/tex].

To obtain distance travelled after 10 seconds:-

[tex]S=\int\limits^{10}_0 {6t-0.3t^2} \, dt=|3t^2-0.1t^3| \ *lims(10,0)\\ S=200m[/tex]

Therefore 200m is for 10seconds, and next 200m at 30m/s

Total time=[tex]10+\frac{200}{30}=16.67s[/tex]

Answer:

30 L

Explanation:

Ideal gas law:

PV = nRT

Rearranging:

PV / T = nR

Since n and R are constant:

P₁ V₁ / T₁ = P₂ V₂ / T₂

Plugging in values and solving:

(200 kPa) (42 L) / (30 + 273.15 K) = (250 kPa) V / (5 + 273.15 K)

V = 30.8 L

Rounded to one significant figure, the new volume is 30 L.

Answer:

31.5N

Explanation:

M = 63kg, v = 7.0m/s t = 14.0s F =?

Force = Mass * acceleration

but acceleration = change in velocity / time

a = dV/dt

F = (63 * 7.0) / 14

F = 31.5N

To calculate the force exerted by the jetpack, we use the astronaut's deceleration and mass. The deceleration is obtained from the change in velocity (from 7.0 m/s to 0 m/s in 14.0 s). Applying Newton's second law, the force equals to the mass (63 kg) multiplied by the deceleration (-0.5 m/s²), resulting in a force of 31.5 newtons in magnitude.

The question is asking to calculate the force exerted by a jetpack that an astronaut uses to come to a stop relative to a spacecraft. First, we'll use the formula for acceleration (a) which is the change in velocity (Δv) divided by the change in time (Δt). In this case, the astronaut decelerates from 7.0 m/s to 0 m/s in 14.0 s, so the acceleration is -7.0 m/s divided by 14.0 s, which equals -0.5 m/s² (the negative sign indicates deceleration).

The next step is to apply Newton's second law of motion: F = ma, where F is the force, m is the mass, and a is the acceleration. Plugging in the values we have: F = 63 kg * (-0.5 m/s²) = -31.5 N. The negative sign indicates that the force is in the opposite direction of the initial velocity, i.e., to the left if the initial movement was to the right.

The magnitude of the force exerted by the jetpack is 31.5 newtons.

Answer:

84.82N/C.

Explanation:

The x-components of the electric field cancel; therefore, we only care about the y-components.

The y-component of the differential electric field at the center is

[tex]$dE = \frac{kdQ }{R^2} sin(\theta )$[/tex].

Now, let us call [tex]\lambda[/tex] the charge per unit length, then we know that

[tex]dQ = \lambda Rd\theta[/tex];

therefore,

[tex]$dE = \frac{k \lambda R d\theta }{R^2} sin(\theta )$[/tex]

[tex]$dE = \frac{k \lambda d\theta }{R} sin(\theta )$[/tex]

Integrating

[tex]$E = \frac{k \lambda }{R}\int_0^\pi sin(\theta )d\theta$[/tex]

[tex]$E = \frac{k \lambda }{R}*[-cos(\pi )+cos(0) ]$[/tex]

[tex]$E = \frac{2k \lambda }{R}.$[/tex]

Now, we know that

[tex]\lambda = 3.0*10^{-9}C/m,[/tex]

[tex]k = 9*10^9kg\cdot m^3\cdot s^{-4}\cdot A^{-2},[/tex]

and the radius of the semicircle is

[tex]\pi R = 2.0m,\\\\R = \dfrac{2.0m}{\pi };[/tex]

therefore,

[tex]$E = \frac{2(9*10^9) (3.0*10^{-9}) }{\dfrac{2.0}{\pi } }.$[/tex]

[tex]$\boxed{E = 84.82N/C.}$[/tex]

Answer:

S=400m

Explanation:

Given t=10.and [tex]a=8m/s^2[/tex],

Initial velocity,[tex]u[/tex], of the car is zero.

To find distance,[tex]s[/tex]

[tex]S=ut+0.5at^2[/tex]

[tex]S=0\times10+0.5\times8\times10^2\\S=400m[/tex]

Therefore, car's position after 10seconds is 400m away from the start.

The given standing wave on a string has a wavelength (λ) of 0.55 m, a frequency (f) of 24.54 Hz, a wave number (k) of 11.46 rad/m, and an angular frequency (ω) of 154.3 rad/s. The displacement of the bead at its position is given by the wave equation, and the maximum transverse speed (vy_max) is estimated to be approximately 0.4 m/s.

Length of the string (L) = 1.65 m

Amplitude of the traveling wave (A) = 3.65 mm

Speed of the traveling wave (vx) = 13.5 m/s

Distance of the first antinode from the left end (x) = 27.5 cm

Distance of the bead from the first antinode (d) = 13.8 cm

2. Finding the wavelength (λ):

Since the antinode is the point of maximum displacement, the first antinode is located at half the wavelength from the fixed end. Therefore,

λ = 2 * x = 2 * 0.275 m = 0.55 m

3. Finding the frequency (f):

We can use the relationship between wave speed, wavelength, and frequency:

v = λf

f = v / λ = 13.5 m/s / 0.55 m = 24.54 Hz

4. Finding the wave equation:

The equation for a standing wave on a string can be written as:

y(x, t) = A sin(kx) cos(ωt)

where:

k = wave number (k = 2π/λ)

ω = angular frequency (ω = 2πf)

5. Finding the wave number (k):

k = 2π/λ = 2π / 0.55 m = 11.46 rad/m

6. Finding the angular frequency (ω):

ω = 2πf = 2π * 24.54 Hz = 154.3 rad/s

7. Finding the displacement of the bead at its position:

The bead is located at x = x1 + d, where x1 is the distance of the first antinode from the left end (0.275 m) and d is the distance of the bead from the first antinode (0.138 m).

x1 + d = 0.275 m + 0.138 m = 0.413 m

Substitute this value of x in the wave equation:

y(0.413 m, t) = 3.65 mm * sin(11.46 rad/m * 0.413 m) * cos(154.3 rad/s * t)

8. Finding the maximum transverse speed (vy):

The maximum transverse speed occurs when the derivative of the displacement with respect to time (dy/dt) is at its maximum.

vy(t) = dy/dt = -Aω * cos(kx) sin(ωt)

The maximum value of sin(ωt) is 1, and the maximum value of cos(kx) depends on the position of the bead. Since the bead is not at a node or antinode, cos(kx) will not be 0 or 1.

Therefore, the maximum transverse speed (vy_max) can be estimated as:

vy_max ≈ Aω ≈ 3.65 mm * 154.3 rad/s ≈ 0.4 m/s

Answer:current is measured in amps

Explanation:

Current measured in amps

Answer:

Current

Explanation:

Obviously

Answer:

the answer is 100% A

Explanation:

Answer:

If two objects with different masses are pushing each other, which exerts the greater force?

The object with the greater mass exerts the greater force on the smaller object because the larger object has more inertia.

Explanation:

Answer:

Earth, our home, is the third planet from the sun. It's described as the only planet known to have an atmosphere containing free oxygen, oceans of water on its surface and, of course, life. Earth is also the fifth largest of the planets in the solar system. Hope this helped.

Explanation:

Answer:

A single component that can’t be separated

brainliest please ;)

A substance is a single component that can't be separated. It can be an element or a compound, like pure water.

A substance in the realm of chemistry is generally referred to as C. a single component that can't be separated. This implies that it consists of one type of particle only, and these particles cannot be separated by simple physical means. A substance can be either an element, which contains a single type of atom, or a compound, which contains molecules formed from different types of atoms chemically bonded together. For example, pure water (H2O) is a substance.

https://brainly.com/question/32839637

#SPJ2

By reducing friction

Explanation:

A big machine is composed of several moving and stationary parts. Some of these parts are in a state of constant motion hence they periodically rub against each other. The friction between the body parts causes the body part to wear out and heat up in the process. This heat is symbolic of waste of energy.

The lubricating agents are a saviour in such conditions. Lubricating oils with high viscosities reduces friction. If we go deep into the working of the lubrication we find that the interacting parts of machines are quite rough when viewed under microscope. These rough surfaces when interact produce bumpy motion, wear and tear, heat etc.

Oil fills these microscopic voids and thus provides temporary relief. When these lubricated body parts interact, they encounter plain surface with decreased friction (due to high viscosity of the oils) and thus glide over each other freely thereby producing smooth movements, noiseless working.

Answer:

Sustainability.

Explanation:

Each organism and living creature has its part to play, and with the diverseness, each one supports the other - the cycle of life and the food chain.

Explanation:

an economic part of  biodiversity could be tourism so people would want to see all the different species so that may be good for hotels flight companies and tour guides it may also be good for zoo companies if they increase the different amount of species it could attract more people brainliest pls

In this scenario of Physics involving free fall and projected motion, all the balls launched, whether from rest or different angles, from the same height will hit the ground simultaneously. The time of flight in such a case, considering no air resistance, will only depend on the initial height from the ground and the acceleration due to gravity, not on the initial speed or direction of projection.

The question pertains to the physics concept of free fall and their time of flights. To reiterate, all the balls are being launched from the same height, h, including ball 5 which is released from rest. According to physics, irrespective of their initial velocities or launch angles, all objects in free fall will hit the ground at the same time assuming they are dropped from the same height. This is because the time a projectile is in the air is governed by its vertical motion alone and in this scenario, all the balls have the same vertical component which is the same height from which they are dropped. So, all of the balls including ball 5 will hit the ground simultaneously.

This understanding is backed by two key principles. One, that the horizontal and vertical motions of a projectile are independent of each other, meaning the horizontal velocity does not affect the vertical fall. Two, that the time of flight of a projectile is linearly proportional to the initial velocity in the y direction (height in this case) and inversely proportional to g (acceleration due to gravity). Considering the fact that all the balls start from rest, have the same height, and experience the same acceleration due to gravity, the time of flight for all balls becomes equal.

https://brainly.com/question/29545516

#SPJ3

Answer:

potential energy

Explanation:

Answer: Elastic Potential Energy

Explanation: For stretched material such as ropes or strings they have a certain form of energy that allows them to stretch or compress. The energy is called elastic energy. For the case of the string on the bow it possess Elastic Potential Energy since there is no motion in the string.

refractive index = sin i / sin e

where i is the angle of incidence

e is the angle of refraction

1.5 = sin 35 / sin e

1.5 = 0.5736/sin e

sin e = 0.5736/ 1.5

sin e = 0.3824

e = 22.48°

Answer:

Explanation:

By increasing the time and the distance over which a car stops during a collision, the change in the velocity (acceleration) is reduced, reducing, in consequence, the impact.

The equation to determine the change in velocity for a uniformly accelerated motion is given by the relation between the speed, the distance, and the acceleration:

The acceleration must be less than or equal to 46.2g, which is 46.2 × 9.8m/s² = 452.76m/s². Thus, the condition is acceleration ≤ 452.76m/s²

Here, using the maximum acceleration:

Thus:

To determine the time use the impulse notion.

Since the final velocity is 0 (the car stops), Δv is the speed of the car: Δv = v.

Substitute:

Answer: Because the speed of sound varies depending on the medium and its temperature.

Explanation:

Sound is a mechanical wave, this means its velocity of propagation depends on the medium.

Now, in general sound waves travel faster in solids than in liquids or gases. In addition, it varies with changes in the temperature of the medium. This is because an increase in temperature means that the frequency of interactions between the particles that transport the vibration increases, hence this increase in activity increases the speed.

So, the speed of sound in a gas (air, for example) is not constant, but depends on the temperature.  

Hence, the higher the air temperature, the greater the velocity of propagation; that is why the speed of sound is faster in a humid and warm sea-level rainforest compared to the top of Mount Everest, which is cold.

Answer:

noun. Physics. radiation in the form of elementary particles emitted by an atomic nucleus, as alpha rays or gamma rays, produced by decay of radioactive substances or by nuclear fission.

Explanation:

Nuclear radiation, or radioactivity, is energy and particles emitted by the nucleus in a nuclear reaction. It includes gamma-rays, alpha-particles, beta-particles, neutrons, and positrons. While useful in many areas, such as cancer detection and city powering, it can also pose health risks.

Nuclear radiation, also known as radioactivity, is the energy and particles emitted by the nucleus during a nuclear reaction. It is a form of ionizing radiation, meaning the energy is sufficient to ionize matter, or change the structure of atoms.

Nuclear radiation includes gamma-rays (y-radiations), alpha-particles (a-particles), beta-particle (B-particles), neutrons (n), and positrons (3+-particles). These types of radiation originate from the radioactive decay of naturally occurring radionuclides.

While nuclear radiation is integral to many aspects of daily life, such as cancer detection, artifact study, city powering, it can also pose health risks. For instance, high doses of nuclear radiation can cause burns and hair loss.

https://brainly.com/question/11878930

#SPJ12

Answer:

71

Explanation:

A 59 kg man has a total mechanical energy of 150,023. J. If he is swinging downward and is currently 2.6 m above the ground, his speed 71 m/sec.

Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.

Using conservation of energy

m*g*h + 0.5 m*v² = 150023 joule

59*9.8*2.6 + 0.5*59*v² = 150023

1503.32 + 29.5 v² = 150023

29.5 v² = 148519.60

v² = 5034.56

v = 70.95 = 71 m/sec

A 59 kg man has a total mechanical energy of 150,023. J. If he is swinging downward and is currently 2.6 m above the ground, his speed 71 m/sec.

To learn more about energy refer to the link:

brainly.com/question/1932868

 #SPJ2

Towards

Explanation:

When light is incident at a transparent surface, the transmitted component of the light changes direction at the interface. Another component of the light is reflected at the surface. When a ray of light passes from water to diamond at an angle 45°, its path is bent towards the normal. This is so because water is less dense than the diamond. The refractive index of water (n = 1.33) is less than the refractive index of diamond (n = 2.419).

Light passing from less dense water to more dense diamond bends towards the normal due to a significant change in refractive indices.

When a light ray passes from less dense water (n = 1.33) into more dense diamond (n = 2.419) at an angle of 45 degrees, its path is bent towards the normal.

To calculate the angle of refraction, we can use Snell's Law: n1sinθ1 = n2sinθ2. Given n1 (water) = 1.33, n2 (diamond) = 2.419, and θ1 = 45°, we can solve for θ2.

The larger change in direction in diamond compared to water is due to the significant difference in refractive indices, leading to a greater impact on the path of the light ray.

Final answer:

To find your father's mass, divide the force (484 N) by the acceleration due to gravity (9.8 m/s^2). The mass is approximately 49.4 kg (to the nearest tenth).

Explanation:

To determine your father's mass, we can use Newton's second law of motion, which states that force equals mass times acceleration (F = ma). In this case, the force is 484 N (Newtons) and the acceleration is the acceleration due to gravity, which is approximately 9.8 m/s^2. Rearranging the formula, we get mass = force / acceleration, which gives us mass = 484 N / 9.8 m/s^2. Calculating this, we find that your father's mass is approximately 49.4 kg (to the nearest tenth).

Answer:

A

Explanation:

it is just right

The differential distribution of ions across the cell membrane is due to the "resting membrane potential".

Option: C

Explanation:

The unequal allocation of charged particles like ions between the internal and external portion of cell, and by the varying membrane permeability to various ion forms, understood as resting membrane potential.

Within a sleeping brain, Na+ and K+ ions exhibit concentration gradients throughout the membrane, which push their gradients down through channels, resulting in a differentiation of the charges that generates the resting potential. With K+ than Na+ ions, the membrane is even more permeable, so the resting potential is similar to potassium ion's equilibrium potential.

The differential distribution of ions across the cell membrane is largely due to the Na+-K+-ATPase pump, a protein that uses ATP to transport sodium and potassium ions against their concentration gradients. Other factors such as the membrane's ion permeability, the resting membrane potential, and ATP levels also contribute.

The differential distribution of ions across the cell membrane is primarily due to the Na+-K+-ATPase pump, also known as the sodium-potassium pump. This protein structure uses energy from ATP to pump three sodium ions out of the cell and two potassium ions into the cell, establishing a concentration gradient. The difference in permeability of the cell membrane to various ions also plays a role in the differential distribution, but the Na+-K+-ATPase pump is the primary mechanism.

The resting membrane potential and cell ATP levels also indirectly influence ion distribution. The resting membrane potential is a result of the charge difference across the cell membrane due to the ion distribution, while a lack of ATP can affect the energy-dependent Na+-K+-ATPase pump's function.

https://brainly.com/question/38842807

#SPJ11

Answer:5.0 v is 0.25a

15v is 0.75a

Explanation:

1: A, 0.25

2: C, 0.75

Answer: L=F/a

Explanation:

Efficiency of inclined plane is L/h VR.

Efficiency of an inclined plane is defied as the ratio of effort in moving a body up or down without friction to that with friction.

Here,

The efficiency of an inclined plane,

η = MA/VR

η = (l/h)/ (dE/dl)

η = L/h (VR)

Hence, derived the efficiency for inclined plane is L/h VR.

To learn more about efficiency of inclined plane, click:

https://brainly.com/question/6242390

#SPJ2

False

Explanation:

The Unit of Frequency is Hertz (Hz)

Frequency in layman’s language can be said as a number of times a particular event repeat itself in unit time.

E.g. Supposing a hypothetical situation in which a boy cracks 5 nuts every minute, then his frequency can be said to be 5 nuts /min

However, in physical dimensions, the frequency is always calculated in terms of a second (as a measure of unit time).

Hence the Standard unit (SI)of Frequency is named after German origin physicist Heinrich Hertz. In simple terms, 1 Hertz denotes the event repeats itself one time per second and in physics domain one cycle per second.

Answer:

Cochlea

Explanation:

Cochlea. The [tex]cochlea[/tex] changes the sound vibrations from the middle ear into nerve signals. The nerve signals the travel to the brain via the [tex]cochlea \ nerve[/tex].

The cochlea nerve is also called the auditory nerve.

Answer:

C = 41.7kW

Explanation:

Data ;

Mass (M) = 1x10³kg

Initial velocity (u) = 0m/s

Final velocity (v) = 25m/s

Time (t) = 7.5s

Power = Work / time

Work = force * distance

acceleration = average velocity/ time

Acceleration = (25 - 0) / 7.5 = 3.3m/s²

Power = force * velocity (speed)

Average velocity = (25 - 0) / 2 = 12.5m/s

Force = mass * acceleration = 1x10³ * 3.3 = 3333.33N

Power = force * velocity

Power = 3333.33 * 12.5 / 41666.67W

Answer:

C. 41.7 kW

Explanation:

car's acceleration is the velocity difference over time: a = (v1 - v0)/t = (25 - 0)/7.5 = 3.3 m/s^2

The avg. power P = F * v

The avg. speed is thus v = (v0 + v1)/2 = (0 + 25)/2 = 12.5 m/s

F = m * a = 1*10^3 * 3.3 = 3,333 N

P = 3,333 * 12.5 = 41,667 W = 41.7 kW