The new energy density of the parallel-plate capacitor remains the same as the original energy density after all geometric parameters are doubled.
The energy density, u, of an ideal air-filled parallel-plate capacitor is given by the formula u = rac{1}{2} rac{Q^2}{C imes volume}. The capacitance C of a parallel-plate capacitor is directly proportional to the area of the plates, A, and inversely proportional to the distance between the plates, d. When the geometric parameters of the capacitor are doubled, the area quadruples (since area is proportional to the square of the diameter), and the separation also doubles. Therefore, the new capacitance is eight times larger. However, since the charge Q remains the same and the volume between the plates has increased by a factor of eight (doubling each linear dimension), the new energy density, u', will be the same as the original energy density, u0.
The original energy density between the plates of an ideal air-filled parallel-plate capacitor can be calculated using the formula U₀ = Q² / (2C). When the geometric parameters are doubled, the new energy density U between the plates can be found by considering the new capacitance, which is inversely proportional to the plate separation.
Two cars pass each other traveling at the same speed. one car has a constant velocity of 15.0 m/s, east. the other car has a constant acceleration of 1.00 m/s , west. how much time will have elapsed until the cars are 164 m apart?
The formula for calculating the distance at constant velocity is:
d = v * t
d = 15 t
The formula for distance at constant acceleration is:
d = v0 t + 0.5 a t^2
d = 15 t + 0.5 t^2
So after a sum distance of 164 m:
15 t + (15 t + 0.5 t^2) = 164
30 t + 0.5 t^2 = 164
t^2 + 60 t = 328
(t + 30)^2 = 328 + 30^2
t + 30 = ± 35.04
t = -65.04, 5.04
Since time cannot be negative, so the two cars are 164 m apart after about 5 seconds
A source emits monochromatic light of wavelength 495 nm in air. when the light passes through a liquid, its wavelength reduces to 434 nm what is the liquid's index of refraction?
a. 1.14
b. 1.49
c. 2.03
d. 1.26
e. 1.33
The liquid's index of refraction is approximately 1.88.
Explanation:To find the index of refraction for the liquid, we can use the formula:
n₁ / n₂ = λ₁ / λ₂
where n₁ and n₂ are the indices of refraction for air and the liquid, respectively, and λ₁ and λ₂ are the wavelengths of light in air and the liquid, respectively.
In this problem, we are given that the wavelength of light in air is 495 nm and the wavelength in the liquid is 434 nm. Plugging in these values, we get:
n₁ / n₂ = 495 nm / 434 nm
n₂ ≈ n₁ * (434 nm / 495 nm)
n₂ ≈ 1 * (434 nm / 495 nm)
n₂ ≈ 0.876
To convert the index of refraction to its decimal form, we add 1, giving us:
n₂ ≈ 0.876 + 1
n₂ ≈ 1.876
The liquid's index of refraction is approximately 1.876, which can be rounded to 1.88.
Use this excerpt from the text to answer the question. "Some people insist the United States is more properly called a republic rather than a democracy." The people who support this statement argue that the United States is a republic because in its government,
In order to climb a steep hill on a bicycle, a rider shifts to the lowest gear. The lowest gear has the greatest mechanical advantage because it
The lowest gear on a bicycle provides the greatest mechanical advantage by amplifying the force exerted on the pedals, requiring the rider to pedal more but with less effort per stroke, due to the conservation of energy.
In order to climb a steep hill on a bicycle, a rider shifts to the lowest gear. The lowest gear has the greatest mechanical advantage because it allows the rider to apply a force over a greater distance. When a gear with many teeth drives a gear with fewer teeth, the driven gear spins more times but with a smaller turning force, amplifying the force the rider exerts on the pedals.
However, this means the rider will have to spin the pedals more times to cover the same distance, which is a trade-off.
This concept of mechanical advantage applies to all machines and is governed by the conservation of energy, which states that work input is equal to work output, minus any losses due to inefficiency like friction.
Newton's first law of motion states that an object remains at rest unless a(n) ____ force acts on it. a. balanced c. gravitational b. frictional d. unbalanced Please select the best answer from the choice
what is beach nourishment
If the coefficient of kinetic friction is 0.500, what was the object's speed as you released it?
A force of 250 N is applied to an object that accelerates at a rate of 10m/sec2. What is the mass of the object?
Is the change in kinetic energy of your ball greater than, less than, or equal to the change in kinetic energy of your friend's ball?
The position of a 2.75×105n training helicopter under test is given by r⃗ =(0.020m/s3)t3i^+(2.2m/s)tj^−(0.060m/s2)t2k^. part a find the net force on the helicopter at t=5.0s.
The net force on the helicopter at t=5.0s = F = 1.65.10⁴i - 3.3.10³k
Further explanationNewton's 2nd law explains that the acceleration produced by the resultant force on an object is proportional and in line with the resultant force and inversely proportional to the mass of the object
[tex]\large{\boxed{\bold{a~=~\frac{F}{m} }}}[/tex]
∑F = m. a
F = force, N
m = mass = kg
a = acceleration due to gravity, m / s²
While the speed is the first derivative of distance
[tex]\large{\boxed{\bold{V~=~\frac{dr}{dt} }}}[/tex]
While acceleration is the first derivative of the velocity function for t
[tex]\large{\boxed{\bold{a~=~\frac{dv}{dt} }}}[/tex]
It is known that the distance function (r) = (0.020 t³i + 2.2 tj-0.06t²k
Then the speed (v)
[tex]v~=~\frac{dr}{dt}[/tex]
v = 0.06t²i + 2.2j - 0.12tk
Then acceleration (a)
[tex]a~=~\frac{dv}{dt}[/tex]
a = 0.12ti - 0.12k
While :
W = m . g
[tex]m~=~\frac{W}{g}[/tex]
m = 2.75.10⁵ : 10
m = 2.75.10⁴
so net force :
F = m . a
F = 2.75.10⁴ . ( 0.12ti - 0.12k)
for t = 5
F = 2.75.10⁴ . ( 0.12.5i - 0.12k)
F = 2.75.10⁴ (0.6i-0.12k)
F = 1.65.10⁴i - 3.3.10³k
Learn moreNewton's second law
https://brainly.com/question/10673278
the acceleration of an object
https://brainly.com/question/12140414
https://brainly.com/question/1998887
a correct statement of Newton's second law
https://brainly.com/question/2247544
Keywords : Newton's Law, acceleration, net force
The net force on the helicopter at time [tex]t = 5.0\,{\text{s}}[/tex] is [tex]\fbox{\begin\\\left( {1.68 \times {{10}^4}\,\hat i - 3.36 \times {{10}^3}\,\hat j} \right)\,{\text{N}}\end{minispace}}[/tex].
Further Explanation:
The helicopter moves under the action of the force which changes the position of the helicopter with respect to time according to the following equation.
[tex]\vec{r}=(0.020\text{ m}/\text{s}^3)\text{ t}^3\hat{i}+(2.2\text{ m}/\text{s})\text{ t}^3\hat{j}-(0.060\text{ m}/\text{s}^2)\text{ t}^2\hat{k}[/tex]
The force acting on the helicopter at a particular time is given by:
[tex]\fbox{\begin\\F= m\cdot{a}\end{minispace}}[/tex]
Here, [tex]m[/tex] is the mass of the helicopter and [tex]a[/tex] is the acceleration of helicopter.
The helicopter has a weight of [tex]2.75 \times {10^5}\,{\text{N}}[/tex]. This weight of the helicopter can be converted into the mass of the helicopter.
The weight of the helicopter can be represented as.
[tex]\fbox{\begin\\W=m \cdot g\end{minispace}}[/tex]
Rearrange and simplify the expression for the mass of helicopter.
[tex]\begin{aligned}m&=\frac{W}{g}\\&=\frac{{2.75\times{{10}^5}}}{{9.8}}\,{\text{kg}}\\&=2.{\text{80}}\times{\text{1}}{{\text{0}}^4}\,{\text{kg}}\\\end{aligned}[/tex]
The velocity of the helicopter can be determined by the differentiation of the position vector of the helicopter with respect to time.
[tex]\begin{aligned}\vec{v}&=\dfrac{{d\vec{r}}}{{dt}}\\&=\dfrac{d}{{dt}}\ [(0.020\text{ m}/\text{s}^3)\text{ t}^3\hat{i}+(2.2\text{ m}/\text{s})\text{ t}^3\hat{j}-(0.060\text{ m}/\text{s}^2)\text{ t}^2\hat{k}]\\&=0.060{t^2}\hat{i}+2.2\hat{j}-0.12t\hat{k}\end{aligned}[/tex]
The acceleration of the helicopter is the derivative of the velocity with respect to the time.
[tex]\begin{aligned}\vec a&=\frac{{d\vec v}}{{dt}}\\&=\frac{d}{{dt}}\left({0.060{t^2}\hat i+2.2\hat j-0.12t\hat k}\right)\\&=0.12t\hat i-0.12\hat k\\\end{aligned}[/tex]
Substitute the value of [tex]t = 5.0\,{\text{s}}[/tex] in equation of the acceleration.
[tex]\begin{aligned}a&=0.12\left({5.0}\right)\hat i-0.12\hat k\\&=0.6\hat i-0.12\hat k\\\end{aligned}[/tex]
Substitute the values of the acceleration and the mass of the helicopter in the equation of force.
[tex]\begin{aligned}F&=\left( {2.80\times{{10}^4}\,{\text{kg}}}\right)\left({0.6\hat i-0.12\hat k}\right) \\&=\left({1.68\times{{10}^4}\,\hat i-3.36\times{{10}^3}\,\hat j}\right)\,{\text{N}}\\\end{aligned}[/tex]
Thus, the net force acting on the helicopter at time [tex]t = 5\,{\text{s}}[/tex] is [tex]\fbox{\begin\\\left( {1.68 \times {{10}^4}\,\hat i - 3.36 \times {{10}^3}\,\hat j} \right)\,{\text{N}}\end{minispace}}[/tex].
Learn More:
1. The motion of a body under friction https://brainly.com/question/7031524
2. Conservation of energy https://brainly.com/question/3943029
3. Motion in two dimensions https://brainly.com/question/11023695
Answer Details:
Grade: College
Subject: Physics
Chapter: Force and acceleration
Keywords:
Helicopter, force, time, 5s, position, velocity, derivative, acceleration, weight, net force, t=5s, 0.020t3 m/s3, 2.75x10^5 N, helicopter under test, gravity, mass of helicopter.
A person's height and weight will change gradually, while other things, such as getting a driver's license, may occur suddenly and mark the beginning of a new phase in life. This difference is an example of the theme of development known as:
Answer:
Continuity vs. Stages
Explanation:
Continuity is the gradual changes that a person may experiment throught their life, good examples are the ones given in the question, height and weght increasing or changing over time, but stages start whenever something happens that changes the way of life of the person, for example graduating college and going into the labor force, or getting married.
Rosa uses the formula (vi cos)t to do a calculation. Which value is Rosa most likely trying to find? the vertical acceleration of a projectile launched at an angle the vertical acceleration of a projectile launched horizontally the horizontal displacement of a projectile launched at an angle the horizontal displacement of a projectile launched horizontally
If Rosa uses the formula (vi cos)t to do a calculation, then Rosa most likely trying to find the horizontal displacement of a projectile launched at an angle to the horizontal, therefore the correct answer is option C.
What is a projectile motion?It can be defined as the motion of any object or body when thrown from the earth's surface and follows any curved path under the effect of the gravitational force of the earth.
The horizontal component of the velocity during any projectile motion is constant and is given by vicosθ.
Thus, If Rosa uses the formula (vi cos)t to do a calculation, then Rosa most likely trying to find the horizontal displacement of a projectile launched at an angle to the horizontal, therefore the correct answer is option C.
Learn more about projectile motion here, refer to the link given below ;
brainly.com/question/11049671
#SPJ5
15. To use your left hand to determine the direction of the voltage developed in a moving conductor in a stationary magnetic field, you must point your A. forefinger in the direction of the motion. B. forefinger in the direction of the lines of force. C. thumb in the direction of the electromagnetic force. D. thumb in the direction of the magnetic flux.
Correct answer choice is:
B. forefinger in the direction of the lines of force.
Explanation:
The direction of the force - and consequently the transfer of the wire - can be defined by applying Fleming’s left-hand rule.
The forefinger tends to the direction of the magnetic field. The middle finger points in the course of the current. The thumb supplies the direction of force or movement working on the conductor. Fleming's Left Hand Rule is applied in electronic engines which are utilized in coolers, appliances, printers, etc.
Nylon is a “big” covalent molecule used to make backpacks. Which property of covalent compounds is most useful in making backpacks?
Explain how new discoveries influence contemporary psychological perspectives
Answer:
New discoveries can either provide evidence to support or refute contemporary psychological perspectives, or they can lead to the development of new theories and perspectives.Explanation:
How many revolutions does the object make during the first 3.9 s?
The area which is located under the curve gives us the angle in radians; we divide this by 2π to get units in revs (revolutions).
So for 0 ≤ t ≤ 2,
number of revs = 20rad/s * 2s * 1rev/2π rads = 6.37 revs
So for 2 ≤ t ≤ 3.9,
number of revs = 10rad/s * 1.9s * 1rev/2πrads = 3.02 revs
Therefore the total is about:
6.37 revs + 3.02 revs = 9.39 revs ≈ 9.4 revs
To answer how many revolutions an object makes in 3.9 seconds, we require knowledge of the object's constant angular velocity or angular acceleration. With the angular velocity, the total radians rotated can be found and divided by 2π to get the number of revolutions.
Explanation:The question "How many revolutions does the object make during the first 3.9 s?" involves calculating the number of complete rotations or revolutions an object makes over a given period of time. In physics, this is often related to concepts of rotational motion, including angular velocity and angular acceleration. However, to calculate the number of revolutions over a certain time, we need to know either the constant angular velocity of the object, the angular acceleration, or another related quantity that would allow us to determine how the angle changes over time.
For example, if we know the angular velocity (ω) in radians per second (rad/s), we can calculate the number of revolutions by integrating the angular velocity over the given time period (3.9 s) or multiplying it by time if the angular velocity is constant. Since one revolution is equivalent to 2π radians, we can determine the total number of revolutions by dividing the total angle rotated (in radians) by 2π.
In the winter sport of curling, players give a 20 kg stone a push across a sheet of ice. the stone moves approximately 40 m before coming to rest. the final position of the stone, in principle, only depends on the initial speed at which it is launched and the force of friction between the ice and the stone, but team members can use brooms to sweep the ice in front of the stone to adjust its speed and trajectory a bit; they must do this without touching the stone. judicious sweeping can lengthen the travel of the stone by 3 m.
From Newton’s law of motion, the relation for velocity, acceleration and displacement is given by v^2 = vo^2 + 2as. Where v and vo are final and initial velocity respectively, and a, s are the acceleration and displacement respectively. From Newton’s second law, F = ma. Where m is the mass.
The magnitude of the frictional fore can be calculated only before estimating the ston’s acceleration. The initial speed of stone is mentioned in the problem as 3 m/s. Also, after 40m, the stone will stop. This means that its final speed is 0 m/s and the displacement is 40m.The acceleration of rock is calculated as:
(0 m/s)^2 = (3 m/s)^2 + 2a (40m).
9 m^2/s^2 = -2a(40m)
a= -9m^2/s^2/80m = 0.1 m/s^2.
This means that deceleration will occur and this will stop the stone. Substituting to Newton’s second law of motion,
-F = 20kg * -0.1 m/s^2. Further solve,
F = 20kg * 0.1 m/s^2 = 2N. Hence, the magnitude frictional force is 2N.
In curling, the final position of the stone depends on its initial speed and the force of friction. Team members can use brooms to adjust the stone's speed and trajectory. The force of friction opposes the stone's motion.
Explanation:In the winter sport of curling, the final position of the stone depends on the initial speed at which it is launched and the force of friction between the ice and the stone. Team members can use brooms to sweep the ice, which can adjust the stone's speed and trajectory. By judicious sweeping, they can lengthen the travel of the stone by a few meters. The force of friction between the ice and the stone will oppose the motion of the stone and slow it down.
The initial speed at which the stone is launched will determine how far it travels before coming to rest. If the stone is launched with a higher initial speed, it will travel a farther distance. The force of friction between the ice and the stone will also influence the distance the stone travels. A higher frictional force will cause the stone to slow down more quickly, resulting in a shorter travel distance.
Hd 10180g orbits with a period of 600 days at a distance of 1.4 au from its star. what is the ratio of the star's mass to our sun's mass?
Use the expression -
P²k = a³---(i)
Where P is time in years, a is in AU, k is the function of the Sun's mass and set to unity.
Further, we're looking for
the mass of the new star we have slightly modified Kepler's Third Law. After
all, the inverse of a constant is also a constant. The reason we do it is
because we want an answer in the form of K:1, where K is the mass of the HD 10180
and the mass of the Sun is 1, so k needs to start out on the other side.
Convert 600 days in years = 600/365 = 1.64 years
Put this in the expression mentioned at (i) -
1.64²k = a³
You gave us a = 1.4 AU
1.64²k = 1.4³ ; isolating k
k = 1.4³/1.64²
k = 2.744/2.702 = 1.015
So, the requisite ratio = 1.015 : 1
The ratio of the star's mass to the sun's mass is about 1.02 : 1
[tex]\texttt{ }[/tex]
Further explanationCentripetal Acceleration can be formulated as follows:
[tex]\large {\boxed {a = \frac{ v^2 } { R } }[/tex]
a = Centripetal Acceleration ( m/s² )
v = Tangential Speed of Particle ( m/s )
R = Radius of Circular Motion ( m )
[tex]\texttt{ }[/tex]
Centripetal Force can be formulated as follows:
[tex]\large {\boxed {F = m \frac{ v^2 } { R } }[/tex]
F = Centripetal Force ( m/s² )
m = mass of Particle ( kg )
v = Tangential Speed of Particle ( m/s )
R = Radius of Circular Motion ( m )
Let us now tackle the problem !
[tex]\texttt{ }[/tex]
Given:
mass of the sun = M_sun = 1.99 × 10³⁰ kg
radius of the orbit = R = 1.4 AU = 2.094 × 10¹¹ m
Orbital Period of planet = T = 600 days = 600 × 24 × 3600 = 5.184 × 10⁷ seconds
Asked:
mass of the star = M = ?
Solution:
Firstly , we will use this following formula to find the mass of the star:
[tex]F = ma[/tex]
[tex]G \frac{ Mm}{R^2}=m \omega^2 R[/tex]
[tex]G M = \omega^2 R^3[/tex]
[tex]\frac{GM}{R^3} = \omega^2[/tex]
[tex]\omega = \sqrt{ \frac{GM}{R^3}}[/tex]
[tex]\frac{2\pi}{T} = \sqrt{ \frac{GM}{R^3}}[/tex]
[tex]M = \frac{4 \pi^2 R^3}{GT^2}[/tex]
[tex]M = \frac{4 \pi^2 (2.094 \times 10^{11})^3}{6.67 \times 10^{-11} \times (5.184 \times 10^7)^2}[/tex]
[tex]\boxed {M \approx 2.0 \times 10^{30} \texttt{ kg} }[/tex]
[tex]\texttt{ }[/tex]
Next , we will calculate the ratio of the star's mass to the sun's mass as follows:
[tex]M : M_{sun} = (2.0 \times 10^{30}) : (1.99 \times 10^{30})[/tex]
[tex]\boxed{M : M_{sun} \approx 1.02 : 1}[/tex]
[tex]\texttt{ }[/tex]
Learn moreImpacts of Gravity : https://brainly.com/question/5330244Effect of Earth’s Gravity on Objects : https://brainly.com/question/8844454The Acceleration Due To Gravity : https://brainly.com/question/4189441[tex]\texttt{ }[/tex]
Answer detailsGrade: High School
Subject: Physics
Chapter: Circular Motion
"for general projectile motion, when the projectile is at the highest point of its trajectory"
in a 4 kilometer race, a runner completes the first kilometer in 5.9 minutes, the second kilometer in 6.2 minutes, the third kilometer in 6.3 minutes, and the final kilometer in 6 minutes. the average speed of the runner for the race is approximately
Answer:
9.83 km/h
Explanation:
Given: in a 4 kilometer race, a runner completes the first kilometer in 5.9 minutes, the second kilometer in 6.2 minutes, the third kilometer in 6.3 minutes, and the final kilometer in 6 minutes.
To Find: the average speed of the runner for the race.
Solution:
In a 4 kilometer race,
time required to travel first kilometer = [tex]5.9[/tex] [tex]\text{minutes}[/tex]
time required to travel seoond kilometer = [tex]6.2[/tex] [tex]\text{minutes}[/tex]
time required to travel third kilometer = [tex]6.3[/tex] [tex]\text{minutes}[/tex]
time required to travel final kilometer = [tex]6[/tex] [tex]\text{minutes}[/tex]
we know that,
[tex]\text{Average speed}=\frac{\text{Total distance traveled}}{\text{Total time taken}}[/tex]
Total distance traveled = [tex]4[/tex] [tex]\text{kilometer}[/tex]
Total time taken = [tex](5.9+6.2+6.3+6)[/tex]
= [tex]24.4[/tex] [tex]\text{minutes}[/tex]
= [tex]\frac{24.4}{60}[/tex] [tex]\text{hours}[/tex]
putting values,
[tex]\text{Average speed}=\frac{4}{\frac{24.4}{60}}[/tex]
[tex]\text{Average speed}=\frac{4\times60}{24.4}[/tex]
=[tex]9.83[/tex] [tex]\text{km}/ \text{h}[/tex]
the average speed of the runner for the race is approximately [tex]9.83[/tex] [tex]\text{km}/ \text{h}[/tex]
The normal boiling point of cyclohexane is 81.0 ℃. what is the vapor pressure of cyclohexane at 81.0 ℃?
Final answer:
The vapor pressure of cyclohexane at its normal boiling point of 81.0 ℃ is 101.3 kPa.
Explanation:
The question is asking for the vapor pressure of cyclohexane at its normal boiling point of 81.0 ℃. By definition, the normal boiling point of a liquid is the temperature at which its vapor pressure is equal to the external atmospheric pressure at sea level, which is 101.3 kPa (or 1 atmosphere). Therefore, the vapor pressure of cyclohexane at 81.0 ℃ is 101.3 kPa.
An airport has runways only 198 m long. a small plane must reach a ground speed of 39 m/s before it can become airborne. what average acceleration must the plane's engines provide if it is to take off safely from its airport? answer in units of m/s 2 .
______ interference occurs when two waves overlap and the resulting wave has a larger amplitude.
Answer: The correct answer is constructive interference.
Explanation:
Interference is the phenomenon in which there is superposition of the two waves. Interference are of two types: Constructive interference and Destructive interference.
Constructive interference occurs when the there is a superposition of the two waves. The resulting wave has a large amplitude.
Destructive interference occurs when the there is a superposition of the two waves. The resulting wave has a low amplitude.
Therefore, Constructive interference occurs when two waves overlap and the resulting wave has a larger amplitude.
Answer:
B. Constructive
A race car is moving with a velocity of 144 kilometers/hour. The driver applies the brakes, and the car comes to a halt in 12.0 seconds. What is the average acceleration of the car during those 12.0 seconds? –12.0 meters/second2
A helicopter is ascending vertically with a speed of 7.00 m/s. at a height of 155 m above the earth, a package is dropped from a window. how much time does it take for the package to reach the ground? [hint: the package's initial speed equals the helicopter's.]
If f = 136 lb , determine the resultant couple moment.
A 150 n sled is being pulled up a 28 ° rough ramp at constant speed by a force of 100 n parallel to the ramp. with what acceleration will the crate slide down, if it is released at some point on the ramp?
Which are the components of a typical refracting telescope? hints?
The components of a typical refracting telescope are basically convex object and convex eyepiece. The correct option is 1.
A typical refracting telescope is made up of a series of convex lenses. The objective lens is a convex lens positioned at the front of the telescope that collects and focuses light from distant objects. At the focus point, it creates an inverted actual picture.
The eyepiece, which is located at the telescope's back end, is likewise a convex lens. Its goal is to amplify the picture created by the objective lens so that the viewer may see a bigger, upright, magnified image.
In a standard refracting telescope, the correct combination is a convex objective lens and a convex eyepiece.
Thus, the correct option is 1.
For more details regarding refracting telescope, visit:
https://brainly.com/question/33083140
#SPJ6
Your question seems incomplete, the probable complete question is:
Which are the components of a typical refracting telescope?
1.convex object and convex eyepiece
2. concave object and convex eyepiece
3. convex object and concave eyepiece
What is the connection between the liver (organ), UV radiation (sunlight), and bone tissue
A 20000 kg rocket has a rocket motor that generates 3.0×105 n of thrust. part a what is the rocket's initial upward acceleration?
Answer:
a=5.20 m/s²
Explanation:
Given Data
Thrust = T (N)=3.0×10⁵N
Mass=m=20000kg
To find
acceleration=a=?
Solution
Newton Second law states that
The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
(resultant force F)=ma
a=(resultant force F)/m
where
(resultant force F) is (Thrust-weight)
Weight = mg = 2.0^4 kg*9.8 N/kg = 1.96^5 N
a = (resultant force F) / mass
a = (T - mg)/m = (3.0^5 N - 1.96^5 N)/ 2.0^4 kg
a=5.20 m/s²
The rocket's initial upward acceleration is 5.2m/s²
According to Newton's second law of motion
[tex]\sum F = ma[/tex]
The sum of forces is the difference between the weight and the thrust
[tex]\sum F = T -W[/tex]
[tex]T - W = ma\\a=\frac{T-W}{a}[/tex]
Given the following parameters:
T = [tex]3.0 \times 10^5 N[/tex]
W = [tex]20,000 \times 9.8 = 1.96 \times 10^5 N[/tex]
m = [tex]20,000kg[/tex]
Substitute the given parameters into the formula to have:
[tex]a=\frac{(3.0-1.96)\times 10^5}{2\times 10^4} \\a=\frac{1.04\times 10^5}{2\times 10^4} \\a = 0.52 \tmes 10\\a = 5.2m/s^2[/tex]
Hence the rocket's initial upward acceleration is 5.2m/s²
Learn more here: https://brainly.com/question/8898885