Astronomers who discovered quasars found that they show of their spectral lines and are thus probably much ________ than nearby galaxies.

Answer:

The energy stored in a room is 0.0286 Joules.

Explanation:

Given that,

The dimensions of the room are 3 m by 4 m by 2.4 m

The strength of the Earth's magnetic field, [tex]B=5\times 10^{-5}\ T[/tex]

We need to find the energy stored in a room due to the Earth'a magnetic field. It is given by :

[tex]E=\dfrac{B^2}{2\mu_o}V[/tex]

Here,

V is the volume of the room

[tex]E=\dfrac{(5\times10^{-5})^{2}}{2\times4\pi\times10^{-7}}\times(3\times4\times2.4)\\\\E=0.0286\ J[/tex]

[tex]E=0.0286\ J[/tex]

So, the energy stored in a room is 0.0286 Joules. Hence, this is the required solution.

Answer:

90 N

Explanation:

The force applied to the ball is given by:

[tex]F=\frac{\Delta p}{\Delta t}[/tex]

where

[tex]\Delta p[/tex] is the change in momentum of the ball

[tex]\Delta t[/tex] is the time taken

The change on momentum of the ball is:

[tex]\Delta p=m\Delta v=(0.45 kg)(20 m/s)=9 kg m/s[/tex]

So, the force applied is

[tex]F=\frac{9 kg m/s}{0.10 s}=90 N[/tex]

(a) The currents direction must be counterclockwise.

(b) The magnitude of the current in the outer wire is 15.83 A.

The direction of the current will flow in such a way that the magnetic field due to the wires combination will cancel out. Thus, the current will flow in opposite or counterclockwise direction.

The magnitude of the current is calculated using the following formulas;

[tex]\frac{I_1}{D_1} = \frac{I_2}{D_2} \\\\I_2 = \frac{I_1 D_2}{D_1} \\\\I_2 = \frac{10 \times 38}{24} \\\\I_2 = 15.83 \ A[/tex]

Thus, the magnitude of the current in the outer wire is 15.83 A.

Learn more about current in outer wire for zero electric field here: https://brainly.com/question/13200775

Carbon-14 dating is used to date organic materials, not inorganic objects like stone tablets, which require other methods like potassium-argon dating.

Carbon-14 dating, or radiocarbon dating, is a method used to date materials that were once living and contains carbon. The process measures the decay rate of carbon-14, a radioisotope, to determine the age of organic artifacts up to approximately 60,000 years old. However, this technique is not suitable for dating stone tablets or any other inorganic objects such as pottery or projectile points because they do not contain carbon from living organisms. To date geological materials like stone, other methods such as potassium-argon dating are used. This method relies on the radioactive decay of potassium-40 to argon-40 to estimate the age of igneous and volcanic rocks.

Neither more nor less will be the force the cart is using.

A force defines an effect that can change the motion of an object so that an object with mass can change its velocity, that is, accelerate. Force can also be described intuitively as a push or pull where force has both magnitude and direction, making it a vector quantity.

Some types of forces are as follows:

A force is applied on an object by another object where the idea of ​​force is not limited to living things or non-living things.

Thus, Neither more nor less will be the force the cart is using.

Learn more about Force, here:

https://brainly.com/question/28875770

#SPJ5

The magnitude of the external force [tex]F_c[/tex] required to keep the cart motionless at point c can be determined by equating the sum of the forces acting on the cart in the horizontal direction to zero. The magnitude of [tex]F_c[/tex] is equal to the force of friction [tex]\( f_{\text{friction}} \)[/tex] opposing the motion at point c.

To determine [tex]F_c[/tex], consider the forces acting on the cart. At point c, the forces involved are the force of gravity [tex]\( F_{\text{gravity}} \),[/tex] the normal force N exerted by the surface, and the force of friction [tex]\( f_{\text{friction}} \)[/tex]. For the cart to remain motionless, the net force acting on it must be zero. Therefore, [tex]\( F_{\text{net}} = F_{\text{gravity}} + f_{\text{friction}} = 0 \)[/tex].

The force of gravity [tex]\( F_{\text{gravity}} = m \cdot g \)[/tex], where m is the mass of the cart and g is the acceleration due to gravity. The normal force N is equal to the weight of the cart, [tex]\( N = m \cdot g \)[/tex]. Since the cart is motionless, the force of friction [tex]\( f_{\text{friction}} \)[/tex] will be equal in magnitude and opposite in direction to [tex]\( F_{\text{gravity}} \)[/tex] and N . Therefore, [tex]\( f_{\text{friction}} = F_{\text{gravity}} = m \cdot g \)[/tex].

Consequently, the magnitude of the external force F_c necessary to keep the cart motionless at point c is [tex]\( m \cdot g \)[/tex], which is the force of friction opposing the motion. This force is equivalent to the force required to counteract the gravitational force pulling the cart downward, ensuring equilibrium and no motion in the horizontal direction.

Answer:

Speed of Blythe is 9.8 m/s.

Explanation:

Mass of Blythe =40 kg

Mass of Geoff = 79 kg

Speed = 5 m/s

Suppose, we determine the Blythe's speed after she pushes Geoff

Since, initial momentum is zero final momentum should be zero.

Using momentum of conservation

[tex]m_{B}v_{B}+m_{G}v_{G}=0[/tex]

[tex]v_{B}=-\dfrac{m_{G}v_{G}}{m_{B}}[/tex]

Put the value into the formula

[tex]v_{B}=-\dfrac{79\times5}{40}[/tex]

[tex]v_{B}=-9.8\ m/s[/tex]

Negative sign shows that he move in direction opposite to Geoff.

Hence, Speed of Blythe is 9.8 m/s.

A) At h=4.0 m

At h=4.0 m, the kinetic energy of the ball is zero, because its velocity is 0, so

[tex]K=\frac{1}{2}mv^2=\frac{1}{2}(0.18 kg)(0)^2=0[/tex]

The gravitational potential energy is instead:

[tex]U=mgh=(0.18 kg)(9.8 m/s^2)(4.0 m)=7.06 J[/tex]

So, the total mechanical energy is

[tex]E=K+U=0+7.06 J=7.06 J[/tex]

B) At h=3.0 m

The gravitational potential energy is now:

[tex]U=mgh=(0.18 kg)(9.8 m/s^2)(3.0 m)=5.29 J[/tex]

Since air resistance is negligible, the total mechanical energy is conserved, so it is still

[tex]E=7.06 J[/tex]

And so we can find the kinetic energy as follows:

[tex]K=E-U=7.06 J-5.29 J=1.77 J[/tex]

C) At h=2.0 m

The gravitational potential energy is now:

[tex]U=mgh=(0.18 kg)(9.8 m/s^2)(2.0 m)=3.53 J[/tex]

Since air resistance is negligible, the total mechanical energy is conserved, so it is still

[tex]E=7.06 J[/tex]

And so we can find the kinetic energy as before:

[tex]K=E-U=7.06 J-3.53 J=3.53 J[/tex]

Final answer:

Resonance is a condition where a system oscillates at its natural frequency, leading to increased amplitude. It is utilized in radio tuning, medical MRI diagnostics, playground swings, and ensuring the stability of structures like bridges.

Explanation:

Resonance is a fundamental concept in physics that refers to the condition when a system oscillates at its natural frequency, leading to an increase in amplitude. This phenomenon has several practical applications in our daily lives. For instance, when tuning a radio, the resonant frequency is adjusted to match the frequency of the desired radio station, ensuring a clear signal. Medical diagnostic tools such as Magnetic Resonance Imaging (MRI) rely on resonance to create detailed images of the human body by making atomic nuclei oscillate using radio waves.

Additionally, children achieve maximum enjoyment on a swing when it is pushed at its natural frequency, embodying the concept of resonance. Even in engineering, understanding resonance is essential to avoid harmful oscillations, as evidenced by historical events like the Tacoma Narrows Bridge collapse or the adjustments made to the Millennium Bridge in London to prevent wobbling.

To find the electric flux passing through a certain portion of a sphere, you would apply Gauss's Law over a closed surface spherical surface centered at the point charge. The flux is directly proportional to the enclosed charge (60uC in this case), and remains constant irrespective of the shape or size of the enclosing surface.

To calculate the electric flux through a given spherical region based on Gauss's Law, you apply this principle over a closed spherical surface of the given radius that is concentric with the charge. Given an isolated point charge of 60uC at the origin, the electric field, and consequently the electric flux, is spherically symmetrical.

Per Gauss's Law, the total electric flux through any closed surface surrounding a point charge is proportional to the enclosed charge. In this case, our enclosed charge is 60uC. For a sphere of radius 26 cm, we would determine the electric flux originating from the charge at the origin passing through this sphere.

Flux calculation here is similar to that for an infinite sheet of charge with minor adjustments specific to a spherical surface. However, note that the net flux through any closed surface is zero if no charges are included within the surface, and remains constant regardless of the shape or size of the enclosing surface, as long as it encloses the same amount of charge.

https://brainly.com/question/30267804

#SPJ3

An unintended consequence of the widespread use of pesticides on corn crops is the rise of pesticide-resistant insects.

Pesticides is a combination of two or more chemical compounds, and it is used to kill bugs, which includes the insects that cause plant infections, weeds, and other pests spread disease and destroy plant crops.

Here,

One of the key factors contributing to the harm that contemporary industrial agriculture causes to the environment is the unexpected consequences of pesticides. Pesticides can have an adverse effect on non-target species, including plants, animals, and people, because they contain poisonous compounds that are supposed to kill pest species.

The use of pesticides on crops has the potential to endanger wildlife since they can volatilize and be carried by the wind into surrounding places.

Pest resistance develops over time as a result of repeated pesticide use, and the consequences on other species may contribute to the pest's reappearance.

Hence,

An unintended consequence of the widespread use of pesticides on corn crops is the rise of pesticide-resistant insects.

To learn more about pesticides, click:

https://brainly.com/question/24316938

#SPJ3

Answer:

Nail should be located at the bottom of claw as possible And hand should be place at the tip of handle as possible without losing perfect grip.

Load x Load distance = Effort x Effort distance

Effort = Load x load distance / Effort distance.

The inductance needed to store 3.0kWh of energy in a coil carrying a current of 300A is approximately 66.67 mH.

The energy stored in an inductor can be calculated using the formula E = 0.5 * L * I², where E is the energy in joules, L is the inductance in henrys, and I is the current in amperes. Given the energy E = 3.0kWh = 3.0 * 10^6 joules (1kW = 10^3 W and 1 Wh = 3600 J) and current I = 300A, we can calculate the inductance.

By rearranging the formula to solve for L, we get L = 2E / I². Substituting the given values, we find that the inductance needed to store this amount of energy is approximately 66.67 mH (milliHenry).

https://brainly.com/question/40927173

#SPJ3

Answer:

The purpose of having a control sample is the possibility of having something to compare the results of your experiment.

For example with medicine, the sample that received the medicine are in X state now, this has not enough information really, you need a control sample that is in a state Y, and now you can compare the states X and Y and see how your medicine really affects the patients.

Other example is how a substance X changes the color of something, if you do not have a control sample, at the end of the experiment you can't se the actual color change, so your really need a control sample.

The control sample is called the "zero" or starting point in an experiment.

(A) The expression for the orbital speed of satellite is [tex]v =\dfrac{\sqrt{2 \times G \times mp}}{a}[/tex].

(B) The energy of satellite is [tex]E = \dfrac{G \times ms \times mp}{a^{2}}[/tex].

Given data:

The mass of satellite is, ms.

The mass of planet is, mp.

The radius of planet is, a.

(A)

We need to find the orbital speed of satellite. So clearly we known that the while going round the planet, a satellite is experienced with centripetal force, balanced by the gravitational force.

So,

Fc = Fg

Here, Fc is the centripetal force and Fg is the gravitational force.

[tex]\dfrac{ms \times v^{2}}{2}=\dfrac{G \times ms \times mp}{a^{2}}[/tex]

G is the universal gravitational constant and v is the orbital speed of satellite.

Solving as,

[tex]\dfrac{ v^{2}}{2}=\dfrac{G \times mp}{a^{2}}\\\\\\v = \sqrt{\dfrac{2 \times G \times mp}{a^{2}}}\\\\\\v = \sqrt{\dfrac{2 \times G \times mp}{a^{2}}}\\\\\\v =\dfrac{\sqrt{2 \times G \times mp}}{a}[/tex]

Thus, we can conclude that the expression for the orbital speed of satellite is [tex]v =\dfrac{\sqrt{2 \times G \times mp}}{a}[/tex].

(B)

The energy of the satellite is nothing but the kinetic energy of satellite. Then the required energy of satellite is,

[tex]E = \dfrac{1}{2} \times ms \times v^{2}\\\\E = \dfrac{1}{2} \times ms \times \dfrac{2G \times mp}{a^{2}}\\\\\\E = \dfrac{G \times ms \times mp}{a^{2}}[/tex]

Thus, we can conclude that the energy of satellite is [tex]E = \dfrac{G \times ms \times mp}{a^{2}}[/tex].

Learn more about the orbital speed here:

https://brainly.com/question/541239

Final answer:

Moving a simple pendulum from Lahore to Murree increases the time period due to a decrease in acceleration due to gravity at a higher altitude. To maintain accurate time, the pendulum's length needs to be shortened.

Explanation:

If a simple pendulum is shifted from Lahore to Murree, the effect on the pendulum's time period will be influenced by the change in acceleration due to gravity, as Murree is at a higher elevation than Lahore. The time period (T) of a simple pendulum is determined by the formula T = 2π√(L/g), where L is the length of the pendulum, and g is the acceleration due to gravity.

Since the value of g decreases with an increase in altitude, moving a pendulum from Lahore to Murree, where the acceleration due to gravity is slightly lesser, will result in an increase in the time period of the pendulum. To maintain the correct time, the length of the pendulum would need to be adjusted. Specifically, to compensate for the reduced gravity and keep the time period constant, the pendulum's length would need to be shortened.

Final answer:

To find the radial and tangential accelerations of the chimney as it falls, we use energy conservation to get the angular velocity, and then kinematic equations for circular motion to find the specific accelerations. The angle at which the tangential acceleration equals g can be found by equating the formulas for tangential acceleration and gravitational acceleration.

Explanation:

To solve for the radial acceleration and the tangential acceleration of the top of a falling chimney at a given angle from vertical, we employ conservation of energy and kinematic equations.

(a) At the instance the chimney makes an angle of 34.1° with the vertical, its height above the ground (h) can be found using trigonometry: h = L * cos(34.1°), where L is the length of the chimney, 53.2 meters. The potential energy (PE) at the initial vertical position is PE_initial = m * g * L (mass m, gravitational acceleration g, height L). The potential energy at the angle is PE_final = m * g * h. The loss in potential energy has been converted into kinetic energy (KE), so KE = PE_initial - PE_final. This kinetic energy can be used to find the angular velocity (ω) using the relationship KE = 1/2 * I * ω², where I is the moment of inertia. For a rod pivoting at one end, I = (m * L²) / 3. From here, ω can be found and used to find the radial acceleration (α_r) which is ω² * L / 2 as the top will travel in a circular trajectory of radius L/2.

(b) The tangential acceleration (a_t) at that point is the time derivative of the tangential velocity, which can be obtained from the angular velocity as a_t = α * L / 2, where α is the angular acceleration. Angular acceleration can be obtained using the relationship a_t = α_r * tan(Θ) at the instantaneous angle.

(c) For the tangential acceleration to be equal to g, we set a_t = g and solve for Θ using the previously established relationship between a_t, α_r, and Θ. This will yield the angle at which the tangential acceleration equals the gravitational acceleration.

The correct answer is - grandparent and grandchild.

Jim has a daughter, The name of his daughter is Bertha. Bertha also has children, two daughters, one of which is Penny. Since Jim's daughter is Bertha, than the children of Bertha are his grandchildren, thus Penny is Jim's grandchild, and Jim is Penny's grandparent.

To determine the reaction orders for CH₃Cl and H₂O in the given reaction, one must analyze rate data showing how changing reactant concentrations affect the reaction rate, and apply algebraic methods to solve for the orders, which we do not have. Without the specific tabulated data, we cannot provide the exact orders for the reaction.

The reaction orders for the given chemical reaction can be determined using the method of initial rates, which requires experimental data that compares how the reaction rate changes with varying concentrations of the reactants while keeping other conditions constant. Unfortunately, the full tabulated data set required to determine the reaction orders is missing in the question; however, the example provided in the reference indicates how one would go about calculating these orders once the appropriate data is available.

If we had a table showing how the reaction rate varies when the concentrations of CH₃Cl and H₂O are changed, we could look for patterns similar to those described. For instance, if doubling the concentration of CH₃Cl leads to a doubling of the reaction rate, this would suggest that the reaction is first-order to CH₃Cl. If changing the concentration of H₂O does not change the rate, then the reaction would be zero-order to H₂O. The overall reaction order is then the sum of the individual orders.

It is important to carefully analyze the tabulated data, comparing the rates and concentrations and using algebraic methods to solve for the reaction orders of each reactant and determine the overall reaction order for the chemical reaction.