Final answer:
Barricades, vertical panels, drums, cones, and tubes are all considered traffic control devices used in construction zones or areas where traffic needs to be redirected for safety reasons. Each has its unique function to maintain vehicular and pedestrian safety.
Explanation:
Barricades, vertical panels, drums, cones, and tubes are all considered to be traffic control devices. These items are frequently found in construction zones or areas where traffic needs to be redirected for safety reasons. Each of them serves a unique purpose.
Barricades are used to fully or partially block paths to maintain pedestrian or vehicular safety. Vertical panels act as warning or guidance devices. Drums serve as channelizing devices to guide motorists. Cones and tubes are also used to control traffic, with cones often used for shorter-term work and tubes used for longer durations.
Learn more about Traffic control and road safety here:https://brainly.com/question/34569832
#SPJ6
What action should you take if you fail to receive the renewal notice card reminding you that your driver license is about to expire?
When checking ids to identify minors, how can laser engraving used on the new british columbia driver's licenses and identification cards help?
Answer:
It´s easier to spot the fake id´s.
Explanation:
With the new technology of laser engraving that has security measures to be harder or even impossible to clone, fake id´s are easier to spot, this can be used to easily spot minors that are using fake id´s to buy alcohol or to drive.
In his liquidity preference framework, keynes assumed that money has a zero rate of return; thus, when interest rates ________ the expected return on money falls relative to the expected return on bonds, causing the demand for money to ________.
_____ includes any symbol, made with the intent to authenticate a writing.
a. seal
b. informal note
c. mark
d. signature
To balance columns, a _____ is inserted at the end of the text on a page.
In document formatting, to balance columns, a column break is inserted at the end of the text on a page. This allows the text within the columns to line up smoothly and flow evenly across the page.
Explanation:In order to balance columns in document formatting, a column break is usually inserted at the end of the text on a page. Column breaks can make columns of text line up smoothly along the bottom. This way, you ensure that your columns are balanced and the text flows evenly across the page. For instance, in a Microsoft Word document, you can insert a column break by choosing the 'Breaks' option and then 'Column Break' from the 'Page Layout' tab.
Learn more about Column balancing here:https://brainly.com/question/33956105
#SPJ12
Assuming a speed limit is 105 km/hr, what is this in miles per hour? A. 55.247 mph B. 50.247 mph C. 60.247 mph D. 65.247 mph
A(n) ________ cost is a cost whose total amount changes in direct proportion to a change in volume.
a. fixed
b. irrelevant
c. variable
d. mixed
As it pertains to the diffusion of innovation, if the __________ group is relatively small, the number of people who ultimately adopt the innovation likely will also be small.
A client/server network is an example of ________ administration
A client/server network is a model of centralized administration where a central server provides services to client machines, and all control and security measures are maintained centrally by the server.
Explanation:In a client/server network model, a central server provides services or resources to client machines in the network, such as sharing files, applications, and internet access. The server is typically managed and maintained by IT professionals and all the network settings, protocols, and security measures are mostly controlled at this central point.
This form of network organization is centralized because one machine (the server) has control over the others (the clients). Control over data and applications is held centrally, which helps in the management of access rights and also in maintaining the system's security. Therefore, the overall administration is easier as compared to decentralized systems.
Learn more about Client/Server Network here:https://brainly.com/question/33446067
#SPJ6
Broker jill has an agreement with seller alice that says jill will receive compensation if anyone except alice sells alice’s home. what kind of agreement is this?
When might you expect a manager to offer a gentle reminder about hand washing?
Answer:
The correct answer is "If you reach down to pet a service animal".
Explanation:
A manager may offer a gentle reminder about handwashing to a staff member in charge when that person approaches to pet a service animal. Personal hygiene is the responsibility of each individual, but if a person in charge is observed performing an act that involves poor hygiene, hand washing may be suggested.
Have a nice day!
What is the first step in creating a cash flow statement?
Record your income.
Let me know how it goes!
1. Everyone has the same amount of risk. True False
A __________ is a nuclear family that emerged in response to the requirements of an urban, industrial society and the shift away from an agrarian economy.
How does the existence of substitutes affect the price elasticity of demand?
The existence of substitutes affects the price elasticity of demand by making it more elastic. Consumers have the option to choose alternative products instead of paying higher prices, leading to a larger change in the quantity demanded. The availability of substitutes influences how responsive consumers are to changes in price.
Explanation:The existence of substitutes affects the price elasticity of demand. When there are close substitutes available for a product, the demand becomes more elastic. This means that consumers have the option to choose an alternative product instead of paying a higher price. As a result, a small price change can lead to a larger change in the quantity demanded.
For example, if the price of brand A soda increases, consumers may choose to buy brand B soda instead, as they are close substitutes. This shift in demand from brand A to brand B shows the price elasticity of demand for soda. Therefore, the availability of substitutes influences how responsive consumers are to changes in price.
In a given year, US exports were $5 billion and imports were $16 billion. What was the US trade deficit or trade surplus that year?
If the average variable cost of producing 5 costumes in kira’s costume shop is $50, and the fixed cost of the shop is $100. what is the total cost for 5 costumes?
The total cost for producing 5 costumes in Kira's costume shop is $350, which is the sum of fixed costs ($100) and variable costs ($250).
Explanation:The total cost of producing goods is the sum of the fixed costs and the variable costs. In this case, for Kira's costume shop, we need to multiply the average variable cost ($50) per costume by the quantity of costumes produced (5 costumes) to get $250. Then, this total variable cost should be added to the fixed cost, which is $100.
So, the total cost for producing 5 costumes becomes: Variable Cost ($250) + Fixed Cost ($100) = $350
Learn more about Cost Calculation here:
https://brainly.com/question/33521342
#SPJ11
What is the best way to judge the cooking and holding temperatures of food?
"if you are a borrower, which would you prefer to occur during the life of your loan?"
If I were a borrower, I would prefer to occur a level of inflation that is higher than that anticipated at the outset of the loan during the life of my loan.
To add, inflation is a general increase in prices and fall in the purchasing value of money.
The ________ measures the variation in the dependent variable that is explained by variables other than the independent variable in simple regression analysis.
The SSE measures the variation in the dependent variable that is explained by variables other than the independent variable in simple regression analysis.
SSE stands for Sum of Squares Error. There is a straight line that fits an ordered pair series (x,y), simple regression analysis allows us to describe that straight line.
The coefficient of determination, R², and partial correlation coefficient values explain the percentage of variation in the dependent variable that can be accounted for by the independent variable and other factors, respectively.
R², when expressed as a percent, represents the percentage of variation in the dependent (predicted) variable y that can be explained by variation in the independent (explanatory) variable x using the regression (best-fit) line.
The testing of the regression equation partitions the total sum of squares using the total coefficient of determination, R². Note that this is not the same as the square of total correlation.
Partial correlation coefficient values are the additional variability in the response variable that can be explained by an independent variable, such as that by X₁, after the variability of another independent variable, such as X2, alone has been accounted for.
What is the amount of money that the policy holder must pay before the insurance company will reimburse an insured loss?
Deductible
Rider
Premium
Exclusion
the answer to your question is deductible
True or false within bureaucracies, positions are assigned specific responsibilities or given authority in a hierarchical arrangement.
For those who are injured in alcohol-related crashes, we all pay for the cost of their rehabilitation.
Linda owns a bakery and wants to hire bill, a web-page developer, to create a new site for her company. linda does not need bill on staff permanently. bill would be considered a(n) ________
Operational-level manufacturing systems deal with the firm's long-term manufacturing goals, such as where to locate a new plant.
a. True
b. False
economic systems seek to answer what key economics questions? Select all that apply
a) how should goods and services be produced?
b)where goods and services will be produced?
c)when goods and services will be produced?
d)what goods and services will be produced?
e)who will consume goods and services?
Economic systems seek to answer how goods and services should be produced, what goods and services will be produced, and who will consume goods and services.
Explanation:Economic systems seek to answer the following key economic questions:
How should goods and services be produced? This refers to the choice of production methods and technology that will be used.What goods and services will be produced? This pertains to deciding what products and services will be produced to meet consumer demand.Who will consume goods and services? This encompasses determining the allocation of resources and distribution of goods and services among individuals and groups.Learn more about Economic Systems here:https://brainly.com/question/33726453
#SPJ6
A bond has a $1,000 face value, a market price of $1,045, and pays interest payments of $74.50 every year. what is the coupon rate?
What is the time frame for reporting an accident with the kansas department of wildlife and parks if property damage exceeds $2,000?
The Kansas Department of Wildlife and Parks requires immediate reporting of accidents if property damage exceeds $2,000.
The time frame for reporting an accident with the Kansas Department of Wildlife and Parks if property damage exceeds $2,000 is **immediately** or **as soon as possible** after the incident. It is crucial to report accidents promptly to comply with legal requirements and facilitate insurance claims processing. Failing to report timely can lead to complications in determining liability for damages.
What is a reasonable wattage capacity for a power supply to be used with a system that contains a dvd drive, three hard drives, and a high-end video card?
A reasonable wattage capacity for a power supply to be used with a system that contains a dvd drive, three hard drives, and a high-end video card is 700 watts.
Wattage capacity is according to the components present in the system. The wattage capacity for a power supply is determined by adding up all the wattages and then add 30%.
A power supply for a system with a DVD drive, three hard drives, and a high-end video card should have a minimum wattage capacity of 600W to 1000W. This is based on the general power requirements of these components and allows for some additional power for other smaller components and future upgrades.
Explanation:In order to specify a reasonable wattage capacity for a power supply in a system that contains a dvd drive, three hard drives, and a high-end video card, you would first need to consider the power requirements of each of these components. Generally, a DVD drive consumes around 15-30W, each hard drive might require 15-25W and a high-end video card can range from 200-500W. Considering these power requirements and adding some spare for other smaller components and future upgrades, you should look for a power supply with a wattage capacity of at least 600W to 1000W. However, these are just estimates and the actual power requirements could be higher or lower based on the specific models of the components.
Learn more about Power Supply here:https://brainly.com/question/32460638
#SPJ12
Technician a says that a brake spoon is used to adjust brake shoes when the drum is installed. technician b says that a brake hold-down spring tool is used to remove and install hold-down springs. who is correct?