Calculate the density of an object that has a mass of 43 g and a volume of 56.0 ml.

Answer:

The average density of whole milk is 8.6291 lbs/gal.

Explanation:

The average density of whole milk is [tex]1.034 g/cm ^3[/tex].

1 g = 0.00220462 lbs

[tex]1 cm^3=0.000264172 gallons[/tex]

[tex]1.034 g/cm ^3=\frac{1.034\times 0.00220462 lbs}{1\times 0.000264172 gal}[/tex]

[tex]=8.6291 lbs/gal[/tex]

The average density of whole milk is 8.6291 lbs/gal.

metric is the answer

Answer:

Sulfur ₁₆S³²

Explanation:

The sulfur have sixteen protons sixteen neutrons and sixteen electrons. The sum of neutrons and protons is equal to atomic mass. So the given element have sixteen protons and sixteen electron, the atomic mass would be 32 and the element with atomic mass 32 is sulfur.

The number of electrons are equal to the number of protons. In the given element two electrons are more than number of protons. It means element gain two extra electron from another element and it is present in ionic form.

It is present in given form:

S²⁻

Electronic configuration:

S₁₆ = [Ne] 3s² 3p⁴

To complete the octet sulfur gain two electrons from other element and get stable.

Answer:

[tex]^{32}_{16}S^{2-}[/tex]

Explanation:

Atomic number : It is defined as the number of electrons or number of protons present in a neutral atom.

However, when we talk about the atomic number of the ion, it is not equal to the number of electrons as electron can be gained or loosed.

This is why, more appropriately, the number of the protons which are present in the nucleus of the atom is called the atomic number.

Thus, number of protons = atomic number = 16

The element must be sulfur.

Since, number of protons is not equal to the number of electrons, thus the isotope will not be neutral.

There are 2 more electrons than the number of protons and thus, the isotope will be having a charge of -2.

Mass number is the number of the entities present in the nucleus which is the equal to the sum of the number of protons and electrons.

Mass number = Number of protons + Number of neutrons  = 16 + 16 = 32 neutrons

The identity is:- [tex]^{32}_{16}S^{2-}[/tex]

First we have to refer to the reaction between the acid and the base: 

H2SO4 + 2 NaHCO3 ---> 2 H2O + 2 CO2 + Na2SO4 

From this balanced equation we can see that for every 1 mol of acid (H2SO4), we need 2 mol of base (NaHCO3) to neutralize it. Given 28 ml of 5.8 M acid, we need to find out how many mols of acid that is: 

28mL * (1L/1000mL) * 5.8 mol/L =  0.1624 mol H2SO4

Since we need 2 mol of base per mol of acid, we need:

 2*0.1624 mol = 0.3248 mol NaHCO3 

MolarMass of NaHCO3 is 84.01 g/mol 

0.3248 mol*(84.01g/mol) = 27.29 g NaHCO3

Answer: The mass of sodium hydrogen carbonate that must be added is 27.28 g

Explanation:

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (in mL)}}[/tex]

Molarity of sulfuric acid solution = 5.8 M

Volume of solution = 28 mL

Putting values in above equation, we get:

[tex]5.8M=\frac{\text{Moles of sulfuric acid}\times 1000}{28mL}\\\\\text{Moles of sulfuric acid}=0.1624mol[/tex]

The chemical equation for the reaction of sulfuric acid and sodium hydrogen carbonate follows:

[tex]H_2SO_4(aq.)+2NaHCO_3(aq.)\rightarrow Na_2SO_4(aq.)+2CO_2(g)+H_2O(l)[/tex]

By Stoichiometry of the reaction:

1 mole of sulfuric acid reacts with 2 moles of sodium hydrogen carbonate.

So, 0.1624 moles of sulfuric acid will react with = [tex]\frac{2}{1}\times 0.1624=0.3248mol[/tex] of sodium hydrogen carbonate

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Molar mass of sodium hydrogen carbonate = 84 g/mol

Moles of sodium hydrogen carbonate = 0.3248 moles

Putting values in above equation, we get:

[tex]0.3248mol=\frac{\text{Mass of sodium hydrogen carbonate}}{84g/mol}\\\\\text{Mass of sodium hydrogen carbonate}=(0.3248mol\times 84g/mol)=27.28g[/tex]

Hence, the mass of sodium hydrogen carbonate that must be added is 27.28 g

Particles move independently of one another and are widely spaced.

Final answer:

The mass of 15 cm³ of gold, with a density of 19.3 g/cm³, is 289.5 g when calculated using the formula m = d × V.

Explanation:

The density of gold is 19.3 g/cm³.

To find the mass of 15 cm³ of gold, you can use the formula for density, which is mass divided by volume (d = m/V).

Since we know both the density and the volume, we can rearrange the formula to solve for mass (m = d × V).

In this case, the mass (m) would be 19.3 g/cm³ times 15 cm³, which equals 289.5 g.

The density of one gold atom is approximately 19.34 g/cm³, calculated by dividing its mass by its volume.

To calculate the density of one gold atom, Need to find its volume and then divide its mass by that volume.

Step 1: Calculate the volume of the gold atom.

The volume of a sphere can be calculated using the formula:

[tex]V_{sphere} = (4/3)\pi r^3[/tex]

Given that the diameter (d) of the gold atom is 272 pm (picometers), you can find the radius (r) by dividing the diameter by 2:

r = 272 pm / 2 = 136 pm = 1.36 x [tex]10^{-8} cm[/tex] (since 1 pm = [tex]10^{-10[/tex] cm)

Now, plug this radius into the formula for the volume of the sphere:

[tex]V_{sphere[/tex] = (4/3)π(1.36 x [tex]10^{-8[/tex] cm)^3 ≈ 1.69 x [tex]10^{-23[/tex] cm^3

Step 2: Calculate the density of one gold atom.

Now that you have the volume of one gold atom, you can calculate its density using the given mass of 3.27 x [tex]10^{-13[/tex] ng (nanograms). First, convert the mass to grams:

1 ng = [tex]10^{-9[/tex] g, so 3.27 x [tex]10^{-13[/tex] ng = 3.27 x [tex]10^{-22[/tex] g

Now, use the formula for density, which is density (ρ) = mass (m) / volume (V):

ρ = (3.27 x [tex]10^{-22[/tex] g) / (1.69 x [tex]10^{-23[/tex] cm^3) ≈ 19.34 g/[tex]cm^3[/tex]

So, the density of one gold atom is approximately 19.34 g/[tex]cm^3[/tex].

Answer: Option (D) is the correct answer.

Explanation:

A chemical change is defined as the change which occurs due to change in chemical composition of a substance. A chemical change always leads to the formation of a new compound or substance.

For example, when an electric current passes through liquid water, hydrogen gas passes accumulates at one electrode and oxygen accumulates at the other.

Since, atoms of water are separating out. As a result, chemical properties will change. This means that a chemical change has occurred.

Also, bonds of water, ([tex]H_{2}O[/tex]) are breaking down. Hence, energy will be absorbed to break the bonds.

Whereas energy is always released upon formation of bonds.

Thus, we can conclude that the statement a chemical change has occurred, with energy being absorbed, is true.

Final answer:

The solute that increases the boiling point the most in a 0.15 m aqueous solution is one that dissociates into the most particles, like NaCl, because it has a larger effect on boiling point elevation than a non-dissociating substance like glucose.

Explanation:

The solute that produces the highest boiling point in a 0.15 m aqueous solution is determined by the number of particles it provides in the solution upon dissolving. According to the colligative property known as boiling point elevation, the more particles a solute generates, the higher the increase in the boiling point. Salts such as NaCl dissociate into ions, thereby increasing the boiling point of the solution more than non-dissociating molecules like glucose. Therefore, a solute like NaCl, which dissociates into two separate ions Na+ and Cl- would generate a higher elevation than glucose at the same molality because the ionization of NaCl results in twice the number of particles in the solution.

Using the formula ΔT = Kb × m (where ΔT is the increase in boiling point, Kb is the molal boiling-point elevation constant, and m is the molality), we can calculate the boiling point elevation. With a given Kb for water of 0.51°C/m, a 0.15 m solution of NaCl would lead to a higher boiling point than a 0.15 m solution of a non-electrolyte like glucose. This is because each mole of NaCl provides 2 moles of particles, doubling the ΔT value compared to glucose which does not dissociate.

The mass of 0.28 mol of iron is 15.638 grams.

To find the mass of 0.28 mol of iron, we need to use the molar mass of iron. The molar mass of iron, as given in the periodic table, is 55.85 g/mol. This means that 1 mole of iron weighs 55.85 grams.

Step-by-Step Calculation:

1. Find the molar mass of iron:

2. Calculate the mass of 0.28 mol of iron:

So,

Therefore, the mass of 0.28 mol of iron is 15.638 grams.

The formula for density is given as:

density = mass / volume

So given the density and the mass, we can get the volume. The mass can simply be measured using a weighing scale therefore the student can now determine the volume by rearranging the formula:

volume = mass / density

A:This atom is very likely to bond with another atom.

B:This atom is only slightly likely to bond with another atom

C:This atom is not likely at all to bond with another atom.

And I Think The Answer Is A

All isotopes of the same element have the same number of protons. Number of neutrons in different atoms of the same element is free to vary. Since, different elements react differently, different elements have different numbers of protons. Atoms with the same number of protons and vary neutrons behave chemically similar. The number of electrons in a neutral atom depends on the number of protons. All chemical reactions involve transfer or sharing of electrons it stands to reason, neutrons are NOT responsible for chemical reactivity. It's arguable whether protons or electrons dictate chemical reactivity certainly the SUBATOMIC nuclear particle that dictates reactivity is the PROTON.

Answer:

Explanation:

To determine if the bock will float you need:

The block has 3 dimmentions: lenght, wide and height, its volume is:

[tex]V=wide*lenght*height[/tex]

Once calculated it and measured the  weight, you calculate the density:

[tex]\rho=\frac{m}{V}[/tex]

If the density of the block is smaller than the density of water (arroung 1000 kg/m3) the block will float.

To find the number of helium atoms in a blimp with 537 kg of helium, first, calculate the mass of one helium atom. Then determine the number of atoms in 1 kg of helium, and multiply by 537 to get the total number of helium atoms in the blimp.

To calculate the number of helium atoms in a helium blimp containing 537 kg of helium, we must first know the mass of a single helium atom. A helium atom contains 2 protons, 2 neutrons, and 2 electrons. The mass of a helium atom can be approximated by considering the mass of the protons and neutrons, as the mass of electrons is negligible. This gives us a mass of about 4 atomic mass units (u) per helium atom. Since 1 u is approximately 1.66 × 10-27 kg, the mass of a helium atom is 4 × 1.66 × 10-27 kg.

To find the number of atoms in 1 kg of helium, you can divide 1 kg by the mass of one helium atom. Then, for 537 kg, multiply the number of atoms in 1 kg by 537. The Avogadro's number (6.022 × 1023 atoms/mol) is used as a conversion factor to convert moles of helium to atoms of helium. Conversely, to convert atoms to moles, you would divide the number of atoms by Avogadro's number, not multiply as stated incorrectly by the friend.

Here is the calculation in steps:

Answer is: Block 2 is the least dense.

d(metal) = m(metal) ÷ V(metal).

Volume is the same for all metals, so density only depends on mass of the block of the metal.

Smaller the mass of the block, smaller is the density:

d(block 1) = m(block 1) ÷ V.

d(block 1) = 65 g/V.

d(block 2) = 32 g/V.

d(block 3) = 100 g/V.

d(block 4) = 79 g/V.

The characteristic spectrum an element produces indicates the location of its electron as each unique spectral line indicates the electron's movement between specific energy levels or shells in the atom.

The location of an electron can be determined based on the spectrum that an element produces. When an electron absorbs energy, it moves to a higher energy level or shell, also known as an excited state. When it falls back to its original energy state, it emits energy in the form of electromagnetic radiation, producing a unique spectral line. This spectral line or pattern is characteristic of the element, and it can hint at an electron's location in a specific energy level or shell around the nucleus.

https://brainly.com/question/13179344

#SPJ2

I have the same assignment rn witht he graph but i only have 4 points plotted and connected by lines am i doing it wrong plzzz???

The air temperature would drop quickly compared to the soil because the difference between solid and gas. But the ground will stay cooler longer than the air because it contains it better than the air.

Answer:

7.859 × 10^-1 g/mL

Explanation:

D=mass/volume

10.782g/13,72ml= 0.78586 g/ml

7.859 x 10^-1 g/ml