Can someone please help me? I think it might be (D) but I'm not sure...And I need the answer as soon as possible!

Which best explains why a washing machine represents an open system?

(A) It has multiple cycles, such as wash or spin

(B) Most washers can use a variety of laundry detergent brands

(C) The amount of wash in a load varies

(D) Water and Power come from external sources

The area of the oil spill is increasing at a rate of 68 \\pi square meters per second when the radius is 34 meters.

Let's denote the radius of the oil spill as r and the area as A. The area of a circle is given by A = \\pi r^2. To find the rate at which the area is increasing (\\frac{dA}{dt}), we need to differentiate A with respect to time t. Given that the radius increases at a constant rate of 1 m/s (\\frac{dr}{dt} = 1 m/s), and using the chain rule, we have \\frac{dA}{dt} = \\frac{dA}{dr} \\cdot \\frac{dr}{dt} = 2\\pi r \\cdot 1 m/s. When the radius r is 34 m, the rate of increase in area will be \\frac{dA}{dt} = 2 \\cdot \\pi \\cdot 34 m \\cdot 1 m/s = 68 \\pi square meters per second.

When two people, each weighing 690N, board the boat, they displace an additional 0.141 cubic meters of water. This is calculated using the principle of buoyancy, which equates the weight of the water displaced to the weight of the people added.

The question given is a classic example of a problem involving Archimedes' principle in Physics. The weight of the water displaced by a floating object is equivalent to the buoyant force acting upon that object. Considering that the two new people carry an additional weight of 2 * 690 N (1380 N in total), the extra volume of water they will displace when entering the boat can be calculated. In essence, the additional displaced water corresponds to the increase in the boat's weight when the two people board.

Since the weight of the water displaced is equivalent to the weight of the people added, and considering that the density of water is roughly 1000 kg/m³, the additional volume displaced (V) can be found by dividing the total weight (W) by the product of gravity's pull (g, roughly 9.8 m/s²) and water's density (ρ).

Therefore, the volume can be calculated as follows:

V = W / (g * ρ)

Substituting the known values, we get V = 1380 N / (9.8 m/s² * 1000 kg/m³) = 0.141 m³.

So, the two people displace an additional volume of 0.141 cubic meters of water when they get into the boat.

https://brainly.com/question/19168433

#SPJ12

Basically, a sun-sized star will spend most of its lifetime as main sequence star

Notably, a main sequence star is fairly average in size, and tends to spend close to 10 billion years at this stage, where its main function is continuously fusing hydrogen to helium which generates light and heat on earth, which are essential for every human and all other living organisms.

At this stage, a sun-sized star maintains a steady nuclear reaction, and the amount of time it spends is determined by its mass.

All stars have starting phase, including the Sun, and their existence commences when a dense region of clouds or cold gas and dust called nebulae begins to shrink and warm up. Notably, these clouds are relatively large in size, and stars like the sun are enormous balls of plasma that unavoidably fill every space around with heat and light.

Just like humans, stars also live, and like humans, not forever. Although, a typical star could live up to several billions years are specified on the first paragraph. A star starts as a gas cloud and ends a star remnant. The life cycle of a star is in seven (7) phases. These phases are listed below:

LEARN MORE:

KEYWORDS:

Answer:

It is C!

Explanation:

I got a 100% trust me

A 100-watt light bulb uses 360,000 joules of energy per hour, calculated by multiplying the power (100 watts) by the time (3600 seconds) the bulb is illuminated.

To calculate the energy used by a 100-watt light bulb in one hour, you can use the relationship between watts, joules, and time. Since power (in watts) is defined as energy (in joules) per time (in seconds), we can rearrange this to find that energy is equal to power multiplied by time. For a 100-watt light bulb being on for one hour (which is 3600 seconds), the energy consumption would be 100 watts× 3600 seconds.

Therefore, a 100-watt light bulb uses 360,000 joules of energy per hour.

Answer: carbon dioxide

Explanation:

If a 10 N net force is applied to an object, which then accelerates at 4 m/s², then the mass of the object would be 2.5 kilograms .

Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum. The mathematical expression for Newton's second law is as follows ,

F =  mass × acceleration

As given in the problem if a 10 n net force is applied to an object, which then accelerates at 4 m/s² .

10 = m × 4

m = 10 / 4

m = 2.5 kilograms

Thus, if a 10 N net force is applied to an object, which then accelerates at 4 m/s², then the mass of the object would be 2.5 kilograms .

To learn more about Newton's second law here , refer to the link ;

brainly.com/question/13447525

#SPJ5

I don't think avoiding would be an effective conflict management strategy, because if it's something serious or even something small you shouldn't really ever avoid anything especially if it's between you and another person because it could damage something between you two for awhile or maybe forever. So no i don't think that is a good why to handle something.

if an astronaut on a strange planet has a mass of 80 kilograms and a weight of 240 newtons, then the value of the acceleration due to gravity on this planet would be 3 meters per second².

It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,

The acceleration due to gravity = The weight on the planet/mass of the astronaut

The acceleration due to gravity in the strange planet = 240/80

                                                                                         = 3 m / s²

Thus, the acceleration caused by gravity on a foreign planet would be 3 meters per second² if an astronaut there weighs 240 newtons and has an 80-kilogram mass.

To learn more about gravity from here, refer to the link;

brainly.com/question/4014727

#SPJ2

Final answer:

In a multipolar neuron, electrical signals are carried from the dendrites to the cell body, then actively propagated along the axon to the axon terminals, and ultimately communicated to other cells.

Explanation:

In a typical multipolar neuron, the direction an electrical signal is carried starts at the multipolar neuron's dendrites, which receive incoming signals. These signals then travel passively to the cell body, where they reach the axon hillock. The axon hillock plays a crucial role in integrating signals from multiple synapses, and once the signals are adequately integrated, they are actively propagated along the axon. This axon leads to specialized endings known as axon terminals, which interface with other neurons, muscles, or glands to communicate the signals further.

Multipolar neurons, characterized by a single axon and multiple dendrites, are abundant in the central nervous system, including the brain and spinal cord. They are responsible for relaying sensory and motor information throughout the brain, causing reactions such as muscle contractions. An example of a multipolar neuron is the Purkinje cell located in the cerebellum, noted for its elaborate branching dendrites.

Answer:

a short half-life and it is taken up by a specific part of the body

Explanation:

Radioisotopes useful for medical diagnostics are those with a short half-life and high uptake in specific body parts, allowing for precise imaging while minimizing radiation exposure to patients.

The characteristics of a radioisotope that make it useful for diagnosing medical problems are that it has a short half-life and is taken up by a specific part of the body. A short half-life ensures that the radioisotope decays quickly, minimizing the patient's exposure to radiation. The uptake by specific body parts allows for targeted imaging, where these radioisotopes can replace a stable element in a compound, now called a radiopharmaceutical, to visualize or diagnose conditions within particular organs or tissues. For example, radioactive iodine is used to monitor thyroid activity, and Technetium-99m, with a half-life of about six hours, is employed for cardiac and other organ imaging due to its ability to be taken up in areas of interest like heart muscle or inflamed regions, thus providing crucial diagnostic information.

Final answer:

B. Its dust conducts electricity.

Explanation:

Using emery cloth for polishing the commutator of an appliance motor can generate conductive dust particles. When these particles come into contact with the commutator, they can cause short circuits or other electrical malfunctions, potentially damaging the motor. While option A, wearing the surface too much, could also be a concern, the primary reason to avoid emery cloth is the risk of conductive dust. Options C and D are not directly related to the electrical conductivity issue associated with emery cloth. Therefore, option B is the most appropriate choice to avoid potential electrical hazards during motor maintenance.

Final answer:

The magnitude of the spaceship's velocity is calculated using the formula for momentum (p = mv). With a momentum of 30,000 kg-m/s and a mass of 400 kg, the velocity of the spaceship is 75 m/s to the right.

Explanation:

To find the magnitude of the velocity of the spaceship, we use the formula for the momentum, which is the product of mass and velocity: p = mv where p is momentum, m is mass, and v is velocity. Given the momentum (p) as 30,000 kg-m/s and the mass (m) as 400 kg, we can rearrange the equation to solve for velocity (v): v = p / m.

Plugging in the values, the calculation for the velocity (v) will be: v = 30,000 kg-m/s ÷ 400 kg, which equals 75 m/s. Therefore, the magnitude of the spaceship's velocity is 75 m/s to the right.

Body-centered cubic and face-centered cubic are types of cubic lattices with specific atom arrangements described in crystal structures.

Body-centered cubic (BCC) and face-centered cubic (FCC) are types of cubic lattices in crystal structures. BCC has atoms at the center of a cube and at the vertices, totaling two atoms per unit cell, while FCC has atoms at the corners and centers of the faces, resulting in four atoms per unit cell.

The student's question falls under the category of Physical Science, specifically Physics. Without a specific question, it's hard to provide a precise answer, but the answerer is open to discussing any topic whether it’s forces, light and waves or other. More details are needed to provide accurate assistance.

The subject of your question lies within the field of Physical Science, specifically Physics. Physical Science is a broad field covering numerous aspects of natural science and includes topics like Physics and Chemistry. To answer your question more precisely, it would be helpful to know the exact topic or concept you are trying to understand.

For instance, if you're studying forces, we could discuss concepts like Newton's laws of motion, gravity, friction, etc., or if you're exploring the world of light and waves, we could delve into the behaviour of light, reflection, refraction and the wave-particle theory. The goal is to help you gain a firm understanding of the topic at hand.

Please provide more details so that we can more accurately assist you with your Physics/Physical Science question.

https://brainly.com/question/32123193

#SPJ6

The question involves forming scientific queries related to photosynthesis and temperature acclimation, topics under the AP Chemistry scope. One could ask how AZ and DIDS impact the efficiency of photosynthesis, and how temperature acclimation affects carbon dioxide absorption and release rates.

The question asks to pose scientific questions regarding path of carbon in photosynthesis using AZ and DIDS - which relates to Chemistry, specifically the understanding of biochemical pathways. Moreover, it also asks to pose scientific questions that could lead to an improved understanding of temperature acclimation mechanisms or improvements in models of atmospheric carbon dioxide concentrations.

In photosynthesis, carbon molecules from carbon dioxide are converted into sugars and this process is temperature dependent. Therefore, understanding both the mechanisms regulating temperature acclimation, as well as the path of carbon in photosynthesis, provides deeper insights into how plants interact with the atmosphere and influence climate change.

For example, a question concerning the path of carbon could be: 'How do AZ and DIDS influence the efficiency of the photosynthetic carbon reduction cycle?'. Concerning temperature acclimation and atmospheric carbon dioxide: 'How does the process of temperature acclimation in plants influence the rate of carbon dioxide absorption and release?'

https://brainly.com/question/29764662

#SPJ6

Answer:

decreases

Explanation:

The force with which the earth attracts any body towards its centre is called the force of gravity. It is also called as the weight of the body.

The formula of force of gravity is given by

[tex]F = m \times g[/tex]

where, m is the mass of the body and g be the acceleration due to gravity.

The force of gravity depends on the mass of the object and the value of acceleration of gravity at that place.

If the mass of the body decreases, the force of gravity also decreases.

Answer:

Speed refers to the distance an object travels per unit of time only, whereas velocity also indicates the direction of travel.

Explanation:

#PennFoster

This is false because kinetic energy also depends on the mass, and the mass of a train would be different from the mass of a car.

Answer;

Dotted half note

The rhythmic note that has three beats is called a dotted half note.

Explanation;

A dotted note is a music note* of any length with a small dot after its note-head. A dotted half note is equivalent to 1 half note + a quarter note, or 3 beats.  

A dotted quarter note, on the other hand is equivalent to, 1 quarter note + an eighth note: 1 1/2 beats while a dotted eighth note = 1 eighth note + a sixteenth note: 3/4 beat

A dotted half note has the same time value as a dotted half rest. A half rest lasts for two beats while a dotted half rest lasts for 3 beats.

The rhythmic note that has three beats is called a dotted half note.

The duration of a note is indicated by its shape and the presence of additional symbols.

A dotted half note is one such note that represents a specific duration.

A half note typically receives two beats in common time  which means it is held for the duration of two quarter notes.

However, when a dot is added to the right side of a note, such as a half note, it extends its duration by half.

This means that a dotted half note lasts for three beats instead of the usual two beats of a regular half note.

Thus, the rhythmic note that has three beats is called a dotted half note.

Learn more about dotted half note here: https://brainly.com/question/30398942

#SPJ6

The formula used in calculating for values of work is given as:

W = F d

However on the above formula, the force is constant but i this case, it is changing. Therefore we make use of the general form with the integral notation: 
W = ∫F(x) dx

with limits of x from 0 to 25 since only half of the rope is be pulled

The equation for F (x) is equal to the product of mass density and length x:
F(x) = 0.5x 
Substituting this into the integral work equation:
W = 0.5∫x dx

W = 0.5(0.5) [x2^2 – x1^2]                  ---> x from 0 to 25

W = 0.25 [25^2 -0]