Consider a sample of gas in a container on a comfortable spring day in chicago, il. the celsius temperature suddenly doubles, and you transfer the gas to a container with twice the volume of the first container. if the original pressure was 12 atm, what is a good estimate for the new pressure?

Answer:

Most accidents happen in open motorboats 16 feet or less.

Answer:

D. Magnetic and electrical forces are similar because they are both related to the interactions between charged particles.

Explanation:

When charge particles are placed near to each other then the two charges will attract or repel each other by electrostatic force given by

[tex]F = \frac{kq_1q_2}{r^2}[/tex]

while if charge particles are moving with respect to each other then in that case the magnetic field produces by the two moving charges will exert force on the two charges.

This magnetic force on moving charge is given as

[tex]F = qvB[/tex]

now here we can say that both electrostatic force and magnetic force are related to charge particles so these two forces are similar to each other

so correct answer will be

D. Magnetic and electrical forces are similar because they are both related to the interactions between charged particles.

The bubbles that form and rise when water boils contain primarily water vapor. When the temperature reaches 100°C, the vapor pressure inside the bubbles equalizes with the atmospheric pressure, causing them to rise. This process is what we observe as boiling.

When water boils, you can see bubbles that rise to the surface. These bubbles contain water vapor. At lower temperatures, like 20°C, the bubbles start with some dissolved air and water vapor. As the temperature rises to boiling point (100°C), the amount of water vapor inside the bubbles increases because the vapor pressure reaches 1.00 atm, equalizing with atmospheric pressure. This causes the bubbles to grow and rise to the surface, where they burst, releasing water vapor into the air.

Noise-canceling in headphones works from a combination of microphones, electronic circuitry, and speakers to reduce or eliminate external sounds.

A more tranquil and immersive listening experience is achieved with noise-canceling headphones, which use a mix of speakers, electronic circuitry, and microphones to decrease or completely remove outside noises.

This noise-cancellation procedure is performed in real-time, continuously modifying the anti-noise signal as the outside noise changes. Consequently, low-frequency disturbances like background chatter, air conditioner humming, and motor noise can be significantly reduced with the help of active noise-canceling headphones.

On the ear cups or earbuds of active noise-canceling headphones are small microphones. These microphones capture ambient and background noise from the outside world.

The noise-canceling circuitry in the headphones receives the noises captured by the microphones and cancels them out. This circuitry analyses the sound signals to find undesired outside noise.

Hence, noise-canceling in headphones works from a combination of microphones, electronic circuitry, and speakers to reduce or eliminate external sounds.

To learn more about microphones, here:
https://brainly.com/question/21291597

#SPJ6

We have that from the Question"The number of significant figures in the measurement 0.000 305 kg is " it can be said that  The number of significant figures in the measurement 0.000 305 kg is

From the Question we are told

The number of significant figures in the measurement 0.000 305 kg is

Generally the rule of significant number state that

Therefore

We cont all none zero number

We have

X=3

Therefore

The number of significant figures in the measurement 0.000 305 kg is

For more information on this visit

https://brainly.com/question/19007362?referrer=searchResults

A. 22 Million...........................................................

Final answer:

Fluid clutches are used on equipment that is subjected to various loads and forces. In physics, fluid mechanics is the study of how fluids behave under different conditions, including how they transmit forces and pressures. Hydraulic systems, which use fluid clutches, are a key application of fluid mechanics in engineering.

Explanation:

Fluid clutches are used on equipment that is subjected to various loads and forces. In physics, fluid mechanics is the study of how fluids behave under different conditions, including how they transmit forces and pressures. Hydraulic systems, which use fluid clutches, are a key application of fluid mechanics in engineering.

For example, in heavy machinery like backhoes, hydraulic and mechanical lever systems, powered by fluid clutches, are used to transfer forces and lift heavy loads. These systems can increase or decrease the force applied to them by controlling the pressure and area of the fluid.

Answer:

25.0 %

Explanation:

Answer:

Scientists used it to develop nuclear power

Answer:

They are Nonspontanious

Explanation:

(APEX)

Using Ohm's Law, the electric oven with a resistance of 10.0 Ω and a voltage of 220 V draws a current of 22 A.

An electric oven with a resistance of 10.0 Ω connected to a voltage of 220 V will draw a current that can be calculated using Ohm's Law, which is I = V/R, where I is the current, V is the voltage, and R is the resistance.

Applying the values, we have I = 220 V / 10.0 Ω = 22 A. Therefore, the oven draws a current of 22 A when operating at 220 V.

The coefficient of linear expansion of the coin be 1.55 × 10 ^-5 /°f.

The phenomena known as thermal expansion can be seen in solids, liquids, and gases. In this procedure, the application of heat causes an object or body to expand (temperature). The term "thermal expansion" refers to an object's propensity to change its dimensions as a result of heat, including length, density, area, and volume. The substance's kinetic energy increases when it is heated.

Given that:

the original diameter of the coin: l = 1.55 × 10^-2 m.

Increase in temperature: Δt =  79 °f.

Increase in diameter of the coin: Δl = 1.90 × 10^-5 m.

So,  the coefficient of linear expansion: α = Δl/(lΔt )

=  1.90 × 10^-5 m/( 1.55 × 10^-2 m × 79 °f)

= 1.55 × 10 ^-5 /°f

Hence, the coefficient of linear expansion  be 1.55 × 10 ^-5 /°f.

Learn more about  thermal expansion here:

https://brainly.com/question/1992029

#SPJ5

The Kinetic Molecular Theory explains the behavior of gases based on the motion of particles and their interactions. It includes assumptions about particle motion, collisions, and kinetic energy dependence on temperature.

Kinetic Molecular Theory:

Gases consist of tiny particles in constant, random motion.

Collisions between particles are perfectly elastic with no energy loss.

There are no attractive/repulsive forces between particles.

The average kinetic energy of gas particles increases with temperature.

Final answer:

When the handle angle is 0 degrees, no minimum pulling force is needed. When the handle angle is 30 degrees, the minimum pulling force needed is 36,000 N.

Explanation:

To calculate the minimum pulling force needed to pull a 900-N lawn roller over a 5-cm curb, we can use trigonometry and the concept of work. The work done to lift the roller over the curb is equal to the force applied multiplied by the distance moved in the direction of the force. Since the force is perpendicular to the direction of motion when the handle angle is 0 degrees, no work is done.

Therefore, no minimum pulling force is needed. When the handle angle is 30 degrees, the work done is equal to the force applied multiplied by the vertical distance lifted. Using trigonometry, the vertical distance lifted is given by 5 cm multiplied by the sine of 30 degrees, which is 2.5 cm (or 0.025 m). Therefore, the minimum pulling force needed is the work done divided by the distance moved, which is 900 N divided by 0.025 m, equal to 36,000 N.

Final answer:

To calculate the time it would take to drive around Earth's equator at a speed of 143 km/h, you use the formula t = d/v, resulting in approximately 279.7 hours. This is an ideal, theoretical scenario.

Explanation:

The question is asking how long it would take to drive around the Earth's equator if you were driving at 143 km/h, given that the Earth's circumference is approximately 40,000 km. To solve this, we will use the formula for speed which is v = d/t, where v is the velocity or speed, d is the distance, and t is the time.

To find the time, we rearrange the formula to t = d/v. Plugging in the values, we get t = 40,000 km / 143 km/h. This calculates to approximately 279.7 hours. However, this is an ideal scenario, ignoring factors such as the need for stops, variations in speed, and the impossibility of driving continuously around the equator due to oceans and other geographic barriers.

Answer:

C-Changing the S to N

Explanation:

As we know that magnetic field lines originated from North pole of magnet and then terminate into the south pole of magnet.

Now if we put similar poles of magnet in front of each other then we can say that the magnetic field lines of two poles will repel each other and due to this two similar poles have repulsion force.

Similarly if two different poles of magnet will place in front of each other then the magnetic field lines will originate from north pole and terminate at south pole.

This will show attraction force between the poles of magnet.

Now we can see the figure that magnetic field lines are originating from both poles here as well as these lines are repelling each other.

So here both poles must have North pole

So correction here must be

C)-Changing the S to N

The correct answer to this is:

“Air traffic controllers”

These people are the personnel who is responsible for the safety, orderly, and swift flow of planes flying in and out of airports using the global air traffic control system. They are generally stationed in air traffic control centers and control towers on the airport ground. They monitor the position, speed, and elevation of aircraft in their designated airspace visually and by radar, and give directions to the pilots by radio.

Answer:

Individuals can adapt their behavior to their environment.

Explanation:

I just know (;

Hence the heat transfer that occurs from a system will be -120 J.

Heat transfer refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.

The given data in  the  problem is;

ΔU is the internal energy -150 J

W is the work fon = - 30 J

Q is the heat transfer that occurs from a system

The internal energy of the system is found as;

[tex]\rm \triangle U = Q + W \\\\-150 =Q-30 \\\\ Q=-120 \ J[/tex]

The heat transfer that occurs from a system will be -120 J.

To learn more about the heat transfer refer to the link;

https://brainly.com/question/13433948

The energy of a photon in a microwave is calculated by the Planck-Einstein relation, followed by substituting the given wavelength into the equation: E=(hc)/λ. Then convert the result, if necessary, from joules to electron-volts.

This problem requires knowledge of the relationship between wavelength, frequency, and energy in electromagnetic waves, such as those emitted by a microwave. The energy of a photon is given by the Planck-Einstein relation:

E=hf

where h is Planck's constant (6.62607015 × 10⁻³⁴ Js), f is the frequency, and E is energy. The frequency can be found from the speed of light (c) and the wavelength (λ) using c = f λ. Thus, E can also be computed as E=(hc)/λ.

For a microwave oven emitting waves of 12.9 cm wavelength, first convert the wavelength to meters: 12.9 cm = 0.129 m. Then substitute this, along with the values for h and c, into the equation to find the solution.

Remember, the resulting energy will be in joules but can be easily converted to electron-volts (eV), if necessary, as 1 eV = 1.602 x 10⁻¹⁹ J

https://brainly.com/question/2088247

#SPJ3

The potential difference between the origin and (3.0 m, 4.0 m) in an electric field of 12 v/m is 36 V, pointing in the direction opposite to the electric field.

The potential difference (ΔV) between two points in an electric field can be calculated using the formula: ΔV = -E x (Xf - Xi), where E is the electric field strength, and Xf and Xi are the final and initial positions, respectively. In this case, the electric field is in the positive x-direction and given as 12 v/m, and the point of interest is (3.0 m, 4.0 m). However, because the electric field is only in the x-direction, the y-coordinate does not affect the outcome.

So, Xf = 3.0 m (the x-coordinate of the point) and Xi = 0 (as we're calculating the potential difference from the origin).

Substituting the given values into the equation, we get ΔV = -12 v/m x (3.0 m - 0) = -36 V.

The negative sign indicates that the potential decreases in the direction of the electric field. So, the potential difference between the origin and the point (3.0 m, 4.0 m) is 36 V, in the direction opposite to the electric field.

https://brainly.com/question/23716417

#SPJ12