Given 7.45 g of butanoic acid and excess ethanol, how many grams of ethyl butyrate would be synthesized, assuming a complete 100% yield? express your answer in grams to three significant figures.
The equation for the reaction is:
C₄H₈O₂ + C₂H₅OH = C₆H₁₂O₂ + H₂O
Now you see that the number of the moles of butanoic acid and etyl butyrate is equal in
the reaction. That means;
number of moles of C₄H₈O₂ = number of moles of C₆H₁₂O₂
mass of C₄H₈O₂/ Molar mass of C₄H₈O₂ = mass of C₆H₁₂O₂/ molar mass of C₆H₁₂O₂
mass of C₆H₁₂O₂ = molar mass of C₆H₁₂O₂ x mass of C₄H₈O₂/ Molar mass of C₄H₈O₂
Now, assuming 100% yield, the mass of ethyl butyrate produced is:
= 7.45/88.11 x 116.16
=9.82g
Thus, the theoretical yield of ethyl butyrate is 9.82g.
Given 7.45 g of butanoic acid, a perfect 100% yield would produce approximately 9.82 g of ethyl butyrate. This is calculated based on the mole to mole correspondence between butanoic acid and ethyl butyrate and the molar masses of the two substances.
Explanation:To solve this question, we first need to determine the molar mass of butanoic acid (C4H8O2), which is approximately 88.11 g/mol. Given that we have 7.45 g of butanoic acid, we can calculate the number of moles of butanoic acid to be 7.45 g / 88.11 g/mol ≈ 0.0845 mol.
The reaction of butanoic acid with ethanol produces ethyl butyrate in a 1:1 ratio. So, the same number of moles of ethyl butyrate (0.0845 mol) would be produced in an ideal case.
The molar mass of ethyl butyrate (C6H12O2) is around 116.16 g/mol. Thus, the grams of ethyl butyrate synthesized from the reaction would be 0.0845 mol x 116.16 g/mol ≈ 9.817 g.
Assuming a 100% yield, we would have 9.817 g of ethyl butyrate. However, to express the answer with three significant figures, we round it to 9.82 g.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ3
Is it possible for a reaction to have a large equilibrium constant but small forward and reverse rate constants?
The equilibrium constant K and the forward rate constant k1 and backward rate constant k2 has the following relation:
K = k1 / k2
So from the equation, we can say that yes it is possible to have large K even if k1 is small given that k2 is very small compared to k1: (k2 very less than 1)
k2 << k1
The condition which makes the equilibrium constant very large with the smaller value of the forward and backward rate constant is,
[tex]\boxed{{{\mathbf{k}}_{\mathbf{f}}}{\mathbf{>>}}{{\mathbf{k}}_{\mathbf{b}}}}[/tex]
Further explanation:
Equilibrium constant:
The equilibrium constant is expressed as the equilibrium concentration of products divided by the equilibrium concentration of reactants raised to power of their stoichiometric coefficient in the balanced chemical equation.
For the given general reaction,
[tex]{\text{aA + bB}}\to{\text{cC + dD}}[/tex]
The expression for equilibrium constant is,
[tex]K=\frac{{{{\left[{\text{C}}\right]}^{\text{c}}}{{\left[{\text{D}}\right]}^{\text{d}}}}}{{{{\left[{\text{A}}\right]}^{\text{a}}}{{\left[{\text{B}}\right]}^{\text{b}}}}}[/tex]
Here K is equilibrium constant of the reaction.
Another definition:
The equilibrium reaction consists the forward reaction and reverse reaction and both reaction have their respective rate constant, therefore, equilibrium constant can also be defined as the ratio of rate constant of forward reaction to the rate constant of backward reaction.
[tex]K=\frac{{{k_{\text{f}}}}}{{{k_{\text{b}}}}}[/tex]
Here, [tex]{k_{\text{f}}}[/tex] is rate constant of forward reaction and [tex]{k_{\text{b}}}[/tex] is rate constant of backward reaction.
In the given case equilibrium constant should be larger with smaller values of rate constants. Therefore, the rate constants of backward reaction must be very small from the rate constant of backward reaction so that the value of the ratio is very large.
Hence the condition which makes the equilibrium constant very large with the smaller value of forward and backward rate constant is,
[tex]{{\mathbf{k}}_{\mathbf{f}}}{\mathbf{>>}}{{\mathbf{k}}_{\mathbf{b}}}[/tex]
Learn more:
1. Calculation of equilibrium constant of pure water at 25°c: https://brainly.com/question/3467841
2. Complete equation for the dissociation of na2co3(aq): https://brainly.com/question/5425813
Answer details:
Grade: Senior school
Subject: Chemistry
Chapter: Equilibrium
Keywords: Equilibrium, reactions, reverse reaction, forward reaction, backward reaction, rate constant, reverse rate constant, forward rate constant, larger value of equilibrium constant, kf>kb.
How many seconds are required to produce 4.94 mg of chromium metal from an acidic solution of potassium dichromate, using a current of 0.234 a?
Electrochemistry concepts inform us that it takes three moles of electrons to generate one mole of chromium. The amount of charge transferred, coupled with the current allows us to calculate the required time which is 115134041.88 seconds to produce 4.94 mg of Chromium at a current of 0.234 A.
Explanation:The student's question deals with the concepts in electrochemistry, specifically involving the reduction of chromium(III) to chromium(0). The key here is that it takes three moles of electrons to produce one mole of chromium. Therefore, we first need to find out how many moles of electrons are needed to produce 4.94 mg of Chromium, which is 0.0944 moles.
In electrochemistry, the total amount of charge (Q) passed is given by the product of the number of moles of electron (n), the charge per mole of electron (F), and the current (I). F, according to Faraday's constant, is 96485 C mol e. Therefore, Q = n x F x I = 0.0944 moles x 3 mol e per mol Cr x 96485 C mol e = 26942034.48 Coulombs. Now, to find out how much time this takes, we divide Q by the current, using the formula:
time = Q / I = 26942034.48 Coulombs / 0.234 A = 115134041.88 seconds
https://brainly.com/question/31955958
#SPJ12
To produce 4.94 mg of chromium metal using a current of 0.234 A, approximately 117.5 seconds are required. This is calculated by finding the moles of chromium, then determining the charge needed, and finally using the current to find the time. The process involves basic stoichiometry and electrochemistry principles.
To solve this, we need to follow several steps:
First, determine the moles of chromium to be produced. The molar mass of chromium (Cr) is approximately 52 g/mol:
4.94 mg = 0.00494 g
Moles of Cr
= 0.00494 g / 52 g/mol
= 9.5 x 10⁻⁵ mol
Next, calculate the total charge (Q) required to produce the given moles of chromium. The reduction of Cr(III) to Cr(0) uses 3 moles of electrons per mole of Cr:
Total charge (Q) = 9.5 x 10⁻⁵ mol Cr x 3 mol e- / 1 mol Cr x 96485 C/mol e-
Q = 27.5 C
Finally, use the current (I) to find the time (t):
= t = Q / I
= 27.5 C / 0.234 A
= 117.5 seconds
To produce 4.94 mg of chromium metal using a current of 0.234 A, approximately 117.5 seconds are required.
What is the resulting formula unit when calcium (Ca) and sulfur (S) bond?
Answer:
CaS
Explanation:
Calcium is a metal from Group 2, so it has 2 valence electrons. Sulfur is a non-metal from Group 16, so it has 6 valence electrons. Metals and non-metals form ionic bonds, in which metals lose electrons and non-metals gain electrons. In both cases, they follow the octet rule, trying to have the electron configuration of the closest noble gas, which has its valence shell complete with 8 electrons.
Calcium has 20 electrons and loses 2 electrons to have the electron configuration of Ar and form Ca²⁺.
S has 16 electrons and gains 2 electrons to have the electron configuration of Ar and form S²⁻.
In the formula unit, one atom of Ca²⁺ bonds to one atom of S²⁻ to maintain electroneutrality and form CaS.
Which of the two molecules, propane (c3h8) or heptane (c7h16), would have a
a. greater london dispersion forces
b. lower boiling point
c. greater viscosity?
Table 7.1: In photosynthesis, green plants convert carbon dioxide and water into glucose (C6H12O6) according to the following equation:
6CO2(g)+6H2O(l) → C6H12O6(aq)+6O2(g)
Estimate ΔH for the reaction using bond dissociation energies from Table 7.1. Give your answer in kcal. C6H12O6 has five C−C bonds, seven C−H bonds, seven C−O bonds, and five O−H bonds.
Which change increases the amount of iron produced in the equation fe3o4(s) 4h2(g) energy?
To increase the amount of iron produced in the equation Fe3O4(s) + 4H2(g) → energy, you need to increase the amount of hydrogen gas (H2) in the reaction.
Explanation:To increase the amount of iron produced in the equation Fe3O4(s) + 4H2(g) → energy, you would need to increase the amount of hydrogen gas (H2) in the reaction.
According to the equation, for every 4 moles of hydrogen gas, you can produce 1 mole of iron (Fe3O4). So, if you increase the amount of hydrogen gas, you will increase the amount of iron produced in the reaction.
For example, if you double the amount of hydrogen gas from 4 moles to 8 moles, you will also double the amount of iron produced from 1 mole to 2 moles.
Complete combustion of 5.90 g of a hydrocarbon produced 17.9 g of co2 and 9.14 g of h2o. what is the empirical formula for the hydrocarbon?
A hydrocarbon is only composed of C atoms and H atoms. To get the empirical formula, get the moles of C and H.
The molar mass of CO2 is 44 g/mol and that of H2O is 18 g/mol.
moles CO2 = 17.9 g / (44 g / mol) = 0.407 mol
There is 1 mole of C per 1 mole of CO2, hence:
moles C = 0.407 mol
moles H2O = 9.14 g / (18 g / mol) = 0.508 mol
There is 2 moles of H per 1 mole of H2O, hence:
moles H = 0.508 mol * 2 = 1.02 mol
So so far we got:
moles C = 0.407 mol
moles H = 1.02 mol
Divide the two by the smallest number of moles, so divide by 0.407 mol:
C = 0.407 / 0.407 = 1
H = 1.02 / 0.407 = 2.5
Since there cannot be a decimal number of atoms, so multiply both by 2:
C = 1 * 2 = 2
H = 2.5 * 2 = 5
So the empirical formula is:
C2H5 (ANSWER)
What situation do you use a volumetric flask,conical flask,pipette and graduated cylinder? Explain your answer from the accuracy aspects of these apparatus.
When only rough approximations are needed, we use a conical flask.
When we want to measure liquid volumes to an accuracy of within about 1%, we use the graduated cylinders. They are for also used general purpose, but not for sensitive quantitative analysis.
When extreme precise or accurate measurements are needed for dilution or preparation of liquid samples, we use the volumetric flask to contain it.
If we are preparing to perform titration, we will have to use a pipette to transfer very accurate amounts of sample.
1. In which of these cases do we have enough information to say that the atom is electrically neutral?
The atomic number of lithium is 3. How many neutrons does an atom of lithium have if it is represented by the symbol shown below? 7Li
The bonding found in calcium chloride is
Calculate δ h for the reaction:no (g) + o2 (g) ↔ no2 (g). given: 2o3(g) ↔ 3o2(g) δh=-426 kj o2(g) ↔ 2o(g) δh=+ 490 kj no(g) + o3(g) ↔ no2(g) + o2(g) δh=- 200 kj
This liquid metal has more protons than gold, but fewer electrons then thallium.
The number of protons and electrons of an atom is equal and the amount can be obtained by looking at the atomic number of that atom or element.
The atomic numbers are:
Gold = 79
Thallium = 81
So we are looking for the element with an atomic number of 80, that is:
Mercury
Answer:
Mercury (Hg)
The liquid metal that fits the description is mercury (Hg), which has more protons than gold (Au) and is liquid at room temperature. Mercury is unique due to its electronic configuration and is thermally conductive but a poor conductor of heat compared to other metals.
Explanation:The liquid metal in question that has more protons than gold but fewer electrons than thallium is mercury (Hg). Gold (Au) has an atomic number of 79, meaning it has 79 protons. Thallium (Tl) has an atomic number of 81, meaning it has 81 electrons when neutral. Mercury has an atomic number of 80, placing it right between gold and thallium in terms of protons, and since it is a metal and liquid at room temperature, it fits the description given.
Mercury is a metal that is thermally conductive but compared to other metals like copper or silver, it is a poor conductor of heat. However, it is still a fair conductor of electricity. The electronic configuration of mercury is unique and makes it resistant to losing electrons, which contributes to its liquid state at room temperature and its conduction properties.
If a solution at pH 5 undergoes a 1000-fold increase in [OH-], what is the resulting pH?
We have that the the resulting pH is mathematically given as
PH=2
From the question we are told
If a solution at pH 5 undergoes a 1000-fold increase in [OH-], what is the resulting pH?
Molecules of OH ionGenerally the equation for the solution is is mathematically given as
5=-log[H+]
H+=10e-5*1e3
H+=10e-2
Therefore
-log[H+]=-log[10e-2]
PH=2
For more information on Molecules visit
https://brainly.com/question/19922822
when a rock is altered by extreme heat and pressure, what type of rock is the result?
Question 2 the final electron acceptor in the electron transport chain is?
Using water, how could you distinguish between the white solids kcl an pbcl2
Both the white solids, KCl and [tex]{\mathbf{PbC}}{{\mathbf{l}}_{\mathbf{2}}}[/tex] can be distinguished by dissolving them in water.
Further Explanation:
Solubility rules:
1. The common compounds of group 1A are soluble.
2. All the common compounds of ammonium ion and all acetates, chlorides, nitrates, bromides, iodides, and perchlorates are soluble in nature. Only the chlorides, bromides, and iodides of [tex]{\text{A}}{{\text{g}}^+}[/tex], [tex]{\text{P}}{{\text{b}}^{2+}}[/tex], [tex]{\text{C}}{{\text{u}}^+}[/tex] and [tex]{\text{Hg}}_2^{2+}[/tex] are not soluble.
3. All common fluorides, except for [tex]{\text{Pb}}{{\text{F}}_{\text{2}}}[/tex] and group 2A fluorides, are soluble. Moreover, sulfates except [tex]{\text{CaS}}{{\text{O}}_{\text{4}}}[/tex], [tex]{\text{SrS}}{{\text{O}}_{\text{4}}}[/tex], [tex]{\text{BaS}}{{\text{O}}_{\text{4}}}[/tex], [tex]{\text{A}}{{\text{g}}_{\text{2}}}{\text{S}}{{\text{O}}_{\text{4}}}[/tex] and [tex]{\text{PbS}}{{\text{O}}_{\text{4}}}[/tex] are soluble.
4. All common metal hydroxides except [tex]{\text{Ca}}{\left({{\text{OH}}}\right)_{\text{2}}}[/tex], [tex]{\text{Sr}}{\left({{\text{OH}}}\right)_{\text{2}}}[/tex], [tex]{\text{Ba}}{\left({{\text{OH}}}\right)_{\text{2}}}[/tex] and hydroxides of group 1A and that of transition metals are insoluble in nature.
5. All carbonates and phosphates, except those formed by group 1A and ammonium ion, are insoluble.
6. All sulfides, except those formed by group 1A, 2A, and ammonium ion are insoluble.
7. Salts that contain [tex]{\text{C}}{{\text{l}}^-}[/tex], [tex]{\text{B}}{{\text{r}}^-}[/tex] or [tex]{{\text{I}}^-}[/tex] are usually soluble except for the halide salts of [tex]{\text{A}}{{\text{g}}^+}[/tex], [tex]{\text{P}}{{\text{b}}^{2+}}[/tex] and [tex]{\left({{\text{H}}{{\text{g}}_2}}\right)^{{\text{2+}}}}[/tex].
8. The chlorides, bromides, and iodides of all the metals are soluble in water, except for silver, lead, and mercury (II). Mercury (II) iodide is water-insoluble. Lead halides are soluble in hot water.
9. The perchlorates of group 1A and group 2A are soluble in nature.
10. All sulfates of metals are soluble, except for lead, mercury (I), barium, and calcium sulfates.
KCl and [tex]{\text{PbC}}{{\text{l}}_{\text{2}}}[/tex] both are the chloride salts that are white in color. According to the solubility rules, KCl is a soluble salt whereas [tex]{\text{PbC}}{{\text{l}}_{\text{2}}}[/tex] is an insoluble one and forms precipitate.
KCl and [tex]{\text{PbC}}{{\text{l}}_{\text{2}}}[/tex] can be distinguished by dissolving both the salts separately in water. The salt that forms precipitates in water is [tex]{\mathbf{PbC}}{{\mathbf{l}}_{\mathbf{2}}}[/tex] while the one that dissolves completely in water is KCl. This way, both solids can be distinguished.
Learn more:
1. Identify the precipitate in the reaction: https://brainly.com/question/8896163
2. What type of reaction occurs by mixing barium sulfide and sulfuric acid? https://brainly.com/question/5464325
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Chemical reaction and equation
Keywords: KCl, PbCl2, white solids, precipitate, water, solubility rules, soluble, insoluble, dissolving, salts, chlorides, sulfates, bromide, iodide, carbonates, hydroxides.
Which element mo se na or br contains the most moles of atoms in a 1.0 gram sample?
In maintaining proper acid-base balance, protein acts as
1.26 * 10^4 + 2.50 * 10^4 in sceintific notation
Final answer:
The sum of 1.26 x 10^4 and 2.50 x 10^4 in scientific notation is 3.76 x 10^4.
Explanation:
To add 1.26 \(\times\) 10^4 and 2.50 \(\times\) 10^4 in scientific notation, you must ensure both numbers have the same exponent for the base 10. Since they both already have an exponent of 4, you can directly add the coefficients (1.26 + 2.50) and keep the exponent the same, which gives us 3.76 \(\times\) 10^4.
Many metals react with oxygen gas to form the metal oxide. for example, calcium reacts as follows. 2 ca(s) + o2(g) → 2 cao(s) you wish to calculate the mass (g) of calcium oxide that can be prepared from 4.23 g of ca and 2.87 g of o2. (a) what amount (mol) of cao can be produced from the given mass of ca? webassign will check your answer for the correct number of significant figures. mol (b) what amount (mol) of cao can be produced from the given mass of o2? webassign will check your answer for the correct number of significant figures. mol (c) which is the limiting reactant? calcium oxygen (d) how many grams of cao can be produced? webassign will check your answer for the correct number of significant figures. g
what is the wavelength of radio waves ?
Answer : The correct option is, [tex]\text{more than }1\times 10^{-1}\text{meters}[/tex]
Explanation :
Electromagnetic waves : It is defined as a wave where two vectors are vibrating mutually perpendicular to each other and in the direction of the wave. The two vectors are the electric field and the magnetic field.
The gamma-rays, x-rays, ultraviolet-rays, infrared-rays, microwaves and radio-waves are the electromagnetic waves.
The increasing order of electromagnetic waves in terms of wavelength will be,
[tex]\text{gamma-rays}<\text{x-rays}<\text{ultraviolet-rays}<\text{infrared-rays}<\text{microwaves}<\text{radio-waves}[/tex]
The wavelength range of radio waves are, [tex]10^3\text{ to }10^{-2}meters[/tex]
The frequency range of radio waves are, [tex]10^4\text{ to }10^8Hz[/tex]
Therefore, the wavelength of radio waves is, [tex]\text{more than }1\times 10^{-1}\text{meters}[/tex]
The electromagnetic waves spectrum are shown below.
An article suggests that substrate concentration (mg/cm3) of influent to a reactor is normally distributed with μ = 0.40 and σ = 0.09. (round your answers to four decimal places.) (a) what is the probability that the concentration exceeds 0.60? .0131 correct: your answer is correct. (b) what is the probability that the concentration is at most 0.30? .1332 correct: your answer is correct. (c) how would you characterize the largest 5% of all concentration values? the largest 5% of all concentration values are above mg/cm3.
(a). The probability that the concentration exceeds 0.60 is approximately 0.0131.
(b). The probability that the concentration is at most 0.30 is approximately 0.1332.
(c). The largest 5% of all concentration values are above approximately 0.5510 mg/cm³.
z-score is given as:
z=x-μ/σ
x is the value.
μ is the mean.
σ is the standard deviation.
(a).
To find the probability that the concentration exceeds 0.60, the area under the normal distribution curve to the right of 0.60 is calculated.
Calculation of the z-score:
z = (0.60-0.40)/0.09 =2.222
With the normal distribution calculator, the probability associated with the score of 2.22 is approximately equal to 0.0131.
(b).
To find the probability that the concentration is at most 0.30, the area under the normal distribution curve to the left of 0.30 is calculated.
Calculation of the z-score:
z = (0.30-0.40)/0.09 =1.111
With the normal distribution calculator, the probability associated with the score of 1.111 is approximately equal to 0.1332.
(c).
To characterize the largest 5% of all concentration values, the concentration value that corresponds to the 95th percentile of the normal distribution is to be calculated.
Using the standard normal distribution table or calculator, find the z-score that corresponds to the 95th percentile, which is approximately 1.645.
Calculation of the concentration value:
x = μ + z *σ = 0.40+1.645×0.09.
x≅0.5510
Therefore,
(a). The probability that the concentration exceeds 0.60 is approximately 0.0131.
(b). The probability that the concentration is at most 0.30 is approximately 0.1332.
(c). The largest 5% of all concentration values are above approximately 0.5510 mg/cm³.
To know more about z-score, visit:
https://brainly.com/question/31871890
#SPJ12
The question is below!
Which chemical equation shows that the total mass during a chemical reaction stays the same? A) Mg + Cl2 → MgCl2 B) NaOH + MgCl2 → NaCl + MgOH C) 2Na + 2H2O → NaOH + H2 D) H2O + O2 → H2O
Answer: The correct option is A.
Explanation: Law of conservation of mass states that the total mass in a chemical reaction remains conserved that is total mass on the reactant side will always be equal to the product side.
We are given 4 chemical reactions, the total mass during a chemical reaction will be same in the case of reaction A because total number of atoms on the reactant side is equal to the total number of atoms on the product side.
[tex]Mg(s)+Cl_2(g)\rightarrow MgCl_2(s)[/tex]
Mass of Magnesium = 24 g/mol
Mass of Chlorine = 35.5 g/mol
[tex]\text{Mass on the reactant side}=24+(2\times 35.5)=95g/mol[/tex]
[tex]\text{Mass on the product side}=24+(2\times 35.5)=95g/mol[/tex]
From the above, it is visible that the Total mass during this chemical reaction is same.
All the other reactions are not balanced, therefore the total mass will not be the conserved.
Why did you have to treat the solution with ammonium vanadomolybdate to use this method?
Treating the solution with ammonium vanadomolybdate is necessary to form a stable vanadium complex, enabling accurate quantification. This reagent helps to ensure proper reaction conditions for measuring vanadium concentration.
In the context of vanadium quantification, treating the solution with ammonium vanadomolybdate is essential to ensure the formation of a stable and detectable colored complex.
This complex, typically red-brown with the general formula (VO)₂(SO₄)₃, is formed in the presence of H₂O₂ and H₂SO4, and its intensity depends on the amount of vanadium present.
By optimizing the reaction conditions, such as the concentration of H₂O₂ and H₂SO4, and using ammonium vanadomolybdate as a reagent, we can maximize the absorbance at 450 nm for accurate quantitative analysis.
The addition of ammonium vanadomolybdate helps to maintain the proper chemical environment, preventing the interference of other ions and ensuring that the measurement of vanadium concentration is precise.
This reagent assists in forming the colorimetric complex necessary for detection and quantification.
What is the molar mass of fe(nh4)2(so4)2*6h2o?
392.1388 g/mol is the molar mass of the given compound. The molar mass of a material is a bulk attribute rather than a molecular one.
The ratio among the mass with the quantity of a substance (measured in mole) of any sample of a chemical compound is known as the molar mass (M) in chemistry. The compound's molar mass represents an average over numerous samples, which frequently have different masses because of isotopes. A terrestrial average as well as a function of the relative distribution of the isotopes of the component atoms on Earth, the molar mass is most frequently calculated using the standard atomic weights.
FeSO[tex]_4[/tex](NH[tex]_4[/tex])[tex]_2[/tex](SO[tex]_4[/tex])[tex]_2[/tex].6H[tex]_2[/tex]O molar mass=
55.845 + 32.065 + 15.9994×4. + (14.0067 + 1.00794×4)×2 + 32.065 + 15.9994×4 + 6×(1.00794×2 + 15.9994)
=392.1388 g/mol
To know more about molar mass, here:
brainly.com/question/12127540
#SPJ6
All substances taking part in a certain interaction are shown below: Butane is written followed by an addition sign followed by Oxygen followed by an equal to sign followed by Carbon dioxide followed by an addition sign followed by Water. Just below Butane 29 grams is written and just below Carbon dioxide and Water is a parentheses below which 133 grams is written Which of the following is the correct estimate of the amount of oxygen used in the interaction? Sum of 133 g and 29 g Difference between 133 g and 29 g Twice the sum of 133 g and 29 g Twice the difference between133 g and 29 g
Answer:
Difference between 133g and 29g
Explanation:
Select the ester that is formed when propanoic acid reacts with isopropyl alcohol (propan-2-ol) in the presence of heat and an acid catalyst.
Answer : The ester form in this reaction will be, Isopropyl propanoate.
Explanation :
When the carboxylic acid react with an alcohol in acidic medium result in the formation of an ester and this is known as Fischer's esterification.
Mechanism of this reaction :
Step 1 : Protonation of the propanoic acid.
In the presence of the an acid catalyst, protonation of carbonyl oxygen occurs which increases the electrophilicity of carbon.
Step 2 : Attack of isopropyl alcohol on the carbonyl carbon.
As the isopropyl alcohol is a weak nucleophile, it attacks on carbonyl carbon due to increases the electrophilicity.
Step 3 : Deprotonation and elimination of leaving group that means formation of ester.
Now loss of proton occurs from oxonium ion. This proton is captured by the oxygen of [tex]OH^-[/tex] group an hydroxyl group gets converted to a better leaving group named as [tex]H_2O[/tex] (water)
The mechanism are shown below.
The final product is an[tex]\boxed{{\text{isopropyl propanoate}}}[/tex].
Further explanation:
The chemical reaction between an acid and an alcohol molecule to form an ester is known as an esterification reaction. The reaction takes place in acidic medium, and a water molecule gets eliminated.
The reactants given in the question are propanoic acid (acid) and isopropyl alcohol (propan-2-ol) as alcohol. Therefore, the reaction in presence of catalyst is an esterification reaction, and the product is an ester after the removal of water molecule.
The steps involved in mechanism of esterification of propanoic acid and isopropy alcohol is as follows:
Step 1: Reaction is initiated from the protonation of propanoic acid.
Step 2: Then iso-propyl attack on the electrophilic carbonyl carbon.
Step 3: In the last step, initially the water molecule is removed, and then deprotonation occurs. Deprotonation occurs to produce the final product isopropyl propanoate.
The mechanism of esterification of propanoic acid and isopropyl alcohol is attached in the image.
Learn more:
1. Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603
2. Product formed when 2-propanol react with NaH: https://brainly.com/question/5045356
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Esterification
Keywords: Esterification, isopropyl alcohol, propanoic acid, fisher esterification, mechanism, step 1protonation of propanoic acid, step 2 attack on the electrophilic carbonyl carbon, step 3 deprotonation to produce isopropyl propanoate, product, isopropyl propanoate.