Answer:
Option A and C i.e., RAM and Motherboard is the correct answer to the following question.
Explanation:
AutoCAD is the computer program which is used by the George to create 2-dimensional and 3-dimensional pictures or drawing but their AutoCAD running slow because the minimum requirement of RAM for the following program is 8GB or George has less than 8GB RAM in his system so that program is running slow.
The processor requirement for the AutoCAD program is more than 2.5 GHz 0r 3+ GHz, if he has less than 2.5 GHz then they also required to upgrade the processor or change the motherboard.
Final answer:
The hardware that could cause George's computer to show less RAM than what was installed is RAM, motherboard, and possibly the CMOS battery due to seating, recognition, or system settings issues.
Explanation:
When George's computer shows less RAM than installed after an update, the hardware likely causing this issue could be A. RAM, C. Motherboard, or E. CMOS battery. RAM is crucial as it is the main memory that the CPU utilizes for storing information that needs to be quickly accessed. If there is less RAM detected, it could be due to a RAM module not being properly seated or recognized. The motherboard is responsible for housing the RAM modules, and if there's an issue with the motherboard slots or chipset, it might not recognize all the RAM installed. The CMOS battery helps maintain system settings including the system's RAM configuration. If the battery is failing, it may lead to incorrect hardware settings being loaded, potentially affecting the RAM detected at startup.
A device in a subnet needs to send a packet to a device in a different subnet. To which device will it address the outgoing packet?
Answer:
The Router
Explanation:
A router is a layer 3 device in the OSI network model. As the name implies, it routes packets logically from source to destination. An interface in a router represents a segment or a configured stand-alone network, with a specific subnet mask.
Routers have routing tables that learns a network route statically or dynamically with protocols. When a packet is to be sent to a device in another network, the router receives the packet and forwards the traffic to the destination (through another interface, if connected directly) or to the next hop router interface alone the path to the destination.
When a networking device in a subnet needs to send a packet to another device in a different subnet, it will: address the outgoing packet to it's configured default gateway.
A router can be defined as a networking device that is designed typically for forwarding outgoing data packets between two or more networks based on a well-defined routing protocol.
Generally, routers are typically configured using a standard routing protocol with an IP address as the default gateway.
A subnet is an abbreviation for subnetwork and it can be defined as a logical subdivision (partitioning) of a larger IP network into two or more smaller IP networks.
In Computer Networking, when a networking device belonging to a particular subnet needs to send a packet to another networking device configured in a different subnet, it will address the outgoing packet to it's configured default gateway, which is mainly referred to as a router.
In conclusion, a router is the default gateway to which a networking device addresses or forwards an outgoing packet.
Read more: https://brainly.com/question/24117833
Which component of service-oriented DSS can be defined as data that describes the meaning and structure of business data, as well as how it is created, accessed, and used?
Answer:
The correct answer to the following question will be Metadata Management.
Explanation:
The management of data about the other data is known as Metadata Management. When the data is generated, updated, deleted, created, metadata is generated.
Benefits of Metadata management:
To locate data for a person, the metadata management make it easier.Project delivery become faster.Maintain information of organization.Hence, the Metadata Management will be the best suitable component which defined as the structure and meaning of business data.
You are replacing several laptop components to upgrade a customer's laptop computer. Which device ALWAYS involves the detaching and re-attaching of antenna connectors?
A. the screenB. Mini-PCIeC. the touchpadD. the wireless card
Answer:
A. The screen
Explanation:
The laptop is a miniaturized computer system that supports individuals in their daily activities. They are portable and cheaper than the normal computer systems.
Every component of the laptop is smaller in size and sometimes specifications than the desktop.
The screen is mounted on a foldable arm with the antenna of the wireless card fixed at the top of the fold.
So the antenna must be uninstalled for the screen to be uninstalled as well.
What manipulation technique should be reported when an FIE resolves a legal or travel problem for an insider?
Answer:
Sympathizer
Explanation:
Since, this issue is solved internally no one is going to blame anybody since its legal issue as well apart from being a travel problem.And no one wants to fight legal issues if it can be avoided. Hence, the FIE will show sympathy with the individual or officials who had suffered due to the issue as they have lost the time definitely, and FIE cannot bring back the time for them.
Final answer:
Reporting an FIE's involvement in resolving an insider's legal or travel issue is necessary due to potential manipulation. Including a detailed account of personal involvement in the situation ensures transparency. Bringing in outside consultants can provide an objective resolution to complex situations.
Explanation:
When an FIE (Foreign Intelligence Entity) resolves a legal or travel problem for an insider, it might be indicative of manipulation techniques or undue influence. Such actions could potentially raise national security concerns, particularly if the insider has access to sensitive information. Reporting this behavior is crucial as it may be a sign of an insider being compromised or coerced. In the context of national security or corporate environments, this could lead to espionage, insider threats, and other forms of manipulation.
One should include an accurate description of their own role in the course of what occurred, reporting any incidents thoroughly and honestly. If physical force was used to detain someone involved, it's important to report how you handled the situation and its aftermath. This ensures transparency and allows for a proper assessment of the situation.
In cases where internal resolution proves difficult, it may be beneficial to bring in outside practitioners or consultants to speak more directly to the issues from a neutral or outsider vantage point. This can help facilitate a more objective resolution to the problem, ensuring an impartial approach to the situation.
Each Google My Business location has a unique ID that applies changes to the right listing.
What’s the name of this unique ID?
a. Store Number
b. Store Category
c. Store Code
d. Store Identifier
Answer:
The correct answer to the following question will be option c. Store Code.
Explanation:
A store code will be the unique ID which can uniquely identify any location of that store.
Any random number or name can be the store code. A store code in each Google My Business (GMB) will only be viewable to the person who is managing that locations arround the store.Any costumer doesn't have possibility to see it.Hence, Option C is the right answer.
A. When executing System.out.println(a1), the toString() method in the Object class is invoked.
B. When executing System.out.println(a2), the toString() method in the Object class is invoked
C. When executing System.out.println(a1), the toString() method in the A class is invoked.
D. The program cannot be compiled, because System.out.println(a1) is wrong and it should be replaced by System.out.println(a1.toString())
E. Both B and C.
This question is incomplete, it lacks a piece of code to analyze.
I think you wanted an answer to the following question:
Analyze the following code:
public class Test {
public static void main(String[] args) {
Object a1 = new A();
Object a2 = new Object();
System.out.println(a1);
System.out.println(a2);
}
}
class A {
int x;
@Override
public String toString() {
return "A's x is " + x;
}
}
A. When executing System.out.println(a1), the toString() method in the Object class is invoked.
B. When executing System.out.println(a2), the toString() method in the Object class is invoked
C. When executing System.out.println(a1), the toString() method in the A class is invoked.
D. The program cannot be compiled, because System.out.println(a1) is wrong and it should be replaced by System.out.println(a1.toString())
E. Both B and C.
Answer:
E. Both B and C.
Explanation:
toString() method is used to get the representation of this object as a string. When trying to display a string representation of an object usually the full name of the class will be displayed.
In the example above, line
System.out.println(a2);
would display something like
java.lang.Object@5ccd43c2
Obtained value can hardly serve as a good string description of an object. Therefore, toString() method is often overridden using @Override annotation (more info about @Override at https://beginnersbook.com/2014/07/override-annotation-in-java/)
Line
System.out.println(a1);
would display "A's x is 0" because it uses toString() method overridden in class A.
Fill in the code to complete the following method for sorting a list.
public static void sort(double[] list) {
________;
}
public static void sort(double[] list, int high) {
if (high > 1) {
// Find the largest number and its index
int indexOfMax = 0;
double max = list[0];
for (int i = 1; i <= high; i++) {
if (list[i]> max) {
max = list[i];indexOfMax = i;
}
}
// Swap the largest with the last number in the list
list[indexOfMax] = list[high];
list[high] = max;
// Sort the remaining list
sort(list, high - 1);
}
}
Answer:
sort(list,list.length-1);
Explanation:
The appropriate code to implement to sort the list in the given program is sort(list, list.length-1)
This is used for sorting every member of the list since indexing at Java starts from 0, hence the last member of the list will have the (n-1) position in sorting where n signifies the number pf members or list length in this instance.
2019 Altima’s Intelligent AWD system is designed to work in conjunction with _________.
Answer:
Vehicle Dynamic Control is the correct answer.
Explanation:
Vehicle Dynamic Control is that type of sensor in the vehicle which displays the motions of the vehicles to the driver. In other words, when the driver increase or decrease the speed of the vehicle then, it display on the speedometer and if the driver open and close the window of the vehicle by using the button. When the driver start or turn off the vehicle then the VDC system is also back on.
How much does the Teal Group estimate the aerial drone industry will be worth per year over the next decade?
a. $100 billion
b. $111.3 billion
c. $11.3 billion
d. $100 million
Answer:
$100 billion
Explanation:
Arial Drone industry is going to increase a lot more, and to a record level,which can be as high as $100 billion. And it is believed that a lot of better drones might be made in coming few years. And the prediction is that the usage of the drone is going to increase to a record level.
_____________ is an application development methodology with which developers create solutions by integrating one or more web services
Answer:
SOA (Service-oriented architecture)
Explanation:
SOA (Service-oriented architecture) is used to designing networks so that it works optimally in web services environment.
It allows achieving faster and quality environments with less cost. However they can be more complex than the other architectures.
SOA provides advantages in integrating processes and its usage is platform-independent.
What mobile operating system below requires all applications to be reviewed and approved before they can be made available in the App store?
Answer:
The correct answer to the following answer will be iOS.
Explanation:
The iOS formerly stands for iPhone Operating System, basically is a mobile operating system developed by Apple Inc. This edition mainly supports Apple devices such as iPhone, iPod touch, iPad, etc.
Just because of this iOS gives the improvement to the entire application and is one of the operating systems which requires all that applications to be approved before showing availability in the App stores.
So, iOS is the right answer.
Donna has been developing software for her company. She makes a copy of the directory where her code is stored each time she makes a significant change. However, the project she started years ago is now much larger and there are two other developers who also work on the program with her. She would like a way to better manage the code so that she can revert to previous states if necessary and track changes made by each person. Which technology would you suggest?
1. Continuous integration application
2. Code repository
3. Workflow automation
4. Chargebacks for each developer
Answer: (2) Code repository
Explanation:
The code repository is basically used for organizing the code branch by keeping the code consistent even the different types of teams are working in the similar specific place.
The code repository is basically providing the web hosting facilities to the web pages, code for the software and the various types of accessible documentation. The developers published code and can easily synchronized the local code copy to the repository.Therefore, Option (2) is correct.
Identify a text-level element used to mark generic run of text within the document.
Answer:
span label
Explanation:
The span label, we can use it to group text elements, this label doesn't generate a visual change, but we can organize changes in a text group.
This element works in a text level, if we use a CSS code, we can apply the change only in some text groups.
For example:
In this example with a paragraph, and we can stand out that text with the label span in color blue.
<p>Lorem ipsum dolor sit amet, consectetur adipiscing elit. Nunc vel condimentum erat. Cras ac pharetra risus, nec lobortis ante. Ut at turpis eu diam egestas malesuada. sit amet varius mi euismod ac. <span style="color:blue">Aenean facilisis ante sem, </span>Donec maximus orci ac diam hendrerit sollicitudin. Proin eu ipsum maximus, tempus tortor nec, iaculis odio.</p>
Play-e-ball, a company that creates games for gaming consoles, gathers data from the information systems of its partners, suppliers, and distributors. It uses this data along with internal data to develop different games for different consumer demographics, and it targets the most profitable segments. Which of the following is illustrated in this scenario?
A) customer relationship management systems
B) business intelligence
C) inventory management
D) virtual collaboration
Answer:
Option B
Explanation:
It is the perfect example of BI(Business Intelligence).
Which of the following is a legitimate responsibility of an organization regarding user private data?
A. Limit administrative access to personal information.
B. Keep personal information indefinitely.
C. Collect all user personal information.
D. Use proprietary methods for data collection to maintain security.
Answer:
D. Use proprietary methods for data collection to maintain security.
Explanation:
The legitimate responsibility of an organisation regarding user private data is to proprietary-tested method in data collection.
Which of the following is an advantage of installing a client/server network in a business?a. centralization of network adaptersb. sharing of peripheralsc. decentralization of files and datad. decentralization of peripherals
Answer:
Option(b) is the correct answer for the given question.
Explanation:
In the client-server network the client gives the request for accessing the particular resources to the server ,The server respond accordingly to the request of the client.
The advantages of a client/server network in business are given below:
Provides the facility of centralization means that all the files, documents are stored in a single central location which provides flexibility. The second and the most important advantages are we can easily share the peripherals i.e input and output device.Option(a),Option(c) and Option(d) are not the advantage of client/server network in a business.
So, Option(b) is the correct answer.
The advantage of installing a client/server network in a business includes sharing peripherals, which leads to cost savings and improved efficiency.
Explanation:One advantage of installing a client/server network in a business is the sharing of peripherals. This setup allows multiple clients (workstations) to access shared network resources, such as printers and scanners, which can lead to cost savings and efficiency improvements. Additionally, a client/server network often brings about the centralization of network management, simplifying tasks like data backup, virus scanning, and software updates.
A label control's __________ property determines whether the control automatically sizes to fit its current contents.
a. Fitb. TextAlignc. MiddleCenterd. AutoSize
Answer:
Option d (Auto Size) is the correct answer.
Explanation:
In a C# programming language, when a user needs to create a Windows Forms Label, then he needs to specify the property of label that how the label will look like and where the label fits and what is the size of that label. Following are the property which has a different meaning and a user need to specify when he creates a label--
Fit states that the label to fix in the size.Text align states that the item of the toolbar is fixed in the center.The Middle center states that the item is fixed in the middle.Auto Size helps that the size of the control can be automatically resized.The above question asked about that property which is used to automatically resize the control. So the answer is Auto size which is described above. Hence Option d is the correct answer while the other is not because--
Option a state about 'Fit' property which is used to fix the label size.Option b states about 'Text align' property which is used to fix items of the toolbar in the center.Option c states about 'Middle center' property which is used to fix the item in the middle.The label control's AutoSize property is responsible for determining if the control will automatically adjust its size to fit the text within. Other options such as Fit, TextAlign, or MiddleCenter do not control this aspect. The correct answer is 'd. AutoSize'.
Explanation:A label control's AutoSize property determines whether the control automatically sizes to fit its current contents. When the AutoSize property is set to true, the label will expand or shrink to accommodate the text it contains. However, if the property is set to false, the label will maintain a fixed size, regardless of its content. Neither Fit, TextAlign, nor MiddleCenter are properties that control this behavior, thus the correct answer to the question is d. AutoSize.
java syntax allows programmers to use any expression of thei nt data type as an array subscript1. True2. Flase
Answer:
The answer is "Option 1".
Explanation:
In java programming language, Subscript is a numerical value between [ and ] which indicates the index of the object of which you like. The special [ and ] signs indicate the notation of the mathematic abonnement. So, x[1 ] and x[n-1 ] are used by Java rather than x0, x1, and x-1. That's why the answer to this question is "True".
A modern information-processing model that views memories as emerging from particular activation patterns within neural networks is known as
Answer:
Connectionist Model
Explanation:
Connectionist model is the modern information processing model that views memories as emerging from particular activation patterns with in neural networks.
A favorable variance indicates that ________. A. actual operating income is less than the budgeted amount B. budgeted contribution margin is more than the actual amount C. actual revenues exceed budgeted revenues D. budgeted costs are less than actual costs.
Answer:
The answer is "Option C".
Explanation:
An undesirable change occurs when an actual net profit is below or below the level of performance predicted. It exists when total net profit is above what we expected or when income is below our average. In the given question the other options are not correct that can be described as follows:
In option A, Actual income shall not be less than the target In option B, The estimated margin must not be greater than the current amount. In option D, The expense estimate is lower than the actual cost.Which wildcard character replaces a single character in the command-line interface?
Answer:
? (the question mark)
Explanation:
The asterisk (*) matches one or more occurrences of any character, but the question mark matches exactly one.
which two functions of a firewalls in an enterprise network are true (choose two)
Answer:
A. They can use information about previous packets to make decisions about future packets.
E. They are more susceptible to DoS attacks than stateless firewalls
Explanation:
Assuming the following options:
A. They can use information about previous packets to make decisions about future packets.
B. They are most effective when placed in front of the router connected to the Internet
C. They can track the number of active TCP connections
D. They can fitter HTTP and HTTPS traffic in the inbound direction only
E. They are more susceptible to DoS attacks than stateless firewalls
A firewall by definition is a "software used to maintain the security of a private network. Firewalls block unauthorized access to or from private networks and are often employed to prevent unauthorized Web users or illicit software from gaining access to private networks connected to the Internet".
The basic purpose of a firewall is to control the traffic that is allowed to traverse from the internet.
Option A is correct since they use previous info in prder to make decisions about a site.
Option B is not true since the firewall is a software that not depends of the router connection to the internet, since the web is open for any IP.
Option C is not correct isnce the purpose for the firewalls is not analyze the acitve connections.
Option D is not correct since they can work in both directions and no present limitations in order to filter web pages to classify the info.
Option E is correct since one characteristic of the stateless firewalls compared to the stateful firewalls. Since "Stateless firewalls watch network traffic and restrict or block packets based on source and destination addresses or other static values" and present more security comaprd to the stateless stateful.
Final answer:
The correct options are A. They can use information about previous packets to make decisions about future packets and C. They can track the number of active TCP connections. Firewalls in an enterprise network can use information about previous packets and track the number of active TCP connections to enhance network security.
Explanation:
Two functions of firewalls in an enterprise network:
They can use information about previous packets to make decisions about future packets: Firewalls can track the state of connections and use this information to determine whether incoming packets are part of an established connection or if they are trying to initiate a new, potentially unauthorized connection.
They can track the number of active TCP connections: Firewalls can monitor the number of active Transmission Control Protocol (TCP) connections to ensure network resources are not overwhelmed by excessive connections or potential cyber threats.
Alex, a web designer, is assigned the task of creating a mobile-device-friendly website for a leading fashion outlet called AllStyles. A desktop version of AllStyles's website already exists. Alex can refer to this desktop version of the website to create the mobile website design.
For the AllStyles's main web page, Alex creates a navigation bar that includes topical areas named Clothing, Accessories, and About Us. Alex wants to create nested lists within each of these topical areas that would contain links to specific pages on the AllStyles website. In order to do so, Alex must _____ while writing the HTML code.
A. Set the width of the layout viewport to the width of the nested lists
B. Put each of the nested lists within a class
C. Insert the structure of the nested list within a specific style sheet structure
D. Use theonlykeyword to hide the list items
In order to do so, Alex must set the width of the layout viewport to the width of the nested lists while writing the HTML code.
A. Set the width of the layout viewport to the width of the nested lists
Explanation:
In mobile technology, a web browser displaying web pages has a mobile mode or desktop mode. While the end-user selects mobile mode it web pages displayed in compression mode and limit information depends on the web pages designer.
While select the desktop mode by the end-user web pages is displayed as the normal desktop version.
While the designer has to set the styles to all the web pages and it should be mapped properly so the web page display in both mode in the mobile technology.
Final answer:
Alex must use class or ID tags for the elements in the HTML code and style them with CSS, utilizing descendant selectors for nested lists to create a functional and styled navigation bar.
Explanation:
Alex, in creating nested lists for the navigation bar on the AllStyles mobile website, must ensure that the HTML and CSS code is written in a way that supports the hierarchical organization of menu items. One effective way to accomplish this is to assign class or ID tags to elements such as lists, which can then be styled using CSS. For instance, if Alex wants nested lists within the Clothing, Accessories, and About Us sections of the navigation bar, these lists can be organized by using <ul> tags for the main items and <li> tags for the nested items. Additionally, by making use of CSS descendant selectors, specific styles can be applied to lists within certain classes, aiding in the creation of a visually appealing and functional dropdown menu.
Many Web browsers allow users to open anonymous windows. During a browsing session in an anonymous window, the browser does not record a browsing history or a list of downloaded files. When the anonymous window is exited, cookies created during the session are deleted. Which of the following statements about browsing sessions in an anonymous window is true?
A. The activities of a user browsing in an anonymous window will not be visible to people who monitor the user's network, such as the system administrator.
B. Items placed in a Web store's shopping cart for future purchase during the anonymous browsing session will not be saved on the user's computer.
C. A user will not be able to log in to e-mail or social media accounts during the anonymous browsing session.
D. A user browsing in an anonymous window will be protected from viruses launched from any Web sites visited or files downloaded.
Answer:
Items placed in a Web store's shopping cart for future purchase during the anonymous browsing session will not be saved on the user's computer
Explanation:
Browsing ananymously implemented as In-private browsing by some web browsers allows you to browse without leaving histories and cookies, however your activities can still be monitored by an admin and you are not protected from malware because of in-private browsing. Because browsing histories are not saved, any data from a web store such as future purchase intention will also not be saved
Google's stated mission is to: establish itself as the most valuable media company in the world. organize the world's information and make it universally accessible and useful. pair Internet surfers with advertisers and earn revenue along the way. foster technological innovation to promote a knowledge-driven culture. make the world more open and connected.
Answer:
Yes this is true.
Explanation:
Dexter needs to monitor the movement of a rover vehicle on Mars for one year. Which technologies should Dexter use for tracking purposes? Check all that apply.
Answer:
satellites that collect information about rover vehicle distance
space stations that store real-time data about rover vehicle speed
computer simulations that model how long it takes the rover to get to mars
Explanation:
All of the above answers are correct. Satellites are used, and so are space stations. The computer simulations are also being used in bulk. However, the telescope is not that powerful to be used. And that explains the above choices, as they are the technologies that are being used.
Answer:
hi your question lacks the options here is the complete question
Dexter needs to monitor the movement of a rover vehicle on mars for one year. which technologies should Dexter use for tracking purposes? check all that apply.
telescopes that show where the rover vehicle is located
satellites that collect information about rover vehicle distance
space stations that store real-time data about rover vehicle speed
computer simulations that model how long it takes the rover to get to mars
Doppler radar that records information about weather the rover is exposed to
The answer is
Telescopes that show where the rover vehicle is locatedDoppler radar that records information about weather the rover is exposed tospace station that store real-time data about rover vehicle speedExplanation:
Rover vehicles have been successfully sent to Mars from four different laboratories which are named Sojourner,spirit, opportunity and curiosity the weather condition in Mars varies from the poles of Mars to the center of the Mars closest to the Equator. the poles are cooler while the center which is closest to the equator is very hot. Rover vehicles are robotic vehicles sent to mars by scientists to understudy the different parts which the Mars is made up of.
The recent Rover vehicle which is of a car size with four wheels is named Curiosity.
28. Which major NIMS Component describes recommended organizational structures for incident management at the operational and incident support levels?
Answer:
Command and Coordination .
Explanation:
Command and Coordination is the component of NIMS that explains leadership roles, processes and prescribed authoritative and organizational structures for incident management at operational and incident support levels. It also describes how these structures interconnect to handle incidents proficiently. In a nut shell command and coordination provides with systems, rules, standards and principles for standard framework for incident management. It comprises of 4 areas. First includes tactical activities to put in resources on scene. Second includes incident support which is managed at Emergency operations centers via operational coordination, resource procurement and data collection and sharing. Third is the policy advice and senior level decision making. Fourth is the outreach and interaction media for keeping them updated about the incident.
Which of the following is the net effect of the following combination of share and NTFS permissions when the share is accessed over the network?•Share permission (Share tab)-Sales group: Full Control•NTFS permission (Security tab)-Sales group: Read & Execute, Modify, Writea. Members of the Sales group will be able to take ownership of files and edit content, but not delete files.b. Members of the Sales group will be able to edit content and delete files.c. Members of the Sales group will be able to take ownership of files, edit content, and change NTFS permissions.d. Members of the Sales group will be able to edit content, delete files, and change NTFS permissions.
Answer:
Members of the Sales group will be able to edit content and delete files.
Explanation:
NTFS (New Technology File System) is the standard file system for Microsoft Windows NT and later operating systems; NTFS permissions are used to manage access to data stored in NTFS file systems.
Share permissions manage access to folders shared over a network; they don’t apply to users who log on locally.
The share permission is applicable in this question.
On the security tab, where the sales group have read & execute, modify and write permission will allow the sales group users to
1. Modify: allows you to read, write, modify, and execute files in the folder, and change attributes of the folder or files within
2. Read and Execute: will allow you to display the folder's contents and display the data, attributes, owner, and permissions for files within the folder, and run files within the folder
The _______________ is a priority-ordered list of the other carrier networks and frequencies it should search for when it cannot locate its home carrier's network.
Answer:
The correct answer to the following question will be Preferred Roaming List (PRL).
Explanation:
A type of database be placed in any wireless device (used in CDMA mobile phones), that contain some information during the selection process of the system, termed as Preferred Roaming List (PRL).
It is used when your phone is connected to the network tower, provided and built by your carrier networks.
Hence, PRL is the correct answer.
Which of the following statements correctly instantiate the Rectangle object myRectangle? (i) myRectangle Rectangle = new Rectangle(10, 12); (ii) class Rectangle myRectangle = new Rectangle(10, 12); (iii) Rectangle myRectangle = new Rectangle(10, 12);
Answer:
The answer is "option iii" .
Explanation:
In the given question it is defined that a class "Rectangle" is defined in the class a parameter constructor is created that accepts two parameters. In this question, we create an instance of the class. In object creation first, we define class name then object name and use new keyword in the Instance of class and pass parameters.
In option i), An object name is used first and then class name. It is not correct. In option ii), In instance creation of the class, we do not use class keyword that's why it is wrong.