HELP FAST PLEASE!!!!!Number the steps from when a stimulus is received to when the body reacts. The stimulus is received by sensory receptors. Motor neurons cause muscles to contract so the body can react to the stimulus. The brain processes the information through interneurons. Interneurons transfer response information to motor neurons. Sensory neurons carry stimulus information to the brain or spinal cord.

Answer: The final temperature in Kelvin is 1488

Explanation:

To calculate the final temperature of the system, we use the equation given by Gay-Lussac Law. This law states that pressure of the gas is directly proportional to the temperature of the gas at constant pressure.

Mathematically,

[tex]\frac{P_1}{T_1}=\frac{P_2}{T_2}[/tex]

where,

[tex]P_1\text{ and }T_1[/tex] are the initial pressure and temperature of the gas.

[tex]P_2\text{ and }T_2[/tex] are the final pressure and temperature of the gas.

We are given:

[tex]P_1=0.89atm\\T_1=35^0C=(35+273)K=308K\\P_2=4.3atm\\T_2=?[/tex]

Putting values in above equation, we get:

[tex]\frac{0.89}{308}=\frac{4.3}{T_2}\\\\T_2=1488K[/tex]

Hence, the final temperature in Kelvin is 1488

Answer:

A GALAXY WIITH I YHINK MANY

Explanation:

Answer:

670.68°C

Explanation:

Given that:

volume of water = 50 ml but 1 g = 1 ml. Therefore the mass of water (m) = 50 ml × 1 g / ml = 50 g

specific heat (C) = 4.184 J/g˚C

Initial temperature = 20°C, final temperature = 22°C. Therefore the temperature change ΔT = final temperature - initial temperature = 22 - 20 = 2°C

The quantity of heat (Q) used to raise the temperature of a body is given by the equation:

Q = mCΔT

Substituting values:

Q = 50 g × 4.184 J/g˚C × 2°C = 418.4 J

Since the mass of lead = 5 g and specific heat = 0.129 J/g˚C. The heat used to raise the temperature of water is the same heat used to raise the temperature of lead.

-Q = mCΔT

-418.4 J = 5 g × 0.129 J/g˚C × ΔT

ΔT = -418.4 J / ( 5 g × 0.129 J/g˚C) = -648 .68°C

temperature change ΔT = final temperature - initial temperature

- 648 .68°C = 22°C - Initial Temperature

Initial Temperature = 22 + 648.68 = 670.68°C

Answer:

Explanation:

a) Hydronium ion (H₃O⁺) is the acidic ion, after reacting with a base Calcium hydroxide the pH decreased. The base contained a hydroxide ion (OH⁻) which reacted with the Hydronium ion causing the decrease of hydronium ion.

b) The base which is Calcium hydroxide is made up of Calcium ion (Ca²⁺) and hydroxide ion (OH⁻) which reacts to form Calcium hydroxide [Ca(OH)₂]

Ca²⁺    +       OH⁻     ⇒    Ca(OH)₂

a. The reason of ion that resulted into the decrease of the hydronium ion should be explained below.

b. The formula is Ca²⁺    +       OH⁻     ⇒    Ca(OH)₂.

a) Hydronium ion (H₃O⁺) represent the acidic ion that should be reacted along with the base i.e.  Calcium hydroxide when there should be decrease in the pH. Here the base should comprise of the hydroxide ion (OH⁻) that should be reacted with the Hydronium ion.

b. The formula should be

we know that

The base should be based on Calcium hydroxide comprise of Calcium ion (Ca²⁺) and hydroxide ion (OH⁻)

So, it should be like

Ca²⁺    +       OH⁻     ⇒    Ca(OH)₂

learn more about ph here: https://brainly.com/question/12958140?referrer=searchResults

Answer:

The reason why scientists are concerned about the amount of CO2 released into the atmosphere by burning fossil fuels is because CO2 is a greenhouse gas.

Explanation:

Greenhouse gases help keep the Earth warm. They trap infrared radiation, or heat energy. This makes them useful at certain levels; but if there is too much of them, they will cause global warming rates to increase, melting ice packs, thereby causing rising sea levels. Rising sea levels are a major threat tp humanity right now. New projections and satellite readings suggest that more than 150 million people's homes will be submerged by 2050, with some cities even being completely submerged. Other than rising sea levels, excessive amounts of greenhouse gases also cause loss of biodiversity, changes in wildlife behavior, and shifts in periodic biological phenomena.

Answer:

The atmosphere has a limited capacity to absorb and recycle carbon naturally.

Explanation:

The carbon cycle tends to recycle carbon—moving it in and out of the atmosphere—at certain rates. If too much carbon is released into the atmosphere, this carbon will surpass the cycle's ability to remove it. This will result in the amount of carbon in the atmosphere increasing.

Answer: 120 grams of HF are needed to react with 3.0 moles of Sn

Explanation:

The balanced chemical equation is :

[tex]SnF_2+H_2\rightarrow Sn+2HF[/tex]

According to stoichiometry:

1 mole of [tex]Sn[/tex] reacts with 2 moles of HF

Thus 3.0 moles of Sn will react = [tex]\frac{2}{1}\times 3.0=6.0[/tex] moles of HF

Mass of [tex]HF=moles\times {\text {molar mass}}=6.0mol\times 20.01g/mol=120g[/tex]

Thus 120 grams of HF are needed to react with 3.0 moles of Sn

Answer:

Fossil fuel

Explanation:

Fossil fuel is defined as deposits of organic materials. It is usually formed from decayed plants and animals which has been converted to crude oil, coal, natural gas, or heavy oils due to exposure to heat and pressure over a very long period of time which ranges between hundreds of millions of years.

Fossil fuels are the major sources non renewable energy which is used in the generation of electricity.

Answer:

-112°C

Explanation:

Given,

Pressure, P = 971 mmHg

moles of carbon dioxide = 3.3

Temperature, T = ?

Volume = 34.13 L

Pressure in atm = [tex]\dfrac{971}{760} = 1.278\ atm[/tex]

Now, using ideal gas equation

PV = n RT

1.278 x 34.13 =3.3 x 0.08206 x T

T = 161.07 K

Temperature in °C = 161.07-273 = -112°C

Temperature of sample is  -112°C.

Answer:

A and B

Explanation:

This is because there was emission of gamma (Y) radiations in both the reactions.

Answer:

32.4 grams of K3N will be produced

Explanation:

Step 1: Data given

Mass of potassium = 29.0 grams

Mass of barium nitride = 66.5 grams

Atomic mass of potassium = 39.10 g/mol

Molar mass of barium nitride = 440 g/mol

Step 2: The balanced equation

6K + Ba3N2 → 2K3N + 3Ba

Step 3: Calculate moles

Moles = mass / molar mass

Moles K = 29.0 grams / 39.10 g/mol

Moles K = 0.742 moles

Moles Ba3N2 = 66.5 grams / 440 g/mol

Moles Ba3N2 = 0.151 moles

Step 4: Calculate the limiting reactant

For 6 moles K we need 1 mol Ba3N2 to produce 2 moles K3N and 3 moles Ba

K is the limiting reactant. It will completely be consumed (0.742 moles). Ba3N2 is in excess. There will react 0.742/ 6 = 0.124 moles

There will remain 0.151 - 0.124 = 0.027 moles

Step 5: Calculate moles K3N

For 6 moles K we need 1 mol Ba3N2 to produce 2 moles K3N and 3 moles Ba

For 0.742 moles K we'll have 0.742/3 = 0.247 moles K3N

Step 6: Calculate mass K3N

Mass K3N = moles K3N * molar mass K3N

Mass K3N = 0.247 moles * 131.3 g/mol

Mass K3N = 32.4 grams

32.4 grams of K3N will be produced

The question contains a chemical inconsistency regarding potassium nitride. Instead, we reviewed typical precipitation and double displacement reactions where the mass of products and excess reactants are calculated using the principle of limiting reactants and stoichiometry.

The question asks for the mass of potassium nitride produced when potassium reacts with barium nitride. However, this appears to be an error because potassium nitride is not a common compound, and the reaction given is not between potassium and barium nitride. Instead, we can examine a more typical reaction based on the provided examples, which involve precipitation and double displacement reactions.

For the reaction Pb(NO3)2 (aq) + 2 KI (aq) → PbI2 (s) + 2 KNO3 (aq), the limiting reactant principle is applied, whereby the reactant that produces the least amount of product is the limiting reactant. To calculate this, one would first determine the number of moles of each reactant using their respective molar masses, then apply the stoichiometric ratios from the balanced equation.

Similarly, to find out the excess reactant and the mass of products in other reactions such as the reaction between KOH and HNO3, you would apply the same principles to arrive at the desired masses.

Answer:

1.66 atm

Explanation:

P1V1/T1 = P2V2/T2

1.00atm*30.0mL/273K= P2*20.0 mL/303K

P2 = (1.00*30.0*303)/(273*20.0) = 1.66 atm

Answer:

C: C3CI9

Explanation:

Binary Molecular compound states that the molecular formula for tricarbon nonacholride is C3CI9

Hope this helps

Answer:

C

Explanation:

Think about the prefixes to solve this. I've attached a Latin prefix chart. It might help to memorize this!

Tri- carbon means 3 carbons.

Nona- chloride means 9 chlorines.

So the answer is C₃Cl₉.

The reason we use these prefixes is because it's a covalent compound. If it's ionic, we don't need to use the tri- or nona- parts of it.

Answer: [tex]Na[/tex] is in excess.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} Cl_2=\frac{20.5g}{71g/mol}=0.29mol[/tex]

[tex]\text{Moles of} Na=\frac{20.5g}{23g/mol}=0.89moles[/tex]

[tex]2Na(s)+Cl_2(g)\rightarrow 2NaCl(s)[/tex]

According to stoichiometry :

1 mole of [tex]Cl_2[/tex]  require 2 moles of [tex]Na[/tex]

Thus 0.29 moles of [tex]Cl_2[/tex] will require=[tex]\frac{2}{1}\times 0.29=0.58moles[/tex] of [tex]Na[/tex]

Thus [tex]Cl_2[/tex] is the limiting reagent as it limits the formation of product and [tex]Na[/tex] is the excess reagent.

Answer:

P2 = 1250mmHg

Explanation:

V1 = 5.0L

P1 = 750mmHg

V2 = 3.0L

P2 = ?

According to Boyle's law, the volume of a fixed mass of gas is inversely proportional to its pressure provided that temperature remains constant.

P = k/V k = P*V

P1*V1 = P2*V2 = P3*V3 =........=Pn*Vn

P1 *V1 = P2 * V2

Solve for P2

P2 = (P1 * V1) / V2

P2 = (750 * 5.0) / 3.0

P2 = 3750 / 3

P2 = 1250mmHg

The final pressure of the gas is 1250mmHg

Answer:

It indicates it is a suspension b/c in a suspension heavy particles separate or fall and the ingredie-nts would need to be mixed after sinking.

and for the milk one I'm not sure but I think when u shake milk well it may change into a butter.

Because some of the larger particles in a suspension will eventually settle out.

Suspensions are defined as a mixture that is heterogeneous, meaning the solid particles are dispersed throughout the liquid without really dissolving in it. The friction between the tires of your car and the pavement is increased by suspension systems. It is possible to steer your car more steadily and enjoy more comfortable handling by increasing friction. You can drive more securely and safely the more contact your tires have with the road.

The fact that the ingredients would need to be mixed after sinking suggests that it is a suspension. For the milk one, I'm not sure, but I believe that when milk is shaken thoroughly, it may transform into butter.

Thus, because some of the larger particles in a suspension will eventually settle out.

To learn more about suspensions, refer to the link below:

https://brainly.com/question/17650174

#SPJ2

Answer:

The final volume is 18.38 L.

Explanation:

It is given that,

A container is filled with 13.3 L of gas at 1.41 atm. The container is held at constant temperature throughout the experiment if the pressure changes to 1.02 atm.

It is based on Boyle's law. According to this law, at constant temperature,

[tex]PV=K[/tex]

K is constant

[tex]P_1V_1=P_2V_2[/tex]

[tex]V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{13.3\times 1.41}{1.02}\\\\V_2=18.38\ L[/tex]

So, the final volume is 18.38 L.

Answer:

70g

Explanation:

2*40 of cawill require 112g of cao

50g of ca will require

Ans=70g of cao

The system will shift towards the reactant's side.

A chemical formula showing the simplest ratio of elements in a compound rather than the total number of atoms in the molecule

[tex]PCl_5[/tex] (g) is removed. As [tex]PCl_5[/tex] (g) is removed/concentration decreases, the equilibrium will shift to oppose the change.  

According to principle when the concentration of reactant decreases, the equilibrium shift towards the reactant side.

Hence, equilibrium will shift towards reactants.

Learn more about the empirical formula here:

https://brainly.com/question/14044066

#SPJ2

Final answer:

If PCl5 is removed from the equilibrium PCl5(g) = PCl3(g) + Cl2(g), the equilibrium will shift to the left to replace the removed PCl5, according to Le Châtelier's Principle.

Explanation:

Using the equation PCl5(g) = PCl3(g) + Cl2(g), if PCl5 is removed, the equilibrium will shift toward the left to replace the removed PCl5. This is because, according to Le Châtelier's Principle, when a component of a reaction at equilibrium is removed, the equilibrium will shift in the direction that tends to replace that component. In this reaction, removing PCl5 decreases its concentration, thus the system shifts left to increase its concentration by converting PCl3 and Cl2 back into PCl5.

To find the number of atoms present in 55 grams of iron, we need to convert grams to moles and then use Avogadro's number to convert moles to atoms.

To find the number of atoms present in 55 grams of iron, we need to convert grams to moles and then use Avogadro's number to convert moles to atoms. The molar mass of iron is 55.8 g/mol. Therefore, 55 grams of iron is equal to:

55 g / 55.8 g/mol = 0.986 moles of iron.

Since 1 mole of any substance contains Avogadro's number (6.022 x 10^23) of particles, the number of atoms in 0.986 moles of iron is:

0.986 mol x (6.022 x 10^23 atoms/mol) = 5.93 x 10^23 atoms of iron.

https://brainly.com/question/12898212

#SPJ3

There are [tex]$\boxed{1.20 \times 10^{24}}$[/tex] atoms of iron present in 55 grams of iron.

To determine the number of atoms in 55 grams of iron, we follow these steps:

1. First, we need to know the molar mass of iron. The molar mass of iron (Fe) is approximately 55.845 grams per mole.

2. Next, we use Avogadro's number, which is [tex]$6.022 \times 10^{23}$[/tex] atoms per mole, to find the number of atoms in one mole of iron.

3. Now, we calculate the number of moles in 55 grams of iron by dividing the mass of iron by its molar mass:

[tex]\[ \text{moles of iron} = \frac{\text{mass of iron}}{\text{molar mass of iron}} = \frac{55 \text{ g}}{55.845 \text{ g/mol}} \approx 1 \text{ mol} \][/tex]

4. Finally, we multiply the number of moles by Avogadro's number to find the total number of atoms:

[tex]\[ \text{number of atoms} = \text{moles of iron} \times \text{Avogadro's number} \] \[ \text{number of atoms} \approx 1 \text{ mol} \times 6.022 \times 10^{23} \text{ atoms/mol} \] \[ \text{number of atoms} \approx 6.022 \times 10^{23} \text{ atoms} \][/tex]

Since we have approximately 1 mole of iron, the number of atoms is approximately equal to Avogadro's number. Therefore, there are approximately [tex]$1.20 \times 10^{24}$[/tex] atoms of iron in 55 grams of iron, considering the minor rounding in the molar mass.

Answer:

  B. NO

Explanation:

In each mole of NO, the weight of the oxygen is 16.00 g; the weight of the nitrogen is 14.01 g. Then in 80 g of NO, we have 42.65 g of oxygen and 37.35 g of nitrogen.

__

In each mole of NO₂, the weight of the oxygen is 2(16.00) = 32 g. The weight of the nitrogen is 1(14.01) = 14.01 g.

From the available oxygen, we can produce ...

 (42.65 g +16 g)/(32.00 g/mol) = 1.83 mol of NO₂

From the available nitrogen, we can produce ...

 (37.35 g)/(14.01 g/mol) = 2.67 mol of NO₂

Clearly, the reaction is limited by the amount of available oxygen.

NO is the excess reactant.

__

Read more at ...

https://brainly.com/question/16500145

Answer:

C B A D

Explanation:

1. A) Products that start a new reaction are released.

2. C) liquid sodium or water

3. C) fusion

4. B) It speeds up the reaction.

1. In a chain reaction, the products of one reaction are capable of initiating further reactions. Specifically, in a nuclear chain reaction, the fission of a heavy nucleus (such as uranium-235) releases neutrons, which can then go on to cause the fission of other nuclei. This is a self-sustaining series of reactions where the products (neutrons) start new reactions. Hence, option A is correct.

 2. Nuclear reactors can use different types of coolants to transfer the heat generated by the nuclear reactions to the turbines or to the environment. The most common coolants are water (in light-water reactors) and liquid sodium (in fast-breeder reactors). Therefore, option C, which states  liquid sodium or water,  is the correct answer.

 3. A reaction where smaller atomic nuclei combine to form a heavier nucleus is known as fusion. This is different from fission, which is the splitting of a heavy nucleus into smaller nuclei. Chemical reactions involve the rearrangement of electrons in atoms or molecules, not the combining or splitting of atomic nuclei. Ionization is the process of adding or removing charged particles to or from an atom or molecule, but it does not involve the combining or splitting of nuclei. Thus, the correct answer is option C, fusion.

 4. Neutron absorption is a critical part of the operation of a nuclear reactor. When a neutron is absorbed by a fissile nucleus (like uranium-235), it can cause that nucleus to become unstable and split, releasing energy and more neutrons. This process is what sustains the chain reaction in a nuclear reactor. The absorption of neutrons by fissile material effectively speeds up the reaction by increasing the rate of fission events. Therefore, option B,  It speeds up the reaction,  is the correct answer."

The concentration of H3O+ in rainwater with a pH of 4.35 is approximately 3.548 x 10^(-5) M.

The concentration of H3O+ in rainwater with a pH of 4.35 can be calculated using the equation pH = -log[H3O+]. Rearranging the equation to solve for [H3O+], we have [H3O+] = 10^(-pH). Substituting the given pH value into the equation, we find that the [H3O+] concentration is approximately 3.548 x 10^(-5) M.

https://brainly.com/question/33423889

#SPJ12

Answer:

Jet streams are fast flowing, narrow, meandering air currents in the atmospheres of some planets, including Earth

Explanation:

Answer: I hoped this helped, all I had to do was Google it though

Answer:

This has to do with the charge. The charge of K is +1. The charge of Cl is -1. I like to use a method called the criss cross method. So K+1 and Cl-1. I give each number to the other atom. (the "1" in Cl-1 goes to K the "1" in K+1 goes to Cl) so it becomes K1Cl1 which is KCl. Oxygen has a charge of 2-, so the 2 goes to the K and the 1 in K goes to the O, so it becomes K2O. Dm me if you want further explanation.

Explanation:

Final answer:

Potassium chloride consists of potassium and chloride ions, each with a 1+ and 1- charge, respectively, forming the formula KCl. Potassium oxide requires two potassium ions to balance the 2- charge of the oxide ion, resulting in the formula K₂O.

Explanation:

The reason why potassium chloride has the formula KCl but potassium oxide has the formula K₂O is based on the charges of the ions each metal and nonmetal forms. Potassium (K) forms a cation with a 1+ charge, while chloride (Cl) forms an anion with a 1- charge. To balance the charges, one potassium ion will pair with one chloride ion, resulting in the formula KCl, which has a neutral overall charge.

On the other hand, oxygen (O) forms an oxide anion with a 2- charge. To balance the charges, two potassium ions with a 1+ charge each are needed for every one oxide ion. This results in the chemical formula K₂O, as the two potassium ions balance out the charge of the one oxide ion, making the overall compound electrically neutral.

The reaction quotient, Qsp, for calcium fluoride when 125.0 mL of a 0.00615 M solution of Ca(NO3)2 is added to 330.0 mL of a 0.00615 M solution of KF is 0.000034 M^3.

The question requires the calculation of the reaction quotient, Qsp, for calcium fluoride (CaF2) which is the indexing of a point in time during the reaction. The formula for this reaction is [Ca+]^n [F-]^m. Given that we are mixing a 125.0 mL of 0.00615 M solution of calcium nitrate (Ca(NO3)2) with a 330.0 mL of 0.00615 M solution of potassium fluoride (KF), we have to first calculate the volume of the total solution which becomes 125+330 = 455 mL or 0.455 L. The concentrations of Ca^2+ and F^- are given by the molarity of the Ca(NO3)2 and KF solutions respectively. Thus, Qsp = [Ca^2+]{2}[F^-]{2}.

Here, [Ca2+] = [0.00615 M *(125/455)] = 0.0017 M and [F-] = [0.00615 M *(330/455)] = 0.0045 M. Qsp = (0.0017)(0.0045)^2 = 0.000034 M^3. So, the reaction quotient, Qsp, for calcium fluoride (CaF2) equals 0.000034.

https://brainly.com/question/36629312

#SPJ12

The Qsp of calcium fluoride when 125.0 mL of a 0.00615 M solution of Ca(NO3)2 is added to 330.0 mL of a 0.00615 M solution of KF is calculated to be 3.47 x 10^-11 by first finding the molarity of each ion in the solution and then using these molarity values in the equation for Qsp.

First, we find the total volume of the mixture which is 455.0 mL (125.0 mL + 330.0 mL). To find the molarity of each ion, we divide the moles of each ion by the total volume. Given that each ion comes from a 0.00615 M solution, the moles of each ion (Ca²+ and F¯) are (0.00615 mol/L)(0.125 L) and (0.00615 mol/L)(0.33 L) respectively. The molarity of these ions then comes out to be 0.00170 M for Ca²+ and 0.00451 M for F¯.

Next, we obtain the Qsp which is calculated similar to Ksp by multiplying the concentrations of the dissolved ions raised to their stoichiometric coefficients. However, unlike Ksp, the ion concentrations are not necessarily equilibrium values. For calcium fluoride, CaF2, it dissolves into one Ca²+ ion and two F¯ ions. So, Qsp = [Ca²+][F¯]² = (0.00170)(0.00451)² = 3.47 x 10^-11.

https://brainly.com/question/31084934

#SPJ11

Answer:

C. Metallic bonding

Explanation:

Answer:

The work done is 2,907 J

Explanation:

Work is one of the forms of energy transmission between bodies. To perform a job, you must exert a force on a body and it moves. In other words, when a force is applied to a body and it moves, work is done.

The work is equal to the product of the force by the distance and by the cosine of the angle that exists between the direction of the force and the direction that the moving point or object travels:

W = F * d * cos α

In the International System of Units the Force is expressed in newtons and the distance in meters, so the work will have units of newtons. Meter = joules (J).

In this case:

Replacing:

W= 255 N* 11.4 m* cos 0

Solving:

W= 255 N* 11.4 m* 1

W= 2,907 J

The work done is 2,907 J

The work done by the sailor is 2907 joules (J).

To calculate the work done by the sailor, we can use the formula for work:

[tex]\[\text{Work} = \text{Force} \times \text{Distance} \times \cos(\theta)\][/tex]

where:

- [tex]\(\text{Force}\)[/tex] is the force exerted by the sailor,

- [tex]\(\text{Distance}\)[/tex] is the distance over which the force is applied,

- [tex]\(\theta\)[/tex] is the angle between the force and the direction of movement.

If the force is applied in the direction of the movement, [tex]\(\theta = 0\)[/tex] degrees and [tex]\(\cos(0) = 1\)[/tex].

Given:

- [tex]\(\text{Force} = 255 \, \text{N}\)[/tex]

- [tex]\(\text{Distance} = 11.4 \, \text{m}\)[/tex]

- [tex]\(\theta = 0\)[/tex] degrees (assuming the force is in the direction of the movement)

Substitute these values into the formula:

[tex]\[\text{Work} = 255 \, \text{N} \times 11.4 \, \text{m} \times \cos(0)\][/tex]

[tex]\[\text{Work} = 255 \, \text{N} \times 11.4 \, \text{m} \times 1\][/tex]

[tex]\[\text{Work} = 2907 \, \text{J}\][/tex]

Final answer:

The stapedius muscle stabilizes the stapes bone in the ear, the sartorius aids in hip and knee movements, and the gluteus maximus extends the femur at the hip joint.

Explanation:

The muscles mentioned each have specific functions:

The intrinsic skeletal muscles of the back and neck, along with the muscles of the abdominal wall and thorax, help maintain posture, facilitate movement, and stabilize different parts of the body's trunk.

Answer:

10.15

Explanation:

14-3.85=pOH

- Hope that helps! Please let me know if you need further explanation.