How much sugar will dissolve in 1000 g of water at 80°c?

The empirical formula of the compound is CH5O after dividing the molar amounts of carbon, hydrogen, and oxygen by the smallest molar amount and adjusting to get whole numbers.

To calculate the empirical formula of the compound, we first need to find the molar amounts of each element based on their given masses. For carbon (C), we divide 330 g by its molar mass of 12.01 g/mol, which gives us 27.48 mol. For hydrogen (H), 69.5 g divided by 1.008 g/mol gives us 68.95 mol. For oxygen (O), 440.4 g divided by 16.00 g/mol gives us 27.53 mol. Next, we divide each molar amount by the smallest molar amount to get the simplest whole number ratio.

The smallest molar amount is 27.48 mol (for carbon), so we divide each element's molar amount by 27.48 mol. The resulting ratios are 1 for carbon, approximately 2.51 for hydrogen, and 1 for oxygen. The closest whole number ratio would then be interpreted as a 1:2.51:1 ratio, which we can approximate as 1:2.5:1. To convert it into whole numbers, we can multiply all the numbers by 2 to get the empirical formula C1H5O1, or simply CH5O.

Final answer:

By calculating the number of moles of carbon, hydrogen, and oxygen from the given masses and finding their simplest whole number ratio, the empirical formula of the compound is determined to be C₂H₅O₂.

Explanation:

Calculating the Empirical Formula:

To find the empirical formula of the compound, we need to convert the given masses of carbon (C), hydrogen (H), and oxygen (O) to moles. This is done by dividing the mass of each element by its respective atomic weight. The atomic weights of C, H, and O are 12.01 g/mol, 1.008 g/mol, and 16.00 g/mol, respectively. Hence, the number of moles of each element can be calculated as follows:

Next, we determine the simplest whole number ratio of the moles of each element by dividing each value by the smallest number of moles calculated:

To convert these ratios to whole numbers, we can multiply each ratio by a common factor that converts the smallest decimal (in this case, the ratio of hydrogen) into a whole number, which is approximately 2 in this case. This gives us whole number ratios of:

Therefore, the empirical formula of the compound is C₂H₅O₂ .

The statement given is True. The connectors marked with AL-Cu can be used with copper, copper clad cadmium and aluminum conductors.

Connectors are used to perform different functions that is to connect or disconnect the path of an electric current.

Wire connectors which are used to connect copper-clad aluminum conductors to copper conductors should be rated for copper and aluminum (“CUAL” or “AL-CU”) connections or rated for copper to aluminum, intermixed (terminated in the same twist-on connector), and in direct physical contact.

CU is used with copper only, AL with aluminum wire only, AL-CU can be used with aluminum, copper and, copper-clad cadmium.

Hence, the answer is true. The connectors marked with AL-Cu can be used with copper, copper clad cadmium and aluminum conductors.

To know more about connectors :

https://brainly.com/question/32217034

#SPJ12

An 'AL-CU' designation on a connector signifies that it is safe for use with copper, copper-clad aluminum, and aluminum conductors. These connectors are essential for effective conductivity in a variety of electrical systems.

Yes, a connector marked with 'AL-CU' is indeed suitable for use with copper, copper-clad aluminum, and aluminum conductors. This designation means that the connector has been specifically designed and tested for safe use with these types of electrical conductors. These connectors ensure safe and effective conductivity and are, therefore, vital components in many electrical appliances and systems.

https://brainly.com/question/5810195

#SPJ12

Great conductor of heat and electricity: Barium

Malleable and highly reactive: Potassium

Has properties of both metals and nonmetals: Boron

Nonreactive gas: Neon

For more information about the elements of the periodic table, refer to the link:

https://brainly.com/question/2287110

Potassium is a metal that is a great conductor of heat and electricity. Barium is a highly reactive metal. Boron is a metalloid with properties of both metals and nonmetals. Neon is a nonreactive gas.

Potassium is a great conductor of heat and electricity, making it a metal. Barium is an element that is shiny, malleable, and highly reactive, also a metal. Boron is a metalloid, which means it has properties of both metals and nonmetals. Neon is a nonreactive gas.

Potassium is best matched with 'Malleable and highly reactive', Barium with 'Great conductor of heat and electricity', Boron with 'Has properties of both metals and nonmetals', and Neon with 'Nonreactive gas'.

First let us calculate for the number of moles needed:

moles NaOH = 0.125 M * 0.500 L = 0.0625 mol

The molar mass of NaOH is 40 g/mol, hence the mass is:

mass NaOH = 0.0625 mol * 40 g/mol

mass NaOH = 2.5 grams

To prepare the solution of  500 ml of 0.125 m NaOH, the mass of 2.5 g of sodium hydroxide is required.

The concentration of the solution can be calculated if we have the molecular formula and molecular weight. We can easily calculate the concentration of a substance in a solution.

The molarity of a solution can be determined from the number of moles of a solute in a liter of a solution.

The Molarity of the solution is determined in the following way.

Molarity (M) = Moles of solute (n)/Volume of the Solution ( in L)

Given, the molarity of NaOH solution = 0.125 M

The volume of the NaOH solution, V = 500 ml = 0.5 L

The number of moles of NaOH = 0.125 × 0.5 = 0.0625 mol

The mass of the NaOH is required = 0.0625 ×40 =2.5 g

Therefore, 2.5 grams of NaOH are needed to prepare 500 ml of 0.125 m NaOH.

Learn more about molarity, here:

brainly.com/question/8732513

#SPJ2

Fluorine (F) is the most reactive among the elements listed. It is part of the halogen group (Group 17) and is the most reactive nonmetal due to its high electronegativity.

Among the given elements, Fluorine (F) is the most reactive. Reactivity varies across the periodic table, but generally, elements in the same group (vertical column) have similar chemical characteristics. Fluorine sits in Group 17 and is the lightest member of the halogen group which makes it the most reactive nonmetal, because it has the greatest electronegativity of all the elements and thus is very eager to gain an extra electron. Compare that to Arsenic (As), Sulfur (S), and Carbon (C) which are significantly less reactive than Fluorine.

https://brainly.com/question/11354664

#SPJ2

The chemical reaction that requires 31.39 kilojoules equate to approximately 7.5 kilocalories, as 1 kilocalorie equals approximately 4.184 kilojoules.

To convert kilojoules to kilocalories, you need to use the conversion factor of 1 kilocalorie equals approximately 4.184 kilojoules. Therefore, to find the equivalent in kilocalories for 31.39 kilojoules, you divide 31.39 by 4.184.

So, the calculation will be 31.39 kJ / 4.184 kcal/kJ = ~7.5 kcal. Hence, the chemical reaction that requires 31.39 kj is equivalent to about 7.5 kilocalories.

https://brainly.com/question/20458806

#SPJ11

Answer:

B

Explanation:

Number of protons in the atomic nucleus

The number of protons in the atomic nucleus  is the best one to use for identification of an element. Therefore, the correct option is option B.

An element is a chemical compound which can be changed into another chemical component. The amount of protons in the atoms' nucleus, the basic building block of a chemical element, allows us to distinguish between different chemical elements.

Most of the baryonic material in the universe is composed of chemical components. When different elements undergo chemical reactions, particles get rearranged into new compounds that are held together by chemical bonds. The number of protons in the atomic nucleus  is the best one to use for identification of an element.

Therefore, the correct option is option B.

To know more about an element, here:

https://brainly.com/question/29545466

#SPJ7

Answer:

(a) [tex]102.6g/mol[/tex]

(b) Rubidium

Explanation:

Hello,

This titration is carried out by assuming that the volume of base doesn't have a significant change when the mass is added, thus, we state the following data a apply the down below formula to compute the molarity of the base solution:

[tex]V_{base}=0.1L; M_{acid}=2.5M, V_{acid}=0.017L\\V_{base}M_{base}=V_{acid}M_{acid}[/tex]

Solving for the molarity of base we've got:

[tex]M_{base}=\frac{M_{acid}*V_{acid}}{V_{base}}=\frac{2.50M*0.017L}{0.1L} =0.425M=0.425mol/L[/tex]

Now, we can compute the moles of the base as:

[tex]n_{base}=0.425mol/L*0.1L=0.0425mol[/tex]

(a) Now, one divides the provided mass over the previously computed moles to get the molecular mass of the unknown base:

[tex]\frac{4.36g}{0.0425mol} =102.6g/mol[/tex]

(b) Subtracting the atomic mass of oxygen and hydrogen, the metal's atomic mass turns out into:

[tex]102.6g/mol-16g/mol-1g/mol=85.6g/mol[/tex]

So, that atomic mass dovetails to the Rubidium's atomic mass.

Best regards.

Final answer:

To find the mole fraction of each gas in the mixture, calculate the number of moles of methane and propane using the Ideal Gas Law. Then, divide the moles of each gas by the total moles to find the mole fraction.

Explanation:

To find the mole fraction of each gas in the mixture, we need to first calculate the number of moles of methane and propane in the mixture. From the given information, we know that the mixture has a volume of 5.04 L. Using the Ideal Gas Law, we can calculate the number of moles of each gas:

Methane (CH4):

1 mole of gas at STP (Standard Temperature and Pressure) occupies 22.4 L

Molar mass of methane (CH4) = 12.01 g/mol + (4 * 1.008 g/mol) = 16.04 g/mol

Number of moles of methane = (5.04 L / 22.4 L) * (19.4 g / 16.04 g/mol) = 0.454 moles

Propane (C3H8):

1 mole of gas at STP occupies 22.4 L

Molar mass of propane (C3H8) = (3 * 12.01 g/mol) + (8 * 1.008 g/mol) = 44.11 g/mol

Number of moles of propane = (5.04 L / 22.4 L) * (19.4 g / 44.11 g/mol) = 0.469 moles

Now, to find the mole fraction of each gas:

Mole fraction of methane = moles of methane / total moles of gas = 0.454 / (0.454 + 0.469) ≈ 0.492

Mole fraction of propane = moles of propane / total moles of gas = 0.469 / (0.454 + 0.469) ≈ 0.508

Ignition transformer

1.      Weight of the transformer is more.

2.      Voltage output of the transformer is from 10,000 volts to 14,000 volts.

3.      Due to lower voltage output, fuel vaporization and ignition will be slow.

4.      When there is a drop in voltage supply, the transformer gets affected.

5.      Consumption of electricity is more.

Solid state igniter.

1.      Igniter weighs very light

2.      Igniter giver voltage output in the range of 14,000 volts to 20,000 volts

3.      Higher voltage output leads to faster vaporization of fuel and ignition

4.      Very small affect is observed when there is a voltage drop.

5.      Less electricity is consumed.

An ignition transformer is a conventional technology used to produce high voltage for ignition in gas and oil burners. In contrast, a solid-state igniter is a more advanced technology that uses semiconductors to convert ionizing radiation into an electrical signal for ignition. The latter is considered faster and more reliable.

An ignition transformer and a solid-state igniter are two different types of devices that play a key role in igniting a system. To understand their differences, we need to look at their functionality in detail.

An ignition transformer is conventional technology used to generate a high voltage needed for ignition in gas and oil burners. It mainly functions by stepping up the voltage, with the output being a high-AC voltage which forms a spark for the ignition of the flame.

On the other hand, a solid-state igniter is a newer technology that uses electronics, specifically semiconductors, to produce the high voltage required for ignition. Since the semiconductors can be constructed in a way that they do not conduct current in a particular direction, ionizing radiation produced by the system can be directly converted into an electrical signal, thereby leading to ignition. With solid-state igniters, the response time is often faster, and the performance is considered more reliable because of fewer moving parts, thus leading to reduced maintenance.

https://brainly.com/question/6605272

#SPJ12

The percent yield of the reaction is 64.25%.

The percent yield of a chemical reaction is the ratio of the actual yield (the amount of product obtained) to the theoretical yield (the amount of product that could be obtained based on the balanced chemical equation), multiplied by 100. In this case, the theoretical yield is 56.9 g and the actual yield is 36.6 g. To calculate the percent yield, divide the actual yield by the theoretical yield and multiply by 100:

Percent Yield = (Actual Yield / Theoretical Yield) x 100

Percent Yield = (36.6 g / 56.9 g) x 100 = 64.25%

Mercury(II) nitrate and Sodium iodide don't react with each other in water, so no precipitate is formed. If a reaction were to occur, it would be a double displacement reaction, like the example provided.

The student is asking to write a balanced chemical equation for the reaction between Sodium iodide (NaI) and Mercury(II) nitrate (Hg(NO3)2). However, these two substances do not react with each other, because both of them are soluble in water. Thus, there will be no precipitate formed, and the answer is no reaction. Nevertheless, it is essential to take note that if these ions were to react to form a precipitate, a double displacement reaction would occur, similar to example: Ba(OH)2 (aq) + 2HNO3(aq) → Ba(NO3)2(aq) + 2H₂O(1), where water and a salt are formed as the products.

https://brainly.com/question/34137415

#SPJ12

The reaction between NaI(aq) and Hg₂(NO₃)₂(aq) results in the formation of NaNO₃(aq) and a precipitate, Hg₂I₂(s). This confirms that a reaction occurs. The balanced chemical equation is provided with phases identified.

The reaction between sodium iodide (NaI) and mercury(I) nitrate (Hg₂(NO₃)₂) in aqueous solutions can be described using the chemical equation:

2NaI(aq) + Hg₂(NO₃)₂(aq) → 2NaNO₃(aq) + Hg₂I₂(s)

In this reaction, the products include aqueous sodium nitrate (NaNO₃) and a precipitate of mercury(I) iodide (Hg₂I₂). Therefore, a precipitate is formed, and the reaction proceeds.

Final answer:

Apple juice is a homogeneous mixture due to its uniform composition throughout, making it visually the same, unlike the other given options.

Explanation:

Among the options given, apple juice is an example of a homogeneous mixture. A homogeneous mixture, or solution, has a uniform composition throughout and does not contain visibly distinguishable parts. Apple juice's uniform composition makes it visually the same throughout, unlike a fruit salad, granite, or sand at the beach, which are examples of heterogeneous mixtures where the composition is not uniform and the different parts can be seen. Other examples of homogeneous mixtures include sports drinks, air, and solutions of salt in water.

Answer:

It tell us that it's necessary 2 moles of Ag in the stoichiometric proportion of the reaction.

Explanation:

The equation of a chemical reaction is a representation of the ideal reaction: 100% yield of the products and without parallel reactions. So, the equation presents the stoichiometric quantities of the substance. For example, for a generic reaction:

A + 2B → 3C

It says that it's necessary 1 mol of A and 2 moles o B to form 3 moles of C. Thus, the numbers before the substances represents the stoichiometric number of moles of that substance.

Refrigerators utilize the principle of heat absorption to vaporize a refrigerant, removing heat from the interior of the refrigerator and releasing it outside. The process involves the cycle of vaporization and condensation, powered by electricity, which maintains the cool temperature inside the fridge.

Refrigerators work based on the principle of

heat absorption

required to vaporize a volatile liquid. In this case, the volatile liquid being used as a refrigerant is a

fluorocarbon

. This liquid absorbs heat from the inside of the refrigerator (at the evaporator), causing it to vaporize. This heat is then released outside the refrigerator (at the condenser) when the vaporized refrigerant is condensed back to a liquid. The heat of vaporization for any substance is the amount of heat required to convert 1 mole of that substance from liquid to gas at constant temperature and pressure. Here, your fluorocarbon has a molar heat of vaporization of 26 kJ/mol. To complete the cycle, work is done on the refrigerant (which we pay for in our electricity bills) to move it through the coils in the refrigerator and begin the cycle again. This overall process is what keeps the refrigerator cool.

https://brainly.com/question/32465523

#SPJ12

To produce 8g of silver, you'd need approximately 4.7g of copper, assuming a 1:1 molar ratio in their reaction.

Before calculating the grams of copper needed to produce 8 grams of silver, you first need to express the mass of silver in moles. To do this, divide the mass by the atomic mass of silver. Next, find the molecular ratio in the reaction of copper to silver. In this case, we'll treat it as a 1:1 ratio as the question didn't provide one. Hence, the moles of copper required will be the same we calculated for silver. Lastly, convert these moles of copper back into grams using the atomic mass of copper.

Let's put this into practice:

So, you will need approximately 4.7 g of copper to produce 8 g of silver, given a 1:1 molar ratio in their reaction.

https://brainly.com/question/31389471

#SPJ12

Answer:

0.5421 moles of carbon dioxide are emitted into the atmosphere.

Explanation:

[tex]1C_3H_8 + 5O_2 \rightarrow 3CO2 + 4H2O[/tex]

Moles of octane = [tex]\frac{20.6 g}{114 g/mol}=0.1807 mol[/tex]

According to reaction 1 mol of octane gives 3 moles of carbon dioxide.

Then, 0.1807 moles of octane will give:

[tex]\frac{3}{1}\times 0.1807 mol=0.5421 mol[/tex] of carbon dioxide

0.5421 moles of carbon dioxide are emitted into the atmosphere.

Answer: Option (a) is the correct answer.

Explanation:

When there occurs no change in chemical composition of a substance then it is known as a physical property.

For example, volume, mass, shape, size, density etc are all physical properties.

In liquids, the molecules are held by slightly less strong intermolecular forces of attraction as compared to a solid. So, the molecules of a liquid are able to slide over each other as they have kinetic energy.

Therefore, a liquid has indefinite shape because they acquire the shape of container in which they are placed. But a liquid does not have a definite volume.

Thus, we can conclude that indefinite volume is not a physical property of a liquid.

Molecular formula of Isoflurane is C₃H₂ClF₅O.

Now calculate the percent composition by mass, which means percent of each element in the compound.

Mass of Isoflurane = 184.49 g/mol

Mass of carbon in the compound = 3 x 12.011 = 36.033g

Mass of hydrogen in the compound = 2 x 1.008 = 2.016g

Mass of chlorine in the compound = 1 x 35.453 = 35.453 g

Mass of fluorine in the compound = 5 x 18.998 = 94.99g

Mass of Oxygen in the compound = 1 x 16 = 16 g

Carbon’s percentage = Mass of carbon in the compound /mass of isoflurane x 100 =36.033/184.49 x 100 =19.53%

Hydrogen’s Percentage = Mass of hydrogen in the compound/mass of isoflurane x 100 = 2.016/184.49 = 1.09%

Chlorine’s percentage = Mass of chlorine in the compound/mass of isoflurane x 100 = 35.453/184.49 =19.22%

Flourine’s percentage = Mass of fluorine in the compound/mass of isoflurane x 100 = 94.99/184.49 x 100 = 51.49%

Oxygen’s percentage = Mass of Oxygen in the compound/mass of isoflurane x 100 =16/184.49 x 100 = 8.67%

The molecular formula of isoflurane is C3H2ClF5O. The percent composition by mass is approximately: C: 19.54%, H: 1.04%, Cl: 19.25%, F: 51.93%, O: 8.23%.

The molecular formula for isoflurane is C3H2ClF5O. To calculate its percent composition by mass, we need to determine the molar mass of isoflurane and then find the contribution of each element to the total mass.

The molar mass of isoflurane can be calculated by summing the atomic masses of each element in the formula:

Molar Mass = (3 x Atomic Mass of C) + (2 x Atomic Mass of H) + Atomic Mass of Cl + (5 x Atomic Mass of F) + Atomic Mass of O

Using the atomic masses from the periodic table, we can calculate:

Molar Mass = (3 x 12.01) + (2 x 1.01) + 35.45 + (5 x 18.99) + 16.00

Molar Mass = 184.06 g/mol

Calculating Percent Composition

The percent composition by mass of an element in a compound is given by:

Percent Composition = (Mass of Element / Total Mass of Compound) x 100

We can calculate the percent composition for each element in isoflurane by dividing the mass contribution of the element by the total molar mass:

% C = (3 x Atomic Mass of C) / Molar Mass x 100

% H = (2 x Atomic Mass of H) / Molar Mass x 100

% Cl = Atomic Mass of Cl / Molar Mass x 100

% F = (5 x Atomic Mass of F) / Molar Mass x 100

% O = Atomic Mass of O / Molar Mass x 100

Substituting the atomic masses and molar mass values, we can calculate the percent composition:

% C = (3 x 12.01) / 184.06 x 100 = 19.54%

% H = (2 x 1.01) / 184.06 x 100 = 1.04%

% Cl = 35.45 / 184.06 x 100 = 19.25%

% F = (5 x 18.99) / 184.06 x 100 = 51.93%

% O = 16.00 / 184.06 x 100 = 8.23%

So, the percent composition by mass of isoflurane is approximately:

The chemical reaction for this is in the form of:

Na + Cl + O --> NaClO

The elements on the left side of the --> symbol are the reactants while on the right side we can find the product. Therefore the reactants are:

Na, Cl, and O

The chemical reaction for this is in the form of:

Na + Cl + O = NaClO

To calculate this,

We know that energy is 1 photon 
E = hc/wavelenth 
wavelength of 10.0 m 

Solution:
h = 6.626 x 10^-34 Jsec 
C = 2.9979 x 10^8 m/sec 
E = 6.626 10^-34 * 2.9979 10^8 / 10 = 1.9864 10^-26J 

Then, the number of photons is computed by:

n = 1000 / 1.9864 10^-26 = 5.04 10^28 photons