The solubility of [tex]C{O_2}[/tex]in an open bottle of seltzer water is[tex]\boxed{{\mathbf{9}}.{\mathbf{3394g}}{\text{/}}{\mathbf{100}}{\text{ }}{\mathbf{mL}}}[/tex].
Further explanation
Molar solubility is the concentration of pure substance dissolved in saturated solution. It is generally defined as ratio of number of moles of substance dissolved in one litre of solution until the solution becomes saturated. The S.I unit of molar solubility is mol/L.
The equilibrium constant between the compound and its ion, when dissolved in solution, is known as solubility product constant. It is denoted by [tex]{{\text{K}}_{{\text{sp}}}}[/tex]. The solubility product constant is used to calculate the product of concentration of ions at equilibrium. Higher the solubility product constant more will be the solubility of the compound.
The formula to relate concentration (C), volume (V), and number of moles (n) is as follows:
[tex]{\text{C = }}\frac{{\text{n}}}{{\text{V}}}[/tex] …… (1)
Ideal gas law is considered as the equation of state for any hypothetical gas. The expression for the ideal gas equation of gas is as follows:
[tex]{\text{PV}}={\text{nRT}}[/tex] …… (2)
Here,
P is the pressure of the gas.
V is the volume of gas.
n denotes the number of moles of gas.
R is the gas constant.
T is the temperature of gas.
The equation (2) can be written as:
[tex]{\text{P}}=\frac{{\text{n}}}{{\text{V}}}{\text{RT}}[/tex] …… (3)
Substitute C for [tex]\frac{{\text{n}}}{{\text{V}}}[/tex] in equation (2), the formula will become,
[tex]{\text{P}} = {\text{CRT}}[/tex] …… (4)
If the temperature is constant then RT will be constant. Then the equation (4) can be written as follows:
[tex]\frac{{\text{P}}}{{\text{C}}}={\text{constant}}[/tex] …… (5)
If we have initial and final value of pressure and concentration then the equation (5) will be written as follows:
[tex]{{\text{P}}_1}{{\text{C}}_{\text{2}}}={{\text{P}}_2}{{\text{C}}_1}[/tex] …… (6)
Here,
[tex]{{\text{P}}_1}[/tex]is the initial pressure.
[tex]{{\text{P}}_2}[/tex]is the final pressure.
[tex]{{\text{C}}_1}[/tex]is the initial concentration.
[tex]{{\text{C}}_2}[/tex]is the final concentration.
On rearranging equation (6) for [tex]{{\text{C}}_2}[/tex] we get,
[tex]{{\text{C}}_{\text{2}}}=\frac{{{{\text{P}}_{\text{2}}}{{\text{C}}_{\text{1}}}}}{{{{\text{P}}_{\text{1}}}}}[/tex] …… (7)
[tex]{{\text{P}}_1}[/tex]is 760 mmHg
[tex]{{\text{P}}_2}[/tex]is[tex]{\text{4}}{\text{.2}} \times {\text{1}}{{\text{0}}^{\text{4}}}\;{\text{mmHg}}[/tex]
[tex]{{\text{C}}_1}[/tex]is 0.169g/100 mL.
Substitute the values of [tex]{{\text{P}}_1}[/tex], [tex]{{\text{P}}_2}[/tex], and [tex]{{\text{C}}_1}[/tex]in equation (7).
[tex]\begin{aligned}{{\text{C}}_2}&=\frac{{\left({{\text{4}}{\text{.2}} \times {\text{1}}{{\text{0}}^{\text{4}}}\;{\text{mmHg}}}\right)\times\left( {{\text{0}}{\text{.169 g/100 mL}}}\right)}}{{\left({{\text{760 mmHg}}}\right)}}\\&={\text{9}}{\text{.3394 g/100}}\;{\text{mL}}\\\end{aligned}[/tex]
The solubility of [tex]{\mathbf{C}}{{\mathbf{O}}_{\mathbf{2}}}[/tex]in an open bottle of seltzer water is 9.3394g/100 mL.
Learn more:
1. Determination of number of atoms of hydrogen are present in 2.92g of water molecule https://brainly.com/question/899408
2. Identify the intermolecular forces present between given molecules. https://brainly.com/question/10107765
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Solutions
Keywords: ideal gas, pressure, volume, temperature, number of moles, initial, final, equation, 760 mmHg, 9.334g/100mL, 0.169g/100mL.
What is the mass of 3.09 x 10+24 atoms of sulfur in grams?
The mass of [tex]{\text{3}}{\text{.09}} \times {\text{1}}{{\text{0}}^{{\text{24}}}}[/tex] atoms of sulfur is [tex]\boxed{{\text{164}}{\text{.528 g}}}[/tex].
Further explanation:
Avogadro law:
According to Avogadro law, one mole of any substance contains [tex]{\text{6}}{\text{.022}} \times {\text{1}}{{\text{0}}^{{\text{23}}}}[/tex] particles. These particles can be atoms or molecules.
Firstly the number of moles of sulfur is to be calculated. This is done by using equation (1).
The formula to calculate the moles of sulfur is as follows:
[tex]{\text{Number of moles of S}} = \frac{{{\text{Number of atoms of S}}}}{{{\text{Avogadro's Number}}}}[/tex] …… (1)
The number of atoms of S is [tex]{\text{3}}{\text{.09}} \times {\text{1}}{{\text{0}}^{{\text{24}}}}[/tex].
The value of Avogadro’s number is [tex]{\text{6}}{\text{.022}} \times {\text{1}}{{\text{0}}^{{\text{23}}}}{\text{ atoms}}[/tex].
Substitute these values in equation (1).
[tex]\begin{aligned}{\text{Number of moles of S}}&{\mathbf{=}}\left( {{\text{3}}{\text{.09}} \times {\text{1}}{{\text{0}}^{{\text{24}}}}{\text{ atoms}}}\right)\left({\frac{{{\text{1 mol}}}}{{{\text{6}}{\text{.022}} \times {\text{1}}{{\text{0}}^{{\text{23}}}}{\text{ atoms}}}}}\right) \\&={\text{5}}{\text{.1311}}\;{\text{mol}}\\\end{aligned}[/tex]
Now the moles calculated from equation (1) are used to evaluate the mass of sulfur. This is done by using equation (2).
The formula to calculate the mass of sulfur is as follows:
[tex]{\text{Mass of S}} = \left( {{\text{Moles of S}}} \right)\left( {{\text{Molar mass of S}}} \right)[/tex] …… (2)
The moles of sodium are 5.1311 mol.
The molar mass of S is 32.065 g/mol.
Substitute 5.1311 mol for the moles of S and 32.065 g/mol for the molar mass of S in equation (2).
[tex]\begin{aligned}{\text{Mass of S}}&=\left({{\text{5}}{\text{.1311 mol}}}\right)\left({\frac{{{\text{32}}{\text{.065 g}}}}{{{\text{1 mol}}}}}\right)\\&=164.52{\text{8 g}}\\\end{aligned}[/tex]
Therefore the mass of sulfur is 164.528 g.
Learn more:
1. How many moles of Cl are present in 8 moles of [tex]{\text{CC}}{{\text{l}}_4}[/tex]? https://brainly.com/question/3064603
2. Calculate the moles of ions in HCl solution: https://brainly.com/question/5950133
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Mole concept
Keywords: sulfur, mass, atoms, Avogadro’s law, 164.528 g, 32.065 g/mol, S, molar mass of S, moles of S, 5.1311 mol, moles.
Final answer:
The mass of 3.09 x 10²⁴ atoms of sulfur can be calculated by first determining the number of moles using Avogadro's number, then multiplying by sulfur's molar mass, resulting in 164.16 grams.
Explanation:
To find the mass of 3.09 x 10²⁴ atoms of sulfur in grams, we first need to use Avogadro's number, which tells us that one mole of any substance contains approximately 6.022 x 10²³ atoms. Knowing that the molar mass of sulfur (S) is 32 g/mol, we can calculate the mass of the given number of sulfur atoms.
Calculate the number of moles of sulfur atoms: Number of moles = (3.09 x 10²⁴ atoms) / (6.022 x 10²³ atoms/mol) = 5.13 moles.
Calculate the mass of sulfur: Mass = (5.13 moles) x (32 g/mol) = 164.16 g.
Therefore, the mass of 3.09 x 10²⁴ atoms of sulfur is 164.16 grams.
What form of oxygen is not toxic to microorganism is it oh-?
When is energy released during a chemical reaction?
when chemical bonds break and form
when chemical bonds form
when chemical bonds break
When liquid water is heated to 100° c, it boils and becomes water vapor. when the vapor is cooled below 100° c, it turns back into a liquid. what is the correct name for the process in which the vapor turns back into a liquid?
Determine the charge on each ion in the following compounds, and name the compound. Spelling counts!
1. Mg₃N₂: Magnesium nitride
charge Mg = +2
charge N = -3
2. Al₂S₃: Aluminum sulfide
charge Al = +3
charge S = -2
Further explanationThe naming of chemical compounds is giving a special name to a compound that aims to facilitate the classification of compounds and facilitate the identification of a compound. The rules for naming chemical compounds have been determined by the IUPAC (International Union of Pure and Applied Chemistry)
This nomenclature includes the naming of ion compounds, covalent compounds, and polyatomic
For ionic compounds consisting of cations (ions +) and anions (ions -)
The naming is preceded by the cation then the anion with the -ide suffix added
Generally for this ion compound consists of metal elements as cations and non-metals as anions
1. For metal and non-metal compoundsMetal: cation, positively charged.
Nonmetal: negative anion.
The anion cation's charge is crossed
Example:
Fe₂S₃
Fe charge = +3
S charge = -2
The name: metal + non-metal + -ide
Example: BaCl₂ -> Barium chloride
For transition metals, which have several oxidation charges / numbers, write the oxidation number in roman numbers
Example: SnO: lead (II) oxide
SnO₂: lead (IV) oxide
2. For metal and non-metal compoundsThe naming: name non-metal + non-metal + suffix -ide
In the elements given the prefix mono, di, tri, tetra, penta if more than one element is formed
Example:
SO₂: Sulfur dioxide
SO₃: Sulfur trioxide
The question that needs to be completed is
Determine the charge on each ion in the following compounds, and name the compound. Spelling counts! (a) Mg₃N₂ Name: Charges: Mg N (b) Al₂S₃ Name: Charges: Al S
1. In the compound Mg₃N₂
load Mg = +2
charge N = -3
Name: Magnesium nitride
2. In the Al₂S₃ compound
Al load = +3
load S = -2
Name: Aluminum sulfide
Learn morethe chemical formula for each ionic compound.
https://brainly.com/question/11545331
two functional groups that contain ionic charges
https://brainly.com/question/1687047
Binary ionic compounds
https://brainly.com/question/2099598
Keywords: ionic compound, the naming of chemical compounds
Which solution contains the largest number of moles of chloride ions?
a.30.00 ml of 0.100m cacl2
b.10.0 ml of 0.500m bacl2
c.25.00 ml of 0.400m kcl
d.4.00 ml of 1.000m nacl
e.7.50 ml of 0.500m fecl3?
The solution which contains the largest number of moles of Chlorine ions is Choice D: 7.50 ml of 0.500m fecl3.
Definition:
The molarity of a solution is simply the ratio of the number of moles of the solute to the liters of solution.
Molarity, M = number of moles of solute, (n) /liters of solution.Number of moles of solute, n = molarity x liters of solution.For Choice (a):
30.00 ml of 0.100m Cacl2No. of moles of CaCl2 = 0.1 x 0.03 = 3x10-³ molesSince, 1 mole of CaCl2 contains 2 moles of chlorine, therefore 3x10^-3 moles of CaCl2 contains 6x10^-3 moles of chlorineFor Choice (b):
10.0 ml of 0.500m BaCl2No. of moles of BaCl2 = 0.5 x 0.01 = 5x10-³ molesSince, 1 mole of BaCl2 contains 2 moles of chlorine, therefore 5x10-³ moles of BaCl2 contains 10x10-³ moles of chlorineFor Choice (c):
25.00ml of 0.400m KClNo. of moles of KCl = 1 x 0.004 = 0.004 molesSince, 1 mole of KCl contains 1 mole of chlorine, therefore 4x10-³ moles of KCl contains 4x10-³ moles of chlorine.For Choice (d):
4.00 ml of 1.000m NaClNo. of moles of NaCl = 1 x 0.004 = 0.004 moles1 mole of NaCl contains 1 mole of chlorine, therefore 4x10-³ moles of NaCl contains 4x10-³ moles of chlorine.For Choice (e):
7.50 ml of 0.500m fecl3No. of moles of FeCl3 = 0.5 x 0.0075 = 3.75x10-³ molesSince, 1 mole of FeCl3 contains 3 moles of chlorine, therefore 3.75x10-³ moles of FeCl3 contains 0.01125 moles of chlorineUltimately, The solution which contains the largest number of moles of Chlorine ions is Choice D: 7.50 ml of 0.500m FeCl3.
Read more:
https://brainly.com/question/4020881
Two moles of lithium has a mass of 13.88g. true or false
Formic acid, hcooh, is a weak electrolyte. what solutes are present in an aqueous solution of this compound? write the chemical equation for the ionization of hcooh.
Formic acid, HCOOH, is a weak electrolyte. In an aqueous solution, the solutes present are HCOOH molecules, H+ ions, and HCOO- ions. The chemical equation for the ionization of formic acid is HCOOH(aq) → H+ (aq) + HCOO- (aq). Only a small fraction of formic acid molecules dissociate into ions in solution.
Explanation:HCOOH is formic acid, a weak acid. In an aqueous solution of formic acid, the solutes present are HCOOH molecules and the dissociated ions, H+ and HCOO-. The chemical equation for the ionization of formic acid is:
HCOOH(aq) → H+ (aq) + HCOO- (aq)
This equation shows that only a small fraction of formic acid molecules dissociate into ions in solution.
Learn more about Formic acid: solutes and ionization here:https://brainly.com/question/41227722
#SPJ6
Atoms on the left side of the periodic table tend to form positive ions because
How to measure mass of unknown metal using only graduated cylinder, dropper, dish, ruler funnel, and scoopula?
Final answer:
To measure the mass of an unknown metal using only a graduated cylinder, dropper, dish, ruler, funnel, and scoopula, you can use the displacement method.
Explanation:
To measure the mass of an unknown metal using only a graduated cylinder, dropper, dish, ruler, funnel, and scoopula, you can use the displacement method. Here are the steps:
Weigh the empty dish using a balance.
Fill the graduated cylinder with water up to a certain level and record the initial volume.
Carefully lower the metal into the graduated cylinder using the dropper, making sure it is fully immersed in water.
Measure the new volume of the water and metal in the graduated cylinder.
Calculate the volume of the metal by subtracting the initial volume from the final volume.
Determine the density of the metal by dividing its mass (obtained from the weighed dish) by its volume.
The mass of the unknown metal can then be obtained by multiplying its density by its volume.
A nitrogen oxide is 63.65% by mass nitrogen. the molecular formula could be ________.
Answer:
[tex]N_{2}O[/tex]
Explanation:
1. First suppose that the mass of the compound is 100g, so:
mass of N + mass of O = 100g
2. Multiply the percentages of N and O by the total mass of the compound:
For the N:
[tex]63.65*100g=63.65g[/tex] of N
For the O:
[tex]100-63.65=36.35g[/tex] of O
3. Divide the mass of each atom between the molar mass:
For the N:
[tex]\frac{63.65g}{14g}=4.54[/tex]
For the O:
[tex]\frac{36.35g}{16g}=2.27[/tex]
4. Divide each value by the smallest:
For the N:
[tex]\frac{4.54}{2.27}=2[/tex]
For the O:
[tex]\frac{2.27}{2.27}=1[/tex]
5. Write each atom with its number to obtain the molecular formula:
[tex]N_{2}O[/tex]
PLEASE HELP!
List the 5 basic steps of the scientific method in order
The scientific method includes making observations, asking questions, researching, formulating a hypothesis, and testing the hypothesis through experimentation.
Explanation:Steps of the Scientific Method
The scientific method is a process typically followed during a scientific investigation to gain knowledge and test ideas. The basic steps are:
Make observations about the natural world.Ask a question based on these observations.Conduct research to find out what is already known about the topic.Formulate a hypothesis, which is a testable prediction.Test the hypothesis through experimentation.Following these steps correctly helps ensure that the conclusions drawn are based on reliable evidence and logical reasoning. If the hypothesis is not supported by the experiment, alternative hypotheses should be proposed and tested. The method encourages iterative testing and refinement of hypotheses.
WILL MARK AS BRAINLIEST
Name the following ionic compounds.
which property is a measure of the average kinetic energy of the particles in the sample of matter
PLZ HELP!!
A _____ might be thought of as an inclined plane that moves.
wheel and axle
pulley
wedge
lever
in some places there are deep cracks in earths crust called
Which feature do gas giants have that terrestrial planets do not?
a. volcanoes
b. rings
c. rift valleys
d. mountains
Which of these best describes the bonding between oxygen and hydrogen in the water molecule?
Chemical reactions between metals and non- metals result in the formation of
Elements are arranged in the periodic table based on their _____. mass number atomic number atomic mass percent abundance
Answer: atomic number
Explanation:
If an isotope of oxygen (O) has 1 less neutron, how many electrons does it have?
and
If an isotope of sodium (Na) has 2 extra neutrons, what is it’s atomic weight?
The number of electrons in the isotope of oxygen is eight. The atomic mass of sodium with 2 extra electrons is 25.
What is an isotope?Isotopes are atoms of an element that have the same atomic number but a different atomic mass. Isotopes of an element carry the same number of electrons and protons. The numbers of neutrons in their respective nucleus is different.
For example, the isotope of oxygen is given as oxygen- 16, oxygen - 17, and oxygen-18 they all have eight electrons or protons.
If the number of neutrons in oxygen increase by one, it becomes the isotope of oxygen. As for isotope, the number of electrons is the same. So the electrons in the isotope of oxygen are equal to eight.
The mass number of sodium is 23 and If two extra neutrons are added to it. As we know, the mass number is equal to the sum of protons and neutrons. So atomic weight of the isotope will be equal to 25 i.e.(23 + 2).
Learn more about isotopes, here:
brainly.com/question/11680817
#SPJ2
during which step of the scientific method does a scientist determine whether the hypothesis was supported?
1- design an experiment
2- collect date
3- perform the experiment
4- draw conclusion
What element makes protein different from carbohydrate and fat? select one:
a. hydrogen
b. oxygen
c. carbon
d. nitrogen?
Nitrogen element makes protein different from carbohydrate and fat
d. nitrogen
What are the constituents of protein, carbohydrates and fatsProteins differ from carbohydrates and fats in that they contain the element nitrogen. While carbohydrates and fats are composed of carbon, hydrogen, and oxygen, proteins also contain nitrogen in addition to these elements.
Nitrogen is an essential component of amino acids, which are the building blocks of proteins. This nitrogen-containing structure allows proteins to have unique properties and functions that are distinct from carbohydrates and fats.
Learn more about carbohydrate at
https://brainly.com/question/336775
#SPJ6
The pks for the ionizable groups in the amino acid lysine are pk1 = 2.18, pk2 = 8.95, and pk3 = 10.53. what would be the net charge on lysine at ph = 7.0
Predict the mass of iron (III) sulfide produced when 3.0 g of iron filings react completely with 2.5 g of yellow sulfur solid, S8(s).
lettie is having a problem in her experiment that she does not know how to solve. in order to move forward, letti needs to be a.creative b.opinionated c.curious d.skeptical
a. creative
hope this helps!
What compound is composed of 3 fatty acids and glycerol?
A Triglyceride is the compound composed of three fatty acids and glycerol, and serves as the main form of fat storage in the bodies of humans and other animals.
Explanation:The compound composed of three fatty acids and glycerol is known as a Triglyceride. Triglyceride is the main form of fat stored in the bodies of humans and other animals. During digestion, the body breaks down fats into fatty acids and glycerol, which can then be absorbed into the bloodstream. The body can use these components to produce energy or to reassemble them into triglycerides for storage and later use.
Learn more about Triglyceride here:https://brainly.com/question/31838116
#SPJ6
The type of bond that forms between two atoms when electrons are shared is a(n) _______________ bond.
What is the purpose of the uninoculated control tubes used in the oxidation fermentation test?
how does a ribosomes structure relate to its function
Ribosomes are cellular structures that facilitate protein synthesis by linking amino acids to form a protein. They are composed mainly of rRNA and proteins, with the rRNA playing a crucial role in the alignment during synthesis and catalysis of peptide bond formation. The abundance of ribosomes in certain cells like pancreatic cells indicates their significant role in high-rate protein production.
Ribosomes are essential cellular structures that are responsible for protein synthesis. The term synthesis indicates the process of combining various amino acids to produce a complete protein. These ribosomes link amino acids in a specific sequence, forming a polypeptide chain that will fold into a functional 3-dimensional protein structure. The size and shape of a protein determine its function, highlighting the direct relationship between structure and function in ribosomal activity.
Composed mainly of ribosomal RNA (rRNA) and protein, ribosomes have subunits that work together during protein synthesis. The rRNA plays a critical role in ensuring the proper alignment of the messenger RNA (mRNA), transfer RNA (tRNA), and the ribosome itself during this process. Additionally, the rRNA possesses enzymatic activity and catalyzes the formation of peptide bonds, which are essential in linking amino acids.
Ribosomes are abundantly found in cells that produce substantial amounts of proteins, such as pancreatic cells. Since these cells are responsible for creating digestive enzymes, numerous ribosomes are required to meet the high demand for protein synthesis. This abundance exemplifies the concept that the form, or structure, of a cell or cellular component reflects its function.
The structure of ribosomes, which consists of ribosomal RNA (rRNA) and proteins, allows them to efficiently synthesize proteins by facilitating the translation of messenger RNA (mRNA) into polypeptides.
Composition and Structure:
Ribosomes are composed of two subunits: a larger subunit and a smaller subunit. These subunits are made up of ribosomal RNA (rRNA) and proteins. The large subunit typically contains enzymatic activity essential for forming peptide bonds, while the small subunit is responsible for reading the sequence of mRNA.
Binding Sites:
Ribosomes have three critical binding sites: the A (aminoacyl) site, the P (peptidyl) site, and the E (exit) site. This specific arrangement allows for the sequential addition of amino acids to the growing polypeptide chain. The A site holds the incoming aminoacyl-tRNA, the P site holds the tRNA attached to the growing polypeptide chain, and the E site is where the empty tRNA exits.
Translation Process:
During translation, ribosomes move along the mRNA strand, facilitating the pairing of tRNA anticodons with the corresponding mRNA codons. This ensures that the correct amino acids are incorporated in the proper sequence to form proteins.
Efficiency and Functionality:
The ribosomal structure allows for high efficiency in protein synthesis. The close proximity of the A and P sites enables rapid transfer of the growing polypeptide chain from one tRNA to another, speeding up the translation process.