It lost electrons and was oxidized
Determine the number of neutrons in an atom U-233.
Answer : The number of neutrons in an atom U-233 is, 141 neutrons.
Explanation :
The given atom is, U-233
The atomic mass number of U = 233
The atomic number of U = 92 (from the periodic table)
Now we have to determine the number of neutrons in U-233.
Number of neutrons = Atomic mass number - Atomic number
Number of neutrons = 233 - 92 = 141
Therefore, the number of neutrons in an atom U-233 is, 141 neutrons
How many gallons of 80% antifreeze solution must be mixed with 60 gallons of 20% antifreeze to get a mixture that is 70% antifreeze? Use the six-step method.
...?
Oil doesn't mix with water because
What is the theoretical yield of carbon dioxide if H3C6H5O7+3NaHCO3-3CO2+Na3C6H5O7
The theoretical yield of carbon dioxide can be calculated using the stoichiometric ratio in the balanced equation for the reaction. It is the amount of product that would be obtained if all reactants were completely converted to product under ideal conditions. The theoretical yield can be calculated by multiplying the amount of the starting reactant by the stoichiometric ratio in the balanced equation.
Explanation:Theoretical yield is the amount of product that would be obtained from a chemical reaction if the reaction proceeded perfectly and all reactants were completely converted to product. In this case, the balanced equation shows that 1 mole of H3C6H5O7 reacts with 3 moles of NaHCO3 to produce 3 moles of CO2. Therefore, the theoretical yield of carbon dioxide would be 3 times the amount of H3C6H5O7 given.
Example: If 2 moles of H3C6H5O7 are given, the theoretical yield of CO2 would be 3 x 2 = 6 moles.
Note that the theoretical yield assumes ideal conditions and perfect conversion, so the actual yield may be less due to factors like incomplete reactions or side reactions.
Learn more about The Theoretical yield of carbon dioxide here:https://brainly.com/question/23123430
#SPJ2
What allows the asthenosphere to be able to move slowly?
a. the heat of earth's interior at that depth
b. the friction of the plates moving above it
c. the magma moving up from earth's inner core
d. the pressure of the rock above the asthenosphere
Answer:
Option (A)
Explanation:
The asthenosphere is the upper part of the mantle and this region is just below the lithosphere. The lithospheric plates are divided into 2 types, namely the continental crust and the oceanic crust. These plates moves over this layer of asthenosphere due to the generation of the convection current in the mantle. This currents also forces the asthenosphere to move considerably at a slower rate. This convection current is formed due to the heat radiated from the core (interior) of the earth. The core of the earth is comprised of the denser and molten rocks such as iron and nickel. The rocks in the asthenosphere are solid in nature, but they have the ability to move during deformation.
Hence, the correct answer is option (A).
Calculate the molar mass for h2so4
To calculate the molar mass of sulfuric acid (H2SO4), sum the molar masses of hydrogen, sulfur, and oxygen based on their respective quantities, yielding a molar mass of 98.09 g/mol.
Explanation:To calculate the molar mass of sulfuric acid (H2SO4), you need to sum the molar masses of all the atoms in a molecule of H2SO4. Each atom's molar mass is found on the periodic table: hydrogen (H) has a molar mass of approximately 1.01 g/mol, sulfur (S) has a molar mass of approximately 32.07 g/mol, and oxygen (O) has a molar mass of approximately 16.00 g/mol.
Using these values, you can perform the following calculation:
For hydrogen: 2 atoms × 1.01 g/mol = 2.02 g/molFor sulfur: 1 atom × 32.07 g/mol = 32.07 g/molFor oxygen: 4 atoms × 16.00 g/mol = 64.00 g/molAdd these values together to get the total molar mass of H2SO4:
Molar mass = 2.02 g/mol + 32.07 g/mol + 64.00 g/mol = 98.09 g/mol
This is the molar mass for sulfuric acid, which is essential for various calculations in chemistry, such as determining the number of moles in a given sample or calculating the concentration of solutions.
What is the oxidation number of Chlorine in NaClO4?
Answer: Oxidation state of chlorine in the given compound is +7.
Explanation:
Oxidation state is defined as the number which is assigned to the element when it gains or loose electrons. If the element gains electron, it will attain a negative oxidation state and if the element looses electrons, it will attain a positive oxidation state.
We take the oxidation state of chlorine atom be 'x'.
Oxidation state of sodium atom = +1
Oxidation state of oxygen atom = -2
Evaluating the oxidation state of chlorine atom:
[tex]+1+x+4(-2)=0\\\\x=+7[/tex]
Hence, the oxidation state of chlorine in the given compound is +7.
In the given question, the oxidation number of chlorine (Cl) in [tex]\rm NaClO_4[/tex] is +7.
The oxidation number of an atom is defined as the charge that atom would have if all the shared electrons in the bonds were assigned to the more electronegative atom in the bond.
In [tex]\rm NaClO_4[/tex], sodium (Na) has an oxidation number of +1 and oxygen (O) has an oxidation number of -2. The overall charge of the compound is -1, which means that the sum of the oxidation numbers of all the atoms in the compound must equal -1.
Let x be the oxidation number of chlorine. Then we have:
[tex](+1) + x + 4(-2) = -1[/tex]
Simplifying the equation, we get:
[tex]+1 + x - 8 = -1[/tex]
[tex]x - 7 = -1[/tex]
[tex]x = +7[/tex]
Therefore, the oxidation number of chlorine in [tex]\rm NaClO_4[/tex] is +7.
Learn more about oxidation number here:
https://brainly.com/question/29263066
#SPJ6
HELP!!!
Which of these organs is not found in the digestive system?
A.stomach
B.large intestine
C.small intestine
D.urethra
Which of the following is not an example of a polymer?
Plastic
Nylon
Amino acid
Polystyrene
Answer: Amino acid
Explanation:
Amino acid is a monomer that combines together to form a polymer known as protein. Two or more than two amino acids combine to form a protein.
The amino acids are joined together by peptide bond. Amino acids are the most important and basic components of life that performs the vital functions of the body.
how does Dr.Hoffmann's ultrasound device benefit society? ( modern chemistry textbook page 180).
Answer:
In 1966, Dr. Hoffmann recorded for the first time in medicine embryonic movements and the heartbeat of the fetus using an ultrasound system.
Explanation:
Today, ultrasound is a technique widely used by many medical specialties, in the emergency department, in intensive care or in daily practice.
In 1794, the Italian Spallanzani observed that during the flight of bats they did not collide with anything despite being blind. It is then that he theorizes that they emitted sounds imperceptible to the man he would call ultrasounds, which they capture with their ears after bouncing off objects.
In 1842, Christian Doppler's first article on the effect of his name appears.
In 1912, Richardson suggests the use of ultrasonic echoes to detect submerged objects, creating the first ultrasonic generator five years later by Paul Langevin and Chilowsky.
Since then the applications of this new technology have been unstoppable, especially in medicine.
Final answer:
Dr. Hoffmann's ultrasound device is used for both diagnostic imaging, such as fetal monitoring, at high frequency, and therapeutic treatments, such as tumor destruction, at lower frequency, providing non-invasive, safe, and effective medical care.
Explanation:
Dr. Hoffmann's ultrasound device provides significant benefits to society, particularly in the fields of medicine and healthcare. Ultrasound technology operates on the principle of using high-frequency sound waves to create images or induce therapeutic effects within the human body. For diagnostic purposes, such as observing a fetus in the womb, ultrasound imaging tends to use higher frequencies ranging from 5-20 MHz because higher frequencies produce more detailed images, which are essential for accurate monitoring and diagnostics.
Meanwhile, for therapeutic applications, such as destroying cancerous tumors, lower frequencies of 1-3 MHz can generate sufficient heat to damage and destroy tumor cells without harming surrounding tissues, offering a non-invasive treatment option.
These medical applications of ultrasound are just two examples of how this technology has revolutionized healthcare, making it possible to diagnose and treat patients safely, effectively, and without invasive surgical procedures. Moreover, the development and improvement of ultrasound devices contribute to ongoing research and the discovery of even more applications in various fields beyond medicine.
What are the terms that describe these values for the element oxygen?
Answer: 18 = Mass umber
8 = atomic number
Explanation:
An atom is smallest unit of a matter or substance.It consist of three subatomic particles : electrons, protons, neutrons.
Protons and neutrons are located in the center of an atom where while mass of an atom is concentrated.
Mass number = Number of protons + Number of neutrons
Atomic number = Number of protons = Number of electrons (for a neutral atom)
General representation of an element is given as: [tex]_Z^A\textrm{X}[/tex]
where,
Z represents Atomic number
A represents Mass number
X represents the symbol of an element
Oxygen is the 8th element of the periodic table and is written as [tex]_8^{16}\textrm{O}[/tex], thus 8 = atomic number and 18= Mass number
look at the chemical formula for glucose, how many carbon C, hydrogen H, and oxygen O, atoms are found in a molecule of glucose?
What is a solution called when it contains as much solute as it can possibly hold at a given tempature?
Is freshly squeezed orange juice a single element?
which formula is correctly paired with its name? 1.MgCl2 magnesium dichloride
2.N2O5 dinotrogen pentoxide 3.H20 hydrogen oxide 4.CuCl2, copper (III) chloride please help! i think its1 or 4
The correct pairing of a chemical name with its formula from the given options is 2.N2O5, which is named dinotrogen pentoxide.
Of the given options, 2.N2O5 dinotrogen pentoxide is correctly paired with its name. The chemical name for MgCl2 is magnesium chloride, not magnesium dichloride. Similarly, H20 should be written as H2O and it is correctly named water or dihydrogen monoxide, not hydrogen oxide. Lastly, CuCl2 is copper (II) chloride, not copper (III) chloride, because copper in this compound has a +2 oxidation state, not +3.
Which is a characteristic of a strong base??
If this atom has a balanced charge, how many protons would you expect to find in this atom?
0
2
4
6
Answer:
If you are in k12 then I think the answer you are looking for is 6
Hydrogen reacts with an element to form a compound. Which element would have the most electrons available to react with hydrogen?
a) oxygen
b) chlorine
c) neon
d) nitrogen
Answer:
B. Chlorine
Explanation:
Describe the negative effects of wind machines
If an isotope of an element has 33 neutrons and a mass number of 64, how many electrons must it have?
Answer:
The isotope must have 31 electrons
Explanation:
Mass number = (number of neutrons)+(number of protons)Here, mass number of element is 64 and number of neutrons is 33So, number of protons i the element = (mass number)-(number of neutrons) = (64)-(33) = 31Isotope of an element remain present in neutral form.So, number of protons should be equal to number of electrons in that isotope. Because proton has +1 charge and electron has -1 chargeSo, the isotope must have 31 electrons.How do an ionic bond and covalent bond differ?
A) There is no difference. Both an ionic bond and a covlent bond share electrons.
B) A covalent bond is an attraction between oppositely charges ions. An ionic bond is a sharing of electrons between atoms.
C) There is no difference. Both an ionic bond and a covalent bond are attractions between oppositely charged ions.
D) An ionic bond is an attraction between oppositely charged ions. A covalent bond is a sharing of electrons between atoms.
Answer:
The answer is of course, D
Explanation:
For example, since potassium (K) is a metal and chlorine (Cl) is a nonmetal, if these two elements combine, they will form an ionic bond. If carbon (C), a nonmetal, and oxygen (O), a nonmetal, combine, they will form a covalent bond.
Hydrogen peroxide is a harmful by-product of normal metabolic activity. In order to prevent damage, hydrogen peroxide must be broken down into water and oxygen quickly. What would speed up the decomposition of hydrogen peroxide
Answer: A
Explanation: USATestPrep
Final answer:
Catalase is used by the body to quickly decompose hydrogen peroxide into water and oxygen. In a lab, this process can be accelerated using catalysts like manganese (IV) oxide or iodide ion, which lower the activation energy and speed up the reaction without being consumed.
Explanation:
Hydrogen peroxide (H₂O₂) is a reactive oxygen species and a byproduct of aerobic metabolism, which can be harmful to cells by causing damage to DNA, proteins, and lipids. To prevent cellular damage, the body uses an enzyme called catalase to facilitate the rapid decomposition of hydrogen peroxide into water (H₂O) and oxygen (O₂). Additionally, the process can be sped up in a laboratory setting by using a catalyst, such as manganese (IV) oxide or iodide ion, which provides an alternate reaction pathway with a lower activation energy, enhancing the reaction rate without being consumed by the reaction itself.
The catalytic decomposition of hydrogen peroxide is crucial both biologically, to protect living organisms from oxidative damage, and chemically, in applications ranging from disinfection to industrial processes. By using catalase or other catalysts, hydrogen peroxide is efficiently broken down, thus eliminating the threat posed by this potent oxidant.
which is the most reducing agent in the periodic table? ...?
What did paleomagnetism give strong evidence for??
The correct answer is Seafloor Spreading
Give me brainliest if it is correct!
Which of the answer choices lists a compound? ice cubes iron paper aluminum
Answer: ice cubes, paper
Explanation:
Element is a pure substance which is composed of atoms of similar elements.It can not be decomposed into simpler constituents using chemical reactions.Example: Iron [tex]Fe[/tex], Aluminium [tex]Al[/tex]
Compound is a pure substance which is made from atoms of different elements combined together in a fixed ratio by mass.It can be decomposed into simpler constituents using chemical reactions.
Example: ice cubes [tex]H_2O[/tex] , paper which is made of cellulose [tex]C_6H_{10}O_5)_n[/tex]
Thus ice cubes and paper are compounds.
What is a centrifuge used for?
Which of the following statements about horizons is true?
a. They are characterized by whether they are solid, liquid, or gas.
b. They are represented by Roman numerals.
c. All soils have completely different horizon patterns.
d. They are defined by their different physical features.
Answer:
d. They are defined by their different physical features.
Explanation:
Horizons is the term used to designate the layers that make up the soil. Each layer receives a letter as identification and has different characteristics. Each shift was formed by the weathering process, which occurs due to the influence of factors, chemical, physical and biological.
As previously mentioned, each layer has different characteristics from each other, which allow a wide interpretation of the soil. These characteristics are physical grades such as color, texture, clay content, viscosity, etc.
For this reason, we can say that the horizon is defined by its different physical characteristics.
When a copper atom loses an electron to become a Cu+
ion, what are the possible quantum numbers of the electron that was lost
Why does air have the following properties mass, volume, density, and pressure?
more Chem.
Calculate the amount of solute needed to prepare the following solutions:
a. 50.0mL of a 5.0% (m/v) KCl solution
b. 1250 mL of a 4.0% (m/v) NH4Cl solution ...?
Final answer:
To prepare a solution, use the formula: amount of solute = volume of solution x concentration of solute. For a 50.0 mL solution with a concentration of 5.0%, you would need 2.5 g of solute. For a 1250 mL solution with a concentration of 4.0%, you would need 50.0 g of solute.
Explanation:
To calculate the amount of solute needed to prepare a solution, we need to use the formula:
Amount of solute = volume of solution x concentration of solute
Using this formula:
a) For a 50.0 mL solution with a concentration of 5.0%, the amount of solute needed is:
Amount of solute = 50.0 mL x 5.0% = 2.5 g
b) For a 1250 mL solution with a concentration of 4.0%, the amount of solute needed is:
Amount of solute = 1250 mL x 4.0% = 50.0 g