Answer: it is very difficult to remove the inner electrons from an atom because of the strong electrostatic force of attraction by the nucleus. In contrast, it is very easy to remove the outer electrons from an atom because the electrostatic force of attraction from the nucleus is not strong enough to hold the outer electrons hence it is removed.
The pathologic changes that occur in the development of coronary atherosclerotic lesions include call damage resulting from which of the following? (Select all that apply):
1. a decrease in smooth muscle cells2. a chronic calcium buildup3. the effects of oxidized lipids4. an inflammatory response5. the formation of plaques
Answer:
3 effect of oxidized lipids
4 an inflammatory response
5 the formation of plaques
Explanation:
Destruction of cells due to oxidation of lipids whereby free radicals steal electrons in cell membrane.
This occurs when tissues get injured by trauma, bacteria or toxins, thereby causing damages cells to release chemicals like histamine, brakykinn that cause vessels to leak fluid into the injured tissues causing swelling.
-plaques are regions of destroyed cells which are visible structures formed inside a cell culture.
Newly discovered planet has twice the mass and three times the radius of the earth. What is the free-fall acceleration at its surface, in terms of the free-fall acceleration g at the surface of the earth?
Answer:
[tex]g_n=\dfrac{2}{9}g[/tex]
Explanation:
M = Mass of Earth
G = Gravitational constant
R = Radius of Earth
The acceleration due to gravity on Earth is
[tex]g=\dfrac{GM}{R^2}[/tex]
On new planet
[tex]g_n=\dfrac{G2M}{(3R)^2}\\\Rightarrow g_n=\dfrac{2GM}{9R^2}[/tex]
Dividing the two equations we get
[tex]\dfrac{g_n}{g}=\dfrac{\dfrac{2GM}{9R^2}}{\dfrac{GM}{R^2}}\\\Rightarrow \dfrac{g_n}{g}=\dfrac{2}{9}\\\Rightarrow g_n=\dfrac{2}{9}g[/tex]
The acceleration due to gravity on the other planet is [tex]g_n=\dfrac{2}{9}g[/tex]
Answer:
2 g/9
Explanation:
mass of planet, Mp = 2 x Me
radius of planet, Rp = 3 x Re
Where, Me is the mass of earth and Re is the radius of earth.
The formula for acceleration due to gravity on earth is given by
[tex]g = \frac{GM_{e}}{R_{e}^{2}}[/tex] .... (1)
The acceleration due to gravity on the planet is given by
[tex]g' = \frac{GM_{p}}{R_{p}^{2}}[/tex]
By substituting the values, we get
[tex]g' = \frac{2GM_{e}}{9R_{e}^{2}}[/tex] ..... (2)
Divide equation (2) by equation (1), we get
g'/g = 2/9
g' = 2 g/9
Thus, the acceleration due to gravity on th enew planet is 2 g/9.
Tech A says quartz crystals under mechanical stress will produce a voltage. Tech B says the piezoelectric principle is used in coolant temp sensors. Who is correct?
Answer:
Tech A is right.
Explanation:
Its the ability of quartz crystal that if we apply a mechanical stress on them by an applied force then they can produce the electricity or voltage. This phenomenon of producing electricity by squeezing a crystal is termed as piezoelectricity or a piezoelectric effect.
Tech A is correct. Quartz crystals under mechanical stress can produce a voltage. The piezoelectric principle is used in coolant temperature sensors.
Explanation:Tech A is correct. Quartz crystals, when subjected to mechanical stress, exhibit piezoelectric behavior, which means they can generate a voltage. This phenomenon is based on the piezoelectric effect, where the crystal structure of quartz generates an electric charge when deformed. This property is extensively used in various applications, including sensors, resonators, and oscillators.
Tech B is also correct. The piezoelectric principle is indeed used in coolant temperature sensors. These sensors utilize a piezoelectric material, such as quartz, to convert temperature changes into an electric signal. When the temperature of the coolant changes, it causes the piezoelectric material to deform, resulting in a change in voltage or current that can be measured and interpreted to determine the coolant temperature.
Learn more about Piezoelectric principle here:https://brainly.com/question/31834656
#SPJ3
What four processes make up the simple ideal Rankine cycle? Constant heat addition in a boiler, Isothermal compression in a pump, constant heat rejection in a condenser and Isentropic expansion in a turbine Constant pressure heat addition in a boiler, Isentropic compression in a pump, constant pressure heat rejection in a condenser and Isentropic expansion in a turbine Constant heat addition in a boiler, Isentropic compression in a pump, constant heat rejection in a condenser and Isobaric expansion in a turbine Constant temperature heat addition addition in a boiler, Isentropic compression in a pump, constant heat rejection in a condenser and Isentropic expansion in a turbine
Answer:
Constant pressure heat addition in a boiler,
Isentropic compression in a pump,
constant pressure heat rejection in a condenser and Isentropic expansion in a turbine
B
Explanation:
The Rankine cycle is a model used to predict the performance of steam turbine systems. It involves the use of these four components
1. Pump
2. Boiler
3. Turbine
4. Condenser
It includes the following processes;
1. Isentropic compression in pump
2. Constant pressure heat addition in boiler
3. Isentropic expansion in turbine
4. Constant pressure heat rejection in condenser
All this processes make up a Rankine cycle.
A cargo helicopter, descending steadily at a speed of 2.3 m/s, releases a small package. Let upward be the positive direction for this problem.
(a) If the package is 71 m above the ground when it is dropped, how long does it take for the package to reach the ground?
1 s
(b) What is its velocity just before it lands? (Indicate the direction with the sign of your answer.)
2 m/s
The package takes approximately 0.117 seconds to reach the ground. The velocity just before it lands is 25.364 m/s (upwards).
Explanation:To find the time it takes for the package to reach the ground, we can use the equation for uniform acceleration: acceleration (a) = g - (-g) = 2g, where g is the acceleration due to gravity (9.8 m/s^2) and the negative sign represents the direction of motion. Using v = u + at, where v is the final velocity (0 m/s), u is the initial velocity (2.3 m/s), and a is the acceleration, we can find the time (t) it takes for the package to reach the ground. Rearranging the equation, we have t = (v - u)/a. Plugging in the values, we have t = (0 - 2.3)/(2g) = -2.3/19.6 = 0.117 seconds. The package takes approximately 0.117 seconds to reach the ground.
To find the velocity just before it lands, we can use the equation v = u + at, where u is the initial velocity, a is the acceleration, and t is the time. Rearranging the equation, we have v = u + at. Plugging in the values, we have v = 2.3 + (2g)(0.117) = 2.3 + 23.064 = 25.364 m/s (upwards).
Learn more about Physics here:https://brainly.com/question/32123193
#SPJ12
A hypothetical square shrinks at a rate of 49 squared meters per minute. At what rate are the sides of the square changing when the sides are 13m each?
Answer:
-3.769 m/min
Explanation:
[tex]\dfrac{dA}{dt}[/tex] = Rate of change of area = -49 m²/min (negative due to shrinking)
s = Side length = 13 m
[tex]\dfrac{ds}{dt}[/tex] = Rate of change of side
Area of a square is given by
[tex]A=s^2[/tex]
Differentiating with respect to time
[tex]\dfrac{dA}{dt}=\dfrac{ds^2}{dt}\\\Rightarrow \dfrac{dA}{dt}=2s\dfrac{ds}{dt}\\\Rightarrow \dfrac{ds}{dt}=\dfrac{dA}{dt}\times \dfrac{1}{2s}\\\Rightarrow \dfrac{ds}{dt}=-49\times \dfrac{1}{13}\\\Rightarrow \dfrac{ds}{dt}=-3.769\ m/min[/tex]
The rate of change of the sides of the square is -3.769 m/min
A student measures the mass of a 1.0 kg standard bar. He obtains measurements of 0.77 kg, 0.78 kg, and 0.79 kg. Which describes his measurements
Complete question
A student measures the mass of a 1.0 kg standard bar. He obtains measurements of 0.77 kg, 0.78 kg, and 0.79 kg. Which describes his measurements
a)precise but not accurate
b)accurate but not precise
c)neither precise nor accurate
d)both precise and accurate
Answer:
The measurement is precise but not accurate
Explanation:
A measurement can either be precise or accurate.
A Precise measurement describes how close the measured values are to each other.An accurate measurement describes how close a measured value is to the true value.In this question, the measured values (0.77 kg, 0.78 kg and 0.79 kg) are far from the true value (1.0 kg), therefore the measurement is not accurate.
However, the measured values (0.77 kg, 0.78 kg and 0.79 kg) are close to each other, therefore the measurement is precise.
Therefore the correct option is 'a' the measurement is precise but not accurate
Answer:
precise but not accurate
Explanation:
precise but not accurate
A satellite is placed in orbit 8.52 x 105 m above the surface of Jupiter. Jupiter has a mass of 1.90 x 1027 kg and a radius of 7.14 x 107 m. Find the orbital speed of the satellite.
The orbital speed of the satellite can be found using the equations for gravitational force and centripetal acceleration. By equating these two equations, we can solve for the orbital speed. Plugging in the given values, we find that the orbital speed of the satellite is approximately 6.43 x 10^3 m/s.
Explanation:To find the orbital speed of the satellite, we can use the equation for gravitational force: F = ma, where F is the gravitational force, m is the mass of the satellite, and a is the centripetal acceleration. We can also use the equation for centripetal acceleration: a = v^2 / r, where v is the orbital speed and r is the distance between the satellite and the center of Jupiter. By equating the two equations, we can solve for v.
The gravitational force acting on the satellite is given by the formula F = G * (m1 * m2) / r^2, where G is the gravitational constant, m1 is the mass of Jupiter, and r is the distance between the satellite and the center of Jupiter.
Plugging in the values given in the question, we can solve for v:
v^2 = (G * m1) / r
v = sqrt((G * m1) / r)
Using the given values of m1 = 1.90 x 10^27 kg, r = 8.52 x 10^5 m, and the gravitational constant G = 6.67 x 10^-11 Nm^2/kg^2, we can calculate the orbital speed of the satellite:
v = sqrt((6.67 x 10^-11 Nm^2/kg^2 * 1.90 x 10^27 kg) / (8.52 x 10^5 m))
v ≈ 6.43 x 10^3 m/s
A flying saucer lifts the Physical Science building 10,000 ft into the air before discovering it is useless and discards the remains. If the building weighs 1,000,000 pounds and the ascent takes 20 seconds, what is one saucer power?
Answer:
500000000 lbft/s
Explanation:
F = Force or weight = 1000000 lbf
s = Displacement = 10000 ft
t = Time taken = 20 seconds
Work done is given by
[tex]W=Fs\\\Rightarrow W=1000000\times 10000\\\Rightarrow W=10000000000\ lb-ft[/tex]
Power is given by
[tex]P=\dfrac{W}{t}\\\Rightarrow P=\dfrac{10000000000}{20}\\\Rightarrow P=500000000\ lbft/s[/tex]
One Saucer power is 500000000 lbft/s
A car moving at 10.0 m/s crashes into a barrier and stops in 0.050 s. There is a 20.0-kg child in the car. Assume that the child’s velocity is changed by the same amount as that of the car, and in the same time period. What is the impulse needed to stop the child?
Answer:
The impulse needed to stop the child = -200 Ns
Explanation:
Impulse: This can be defined as the product of force and time of a body. The S.I unit of impulse is kgm/s or Ns
From newton's second law,
I = mΔv ................... Equation 1.
Where I = Impulse needed to stop the child, m = mass of the child, Δ = change in velocity of the child.
Given: m = 20.0 kg,
Δv = v-u where v =0 m/s, u = 10.0 m/s
Δv = 0-10 = -10 m/s.
Substituting into equation 1
I = 20(-10)
I = -200 Ns.
Thus the impulse needed to stop the child = -200 Ns
Note: The negative sign shows that the impulse act against the motion of the child
The correct impulse needed to stop the child is 200 N·s.
The impulse needed to stop the child is 16 N·s.To find the impulse needed to stop the child, we can use the formula for impulse, which is the change in momentum of an object. The momentum of an object is given by the product of its mass and velocity. Impulse is the product of the average force applied to the object and the time interval during which the force is applied. The impulse is equal to the change in momentum.
The initial momentum of the child (p_initial) is given by the mass of the child (m) multiplied by the initial velocity of the car (v_initial), since the child's velocity is assumed to be the same as that of the car. The final momentum of the child (p_final) is zero because the child comes to a stop.
Given:
- Mass of the child, m = 20.0 kg
- Initial velocity of the car (and the child), v_initial = 10.0 m/s
- Time taken to stop, Aat = 0.050 s
- The change in momentum (Aap) is:
Aap = [tex]p_final - p_initial[/tex]
Aap = [tex]0 - (m * v_initial)[/tex]
Aap = - (20.0 kg * 10.0 m/s)
Aap= - 200 kgA·m/s
The negative sign indicates that the momentum is decreasing (the child is stopping).
The impulse (J) is equal to the change in momentum:
J = Aap
J = - 200 kgA·m/s
Since impulse is a vector quantity and we are interested in the magnitude of the impulse needed to stop the child, we take the absolute value:
J = | - 200 kgA·m/s |
J = 200 kgA·m/s
Now, we can express the impulse in Newtons-seconds (NA·s) by noting that 1 kgA·m/s is equivalent to 1 NA·s:
J = 200 NA·s
However, the answer provided initially (16 NA·s) seems to be incorrect. Let's re-evaluate the calculation to ensure accuracy.
The impulse J is the change in momentum Aap over the time interval Aat. The average force F_avg applied to the child is then the impulse divided by the time interval:
F_avg = J / Aat
Rearranging for J gives:
J = F_avg / Aat
Since we know the change in momentum Aap is equal to the impulse J, we can write:
J = Aap = m * Aav
The change in velocity Aav of the car (and thus the child) is the final velocity [tex]v_final[/tex]minus the initial velocity [tex]v_initial[/tex]. Since the car stops, [tex]v_final[/tex]= 0, and Aav is simply [tex]-v_initial[/tex].
Aav = v[tex]_final - v_initial[/tex]
Aav = 0 - 10.0 m/s
Aav= - 10.0 m/s
Now we can calculate the impulse needed to stop the child:
J = m * Aav
J = 20.0 kg * (- 10.0 m/s)
J = - 200 kgA·m/s
Taking the magnitude:
J = | - 200 kgA·m/s |
J = 200 kgA·m/s
Since 1 kgA·m/s is equivalent to 1 NA·s, the impulse in Newtons-seconds is:
J = 200 NA·s
This confirms that the initial answer provided (16 N·s) is indeed incorrect, and the correct impulse needed to stop the child is 200 N·s.
A ball of mass 0.165 kg is dropped from rest from a height of 1.25 m. It rebounds from the floor to reach a height of 0.940 m. What impulse was given to the ball by the floor?
Answer:
I = 1.525 kg.m/s
Explanation:
given,
mass of the ball = 0.165 Kg
height of drop, h = 1.25 m
ball rebound and reach to height, h' = 0.940 m
impulse = ?
using conservation of energy
Potential energy is converted into kinetic energy
[tex]mgh = \dfrac{1}{2}mv^2[/tex]
[tex]v=\sqrt{2gh}[/tex]
[tex]v=\sqrt{2\times 9.8 \times 1.25}[/tex]
v = 4.95 m/s
velocity of the ball after rebound
again using conservation of energy
[tex]mgh = \dfrac{1}{2}mv'^2[/tex]
[tex]v'=\sqrt{2gh}[/tex]
[tex]v'=\sqrt{2\times 9.8 \times 0.94}[/tex]
v' = 4.29 m/s
impulse is equal to change in momentum
I = m ( v' - v )
I = 0.165 x ( 4.29 - (-4.95))
I = 1.525 kg.m/s
The time spent on design will vary, dependent on the complexity of the problem. Why is it important to give the design process adequate time?
Answer:To ensure significant dialogue which will guarantee that the needed Products meets specifications
It will help to develop a better Operational model for the users.
Explanation: The design phase is one of the most critical phase in product development,it is in this phase that the product structure, contents and specifications are put into action. It is necessary that the end users have a significant time to dialogue with the project or product development team to guarantee that the end product meets specifications.
It is also necessary to spent adequate time in order to make the product user friendly (easy to operate and maintain).
As a spherical ammonia vapor bubble rises in liquid ammonia, its diameter changes from 1 cm to 3 cm. Calculate the amount of work produced by this bubble, in kJ, if the surface tension of ammonia is 0.04 N/m.
Answer:
So amount of work produced will be [tex]10{-4}J[/tex]
Explanation:
We have given diameter of ammonia bubble is changes from 1 cm to 3 cm
So radius changes from 0.5 cm to 1.5 cm
Surface area of bubble[tex]=4\pi r^2[/tex]
So change in area of bubble [tex]=4\pi (0.015^2-0.005^2)=8\times 3.14\times (0.015^2-0.005^2)=0.00251m^2[/tex]
Surface tension of ammonia = 0.04 N/m
So work done will be [tex]Work\ done=surface\ tension\times change\ in\ area=0.04\times 0.00251= 10^{-4}J[/tex]
In terms of conservation of momentum explain why it is not a good idea to jump from a rowboat to a dock that seems just within jumping distance, if the boat is not tied to the dock.
Answer:
Explanation:
It is dangerous to jump from rowboat to a dock because you may end up hurting yourself.
As momentum is conserved, the momentum of the boat after you jump off from boat is equal and opposite to your momentum. So you end up landing far behind than you expected and hurt yourself.
Explains why jumping from a rowboat to a dock violates the conservation of momentum principle, leading to potential boat instability.
In terms of conservation of momentum, when you jump from a rowboat to a dock, your momentum changes suddenly as you leave the boat, but the boat still retains its momentum. This violates the principle of conservation of momentum, which states that in the absence of external forces, the total momentum of a system remains constant.
For instance, if the rowboat (system) and you initially have zero momentum while at rest, the moment you jump, your momentum changes, but the boat will move in the opposite direction to compensate, due to Newton's third law of motion, causing instability and potentially capsizing the boat.
At an outdoor market, a bunch of bananas attached to the bottom of a vertical spring of force constant 16.0 N/m is set into oscillatory motion with an amplitude of 20.0 cm. It is observed that the maximum speed of the bunch of bananas is 44.0 cm/s. What is the weight of the bananas in newtons?
Answer:
32.4289 N
Explanation:
A = Amplitude = 20 cm
[tex]v_m[/tex] = Maximum velocity = 44 cm/s
k = Spring constant = 16 N/m
g = Acceleration due to gravity = 9.81 m/s²
m = Mass of object
Maximum velocity is given by
[tex]v_m=A\omega[/tex]
Angular velocity is given by
[tex]\omega=\sqrt{\dfrac{k}{m}}[/tex]
[tex]v_m=A\sqrt{\dfrac{k}{m}}\\\Rightarrow m=\dfrac{A^2k}{v_m^2}\\\Rightarrow m=\dfrac{0.2^2\times 16}{0.44^2}\\\Rightarrow m=3.3057\ kg[/tex]
Weight is given by
[tex]W=mg\\\Rightarrow W=3.3057\times 9.81\\\Rightarrow W=32.4289\ N[/tex]
The weight of the bananas is 32.4289 N
The velocity of a 200 kg object is changed from 5 m/s to 25 m/s in 50 seconds by an applied constant force.
a. What change in momentum does the force produced?
b. What is the magnitude of the force?
Explanation:
Force is given by rate of change of momentum.
Mass of object = 200 kg
Initial velocity = 5 m/s
Final velocity = 25 m/s
a) Change in momentum = 200 x 25 - 200 x 5
Change in momentum = 4000 kg m/s in the direction of motion
b) Time taken = 50 s
Rate of change of momentum = Change in momentum ÷ Time
Rate of change of momentum = 4000 ÷ 50
Rate of change of momentum = 80 N
Force = 80 N
Magnitude of the force is 80 N
Suppose you kick a soccer ball straight up to a height of 10 meters. Which of the following is true about the gravitational potential energy of the ball during its flight?
A) The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point.
B) The ball's gravitational potential energy is always the same.
C) The ball's gravitational potential energy is greatest at the instant the ball leaves your foot.
D) The ball's gravitational potential energy is greatest at the instant it returns to hit the ground.
Answer:
A) The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point.
Explanation:
Suppose you kick a soccer ball straight up to a height of 10 meters. Which of the following is true about the gravitational potential energy of the ball during its flight?
A) The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point. (true)
B) The ball's gravitational potential energy is always the same. (false)
because the gravitational potential energy is changed as the height changed.
C) The ball's gravitational potential energy is greatest at the instant the ball leaves your foot. (false)
Because The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point.
D) The ball's gravitational potential energy is greatest at the instant it returns to hit the ground. (false)
The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point. not when return to the ground
Final answer:
The gravitational potential energy of a soccer ball kicked straight up is A) The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point.
Explanation:
If you kick a soccer ball straight up to a height of 10 meters, the gravitational potential energy of the ball is greatest at the instant when the ball is at its highest point. At the highest point, all the energy in the system is gravitational potential energy.
This is because gravitational potential energy is calculated by the formula PE = mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height above the reference point, which in this case is the ground. At the ball's highest point, the h value is at its maximum of 10 meters. Therefore, the correct answer to the question is A) The ball's gravitational potential energy is greatest at the instant when the ball is at its highest point.
A cue ball initially moving at 3.4 m/s strikes a stationary eight ball of the same size and mass. After the collision, the cue ball’s final speed is 0.94 m/s at an angle of θ with respect to its original line of motion?Find the eight ball’s speed after the col- lision. Assume an elastic collision (ignoring friction and rotational motion).
Answer in units of m/s.
Answer:
speed of eight ball speed after the collision is 3.27 m/s
Explanation:
given data
initially moving v1i = 3.4 m/s
final speed is v1f = 0.94 m/s
angle = θ w.r.t. original line of motion
solution
we assume elastic collision
so here using conservation of energy
initial kinetic energy = final kinetic energy .............1
before collision kinetic energy = 0.5 × m× (v1i)²
and
after collision kinetic energy = 0.5 × m× (v1f)² + 0.5 × m× (v2f)²
put in equation 1
0.5 × m× (v1i)² = 0.5 × m× (v1f)² + 0.5 × m× (v2f)²
(v2f)² = (v1i)² - (v1f)²
(v2f)² = 3.4² - 0.94²
(v2f)² = 10.68
taking the square root both
v2f = 3.27 m/s
speed of eight ball speed after the collision is 3.27 m/s
Final answer:
To find the eight ball's speed after the collision, we can use the principle of conservation of momentum and the fact that the collision is elastic. By solving equations for momentum and kinetic energy, we can determine the final velocity of the eight balls. Given the initial velocity and final velocity of the cue ball, and assuming equal masses for both balls, we can substitute these values and solve for the final velocity of the eight balls.
Explanation:
To find the eight ball's speed after the collision, we can use the principle of conservation of momentum. In an elastic collision, the total momentum before the collision is equal to the total momentum after the collision. Since the cue ball initially strikes the stationary eight ball, the total initial momentum is the momentum of the cue ball, and the total final momentum is the momentum of both the cue ball and the eight ball after the collision.
Let's denote the mass of both balls as 'm'. The initial momentum of the cue ball is given by: p_initial = m * v_cue (where v_cue is the initial velocity of the cue ball).
The final momentum of both balls is given by: p_final = m * v_cue_final + m * v_eight_final (where v_cue_final is the final velocity of the cue ball and v_eight_final is the final velocity of the eighth ball).
Since the collision is elastic, there is no loss of kinetic energy, so the total kinetic energy before the collision is equal to the total kinetic energy after the collision. The initial kinetic energy of the cue ball is given by: KE_initial = (1/2) * m * v_cue^2.
The final kinetic energy of both balls is given by: KE_final = (1/2) * m * v_cue_final^2 + (1/2) * m * v_eight_final^2.
We can solve these equations to find the final velocity of the eight balls. Given that the cue ball's initial velocity (v_cue) is 3.4 m/s, its final velocity (v_cue_final) is 0.94 m/s at an angle θ (concerning its original line of motion), and the masses of both balls are the same, we can substitute these values into the equations and solve for the final velocity of the eight ball.
Consider two thin disks, of negligible thickness, of radiusR oriented perpendicular to thex axis such that the x axis runs through thecenter of each disk. The disk centered at x=0 has positive charge density eta, and the disk centered at x=a has negative charge density -\eta, where the charge density is charge perunit area. What is the magnitude E of the electric field at the point on thex axis with x coordinate a/2? For what value of the ratio R/a of plate radius to separation between the plates does the electric field at the point x=a/2 on the x axis differ by 1 percent from the result η/ϵ for infinite sheets?
Complete question
The complete question is shown on the first and second uploaded image
Answer:∈
Answer to first question is shown on the second uploaded image.
Part B the Answer is:
The ratio [tex]\frac{R}{a}[/tex] is evaluated to be 49.99
Explanation:
The explanation is shown on the third ,fourth and fifth image.
The ratio [tex]\frac{R}{a}[/tex] is "49.9975".
Ratio Calculation:For the last part, we should have
[tex]\to E = 0.99 \frac{\eta }{\varepsilon_0 }[/tex]
Therefore we should have
[tex]\to \frac{\eta}{\varepsilon_0}(1-\frac{1}{\sqrt{ (\frac{2R}{a})^2+1}}) = 0.99 \frac{\eta}{\varepsilon_0}[/tex]
[tex]\to (1-\frac{1}{\sqrt{ (\frac{2R}{a})^2+1}}) = 0.99 \\\\\to 1-0.99= \frac{1}{\sqrt{ (\frac{2R}{a})^2+1}}\\\\ \to 0.01= \frac{1}{\sqrt{ (\frac{2R}{a})^2+1}} \\\\\to \sqrt{ (\frac{2R}{a})^2+1}= 100\\\\\to (\sqrt{ (\frac{2R}{a})^2+1})^2= 100^2\\\\\to (\frac{2R}{a})^2+1= 10000\\\\\to (\frac{2R}{a})^2= 10000-1\\\\\to (\frac{2R}{a})^2= 9999\\\\\to \frac{2R}{a}= 99.9995\\\\\to \frac{R}{a}= 49.9975\\\\[/tex]
Note:
The given question is incomplete so, the complete question is defined in the attached file please find it.Find out more information about the sheet here:
brainly.com/question/8752535
A dipole of moment 0.5 e nm is placed in a uniform electric field with a magnitude of 8 times 104 N/C. What is the magnitude of the torque on the dipole when?
a) the dipole is parallel to the electric field.
b) the dipole is perpendicular to the electric field.
c) the dipole makes an angle of 30 degrees with the electric field.
d) Find the potential energy of the dipole in the electric field for each case. theta = 0 degrees (parallel).
Answer with Explanation:
We are given that
Dipole moment=[tex]0.5 e nm=0.5\times 1.6\times 10^{-19}\times 10^{-9}=0.8\times 10^{-28}[/tex]C-m
Because [tex]1 e=1.6\times 10^{-19} C[/tex]
[tex]1 nm=10^{-9} m[/tex]
[tex]a^x\cdot a^y=a^{x+y}[/tex]
Magnitude of electric field,E=[tex]8\times 10^4[/tex] N/C
a.We have to find the magnitude of torque on the dipole when
dipole is parallel to the electric field
i.e[tex]\theta=0[/tex]
We know that
[tex]\tau=PEsin\theta[/tex]
Substitute the values then we get
[tex]\tau=0.8\times 10^{-28}\times 8\times 10^{4} sin0=0[/tex]
Because sin 0=0
[tex]\tau=0[/tex]
b.[tex]\theta=90^{\circ}[/tex]
[tex]\tau=0.8\times 10^{-28}\times 8\times 10^4sin90[/tex]
By using [tex]sin90^{\circ}=1[/tex]
[tex]\tau=6.4\times 10^{-28+4}=6.4\times 10^{-24}Nm[/tex]
[tex]\tau=6.4\times 10^{-24}[/tex]Nm
c.[tex]\theta=30^{\circ}[/tex]
[tex]\tau=0.8\times 10^{-28}\times 8\times 10^4sin 30[/tex]
[tex]\tau=6.4\times 10^{-24}\times \frac{1}{2}[/tex] Nm
By using [tex] sin30^{\circ}=\frac{1}{2}[/tex]
[tex]tau=3.2\times 10^{-24} Nm[/tex]
d.Potential energy, U=[tex]-PEcos\theta[/tex]
[tex]\theta=0[/tex]
[tex]U=-0.8\times 10^{-28}\times 8\times 10^4cos 0=-6.4\times 10^{-28}J[/tex]
Because cos 0degree=1
By having the p, E, and anglёs, we can calculate the τ value and the U values. a) 0 Nm, b) 6.4x10⁻²⁴ Nm, c) 3.2x10⁻²⁴ Nm. d) U = 6.4x10⁻²⁴, U = 0, U = 5.57x10⁻²⁴
First, we need to change the units of the given dip0lё momёnt, p.
The result is
p = 0.8 x 10 ⁻²⁸ Cm
Now we can calculate the t0rquё values.
T0rque, t = p x E x sёn θ
The results are
a) τ = 0 Nmb) τ = 6.4x10⁻²⁴ Nmc) τ = 3.2x10⁻²⁴ Nmd)p0tёntial energy, U = p x E x c0s θ
U = 6.4x10⁻²⁴U = 0U = 5.57x10⁻²⁴
You will find the complete explanation in the attached files
You can learn more about t0rquё and p0tential energy at
https://brainly.com/question/258149
https://brainly.com/question/21288807
Based on observations, the speed of a jogger can be approximated by the relation v 5 7.5(1 2 0.04x) 0.3, where v and x are expressed in mi/h and miles, respectively. Knowing that x 5 0 at t 5 0, determine (a) the distance the jogger has run when t 5 1 h, (b) the jogger’s acceleration in ft/s2 at t 5 0, (c) the time required for the jogger to run 6 mi.
a) The jogger has run approximately 7.978 miles after 1 hour. b) The jogger's acceleration at t = 0 is approximately 0.41 ft/s^2. c) The equation does not provide a direct relationship between distance and time, so we cannot determine the time required to run 6 miles.
(a) To find the distance the jogger has run when t = 1 h, we need to substitute t = 1 into the given equation. Plugging in t = 1, we have: v = 7.5(1 + 2(0.04(1)))^0.3. Simplifying this expression, we get v ≈ 7.5(1.08)^0.3. Evaluating this expression, we find v ≈ 7.978 mi/h. To find the distance, we multiply the speed by the time: d = v × t = 7.978 × 1 = 7.978 mi.
(b) The acceleration can be found by taking the derivative of the velocity equation with respect to time. Differentiating the given equation, we have dv/dt = 7.5(1 + 2(0.04x))^(-0.7) × 2(0.04). Substituting t = 0 into this expression, we get: a = 7.5(1 + 2(0.04(0)))^(-0.7) × 2(0.04). Simplifying this expression, we find a ≈ 0.28 mi/h^2. To convert this to ft/s^2, we multiply by 5280 ft/mi and divide by 3600 s/h: a = 0.28 × 5280 / 3600 ≈ 0.41 ft/s^2.
(c) To find the time required for the jogger to run 6 mi, we need to solve the equation v = 7.5(1 + 2(0.04x))^0.3 for t. Plugging in d = 6 and v = 7.5(1 + 2(0.04x))^0.3, we can solve for t. However, the given equation does not provide a direct relationship between distance and time, so we cannot solve it.
You have two identical needles. One of them is magnetized and the other is not. How, without the use of anything besides the two needles, could you tell which is magnetized?
Answer:
By suspending the needles on in the air, the needle which orients itself in the north-south direction is magnetized
Explanation:
The only method to check a magnet individually without the help of another magnet or magnetic substance on the earth is by suspending it in the air which orients itself in the direction of the magnetic field of the earth.This is when the non-magnetic needle will not align itself as the magnetic needle does in the magnetic field of the earth.Which sentence below describes a contact force? A) A baseball bat hits a ball B) A book falls to the floor C) A leaf floats in the air and falls to the ground D) A magnetic force pulls a paper clip toward a magnet Please help!!!
A baseball bat hits a ball is an example of contact force.
Option A.
Explanation:Contact force is defined as those forces which are acting between two bodies by actually touch between two bodies.
In case of the book falling to ground, the force acting is the gravitational force. Gravitational force acts even when two bodies aren't in contact. So its a non contact force.
Similar is the condition of the leaf and ground where the gravitational force acts.
The magnetic force between the paper clip and the magnet is also non contact force, which acts even when two bodies aren't in contact.
But the bat hitting the ball is having direct contact between the two bodies, and their contact is what makes the ball fly off. So its a contact force.
Contact force is the type of force that occurs when the external force act on the system act physically. A baseball bat hitting a ball is the right example of contact forces.
What is contact force?Any force that requires touch is referred to as a contact force. The majority of apparent interactions between macroscopic groupings of matter are caused by contact forces.
Contact forces are used in everyday circumstances. For example, a baseball bat hits a ball.
Hence a baseball bat hitting a ball is the right example of contact forces.
To learn more about the contact force refer to the link;
https://brainly.com/question/62568
Young David who slew Goliath experimented with slings beforetackling the giant. He found that he could revolve a sling oflength 0.600 m at the rate of9.00 rev/s. If he increased the lengthto 0.900 m, he could revolve the slingonly 7.00 times per second.(a) What is the speed of the stone for eachrate of rotation?1 m/s at 9.00 rev/s2 m/s at 7.00 rev/s(b) What is the centripetal acceleration of the stone at9.00 rev/s?3 m/s2(c) What is the centripetal acceleration at 7.00 rev/s?4 m/s2
Answer:
(a) velocity at 9 rev/s is 34.3m/s and the velocity at 7rev/s is 40.4 m/s. These were values can be gotten by using the formula v = 2(pi)R/T. Where T is the period. T = 1/w(angular velocity).
(b) acceleration at 9.0rev/s is 1961 m/s²
(c) acceleration at 7.0rev/s is 1814 m/s²
These values can be gotten by using the formula a = v²/R
Explanation:
The full solution can be found in the attachment below.
Thank you for reading.
Final answer:
To find the speed of the stone for each rate of rotation, use the formula Speed = (2 * pi * radius * rate of rotation). The centripetal acceleration at 9.00 rev/s is approximately 3.1 m/s^2 and at 7.00 rev/s is approximately 3.9 m/s^2.
Explanation:
To find the speed of the stone for each rate of rotation, we can use the formula:
Speed = (2 * pi * radius * rate of rotation)
Using a length of 0.600 m and a rate of rotation of 9.00 rev/s, the speed of the stone is approximately 3.4 m/s. Using a length of 0.900 m and a rate of rotation of 7.00 rev/s, the speed of the stone is approximately 4.9 m/s.
The centripetal acceleration of the stone at 9.00 rev/s can be found using the formula:
Centripetal acceleration = (speed)^2 / radius
Substituting the values, we get a centripetal acceleration of approximately 3.1 m/s^2.
The centripetal acceleration at 7.00 rev/s can be found using the same formula. Substituting the values, we get a centripetal acceleration of approximately 3.9 m/s^2.
A cue ball initially moving at 2.5 m/s strikes a stationary eight ball of the same size and mass. After the collision, the cue ball’s final speed is 1.2 m/s at an angle of ? With respect to its original line of motion.Find the eight ball’s speed after the collision. Assume an elastic collision (ignoring friction and rotational motion).Answer in units of m/s
Final answer:
To find the speed of the eight ball after an elastic collision with the cue ball in motion, apply conservation laws of momentum and kinetic energy.
Explanation:
A cue ball initially moving at 2.5 m/s strikes a stationary eight ball of the same size and mass. After the collision, the cue ball’s final speed is 1.2 m/s at an angle of ? With respect to its original line of motion. To find the eight ball’s speed after the collision, we can apply the principles of conservation of momentum and conservation of kinetic energy.
Let's denote the velocities: V1 (initial cue ball velocity), V2 (initial eight ball velocity), V1' (final cue ball velocity), and V2' (final eight ball velocity). Considering an elastic collision, where momentum and kinetic energy are conserved, we can set up equations to solve for V2'.
By using the conservation laws, we can determine that the eight ball's speed after the collision is approximately 2.3 m/s.
A pipe 0.770 m long and closed at one end is filled with an unknown gas. The third lowest harmonic frequency for the pipe is 750 Hz. (a) What is the speed of sound in the unknown gas?
Answer:
speed of sound in unknown gas will be 360m/sec
Explanation:
We have given length of the pipe l = 0.770 m
It is given that pipe is open at one end and closed at one end
Frequency of third harmonic f = 750
Third harmonic frequency of pipe which one end is open and one end is closed is given by
[tex]f=\frac{5v}{4L}[/tex], here v is the speed of the sound, L is the length of the pipe
So [tex]750=\frac{5v}{4\times 0.770}[/tex]
v = 360 m /sec
So speed of sound in unknown gas will be 360m/sec
In 1932, James Chadwick bombarded beryllium-9 with alpha particles. One product was a neutron. This led to the direct experimental verification of the existence of neutrons. The other product of Chadwick's nuclear reaction was carbon-12. boron-12. helium-4. nitrogen-14.
In 1932, James Chadwick proved the existence of neutrons by bombarding Beryllium-9 with alpha particles. The reaction resulted in the production of neutrons and likely also Carbon-12.
Explanation:
In the experiment conducted by James Chadwick in 1932, he bombarded a sample of Beryllium-9 with alpha particles. The reaction resulted in two products: a neutron, which was significant as it directly demonstrated the existence of neutrons, and another product. This missing product has not been mentioned in the question, but based on the options provided, one can infer that the most likely answer is Carbon-12. This was identified because the carbon-12 isotope is a stable one usually formed in nuclear reactions like Chadwick's.
Learn more about James Chadwick here:https://brainly.com/question/11833036
#SPJ11
You are on the roof of the physics building, 46.0 above the ground . Your physics professor, who is 1.80 tall, is walking alongside the building at a constant speed of 1.20m/s. If you wish to drop an egg on your professor's head, how far from the building should the professor be when you release the egg? Assume that the egg is in free fall.
There is one mistake in the question as unit of height of building is not given.So I assume it as meter.The complete question is here
You are on the roof of the physics building, 46.0 m above the ground. Your physics professor, who is 1.80 m tall, is walking alongside the building at a constant speed of 1.20 m/s. If you wish to drop an egg on your professor’s head, where should the professor be when you release the egg? Assume that the egg is in free fall.
Answer:
d=3.67 m
Explanation:
Height of building=46.0 m
First we need to find time taken by egg to reach 1.80 m above the surface
So to find time use below equation
[tex]S=vt+\frac{1}{2} gt^{2}\\ (46.0-1.80)m=(om/s)t+\frac{1}{2}(9.8m/s^{2} )t^{2}\\t=\sqrt{\frac{(46.0-1.80)m}{4.9} }\\ t=3.06s[/tex]
As velocity 1.20m/s is given and we have find time.So we can easily find the distance
So
[tex]distance=velocity*time\\d=v*t\\d=(1.20m/s)*(3.06s)\\d=3.67m[/tex]
Two wires are parallel, and one is directly above the other. Each has a length of 44.3 m and a mass per unit length of 0.0292 kg/m. However, the tension in wire A is 33.0 × 102 N, while the tension in wire B is 3.76 × 102 N. Transverse wave pulses are generated simultaneously, one at the left end of wire A and one at the right end of wire B. The pulses travel toward each other. How much time does it take until the pulses pass each other?
Answer:
0.09852 seconds
Explanation:
[tex]\mu[/tex] = Linear density = 0.0292 kg/m
[tex]T_A[/tex] = Tesnsion in string A = [tex]33\times 10^2\ N[/tex]
[tex]T_B[/tex] = Tesnsion in string B = [tex]3.76\times 10^2\ N[/tex]
t = Time taken till the pulses pass each other
Velocity of wave in a string is given by
[tex]v_A=\sqrt{\dfrac{T_A}{\mu}}\\\Rightarrow v_A=\sqrt{\dfrac{33\times 10^2}{0.0292}}[/tex]
[tex]v_B=\sqrt{\dfrac{T_2}{\mu}}\\\Rightarrow v_B=\sqrt{\dfrac{3.76\times 10^2}{0.0292}}[/tex]
[tex]Distance=Speed\times Time[/tex]
[tex]L=(v_A+v_B)t\\\Rightarrow t=\dfrac{L}{v_A+v_B}\\\Rightarrow t=\dfrac{44.3}{\sqrt{\dfrac{33\times 10^2}{0.0292}}+\sqrt{\dfrac{3.76\times 10^2}{0.0292}}}\\\Rightarrow t=0.09852\ s[/tex]
The time taken is 0.09852 seconds
Answer:
[tex]t=0.0985\ s[/tex]
Explanation:
Given:
length of each wire, [tex]l_a=l_b=44.3\ m[/tex]linear mass density of each wire, [tex]\mu_a=\mu_b=0.0292\ kg.m^{-1}[/tex]tension in wire A, [tex]T_a=3300\ N[/tex]tension in wire B, [tex]T_a=376\ N[/tex]Now, the velocity of the wave pulse in the stretched spring is given as:
FOR A:
[tex]v_a=\sqrt{\frac{T_a}{\mu_a} }[/tex]
[tex]v_a=\sqrt{\frac{3300}{0.0292} }[/tex]
[tex]v_a=336.175\ m.s^{-1}[/tex]
FOR B:
[tex]v_b=\sqrt{\frac{T_b}{\mu_b} }[/tex]
[tex]v_b=\sqrt{\frac{376}{0.0292} }[/tex]
[tex]v_b=113.476\ m.s^{-1}[/tex]
Let the distance at which the wave of A meets the wave of B be x from left then the distance from B is (44.3-x) meters.
Now the time taken is constant:
[tex]t=\frac{x}{v_a} =\frac{x-44.3}{v_b}[/tex]
[tex]\frac{x}{336.175} =\frac{x-44.3}{113.476}[/tex]
[tex]x=33.12\ m[/tex] is the distance travelled by pulse in wire A in when the pulse in the wire B meets
Now the time taken to travel this distance by pulse in wire A:
[tex]t=\frac{x}{v_a}[/tex]
[tex]t=\frac{33.12}{336.175}[/tex]
[tex]t=0.0985\ s[/tex] is the time taken by the two waves to pass each other.
An ideal gas is enclosed in a piston, and exactly 1200 J of work is done on the gas. As this happens, the internal energy of the gas increases by exactly 700 J. During this process, how much heat flows into or out of the ideal gas? Enter a positive number to indicate a heat flow into the gas or a negative number to indicate a heat flow out of the gas.
Answer:
[tex]dQ=-500J[/tex]
Explanation:
We have given work is done on the gas is 1200 J
So work done will be [tex]dW=-1200J[/tex] ( as work is done on the gas )
It is given that internal energy is increases by exactly 700 J
So [tex]dU=700J[/tex]
From thermodynamic equation [tex]dQ=dU+dW[/tex]
So [tex]dQ=700-1200=-500J[/tex]
Here negative sign indicates that heat flow out of the gas
If heat was negative then heal was flowing in the gas