Answer: Electrical and Thermal.
Explanation:
When Gerald mixes baking soda and vinegar, the materials combine to turn into a gas. What can Gerald assume occurred?
i am not explaining step by step so the answer is straight to the point. sorry i fyou wanted if an explanation.
THE ANSWER IS: A.) CHEMICAL CHANGE
When Gerald mixes baking soda and vinegar, the materials combine to turn into a gas. Its a type of chemical change.
What is chemical change?Chemical synthesis, and, alternatively, chemical breakdown into two or more separate molecules, occurs when one material reacts with another to create a new substance. These processes have been referred to as chemical change, and they are typically irreversible barring additional chemical reactions.
What is baking soda?The organic compounds sodium bicarbonate, also referred to as baking soda and bicarbonate of soda, have the formula [tex]NaHCO_{3}[/tex] . That is a salt made up of the cation sodium and the anion bicarbonate. Sodium bicarbonate ( [tex]NaHCO_{3}[/tex] ) would be a white, crystalline substance that frequently takes the form of a fine powder.
Now, it is found that when Gerald mixes baking soda and vinegar, the materials combine to turn into a gas is a kind of chemical change.
To know more about chemical change and baking soda
https://brainly.com/question/23693316
#SPJ2
What is the hydroxide concentration of a solution with a pH of 12.80?
Answer:
6.31 × 10^-2M
Explanation:
pH +pOH=14
14-12.80=1.20
10^-1.2=.0631
move the decimal two places to the right
=6.31 × 10^-2
Anouk does 150 J of work using a hammer to pull a nail out of a piece of wood, and the hammer does 105 J of work on the nail. What is the efficiency of the hammer? 1.4% 7% 70% 143%
Answer:
70%
Explanation:
105 divided by 150 equal to 0.7. then u multiply 0.7 by 100. equal 70. so its C because efficiency = (effective work)/(executed work) * 100%
hope it helped :3
Answer:
70%
Explanation:
105 divided by 150 equal to 0.7. then u multiply 0.7 by 100. equal 70. so its C because efficiency = (effective work)/(executed work) * 100%
For the quantum number lower case L = 0, how many possible values are there for the quantum number m subscrip l?
which of the following materials is necessary to stop a beta particle
Convert 30 g/L to the unit g/mL.
A) 30,000 g/mL
B) 300 g m/L
C) 0.03 g/mL
D) 0.0003 g/mL
if the burning of magnesium is incomplete how will this procedural error affect the reported mass of 1) magnesium in magnesium oxide ? explain 2) oxygen in magnesium oxide ? explain
A chemist mixes oxygen gas and hydrogen gas to form water, which is composed of one oxygen and two hydrogen atoms per molecule. What has occurred?
Answer:
A chemical change.
Explanation:
I just took the test and got it right.
Multiply the following numbers and write the answer in scientific notation: (3.45 × 107) × (6.25 × 105).
a substance has a volume of 20mL and a density of 2.5 g/mL. what is it’s mass?
0.125 g
8 g
22.5 g
50 g
A substance has a volume of 20mL and a density of 2.5 g/mL. 50 grams is its mass. Option D is correct.
What is density?The density of a substance is the amount of substance present in pe unit volume in cubic centimeters in the area and it is the ratio of mass and the volume of the substance unit is a centimeter cube.
The volume of a substance is 20mL and the density of the substance 2.5 g/mL so, the mass will be
Density = mass/ volume
Substituting the value, Mass = density × Volume
Mass = 2.5 × 20
Mass = 50 grams.
Therefore, Option D is correct. A substance has a volume of 20mL and a density of 2.5 g/mL. 50 grams is its mass.
Learn more about density, here:
https://brainly.com/question/15164682
#SPJ2
How does the amount of salt dissolve in water affect the density of water
Answer: How the amount of salt dissolve in water affect the density of water is the density of the water increases because the mass of the water increases.
Explanation:
Which of the following is the weakest? A. hydrogen bond B. polar covalent bond C. dipole interaction D. ionic bond
The answer is A. Hydrogen bond
Molecules that have nonpolar covalent bonds donot form hydrogen bonds. Strenght. Hydrogen bonds are classified as weak bonds because they are easily and rapidly formed and broken under normal biological conditions.
Hope I helped :)
-Bucky
Which of the following is the correct name for the compound MgBr2
Answer : The correct name for the compound [tex]MgBr_2[/tex] is, Magnesium bromide.
Explanation :
Ionic compound : It is defined as the compound which is formed when electron gets transferred from one atom to another atom.
Ionic compound are usually formed when a metal reacts with a non-metal.
The rules for naming the ionic compounds is given as :
The positive ion (cation) is named first.The negative ion (anion) is named next.The suffix is added at the end of the negative ion (anion). The suffix used is '-ide'.Hence, the correct name for the compound [tex]MgBr_2[/tex] is, Magnesium bromide.
What mass of iron is required to replace over from 8.00 g of silver nitrate dissolved in water
1. Ernest Rutherford discovery of radioactivity 2. James Chadwick discovery of the electron 3. Henri Becquerel discovery of the neutron 4. J.J. Thomson discovery of the atomic nucleus
Answer:
1. Ernerst Rutherford =====> Discovery of Atomic Nucleus
2. James Chadwick =====> Discovery of Neutron
3. Henri Becquerel =====> Discovery of Radioactivity
4. J.J. Thomson =====> Discovery of Electron
Explanation:
A prairie dog runs into its burrow as a coyote approaches.This behavior helps the prairie dog
Answer:
sample response: Prairie dogs create a safe home for their young by creating underground burrows, which protect them from hailstorms, blizzards, floods, droughts, and fires. The burrow contains many different chambers, including a nursery that is very deep underground. This protects the young from predators as well as changes in the temperature outside. The burrows even include observation posts where they can watch for predators.
Explanation:
1. Energy is expended when a force moves matter across a distance. True/False
2. The conservation of mass-energy and the first law of thermodynamics are synonymous. True/False
3. Temperature and thermal energy are synonymous terms. True/False
4. On the Kelvin scale, temperatures are expressed as positive values only. True/False
5. The amount of heat transfer required to change the temperature of one gram of water one degree Celsius is also known as a calorie. True/False
Which of the following is an example of applied research? Determining the components of the human genome. Studying the behavior of gorillas when raising their offspring. Finding replacement chemicals for the air-polluting chlorofluorocarbons used in machines and appliances. Working with carbon to determine its bonding characteristics.
Answer:
Finding replacement chemicals for the air-polluting chlorofluorocarbons used in machines and appliances.
Explanation:
Applied research refers to research targeted at solving a specific problem in the society. Simply put, it is a research that focuses on bringing solution to practical problems in the society.
Chloroflourocarbons(CFCs) are known to cause damage to the ozone layer. Hence any research aimed at its substitution is targeted at solving a practical problem in the society hence it is an applied research.
Calculate the standard free-energy change for the following reaction at 25 °C. Standard reduction potentials can be found here.
Since there are no given data for us to solve this problem, I will explain what a Standard Reduction Potential is. For example, if a student had an experiment and he wanted to know what is the most efficient and powerful redox reaction involving an uncommon combination of chemicals. The student would most likely record information in the Standard Reduction Potential that showed the voltage generated by the reaction in Aqueous Solution at 25 degrees Celsius and 1 atmosphere. This is a list of half reaction of ions in the solution at standard temperature and pressure.
Liquid nitrogen has different properties from gaseous nitrogen. Is it a chemical change when liquid nitrogen warms to gaseous nitrogen?
Answer:
No, because the different properties are physical while the chemical properties remain the same.
Explanation:
In Part A, we saw that the theoretical yield of aluminum oxide is 0.800 mol . Calculate the percent yield if the actual yield of aluminum oxide is 0.456 mol .
Answer:
The percent yield is 58.12 %.
Explanation:
Theoretical yield of aluminum oxide = 0.800 mol
Theoretical amount of aluminum oxide = 0.800 mol × 102 g/mol = 81.6 g
Actual or experimental yield of aluminum oxide = 0.465 mol
Experimental amount of aluminum oxide = 0.465 mol × 102 g/mol = 47.43 g
[tex]\% yield=frac{\text{Experimental yield}}{\text{Actual yield}}\times 100[/tex]
[tex]\%=\frac{47.43 g}{81.6 g}\times 100=58.12\%[/tex]
The percent yield is 58.12 %.
A scientist wished to carry out a chemical reaction in which two moles of aluminum combine with three moles of sulfur. He has 2.70 g of aluminum to react. How many grams of sulfur must he take to satisfy all the aluminum atoms?
1.51 g
2.14 g
3.41 g
4.81 g
Answer : The correct option is, 4.81 g
Explanation : Given,
Mass of aluminium = 2.70 g
Molar mass of aluminium = 26.98 g/mole
Molar mass of sulfur = 32.07 g/mole
First we have to calculate the moles of aluminium.
[tex]\text{Moles of Al}=\frac{\text{Mass of Al}}{\text{Molar mass of Al}}=\frac{2.7g}{26.98g/mole}=0.1mole[/tex]
Now we have to calculate the moles of sulfur.
According to the question,
As, 2 moles of aluminium react with 3 moles of sulfur
So, 0.1 mole of aluminium react with [tex]\frac{3}{2}\times 0.1=0.15mole[/tex] of sulfur
Now we have to calculate the mass of sulfur.
[tex]\text{Mass of sulfur}=\text{Moles of sulfur}\times \text{Molar mass of sulfur}[/tex]
[tex]\text{Mass of sulfur}=0.15mole\times 32.07g/mole=4.81g[/tex]
Therefore, the mass of sulfur he take must be, 4.81 g
The phase change in which a substance changes from a liquid to a solid is A. freezing. B. melting. C. sublimation. D. condensation.
freezing. Think of what happens when you put water in the freezer
Knowing the solubility of an unknown substance in water can help to identify what it is. true or false
TRUE. Knowing the solubility of an unknown substance in water can indeed help identify it, as different substances have various solubility levels and behaviours. Electrolytes, which dissolve to yield ions, their temperature dependency, and equilibrium conditions can give further hints to the substance's identity.
Explanation:The statement that knowing the solubility of an unknown substance in water can help to identify what it is, is true. Solubility can be defined as the maximum concentration of a substance that can be achieved under specified conditions in a solvent like water. Different substances have different levels of solubility, ranging from insoluble to sparingly soluble, to soluble and to miscible. Substances that dissolve to yield ions are called electrolytes, and their ionization when dissolved also varies, offering further clues to their identity. For example, soluble ionic substances and strong acids ionize completely and are strong electrolytes, while weak acids and bases ionize to a small extent and are weak electrolytes. Nonelectrolytes do not produce ions when dissolved in water. Also, considering the temperature dependency of solubility and the equilibrium conditions, we can identify the substance based on its solubility behavior.
Learn more about Solubility here:https://brainly.com/question/28170449
#SPJ3
An s sublevel is represented by the quantum number
What is the value of in a spontaneous reaction?
Consider the reaction below. C2H4(g) + H2(g) to C2H6(g) Which change would likely cause the greatest increase in the rate of the reaction?
a decrease temperature and decrease pressure
b increase temperature and decrease pressure
c decrease temperature and increase pressure
d increase temperature and increase pressure
Answer: Option (d) is the correct answer.
Explanation:
In the given reaction, [tex]C_{2}H_{4}(g) + H_{2}(g) \rightarrow C_{2}H_{6}(g)[/tex] greatest increase in rate of reaction only occur when we increase the temperature and also increase the pressure.
This is because increase in pressure will bring the molecules closer to each other whereas increase in temperature will help in more number of collisions between reactant molecules.
Thus, this will lead to increase in formation of products. Hence, we can conclude that rate of reaction will increase with increase in temperature and increase in pressure.
a cylinder rod formed from silicon is 46.0cm long and has a mass of 3.10kg. The density of silicon is 2.33g/cm3. what is the diameter of the cylinder?
1.What does the Law of Conservation of Energy tells us?
2.Give an example of 1 way that heat is transferred in your home by conduction, convection and radiation.
3.What is the difference between renewable and nonrenewable resources?
4. Energyville has run out of fossil fuels and is in an energy crisis. What is one type of renewable energy source that you might recommend to the mayor of Energyville and why do you think that it should be considered?
5. Develop an action plan that includes one specific way that you can conserve energy in your own home.
Final answer:
The Law of Conservation of Energy highlights the transformation, not the depletion, of energy. In homes, heat transfers via conduction, convection, and radiation. Solar energy is advised for Energyville for its renewable qualities, while swapping to LED lights at home conserves energy.
Explanation:
The Law of Conservation of Energy teaches us that energy cannot be created or destroyed, only transformed from one form to another. This principle is fundamental in understanding how energy interacts and transforms in the universe.
Conduction: Heat moving through the walls of your house.
Convection: Warm air circulating inside a room.
Radiation: Heat from the sun warming your home's surfaces.
Renewable vs Nonrenewable Resources: Renewable resources, such as solar and wind, can be replenished over time and have lower environmental impacts, whereas nonrenewable resources, like coal and oil, are finite and typically more polluting.
For Energyville, I recommend solar energy as a renewable source due to its accessibility, decreasing cost, and low environmental impact compared to other energy sources.
One way to conserve energy at home is to replace incandescent bulbs with LED lights, which use less energy and last longer, significantly reducing energy consumption and costs.
Which of these is a major source of organic compounds? petroleum coal natural gas all of these
Answer: The correct answer is all of these.
Explanation:
Organic compounds are defined as the chemical compounds where one or more carbon atoms are covalently bonded to other atoms of hydrogen, oxygen or nitrogen.
They occur naturally in nature and the main sources of these organic compounds are petroleum, coal and natural gases.
Petroleum are the naturally occurring substances which contain organic compounds in the form of gases, liquid or semi-solid. Thus, they are a major source of organic compound.
Coal is also a form of fossil fuel which are the major source of organic compound.
Natural gas contains hydrocarbons and also is the major source of organic compounds.
Thus, the correct answer is all of these.