D - are more organized
Answer: Are less organized
Explanation:
The formation of a solid has to do with a very ordered arrangement of molecules in a regular repeating pattern. The arrangement of molecules must be neat enough to allow close packing of the ordered arrangement. Ionically bonded species have a neat arrangement of oppositely charged ion pairs. This accounts for their abundant existence in the solid state. There is less order in the packing of covalent molecules as they as mostly held by weak intermolecular forces. Hence they exist mostly as liquids and gases.
In the reaction: CH3COO-+NH4+----------CH3COOH+NH3 what is the reactant acid and its conjugate base?
In the given reaction, the reactant acid is NH4+ (ammonium ion) and its conjugate base is NH3 (ammonia).
Explanation:In the reaction CH3COO- + NH4+ → CH3COOH + NH3, the reactant acid is NH4+ (ammonium ion) and its conjugate base is NH3 (ammonia). The proton donor or acid in the reactants is NH4+ as it loses a proton to become its conjugate base, NH3. On the other side, CH3COO- (acetate ion) gains a proton in the reaction to form CH3COOH (acetic acid), so CH3COO- is the conjugate base and CH3COOH is its corresponding acid in the reaction.
When identifying acids and bases in such reactions, one should look for the species that donates a proton and the species that accepts a proton. The donor is the acid and after donating a proton it becomes the conjugate base. Similarly, the acceptor is initially a base and becomes the conjugate acid after accepting a proton.
Analyze the bonds of CCl4. What is the shape of the CCl4 molecule? Is it symmetrical? Does this mean that the CCl4 molecule is polar or nonpolar?
C-Cl bond is polar.
As Cl is more electronegative than C,
Cl pulls the shared electrons towards its side making the C-Cl bond polar.
Polar meaning C gets a partial positive charge and Cl gets a partial negative charge. Thus C-Cl bond becomes polar.
CCl4 molecule is tetrahedral.
And its shape is symmetrical.
That means its similar on all corners or all planes and it can be cut into equal halves from any plane.
C-Cl bond is polar.But the C-Cl polairty gets cancelled out as its pulled equally from all sides.
Since the molecule is symmetrical CCl4 is non polar.
The CCl4 molecule has polar covalent bonds but is symmetrical in shape, making it nonpolar. As a nonpolar molecule, CCl4 is hydrophobic and has low reactivity with polar substances.
Explanation:The CCl4 molecule consists of one carbon atom bonded to four chlorine atoms. The bonds in CCl4 are polar covalent in nature because chlorine is more electronegative than carbon. However, the molecule is symmetrical in shape, with the carbon atom at the center and the four chlorine atoms surrounding it in a tetrahedral arrangement.
Due to its symmetrical shape, the CCl4 molecule is nonpolar. In a nonpolar molecule, the distribution of charges is balanced, meaning there is no separation of positive and negative charges. This is because the individual bond dipoles cancel each other out, resulting in a net dipole moment of zero.
The nonpolarity of CCl4 makes it hydrophobic, meaning it does not dissolve in water. It also has low reactivity with other polar substances, making it useful in certain applications such as as a cleaning solvent or refrigerant.
Learn more about polarity here:https://brainly.com/question/33242453
#SPJ6
True or false climatologist use weather balloon stethoscope and satellite
What is the electronegativity difference in AIF3?
AlF3 is ionic due to the metal and non metal combination. Well AlCl3 also has the same combination but the difference in electronegativity between Al and Cl is very minute causing Al to assume a covalent character. ... Electronegativity is the tendency of an atom to attract a bonding pair of electrons to itself.
What is the empirical formula of a compound that breaks down into 4.12g of N and 0.88g of H? N 5 H NH 3 NH 4 N 4 H
please explain answer
The emperical formula can be calculated as follows:
mass : 4.12g of N and 0.88g of H
moles: 4.12g/14.007 and 0.88g/1.008
moles: 0.294 and 0.873
moles/smallest number: (gives the ratio of atoms)
0.294/0.294 and 0.873/0.294
1 and 2.969
1 and 3
The simplest ratio of N : H is 1 : 3
Hence the emperical formula is NH3
Explanation:
1. The emperical formula can be found by getting the simplest ratio of atoms in a molecule.
2. To get the simplest ratio of atoms we find out the number of moles of each atoms in it.
3. From the number of moles of atoms we can find the simplest ratio of each atom by dividing the number of moles by the smallest number.
Acids feel slick or soapy and usually have a bitter taste.
True or False
True, as an acid is soap which is slick and tastes bitter.
Yes, true.
Acids have a bitter taste because of the presence of alkali...
Energy transfer by convection is usually restricted to what type of substance? A. Solids only
B. Liquids only
C. Gases only
D. Fluids only
My thought would be B) gases.
I could be wrong but that's what i'd say
Answer:
D. Fluids
Explanation:
Consider the single atoms of the elements listed. Which single atom would require the largest amount of energy to remove its outermost electron? A) Ar B) Cl C) Mg D) Na
Answer: A) Ar
Explanation: Argon [Ar] has an atomic no of 18 and the electronic configuration is:
Ar :[tex]1s^22s^22p^63s^23p^6[/tex]
Chlorine [Cl] has atomic no of 17 and thus the electronic configuration is :
Cl :[tex]1s^22s^22p^63s^23p^5[/tex]
Magnesium [Mg] has atomic no of 12 and thus the electronic configuration is :
Mg :[tex]1s^22s^22p^63s^2[/tex]
Sodium has atomic no of 11 and thus the electronic configuration is :
Cl :[tex]1s^22s^22p^63s^1[/tex]
As we move across a period the number of electrons are being added to the same shell but the number of protons increases, thus the electrons are being tightly held and thus the atomic radius keeps on decreasing.
Thus the smallest atom would have a tightly bound electron nearer to the nucleus. As argon is the last element of the period, it is the smallest in the period and thus largest amount of energy will be required to remove the outermost electron.
Answer: Option (A) is the correct answer.
Explanation:
The energy necessary to remove an electron from a gaseous atom or ion is known as ionization energy.
This means that smaller is the size of an atom more amount of energy has to be supplied to it in order to remove the valence electron. This is because in small atom or element there will be strong force of attraction between the nucleus and electrons.
So, high amount of energy has to be supplied to remove the valence electrons.
For example, argon (Ar) is the smallest element out of the given options and also being a noble gas it is stable in nature.
Therefore, largest amount of energy has to be supplied to argon to remove its valence electron.
Thus, we can conclude that Ar atom would require the largest amount of energy to remove its outermost electron.
What orientation are the Sun and Moon in to create high tides? Low tides?
When the sun, moon, and Earth are in alignment (at the time of the new or full moon), the solar tide has an additive effect on the lunar tide, creating extra-high high tides, and very low, low tides—both commonly called spring tide
High tides occur during spring tides when the Sun, Earth, and Moon are aligned, either during new or full moon phases. Low tides occur during neap tides when the Sun and Moon are at right angles with respect to the Earth, typically during the moon's first and third quarters.
Tides are mostly affected by the gravitational pull of the Moon and the Sun on Earth's oceans. High tides, known as spring tides, occur when the Sun, Earth, and Moon are in a straight line. This alignment can happen during the new moon or full moon phases.
Conversely, low tides, referred to as neap tides, occur when the gravitational forces of the Sun and the Moon are perpendicular to each other, which takes place during the first and third quarters of the Moon's phases.
During spring tides, the gravitational forces of the Sun and the Moon combine to create higher-than-average high tides and lower-than-average low tides. During neap tides, the Sun and the Moon's gravitational forces offset each other, resulting in tides that are not as extreme. Therefore, high tides are strongest when the Sun and the Moon are aligned, while low tides are weakest when the Sun is at 90° to the Earth-Moon alignment.
A gas with a volume of 100 mL at 80 °C is heated until its volume is 400 mL. What is the new temperature of the gas if the pressure is unaltered?
Charles law states a proportional relationship between volume and temperature.
[tex]\frac{V_{1} }{T_{1} } =\frac{V_{2} }{T_{2} }[/tex]
V1= 100mL=0.1L
V2=400mL=0.4L
T1=80'c+273=353K
T2=?
T2=1412K-273=1139'C
A 10.0 g ice cube is placed into 250 g of water with an initial temperature of 20.0 C. If the water drops to a temperature of 16.8 C, has a specific heat of 4.18 J/g*K, what is the enthalpy of fusion of the ice. Ignore the fact that the ice, once melted, has to be heated again.
the mass of ice taken = 10 g
the mass of water = 250 g
initial temperature of water = 20 C
the final temperature of water = 16. 8 C
specific heat of water = 4.18 J/g*K
the heat absorbed by ice to melt = heat loss by water
heat loss by water = mass X specific heat of water X change in temperature
heat loss by water = 250 X 4.18 X (20-16.8) = 3344 Joules
heat gained by ice = 3344 J
heat gained by ice = enthalpy of fusion X moles of ice
moles of ice = mass / molar mass = 10 / 18 = 0.56 moles
enthalpy of fusion = 3344 / 0.56 = 5971.43 J / mole
A 10.0 g ice cube is placed into 250 g of water with an initial temperature of 20.0 C. If the water drops to a temperature of 16.8 C, has a specific heat of 4.18 J/g*K, what is the enthalpy of fusion of the ice. Ignore the fact that the ice, once melted, has to be heated again.
the mass of ice taken = 10 g
the mass of water = 250 g
initial temperature of water = 20 C
the final temperature of water = 16. 8 C
specific heat of water = 4.18 J/g*K
the heat absorbed by ice to melt = heat loss by water
heat loss by water = mass X specific heat of water X change in temperature
heat loss by water = 250 X 4.18 X (20-16.8) = 3344 Joules
heat gained by ice = 3344 J
heat gained by ice = enthalpy of fusion X moles of ice
moles of ice = mass / molar mass = 10 / 18 = 0.56 moles
enthalpy of fusion = 3344 / 0.56 = 5971.43 J / mole
in acidic solution, the dichromate ion, Cr2O7^2- (aq) will oxidize Fe^2+ to Fe^3+ and form Cr^3+. What volume of 0.100M Cr2O7^2- (aq) is required to oxidize 60.0mL of 0.250 M Fe^2+ (aq)?
The concentration of Fe²⁺ is given as 0.250 M.
The volume of Fe²⁺ is given as 60.0 ml.
The concentration of Cr₂O₇²⁻ is given as 0.100 M.
The following is the reaction:
Cr₂O₇²⁻ (aq) + 6Fe²⁺ (aq) + 14H⁺ (aq) → 2Cr³⁺ (aq) + 6Fe³⁺ (aq) + 7H₂O (l)
1 mole of Cr₂O₇ reacts with 6 moles of Fe²⁺
The moles of Fe²⁺ present in the solution is:
Moles = Molarity × Volume
= 0.250 M × 60 ml × 1L / 1000 ml
= 0.015 ml
Thus, Fe²⁺ is producing 0.015 mol in the given reaction.
The volume of Cr₂O₇²⁻ required is:
1 mole of Cr₂O₇²⁻ = 6 moles of Fe²⁺
Molarity of Cr₂O₇²⁻ × volume of Cr₂O₇²⁻- = 1/6 moles of Fe²⁺ present in the reaction
Volume of Cr₂O₇²⁻ = 0.015 mol/0.600 mol/L
= 0.025L × 1000ml / 1L
= 25 ml
Hence, the volume of Cr₂O₇²⁻ needed is 25 ml.
In acidic solution, dichromate ion Cr2O72- can oxidize Fe2+ to Fe3+. The balanced redox equation is 6 Fe2+ (aq) + Cr2O72- (aq) + 14 H+ (aq) → 6 Fe3+ (aq) + 2 Cr3+ (aq) + 7 H2O (l). To find the volume of Cr2O72- required, we can use stoichiometry and given values.
Explanation:In acidic solution, the dichromate ion Cr2O72- (aq) can oxidize Fe2+ to Fe3+. The balanced redox equation is:
6 Fe2+ (aq) + Cr2O72- (aq) + 14 H+ (aq) → 6 Fe3+ (aq) + 2 Cr3+ (aq) + 7 H2O (l)
To find the volume of 0.100 M Cr2O72- (aq) required, we can use the stoichiometry of the reaction and the given concentration of Fe2+ (0.250 M) and volume (60.0 mL).
Let me know if you need help calculating the volume.
Learn more about Balancing Redox Reactions here:https://brainly.com/question/32431557
#SPJ11
6. Which statement best describes an igneous intrusion? A. Magma explodes to the surface and forms a smooth outer layer of rock. B. Igneous intrusions form when ice crystals splash into lava. C. Magma is exported to an open area and forms iron. D. Magma is injected into surrounding rock forming an igneous intrusion.
The correct answer is option D, that is, magma is injected into surrounding rock producing an igneous intrusion.
Magma refers to a semifluid or fluid substance within or underneath the crust of the Earth from which the formation of lava and other igneous rocks takes place by cooling. Igneous intrusion produces when the magma from beneath the Earth's surface is gradually pushed up to occupy the cracks or spaces between the rocks and solidifies and cools down prior of reaching to the Earth's surface.
When 200 grams of water cools from 50.°C to 25°C, the total amount of heat energy released by the water is?
Answer:
21 kJ
Step-by-step explanation:
The formula for the heat q is
q = mCΔT
Data:
m = 200 g; C = 4.184 J·°C⁻¹g⁻¹
T₁ = 50. °C; T₂ = 25 °C
Calculations:
ΔT = T₂ - T₁
ΔT = 25 – 50.
ΔT = -25 °C
q = 200 × 4.184 × (-25)
q = -21 000 J Convert to kilojoules
q = -21 kJ
The negative sign shows that energy is released, so the water has released 21 kJ of energy.
What happens to the water table, zone of saturation, and zone of aeration of an area during a flood?
Final answer:
During a flood, the water table rises, causing the zone of saturation to expand and the zone of aeration to diminish as the subsurface becomes increasingly waterlogged, which can have varying impacts on the ecosystem.
Explanation:
During a flood, the water table, zone of saturation, and zone of aeration undergo significant changes. The water table is the boundary between the zone of saturation, where the pore spaces in the ground are fully saturated with water, and the zone of aeration, where the pores are mainly filled with air. When a flood occurs, excessive rainwater and overflowing water bodies lead to an increase in ground saturation, causing the water table to rise temporarily. In such circumstances, the zone of saturation expands while the zone of aeration diminishes because more of the subsurface becomes waterlogged.
Flooding can also have various effects on the surrounding ecosystems and landscape. Sudden changes in water table levels can lead to soil saturation, impacting plant survival and depending on their adaptations to waterlogged conditions. Ecosystems dependent on stable groundwater levels, such as riparian areas near rivers, may experience stress or damage from the altered hydrological dynamics caused by flooding.
a student determined that 8.2 milligrams of oxygen is dissolved in a 1000 gram sample of water at 15 degrees Celsius and 1 atm what type of solution is this sample
Final answer:
The solution in question is a gaseous solution, and the application of Henry's Law is used to determine the changes in solubility of gases in water based on pressure changes.
Explanation:
The student determined that 8.2 milligrams of oxygen is dissolved in a 1000 gram sample of water at 15 degrees Celsius and 1 atm, which is an example of a gaseous solution. In the context of the given homework questions, this pertains to the application of Henry's Law which describes the solubility of a gas in a liquid at a given temperature is directly proportional to the partial pressure of the gas above the liquid. To determine the solubility under different conditions, you start by using the given solubility at known conditions and calculate the Henry's law constant. Then you can use this constant to find the new solubility when the pressure changes.
Henry's Law is used to determine the changed solubility when the pressure of the gaseous solute is increased from 20.26 kPa (152 torr) to 101.3 kPa (760 torr). This results in a new solubility of 7.25 × 10⁻³ g in 100.0 mL, or 0.0725 g/L. For the Application of Henry's Law and Solution examples at 20 °C, the concentration of dissolved oxygen in water is determined based on its partial pressure changes using the established Henry's law constant.
Using two spring scales, students pull on opposite sides of a dynamic cart at rest. 7 Newtons of force is pulling left and 5 Newtons force is pulling right. Describe the motion of the cart? A) The cart will move to the right. B) The cart will move to the left. C) The cart will not move. D) The cart will move up.
Answer is: B) The cart will move to the left.
A newton (N) is the International unit of measure for force.
One newton is the force needed to accelerate one kilogram of mass at the rate of one metre per second squared in direction of the applied force.
The cart will move to the left by the force of 2 newton.
F(cart) = 7 N - 5 N.
F(cart) = 2 N to the left.
Factors that affect the acceleration of an object include the..?
A. Net force acting on the object
B. Objects speed
C. Objects mass
D. Two of the above
The net force acting on the object and the mass of the object affect the acceleration of an object. Therefore, option (D) is correct.
What is acceleration?Acceleration of an object can be described as the change in the velocity of an object with respect to time. The acceleration of a body is a vector quantity carry both magnitude and direction. Acceleration is also defined as the second derivative of the position of the object w.r.t. time and the first derivative of the velocity of an object w.r.t. time taken.
According to Newton's second law, the force acting is equal to the multiplication of the mass and acceleration of an object.
F = ma
And, a = F/m
Therefore, acceleration (a) is inversely proportional to the mass (m) of the body and directly proportional to the applied force.
Therefore, the mass of the object and net acting force affects the acceleration of an object.
Learn more about acceleration, here:
brainly.com/question/3046924
#SPJ3
Elements that have properties in common are sometimes classified as a "chemical family". Select the element(s) that are in the same chemical family as gold and silver.
Answer is: copper (Cu).
Gold (Au) and silver (Ag) are noble metals and fall into the transitional metal family on the periodic table in group number 11.
Group 11 is also known as the coinage metals, due to their former usage.
Copper, silver and gold all occur naturally in elemental form.
Copper has atomic number 29, it has 29 protons and 29 electrons.
Electron configuration of copper atom: ₂₉Cu [Ar] 3d¹⁰ 4s¹.
Copper (Cu) is higher in activity series than silver and gold, so copper lose electron and silver gain electrons.
1.what city is near the epicenter
Im pretty sure austin texas is the closest place to the epicenter
The epicenter is the point on the Earth's surface directly above where an earthquake or underground explosion originates. The nearest city to the epicenter will likely experience significant effects of the event. For example, San Francisco was near the epicenter of the 1906 earthquake.
Explanation:The question does not provide a specific location or event, which makes it difficult to give a definite answer. In general, the term epicenter is used in geology, specifically in the context of earthquakes. It refers to the point on the Earth's surface directly above the point where an earthquake or other underground explosion originates—this point is known as the focus or hypocenter. Usually, the city near the epicenter of an earthquake will most likely experience the strongest shaking and highest degree of damage.
For example, if we were discussing the 1906 San Francisco earthquake, then San Francisco would be the city near the epicenter.
Learn more about Epicenter here:https://brainly.com/question/11222669
#SPJ2
For the reaction VCl2 + Cl2 → VCl5, what are the reactants, products, and correct coefficients in the balanced equation?
Reactants: 2VCl2 and 3Cl2; product: 2VCl5
Reactants: 2VCl2 and 1Cl2; product: 2VCl5
Products: 1VCl2 and 2Cl2; reactant: 1VCl5
Products: 2VCl2 and 1Cl2; reactant: 2VCl5
2VCl2 + 3Cl2 -> 2VCl5
Reactants: 2VCl2 and 3Cl2
Product: 2VCl5
To balance the equation, set up a chart with the reactants and products on separate sides. On one side should be V - 1 and Cl - 4 with a line and on the right side should be V - 1 and Cl - 5.
The numbers correspond with the subscripts. To balance, use the biggest compound (VCl5) and multiply that by 2 in order to get an even number for both of 2 and 10. For the reactants, you now need to multiply to get corresponding amounts.
Hope this helps!
Answer: Reactants: 2VCl2 and 3Cl2; product: 2VCl5
Explanation:
what is the general form of a decomposition reaction
A reaction where one becomes two
2H202 --> 2H2O + O2
Final answer:
The general form of a decomposition reaction is AB ⇒ A + B.
Explanation:
The general form of a decomposition reaction is when a single compound breaks down into two or more simpler substances. These products can be elements, compounds, or a mixture of both. A common way to represent a decomposition reaction is using the formula AB ⇒ A + B, where AB is the original compound and A and B are the simpler substances that are produced.
Decomposition reactions can release energy, often symbolized as AB ⇒ A + B, where AB represents the substrate, A and B are products, and the energy is released when covalent bonds within the substrate are broken. For example, the thermal decomposition of gaseous [tex]N_{2}[/tex] [tex]O_{5}[/tex] to [tex]NO_{2}[/tex] and [tex]O_{2}[/tex] can be represented as [tex]2N_{2}O_{5}[/tex](g) ⇒ 4[tex]NO_{2}[/tex](g) + [tex]O_{2}[/tex](g). This demonstrates the breaking of bonds between components of a larger molecule to form smaller product molecules.
The weights of all elements are always compared to oxygen.
Answer:
The weights of all elements are always compared to the Carbon-12.
Explanation:
The weights of all elements are always compared to the Carbon-12 because the mass of carbon is 12 which is the exactly the sum of protons and neutrons.
Oxygen was also considered the standard for some time but later this stander was rejected because in natural O¹⁷ and O¹⁸ were also present and this create the two different atomic mass tables.
AMU:
Atomic mass unit is define as the 1/12 the mass of an atom of carbon-12.
C12 has six neutron and six protons in the nucleus.
This unit is used to express the masses of atoms. We know that masses of atoms are very small and we do not have any such type of balance that can measure very small quantity. So that is way we use this scale to measure small quantity. For example, according to this scale
relative atomic mass of hydrogen is 1.008 amu
relative atomic mass of oxygen is 15.999 amu
relative atomic mass of uranium is 238.0289 amu
relative atomic mass of chlorine is 35.453 amu
Atomic weights are based on relative masses of atoms, with oxygen historically used as a standard. For instance, water's fixed composition reflects a constant ratio between hydrogen and oxygen, echoing the consistency and importance of atomic weights in chemistry.
Explanation:The weights of all elements are defined relative to the atomic mass of other elements, and historically, oxygen was commonly used as the standard for comparison. Oxygen has an atomic weight of 16, which means if you compare it to hydrogen (the lightest element with an atomic weight close to 1), the ratio is 16:1. This is consistent with the Law of Multiple Proportions, where elements combine in simple whole number ratios.
For example, in water (H₂O), oxygen accounts for about 88.8% of the mass, and hydrogen about 11.2%, irrespective of the water's source or method of preparation. These percentages reflect the fixed mass ratio in which hydrogen and oxygen combine to form water, demonstrating the consistency in atomic weights and the fixed nature of chemical compounds.
Atomic weights are determined through experiments and calculations and provide a basis for the quantification in chemical reactions. Precise measurements and experimental uncertainties limit the precision of these values, typically to four significant figures. Atomic weight is crucial for understanding the composition of molecules and for converting between masses of substances and moles during chemical calculations.
If an atom has 5 electrons outside of its nucleus, which combination of protons and neutrons would result in a neutral atom?
5 protons, 5 neutrons
Chemicals become positively charged by
Answer: Chemicals become positively charged by loosing electrons.
Explanation: There are three types of compounds:
1) Neutral compounds: These are the compounds where equal number of protons and electrons are present.
2) Positive compounds: These are the compounds where number of protons are more than the electrons. These are considered as cations.
3) Negative compounds: These are the compounds where number of electrons are more than the protons. These are considered as anions.
So, in order to have a positive charge on a compound, that compound has to loose electrons, so that the number of protons gets higher than the number of electrons.
Which of these are most likely to occur along a transform boundary?
A. Earthquakes
B. Rugged Mountain Ranges
C. Hot Spots
D. Deep-Sea Trenches
A earthquakes because the plates will suddenly shift quickly or gring quickly causing the ground to move because of the tectonic plates.
The correct answer is A.Earthquakes. Hope it helps!!
Scientists take scientific measurements carefully in order to ensure their reliability and validity. What is the difference between accuracy and precision in scientific measurements
Accuracy refers to the closeness of a measured value to a standard or known value. Precision is independent of accuracy. You can be very precise but inaccurate.
Answer:
Both terms are related and they are really important in the science field to measure how successful can be an experiment.
First, the accuracy is the relation to express how close is the value that I measure in an experiment from a real value that it has been already proved.
For example: I measure the volume of a soda can in my lab and I found that this soda can has 235 mL inside but the packing says that has 230 mL. So it means that my measure data it is not accurate.
Thus, the accuracy is important because gives me validity of my designed experiment.
Second, the precision is the relation between my datas and how far are they from each other.
For example: Taking again the example of the soda can, I was in the lab measuring the volume and I made it 3 times. My datas were: 235 mL, 220mL, and, 210 mL. So it means that my measures are far from each other so it is not precise.
Precision is important because gives reliability to the experiment.
There is also mathematical approximations to measure accuracy and precision, the accuracy can be measure finding the error and the precision can be measure by a standard deviation that means how far are my datas from the average.
What are the coefficients that would correctly balance this equation? __Zn+__K2CrO4 > __K + __ZnCrO4
A. 2,1,2,1
B. 1,2,3,1
C. 1,2,1,2
D. 1,1,2,1
Answer : The correct option is, (D)
Explanation :
Balanced reaction : Balanced reactions are those reactions when the number of different atoms of the element present in the reactant sides is equal to the product sides.
The given unbalanced reaction is,
[tex]Zn+K_2CrO_4\rightarrow K+ZnCrO_4[/tex]
The balanced chemical reaction is,
[tex]Zn+K_2CrO_4\rightarrow 2K+ZnCrO_4[/tex]
Therefore, 1, 1, 2, 1 are the coefficients that would correctly balance this equation.
To balance the chemical equation Zn + K2CrO4 > K + ZnCrO4, the correct coefficients should be: 1 Zn, 1 K2CrO4, 2 K, and 1 ZnCrO4. Therefore, the answer is D. 1,1,2,1.
Explanation:The balancing of chemical equations involves ensuring that there is an equal number of each type of atom on both sides of the reaction. This equality is fundamental to the Law of Conservation of Mass. In case of the equation Zn + K2CrO4 > K + ZnCrO4, here's how you balance the equation:
Start by balancing the atoms that only appear once in both sides. In this case, Zn is already balanced.Next, look at the K and Cr atoms. You have 2 K atoms and 1 Cr atom on the reactants' side and only 1 K atom and 1 Cr atom on the products’ side. This indicates that you should add a coefficient of 2 in front of K on the right side of the equation.Now, the equation becomes Zn + K2CrO4 > 2K + ZnCrO4 and all atoms are balanced.Therefore, the correct coefficients are: 1 Zn, 1 K2CrO4, 2 K, and 1 ZnCrO4, so the choice D. 1,1,2,1 is the correct one.
Learn more about Balancing Chemical Equations here:https://brainly.com/question/28294176
#SPJ11
Explain how Dmitri Mendeleev arranged his periodic table. How was he able to make predictions about the blanks that he left in the table?
He predicted them by the chemical similarities.