Answer: The correct answer is (d).
Explanation:
Magnet has two poles: South pole and North pole. The same poles of the magnets repel each other. The opposite poles of the magnets attract each other.
In the absence of other magnet, a freely swinging magnet points in North-South direction. The earth has a magnetic field. The magnetic field of the bar magnet is same as the magnetic field of the earth's magnet.
The position of the earth's magnetic poles are not fixed. The south pole of the earth's magnet lies in the geographic north as it attracts the north pole of the freely swinging magnet.
If one part of a freely suspended magnet always points to Earth's magnetic pole in the Northern Hemisphere.
What statement best defines a universal law A. it is in effect at all times B. It operates only under specific conditions C. It is in effect some of the time D. It changes over time
A certain very bright star has an effective surface temperature of 20 000 K. Assuming that it radiates as a blackbody, what is the wavelength at which () is maximum?
What is the function of a diaphragm in a film camera
What occurs when a swimmer pushes through the water to swim?
If i play two pure tones, one at 100 hz and the other at 110hz, will we perceive beats? if so, what will be the beat frequency
how much time would it take for an airplane to reach its destination if it traveled at an average speed of 790 km/hr for a distance
Block b rests upon a smooth surface. if the coefficients of static and kinetic friction between a and b are μs = 0.4 and μk = 0.3, respectively, determine the acceleration of each block if p = 6 lb
Given
Weight of the block A, Wa = 20 lb, weight of block B Wb = 50 lb. Applied force to block A, P = 6lb, coefficient of static friction µs = 0.4, coefficient of kinetic friction µk = 0.3. If a force P is applied to the body, no relative motion will take place until the applied force is equal to the force of friction Ff, which is acting opposite to the direction of motion. Magnitude of static force of friction between block A and block B, Fs = µsN, where N is reaction force acting on block A. Now, resolve the forces Fx = max. P = (mA + mB)a,
6 = (20 / 32.2 + 50 / 32.2)a
2.173a = 6
A = 2.76 ft/s^2
To check slipping occurs between block A and block B, consider block A:
P – Ff = mAaA
6 – Ff = 1.71
Ff = 4.29 lb
And also,
N = wA. We know static friction,
Fs = µsN
Fs = 0.4 x 20
Fs = 8lb
Frictional force is less than static friction. Ff < Fs
Therefors, acceleration of block A, aA = 2.76 ft/s^2, acceleration of block B aB = 2.76 ft/s^2
Between blocks 'a' and 'b', the coefficients of friction come into play. If the force transmitted from block 'b' to 'a' is greater than the maximum static friction, block 'a' will move and its acceleration can be calculated.
Explanation:The smooth surface implies there is no friction between block 'b' and the surface. However, there is friction between blocks 'a' and 'b'. Hence, the given coefficients of static and kinetic friction, μs = 0.4 and μk = 0.3 would apply there. If the force 'p' was applied to block 'b', since there is no friction between 'b' and the surface, 'b' would move freely with acceleration a = F/m (F: applied force, m: mass of the block).
For block 'a', the acceleration would depend on whether the frictional force is able to resist the force being applied through block 'b'. The static friction is given by μs * N (N: Normal force - equal to the weight of block 'a' in this case), which has to be overcome to set the block motion. Once it starts moving, kinetic friction, given by μk * N, comes into effect. If the force transmitted from block 'b' to 'a' is greater than the maximum static friction, block 'a' will start to move and its acceleration can be calculated by subtracting the kinetic friction from the transmitted force and dividing by the mass of block 'a'.
Learn more about Friction & Acceleration here:https://brainly.com/question/37731221
#SPJ11
Superman throws a boulder of weight 3800 n at an adversary on the surface of the earth, where the magnitude of the acceleration due to gravity, g = 9.80 m/s2 . what horizontal force must superman apply to the boulder to give it a horizontal acceleration of 12.8 m/s2 ?
Superman must apply a horizontal force of approximately 4963.33 N to the boulder to achieve the desired acceleration of 12.8 m/s^2. This calculation is based on the weight of the boulder and the given acceleration due to gravity.
Explanation:To determine the horizontal force that Superman must apply to the boulder to achieve the given horizontal acceleration, we first need to calculate the mass of the boulder. Since the weight of the boulder (W) is given by the formula W = mg, where m is the mass of the boulder, g is the acceleration due to gravity (9.80 m/s2), and W is the weight (3800 N), the mass of the boulder (m) can be calculated as follows:
m = W / g = 3800 N / 9.80 m/s2 = 387.76 kg (rounded to two decimal places).
Now that we know the mass, we can find the horizontal force (F) needed to achieve the horizontal acceleration (a) using Newton's second law, F = ma. Substituting the known values results in:
F = m * a = 387.76 kg * 12.8 m/s2 = 4963.33 N.
So, Superman must apply a horizontal force of approximately 4963.33 N to provide the boulder with the desired acceleration of 12.8 m/s2.
Where in an atom would you expect to find electrons? protons? neutrons?
A wheel with radius 0.487 m rotates 5.75 times every second. find the period of this motion.
To find the period of a wheel that rotates 5.75 times per second, use the formula T = 1/f, resulting in a period of 0.174 seconds.
Explanation:To find the period of the motion for a wheel that rotates 5.75 times every second, we can use the relationship between frequency (f) and period (T). The frequency is the number of revolutions per second, which we're given as 5.75 revolutions per second. The period is the time it takes to complete one revolution. The formula that relates frequency and period is T = 1/f.
Plugging in the given frequency:
T = 1/5.75
Calculating this gives us:
T = 0.174 s
Therefore, the period of this motion, which is the time it takes the wheel to make one complete revolution, is 0.174 seconds.
A driver traveled 270 km in 3 hours. The driver’s destination was still 150 km away. What was the driver’s average speed at this point?
The driver's average speed up to that point in the journey is 90 km/h, calculated by dividing the distance traveled, 270 km, by the time spent, 3 hours.
Explanation:To find the driver's average speed at a given point during the trip, we divide the total distance traveled by the total time spent traveling. In this case, the driver has traveled 270 km in 3 hours. Using the formula for average speed, which is average speed = total distance / total time, we can calculate the average speed as follows:
average speed = 270 km / 3 hours = 90 km/h.
Therefore, the driver's average speed at this point in the journey is 90 km/h. This calculation doesn't take into account the remaining distance to the destination, which is 150 km away.
» Accelerating Lear Jet
Mike is piloting a lear jet traveling at 193.8 m/s. He accelerates at 13.5 m/s2 over a distance of 2370 meters. How fast will the jet be moving at the end of this acceleration
The equation relevant to use here is:
v^2 = v0^2 + 2 a d
where,
v is final velocity = ?
v0 is intial velocity = 193.8 m/s
a is acceleration = 13.5 m/s^2
d is distance = 2370 m
v = sqrt [193.8^2 + 2 (13.5) 2370]
v = 318.67 m/s
A microwave oven operates at 2.00 ghz . what is the wavelength of the radiation produced by this appliance? express the wavelength numerically in nanometers.
Answer:
1.5x10^8
Explanation:
An example of an atom that has no charge is one that has A. 2 protons, 2 electrons, and 1 neutron. B. 3 protons, 2 electrons, and 1 neutron. C. 1 proton, 2 electrons, and 3 neutrons. D. 3 protons, 1 electron, and 3 neutrons.
What does the term mccarthyism describe? To whom does it refer?
McCarthyism refers to the practice of making accusations of subversion or treason without proper regard for evidence.
It also refers to the use of unfair investigatory or accusatory methods in order to suppress opposition or stifle political dissent. The term originates from the actions of U.S. Senator Joseph McCarthy, particularly in the years 1950 to 1954, when he was chairman of the Senate Permanent Subcommittee on Investigations.
During this time, McCarthy became the most visible public face of a period of intense anti-communist suspicion inspired by the tensions of the Cold War. His controversial and aggressive tactics, which included public accusations of disloyalty and treason without substantial evidence, led to the term McCarthyism being coined to describe such behavior.
The term has since taken on a broader meaning, not confined to the historical context of McCarthy's activities, and is used to describe demagogic, reckless, and unsubstantiated accusations, as well as guilt by association and the harassment of political opponents.
The loudness of a sound is related to the _____ of the sound wave.
Wavelength
Frequency
Velocity
Amplitude
The loudness of a sound is related to the amplitude of the sound wave. The correct answer is amplitude and the correct option is option (4).
Amplitude refers to the maximum displacement of particles in a medium from their rest position as a sound wave passes through it. In simpler terms, it measures the strength or intensity of the sound wave. A larger amplitude corresponds to a louder sound, while a smaller amplitude corresponds to a softer sound.
Wavelength, frequency, and velocity are other properties of sound waves, but they are not directly related to the loudness of the sound.
Wavelength is the distance between two consecutive points in a sound wave, frequency represents the number of complete cycles of the wave that occur in one second (measured in hertz), and velocity is the speed at which the sound wave travels through a medium. These properties can affect other characteristics of the sound wave, such as pitch or timbre, but they do not directly determine the loudness.
Therefore, The loudness of a sound is related to the amplitude of the sound wave. The correct answer is amplitude and the correct option is option (4).
To know more about sound waves:
https://brainly.com/question/12002218
#SPJ6
A rocket experiences a constant force even as the amount of fuel in its fuel tanks decreases. What happens to the acceleration of the rocket as it runs out of fuel?
A - The acceleration decreases because the mass increases.B - The acceleration increases because the mass increases.C - The acceleration decreases because the mass decreases.D - The acceleration increases because the mass decreases.
We can answer this question by looking at Newton's second law:
[tex]F=ma[/tex]
which can be rewritten as
[tex]a=\frac{F}{m}[/tex]
where F is the force experienced by the rocket, m is its mass, a is its acceleration. In the rocket's case, the mass of the rocket decreases (because the fuel in the tank decreases), while the force remains constant, so the ratio F/m increases, and therefore the acceleration of the rocket increases.
Therefore, the correct answer is
D - The acceleration increases because the mass decreases.
Which structure is found in all EUKARYOTIC cells? Large central vacuole, Golgi apparatus, flagella, cilia
Answer:
Golgi apparatus.
Explanation:
Racing greyhounds are capable of rounding corners at very high speeds. a typical greyhound track has turns that are 45 m diameter semicircles. a greyhound can run around these turns at a constant speed of 16 m/s . part a what is its acceleration in m/s2? express your answer to two significant figures and include the appropriate units. a = 11 ms2 submitmy answersgive up correct part b what is its acceleration in units of g ? express your answer using two significant figures.
The relationship between acceleration, velocity and radius is given as:
a = v^2 / r
Since we are given a diameter of 45 m, hence the radius is 22.5 m.
a = (16 m/s)^2 / 22.5 m
a = 11.38 m/s^2
In 2 significant figures:
a = 11 m/s^2
A greyhound running around a semicircular racetrack at a constant speed is experiencing centripetal acceleration due to its changing direction, which, in this case, is approximately 5.71 m/s² or 0.58g.
Explanation:A greyhound running around a semicircular racetrack at a constant speed is not accelerating in the linear sense. However, because its direction is continually changing, it is experiencing centripetal acceleration. Centripetal acceleration can be calculated by the formula a = v^2/r, where v is the speed, and r is the radius of the circular path. Plugging in the given values, we obtain an acceleration of approximately 5.71 m/s²
To find the acceleration in units of g, we need to divide this value by the acceleration due to gravity, which is approximately 9.80 m/s². Therefore, the dog's acceleration is approximately 0.58g. In conclusion, the greyhound experiences a centripetal acceleration of about 5.71 m/s², which is equivalent to 0.58g, when it is running around the turns at the given speed.
Learn more about Centripetal Acceleration here:https://brainly.com/question/14465119
#SPJ3
The velocity of a 40 kg object increases from 20 m/s to 30 m/s in 2 seconds. What is the acceleration of the object during these 2 seconds
"you discover a planet orbiting a distant star that has about the same mass as the sun, with an orbital period of 63 days. what is the planet’s orbital distance?"
The planet's orbital distance is approximately 0.028 astronomical units (AU).
Explanation:The orbital distance of a planet can be calculated using Kepler's Third Law. Kepler's Third Law states that the square of the orbital period of a planet is proportional to the cube of its average distance from the Sun. In this case, the planet has an orbital period of 63 days, which is approximately 0.1726 years. The sun's mass is approximately 1 solar mass. We can use these values to solve for the planet's orbital distance.
Using the formula for Kepler's Third Law, we have:
T^2 = (4*pi^2*a^3)/G*M
Where T is the orbital period, a is the orbital distance, G is the gravitational constant, and M is the mass of the Sun.
Plugging in the values we have:
T^2 = (4*pi^2*a^3)/(6.67430 × 10^-11 m^3 kg^-1 s^-2 * 1 solar mass)
Simplifying the equation, we can solve for a:
a^3 = (T^2 * G * M)/(4*pi^2)
Taking the cube root of both sides, we find:
a = ((T^2 * G * M)/(4*pi^2))^(1/3)
Let's plug in the values:
a = ((0.1726^2 * 6.67430 × 10^-11 m^3 kg^-1 s^-2 * 1 solar mass)/(4*pi^2))^(1/3)
a ≈ 0.028 AU
Therefore, the planet's orbital distance is approximately 0.028 astronomical units (AU).
A wire is wrapped around a piece of iron, and then electricity is run through the wire. What happens to the iron?
A 2.41 kg block is pushed 1.42 m up a vertical wall with constant speed by a constant force of magnitude f applied at an angle of 59.9 ◦ with the horizontal. the acceleration of gravity is 9.8 m/s 2 . 2.41 kg 59 f .9 ◦ if the coefficient of kinetic friction between the block and wall is 0.521, find the work done by f.
Final answer:
The work done by the force can be calculated using the formula: Work = Force * Distance. The magnitude of the force can be found using trigonometry, and then the work is calculated by multiplying the force by the distance moved. The work done by the force ƒ is 15.32 Joules.
Explanation:
The work done by the force ƒ can be calculated using the formula:
ƒ = Fd
where F is the magnitude of the force and d is the distance moved. In this case, the force ƒ is equal to the horizontal component of the applied force. We can find this component using trigonometry:
ƒ = Fcosθ
where θ is the angle between the force and the horizontal direction. Substituting the given values, we have:
ƒ = (20 N)cos(59.9°)
ƒ = (20 N)(0.539)
ƒ = 10.78 N
Now we can calculate the work done by the force ƒ using the formula:
Work = ƒd
where d is the distance moved. In this case, the distance moved is 1.42 m. Substituting the values, we have:
Work = (10.78 N)(1.42 m)
Work = 15.32 J
Therefore, the work done by the force ƒ is 15.32 Joules.
Why is it misleading to describe atmospheric pressure as simply the weight of the air only pressing down on a surface?
A 231-ω and a 206-ω resistor are connected in series across an unspecified power supply. if the current through the 231-ω resistor is 0.39 a, what is the exact current (in
a.through the 206-ω resistor? do not include units with your answer.
The characteristics of series circuits, we can find that the current in the two resistances the same, the answer is:
i = 0.39 A flows in the 206 Ω resistorElectric circuits are a system formed by resistors, capacitors and coils, through which the electric current flows, these circuits can be classified:
Parallel circuits. In these circuits there are several branches in such a way that the current is divided between each branch according to its resistance, the advantage that if one branch is broken by the others, electricity can continue to flow. Series cicuits In this type of circuit there is only one path for the current, which is why when it breaks, the current in the entire circuit is interrupted.In this case it is indicated that we have a series circuit, for which all the current must flow through the path, consequently all the current of the circuit must pass through the two resistors.
In conclusion, using the characteristics of series circuits, we find that the current in the two resistances the same, the answer is:
i = 0.39 A flows in the 206Ω resistorLearn more about series circuits here:
https://brainly.com/question/14997346
A 960 kg motorboat accelerates away from a dock at 2.3 m/s2 .t Its propeller provides a thrust force of 4.1 kN .
A soccer player kicks a soccer ball of mass 0.45 kg that is initially at rest. the player's foot is in contact with the ball for 1.6 × 10-3 s, and the force of the kick is given by f(t) = [(7.0 × 104)t - (1.6 × 106)t2] n for where it is in seconds. find the magnitudes of the maximum force on the ball from the player's foot during the period of contact,
The sun delivers an average power of 1.499 w/m2 to the top of neptune's atmosphere. find the magnitudes of vector e max and vector b max for the electromagnetic waves at the top of the atmosphere.
Magnitudes of vector e max and vector b max for electromagnetic waves at top of the Neptune's atmosphere are 23.76V/m and 17.92×10⁻⁸ T respectively.
What is magnetic field?The magnetic field is the field in the space and around the magnet in which the magnetic field can be filled.
The maximum magnetic field experienced at the top of the Neptune's atmosphere can be given as,
[tex]B_{max}=\sqrt\dfrac{2\mu_oI}{c}[/tex]
Here, (μ₀) vacuum permeability, (I) is the intensity, and (c) speed of light in vacuum.
As the sun delivers an average power of 1.499 w/m2 to the top of Neptune's atmosphere. Thus, the b max is,
[tex]B_{max}=\sqrt{\dfrac{4\pi\times10^{-7}\times1.499}{3\times10^8}}\\B_{max}=7.92\times10^{-8}[/tex]
Now the value of E max is,
[tex]E_{max}=B_{max}\times c\\E_{max}=7.92\times10^{-8}\times 3\times10^{8}\\E_{max}=23.76\rm\; V/m[/tex]
Thus, the magnitudes of vector e max and vector b max for electromagnetic waves at the top of the atmosphere are 23.76V/m and 17.92×10⁻⁸ T respectively.
Learn more about magnetic field here;
https://brainly.com/question/7802337
A 1100-kg car pulls a boat on a trailer. (a) what total force resists the motion of the car, boat, and trailer, if the car exerts a 1900-n force on the road and produces an acceleration of 0.550 m/s2 ? the mass of the boat plus trailer is 700 kg. (b) what is the force in the hitch between the car and the trailer if 80% of the resisting forces are experienced by the boat and trailer?
The total resistive force against the car, boat, and trailer is 910 N. The force experienced in the hitch between the car and the trailer is 728 N.
Explanation:This is a classic problem that involves applying Newton's second law and the concept of net force. Newton's second law states that Force = mass * acceleration. Let's begin with the first part of the question.
Given that the car has a mass of 1100 kg and it accelerates at 0.550 m/s2, and uses a force of 1900 N, we realize that this force is not just accelerating the car, but also overcoming some resistance. The total force exerted by the car is the sum of the force to overcome the resistance and the force to accelerate both the car and the trailer. We calculate this total force as follows:
Force_moving = (Mass_car + Mass_trailer) * Acceleration
Force_moving = (1100 kg + 700 kg) * 0.550 m/s2
Force_moving = 990 N
The resistive force then is the difference between the force the car exerts on the road and the force needed to move: Force_resistance = Force_exerted – Force_moving = 1900 N – 990 N = 910 N
In the second part of the question, we’re asked to figure out the force in the hitch between the car and the trailer, if 80% of the resisting forces are experienced by the boat and trailer. We simply take 80% of the resisting force:
Force_hitch = 0.80 * Force_resistance = 0.80 * 910 N = 728 N
Learn more about Newton's second law here:https://brainly.com/question/18769451
#SPJ12
The total resisting force to the motion of the car, boat, and trailer is 910N. The force in the hitch between the car and the trailer, experiencing 80% of the resisting force, is 728N.
Explanation:The subject of this question pertains to Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
(a) We can use this equation to calculate the total a total force that resists the motion of the car, boat, and trailer: F = ma. Here, F is the net force, m is the total mass (car + boat + trailer), and a is the acceleration. Plugging in the given values (F = (1100kg + 700kg) * 0.550m/s²), we find the net force is 990 N. Since the car is exerting a force of 1900 N, the force resisting the motion can be found by subtracting this net force from the force exerted by the car (1900N - 990N), which gives 910 N.
(b) If 80% of the resisting forces are experienced by the boat and trailer, then the force on the hitch would be 80% of the total resisting force, i.e., 0.8 * 910 N = 728 N.
Learn more about Newton's Second Law of Motion here:https://brainly.com/question/13447525
#SPJ2
Describe the relationship of the Earth’s lithosphere to the asthenosphere.
The Earth's soft putty-like Asthenosphere carries the Lithosphere (which is like a giant jig-saw puzzle fit around the Earth), and the giant continents on its back.
Lithosphere floats on the top of Asthenosphere
Explanation:The earth crust is made up of tectonic plates and these tectonic plates are always in flow. Together the earths crust and mantle beneath it is called lithosphere. On the other hand the area beneath the mantle is called the asthenosphere. Actually lithosphere is solid in nature and asthenosphere is semi solid or liquid nature. The lithosphere floats on the asthenosphere.