_____ sedimentary rocks are made of once-living things or their pieces. A. Organic B. Inorganic C. Chemical D. Fragmental

Answer:

The answer is D

Explanation:

Answer:

In the mentioned experiment, three kinds of variables are used, that is, the independent variable, the dependent variable, and the controlled variable. Of these the independent variables are the one that does not get modify, however, can be modified by the scientist, while the dependent variables are the one that modifies when the independent variables modify, and the controlled variables are the ones that are maintained same throughout.  

In the given experiment, the length of the wire, the type of the wire utilized, and the thermal conductivity of the wire are the independent variables.  

Answer:

-0.1051

Explanation:

First, we need to find the degree of dissociation (α) of each of the groups using the Handerson-Halsebach equation:

pH = pKa + log (α/1-α)

log (α/1-α) =  pH - pKa

log (1-α/α) = pKa - pH

1-α/α =[tex]10^{pKa - pH}[/tex]

1-α = [tex]10^{pKa - pH}[/tex]*α

α = [tex]\frac{1}{10^{pKa-pH} +1}[/tex]

So, fo the α-carboxyl group:

α = [tex]\frac{1}{10^{-6.03} +1}[/tex]

α = 1.0000

And for the α-amino group

α = [tex]\frac{1}{10^{0.93} +1}[/tex]

α = 0.1051

In the ionization, the α-carboxyl group goes from neutral to a negative ion with charge -1, and the α-amino group goes from a positive ion with charge +1 to a neutral compound. So, the net charge is how many ions are presented multiplied by the charge.

For the first one, the value of α is the value of ions, but for the second, α represents the neutral, so the ions are 1-α:

-1*(1.000) + (+1)*(1-0.1051) = -0.1051

The dehydration of 2-heptanol would yield 2-heptene as the major product along with 1-heptene as a minor product, while the dehydration of 2-methyl-1-cyclohexanol would yield 1-methyl-1-cyclohexene as the major product along with other isomeric alkenes as minor products.

The products obtained by the dehydration of 2-heptanol and 2-methyl-1-cyclohexanol can be predicted based on the rules of alkene formation during dehydration reactions.

For 2-heptanol, the dehydration follows Zaitsev's rule, which states that the more substituted alkene is the major product. In this case, dehydration of 2-heptanol would yield a mixture of alkenes, with the most substituted alkene, 2-heptene, as the major product, and the less substituted alkene, 1-heptene, as a minor product. The reaction can be represented as follows:

[tex]\[ \text{CH}_3\text{CH}(\text{OH})\text{CH}_2\text{CH}_2\text{CH}_2\text{CH}_3 \rightarrow \text{CH}_3\text{CH}=\text{CHCH}_2\text{CH}_2\text{CH}_3 + \text{CH}_3\text{CH}_2\text{CH}=\text{CHCH}_2\text{CH}_3 \][/tex]

For 2-methyl-1-cyclohexanol, the dehydration would also follow Zaitsev's rule. However, since the hydroxyl group is on a cyclohexane ring, the dehydration would lead to the formation of an alkene within the ring. The most substituted alkene that can be formed is 1-methyl-1-cyclohexene. The reaction can be represented as follows:

[tex]\[ \text{C}_6\text{H}_{11}\text{CH}(\text{OH})\text{CH}_3 \rightarrow \text{C}_6\text{H}_{11}\text{C}(\text{CH}_3)=\text{CH}_2 + \text{isomeric alkenes} \][/tex]

In summary, the dehydration of 2-heptanol would yield 2-heptene as the major product along with 1-heptene as a minor product, while the dehydration of 2-methyl-1-cyclohexanol would yield 1-methyl-1-cyclohexene as the major product along with other isomeric alkenes as minor products.

Answer:

B.

Explanation:

THERE IS NO EXPLANATION NEEDED BECAUSE REASONS LOL

The bond enthalpy is the energy required to break a chemical bond. The bond enthalpy of NO2 is lower than NO because NO2 has a double bond which is stronger and thus requires more energy to break compared to the single bond in NO.

The bond enthalpy, or energy, is a measure of the strength of a chemical bond. It is identified by the energy required, in joules or kilojoules per mole (kJ/mol), to break a chemical bond. In this case, we are comparing the bond enthalpy of NO, a molecule with a single bond, and that of NO2, a molecule with double bonds between the atoms.

The bond enthalpy in NO is 632 kJ/mol and that of each NO bond in NO2 is 469 kJ/mol. The difference in bond enthalpies is due to the difference in the number of electron pairs in the bond. The strength of a bond between two atoms increases as the number of electron pairs in the bond increases. Simply put, a single covalent bond (as in NO) is typically weaker than a double bond (as present in NO2), and therefore, requires less energy to break. Hence the bond enthalpy is lower for NO2 as it is harder to break its double bond.

It's important to remember that the exact values of bond enthalpy also depend on the specific atoms in the bond and their electronegativity, which is why there are some discrepancies seen in bond enthalpies in different molecules.

https://brainly.com/question/29633366

#SPJ11

The amount of heat needed to raise the temperature of one gram of a substance by 1° Celsius is known as the specific heat. It is measured in joules per gram per degree Celsius and is distinct from the nutritional calorie concept.

The amount of heat needed to raise one gram of a substance by 1° Celsius is called the specific heat of the substance. Specific heat is a property that describes how much energy is needed to increase the temperature of 1 gram of the substance by 1°C. The common unit for specific heat is joules per gram per degree Celsius (J/g°C). When discussing the energy needed to change the temperature of water, we often refer to the calorie, which is the amount of heat required to raise 1 gram of water by 1°C, whereas in nutrition, the term "calorie" usually refers to a kilocalorie (1000 calories) and is the heat needed to raise 1 kilogram of water by 1°C.

https://brainly.com/question/28852989

#SPJ12

The movement of sediment particles during deflation varies with size; small particles like clay and silt are suspended and travel far, sand-sized particles undergo saltation staying near the ground, and the largest particles move by traction.

The size of sediment particles greatly affects their movement during deflation, a process where wind removes loose particles from the surface, leading to erosion. Small particles such as clay and silt can be lifted and suspended in the air, potentially traveling great distances and at considerable heights. In contrast, larger particles like sand are prone to saltation, which means they are blown in short hops and remain close to the ground. Finally, the largest particles, which may include gravel and pebbles, are moved by traction, meaning they are rolled or pushed along the surface without being lifted into the air.

Sediment particles' movement is influenced by their fall velocity, which depends on factors like particle size, shape, specific density, water temperature, and sediment concentration. For instance, a silt particle with a diameter of 10 micrometers has a fall velocity of about 0.1 mm/s. Moreover, particle erosion and transport are influenced by the dynamics of the flow, whether it be water or wind. Sediment is moved and sorted based on these conditions, affecting the distribution and composition of the soil or sediment layer.

1.71 x 10²¹ molecules of ascorbic acid.

The Problem:

How many molecules of ascorbic acid (vitamin C or C₆H₈O₆) are in a 500 mg tablet?

The Process:  

Step-1

We prepare the molar mass of ascorbic acid or C₆H₈O₆.  

Relative atomic mass (in rounding to integers):  

In ascorbic acid, there are six carbon atoms, eight hydrogen atoms, and six oxygen atoms. Therefore the molar mass is given by  

[tex]\boxed{(12 \times 6) + (1 \times 8) + (16 \times 6) = 176 \ g/moles}[/tex]  

Step-2

We calculate the moles of 500 mg ascorbic acid. Let us convert it to 0.5 g.

[tex]\boxed{ \ moles = \frac{mass}{molar \ mass} \ } \rightarrow \boxed{ \ moles = \frac{0.5 \ g}{176 \ g/mol} \ }[/tex]

Therefore we get 2.84 x 10⁻³ moles.

Step-3

Remember this, one mole contains 6.02 x 10²³ molecules, which is called The Avogadro's number.  

Let us convert 2.84 x 10⁻³ moles to the number of molecules (N).  

[tex]\boxed{ \ moles = \frac{N}{6.02 \times 10^{23}} \ } \rightarrow \boxed{ \ N = moles \times 6.02 \times 10^{23} \ } [/tex]

[tex]\boxed{ \ N = 2.84 \times 10^{-3} \ moles \times 6.02 \times 10^{23} \ \frac{molecules}{mol} \ }[/tex]

Thus the amount of molecules in 500 mg C₆H₈O₆ are [tex]\boxed{ \ 1.71 \times 10^{21} \ molecules \ }[/tex].  

- - - - - - -  

Quick Steps  

[tex]\boxed{ \ \frac{6.02 \times 10^{23} \ molecules}{1 \ mol} \times \frac{1 \ mole}{176 \ gram} \times 0.5 \ grams \ } = \boxed{ \ 1.71 \times 10^{21} \ molecules \ }[/tex]

Pressure that is exerted by one gas as if it occupied a container by itself

Considering the Dalton's partial pressure, the correct answer is the second option: "pressure that is exerted by one gas as if it occupied a container by itself" defines partial pressure in a mixture of gases.

The pressure exerted by a particular gas in a mixture is known as its partial pressure.

So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T}=P_{1} +P_{2} +...+P_{n}[/tex]

where n is the amount of gases present in the mixture.

This relationship is due to the assumption that there are no attractive forces between the gases.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In summary, the correct answer is the second option: "pressure that is exerted by one gas as if it occupied a container by itself" defines partial pressure in a mixture of gases.

Learn more about Dalton's partial pressure:

brainly.com/question/25181467?referrer=searchResults

brainly.com/question/14119417

Explanation:

The given data is as follows.

       [tex]V_{NaOH}[/tex] = 26.25 ml,        [tex]M_{NaOH}[/tex] = 0.1850 m

       [tex]V_{H_{2}SO_{4}}[/tex] = 25.00 ml,   [tex]M_{NaOH}[/tex] = ?

It is known that normality is n times molarity where "n" signifies the number of hydrogen or hydroxide ions.

Therefore, normality of NaOH is calculated as follows.

           [tex]N_{NaOH} = n \times M_{NaOH}[/tex]

                                     = [tex]1 \times 0.1850[/tex]

                                     = 0.1850 N

Normality of [tex]H_{2}SO_{4}[/tex] is calculated as follows.

          [tex]N_{NaOH}V_{NaOH} = N_{H_{2}SO_{4}}V_{H_{2}SO_{4}}[/tex]

              [tex]0.1850 N \times 26.25 ml = N_{H_{2}SO_{4}} \times 25.00 ml[/tex]

                      [tex]N_{H_{2}SO_{4}}[/tex] = 0.194 N      

Hence, molarity of [tex]H_{2}SO_{4}[/tex] will be as follows.

                     [tex]N_{H_{2}SO_{4}} = n \times M_{H_{2}SO_{4}}[/tex]

                    [tex]M_{H_{2}SO_{4}} = \frac{N_{H_{2}SO_{4}}}{n}[/tex]

                                         = [tex]\frac{0.194 N}{2}[/tex]

                                         = 0.097 M

Thus, we can conclude that molarity of the acid solution is 0.097 M.

Answer : True

Explanation : When storing parts outside it is best to keep them under tarps or wrapped to stay in compliance is true, because when we store the parts outside the house there are high chances of the parts getting exposed to environmental moisture. Which will develop rust on the parts and make it useless later on. To avoid this situation it is safer to keep it covered under the tarps or wrap it with something which can protect it from moisture.

The complete electron configuration for the common monatomic ion formed by calcium (Ca) is [Ar]4s².

Calcium (Ca) is located in the second column of the s block. We would expect its electron configuration to end with 4s². The complete electron configuration for calcium is [Ar]4s². When calcium forms a monatomic ion, it loses its two valence electrons, resulting in a 2+ charge and an electron configuration of 1s²2s²2p⁶3s²3p⁶. The calcium ion (Ca²+) is therefore isoelectronic with the noble gas argon (Ar).

In the integumentary system, the white reaction is caused by vasoconstriction, which is the narrowing of blood vessels. The red reaction is caused by vasodilation, which is the widening of blood vessels.

The white reaction and the red reaction are two types of skin reactions that can occur in response to an injury or irritation.

The white reaction is usually a temporary reaction that goes away on its own within a few minutes or hours. The red reaction can last longer, depending on the severity of the injury or irritation. The triple reaction is usually caused by a more severe injury or irritation than the white or red reactions. It can also be a sign of an allergic reaction.

Learn more about integumentary system, here:

https://brainly.com/question/21442141

#SPJ12

The integumentary system undergoes changes as a person ages, resulting in a thinner epidermis and slower wound healing. Both the white and red reactions are affected by these changes.

The integumentary system undergoes changes as a person ages, leading to a thinner epidermis and slower wound healing. These changes are reflected in both the white and red reactions of the integumentary system. The white reaction refers to decreased mitosis in the stratum basale, resulting in a thinner epidermis. The red reaction relates to the reduced ability of the dermis to regenerate, leading to slower wound healing.

https://brainly.com/question/5812878

#SPJ6

You can't substitute HNO₃ for H₂SO₄ because they differ in properties such as acid strength, oxidation powers and ion concentration, which affects the reactions' results in parts 4 and 5.

The substitution of concentrated HNO₃ solution for 3M H₂SO₄ in parts 4 and 5 wouldn't give the same results because of their differing chemical properties, such as their acid strengths, oxidation powers and ion concentrations.

HNO₃, or nitric acid, has an oxidation number of +5 which makes it a stronger acid than H₂SO₄ or sulfuric acid, with a sulfur oxidation number of +4. These acids also differ in their ion concentrations, reflected in the values for their ionization constants, or K values. H₂SO₄ has a higher K value, which means it provides a higher concentration of hydronium ions (H3O+), making it a stronger acid than HNO₃.

A change from H₂SO₄ to HNO₃ can drastically affect the equilibrium concentrations in the solution as well as the ensuing reactions' results. For instance, stronger acids like H₂SO₄ determine the concentration of hydronium ions in the solution, suppressing the ionization of weaker acids. Essentially, exchanging sulfuric acid with nitric acid would alter the system's equilibrium, potentially affecting the results of the reactions in parts 4 and 5.

https://brainly.com/question/29814291

#SPJ12

A neutral atom of potassium (K) has an average mass of 39 amu and 19 electrons. It has 20 neutrons. Thus, the correct option for this question is C.

Electrons may be characterized as the type of subatomic particles which are consistently revolving within the orbitals around the nucleus. These subatomic particles are negatively charged in nature. J.J. Thomson is known as the discoverer of these subatomic particles.

It is clearly mentioned in the question that an atom is neutral which means the number of positively charged particles (protons) is equal to the number of negatively charged particles (electrons). So, the number of protons is also 19.

Now, the number of neutrons is determined by the following formula:

The number of neutrons = Atomic mass - Number of protons.

                                  = 39 - 19 = 20.

Therefore, a neutral atom of potassium (K) has an average mass of 39 amu and 19 electrons. It has 20 neutrons. Thus, the correct option for this question is C.

To learn more about Neutrons, refer to the link:

https://brainly.com/question/26952570

#SPJ5

The answer is there are 9.57 x 10²⁰ number of Cl atoms are in 0.0728 g of PCl₃.

Number of moles = mass / molar mass

Mass of PCl₃ = 0.0728 g and molar mass of PCl₃ = 137.33g/mol

Number of moles of PCl₃ = 0.0728 / 137.33 = 5.3 x 10⁻⁴

In one mole there are Avogadro’s number of molecules that is 6.02 x 10²³

So, in 5.3 x 10⁻⁴ moles of PCl₃, there are =5.3 x 10⁻⁴ x 6.02 x 10²³ = 3.19 x 10²⁰

Now there is 3 atoms of Cl in PCl₃ so in 3.19 x 10²⁰ molecules of PCl₃, number of Cl atoms = 3.19 x 10²⁰ x 3 = 9.57 x 10²⁰ atoms

To find the number of chlorine atoms in a given mass of PCl3, you calculate the number of moles of PCl3, using its molar mass. Then, multiply the number of moles by three (since there are three chlorine atoms in each molecule of PCl3), and then use Avogadro's number to convert the number of moles to atoms. The resulting number is 9.56 x 10^20 Cl atoms.

First, determine the molar mass of PCl3. Phosphorus (P) has an atomic mass of about 31g/mol, and Chlorine (Cl) has an atomic mass of about 35.5 g/mol. Since there are three chlorine atoms in PCl3, the molar mass of PCl3 becomes 31 + 3 * 35.5 = 137 g/mol.

Then, calculate the number of moles in 0.0728 g of PCl3. This is done by dividing the mass of the sample by the molar mass of PCl3: 0.0728 g / 137 g/mol = 0.000531 moles of PCl3.

Since each mole of PCl3 contains three moles of Cl, we multiply the number of moles of the compound by three to get the number of moles of Cl: 0.000531 moles * 3 =  0.00159 moles of Cl.

Then, using Avogadro's number (6.02 x 10^23), we can convert the number of moles to the number of atoms. 0.00159 moles * 6.02 x 10^23 atoms/mol = 9.56 x 10^20 atoms.

So, there are around 9.56 x 10^20 atoms of chlorine (Cl) in a 0.0728 g sample of PCl3.

https://brainly.com/question/35917637

#SPJ6

A lithium atom always contains three protons located in its nucleus, defining its atomic number as 3, regardless of the isotope.

The number and location of protons in a lithium atom is universally three within its nucleus. This constant feature defines the element lithium (Li) and gives it an atomic number of 3. Lithium atoms can, however, have different numbers of neutrons, resulting in isotopes with different mass numbers such as Lithium-6 (three neutrons) and Lithium-7 (four neutrons). Despite these differences, the number of protons remains constant at three, which is a characteristic trait of the lithium element.

The major species when ammonium bromate is dissolved in water are ammonium ions, bromate ions, hydronium ions, and ammonia.

When solid ammonium bromate is dissolved in water, the major species in solution are ammonium ions (NH₄⁺) and bromate ions (BrO₃⁻). In an aqueous solution, the ammonium ion is a weak acid, which can donate a proton to water, forming hydronium ions (H₃O⁺) and ammonia (NH₃), hence making the solution slightly acidic. The bromate ion is a stable species that does not further react in water. Therefore, the major species in solution are NH₄⁺, BrO₃⁻, H₃O⁺, and some unreacted NH₃.

Answer:

the first one is a

the second one is d

Explanation:

Anion solutions are typically prepared using sodium salts rather than calcium salts due to their better solubility and formation of inert anions. Sodium salts readily dissociate into ions in water and do not form insoluble compounds with certain anions unlike calcium salts. This ensures a clear anion solution without precipitates.

Anion solutions are typically prepared using sodium salts rather than calcium salts due to differences in solubility and reactivity. Sodium salts readily dissociate into ions when dissolved in water, producing the required anions. For instance, when the ionic compound of sodium chloride (NaCl) is dissolved in water, it dissociates into sodium (Na+) and chloride ions (Cl-). This creates a 1:1 stoichiometry of cations and anions as given by the formula, NaCl.

On the other hand, calcium salts like Ca(NO3)2 can also dissociate into ions in water, producing Ca²+ cations and NO3¯ anions. However, calcium salts often tend to form insoluble compounds with certain anions. This leads to precipitates in the solution, which could affect the outcome of certain experiments or reactions. Therefore, sodium salts, which are generally more soluble, are preferred for preparing anion solutions.

Apart from solubility factor, another reasoning for choosing sodium salts over calcium is that the former leads to inert anions that can better preserve the acidity or alkalinity of the solution. For example, isolating the chloride anion from a sodium salt results in an inert anion that does not engage in further chemical reactions, thereby maintaining the solution's basicity.

https://brainly.com/question/31419759

#SPJ2

Answer: A mole of Cu atoms has the same number of atoms as a mole of He atoms.

Explanation: Mole is a bigger unit that counts [tex]6.022*10^2^3[/tex]  . For example, one mole of electrons equals to [tex]6.022*10^2^3[/tex] electrons.

One mole of atoms equals to [tex]6.022*10^2^3[/tex] . First choice is correct as we have a mole of Cu and He(equal moles of Cu and He) and so the number of atoms will also be equal.

Second and fourth choices are not correct as a mole neither equals to [tex]6.022*10^2^4[/tex] nor equals to 6.022*10^2^2[/tex] .

Third choice is also not correct as if we have equal moles of carbon and He then number of atoms will be same.

So, the only and only correct choice is the first one. A mole of Cu atoms has the same number of atoms as a mole of He atoms.

Explosion of fireworks represents a chemical change because explosion causes chemical reaction due to which chemical properties change.

Chemical changes occur when chemical reactions take place.During chemical reactions, bonds between atoms break due to which properties change.

Bending of wire only causes change in physical property that is shape and there is no change in chemical properties or constituents of wire.Freezing of water changes the state of water to solid but does not change it's properties.

Melting of wax candle  only changes the state of candle from solid to molten form it does not alter its chemical properties.During explosion of fireworks there is chemical change taking place along with which large amount  of energy is released.

Learn more about chemical change ,here:

https://brainly.com/question/23693316

#SPJ6