Answer:
Explanation:
If we use bracketing, we must take three pictures of the same place, but we must take it with different exposures.
In this particular example we have an exposure of f/16 at 1/125 shutter speed, first we must take underexposed picture with exposure of f/22 at 1/125 shutter speed or exposure of f/16 at 1/400 shutter speed, then we take an overexposed picture with exposure of f/8 at 1/125 shutter speed or exposure of f/16 at 1/50 shutter speed.
The last step is taking the three pictures and use the option bracketing in an editing photo tool, there are cameras that have this option to take 3 pictures automatically.
Which of the following commands would instruct OSPF to advertise ONLY the 192.168.10.0/24 network in Area 0?
Answer:
First, you need to start the OSPF process by executing the command:
Router (config)# router ospf {process-ID#}
Then, you have to instruct the router to advertise the networks that are directly linked to it by entering this network command with the area ID number for that network:
Router (config-router)# network {192.168.10.0} {255.255.255.0} area {0}
The command will advertise ONLY the 192.168.10.0/24 is
router ospf <process-id>
network 192.168.10.0 0.0.0.255 area 0
To instruct OSPF to advertise ONLY the 192.168.10.0/24 network in Area 0, use the network command in OSPF router configuration mode.
The specific command use depends on the router's OSPF process.
Assuming you are using Cisco IOS, the command would be:
router ospf <process-id>
network 192.168.10.0 0.0.0.255 area 0
In this command:
<process-id> should be replaced with the OSPF process ID on the router.
`192.168.10.0` is the network address you want to advertise.
`0.0.0.255` is the wildcard mask, which means the network is 192.168.10.0/24 (since 255.255.255.0 is the subnet mask for /24).
`area 0` specifies that the network should be advertised in Area 0, which is the backbone area in OSPF.
This command will advertise ONLY the 192.168.10.0/24 network in Area 0 and no other networks.
Learn more about OSPF here:
https://brainly.com/question/33618289
#SPJ3
You recently completed a network overhaul over the weekend. Everything seems to be functioning properly until you receive a swarm of help desk support requests, all originating from one specific floor in your building. After a few minutes on the phone with those affected, you determine that no one has indicator lights active on their NICs. What is the most likely problem?
Answer:
Network switch has been disconnected or switched off
Explanation:
An organization networking can be done by using several switches, routers, modems, etc. A network switch works between modem and systems, connecting the systems to the network.
A network switch is a multi-port switch that connects multiple devices to the network. mostly every floor has a network switch connected with the floor systems.
When a system is connected to switch, its indicator light on NIC is active. but as per the scenario, no system has active indicator lights on NIC, which means that there is some problem with the switch or switch is powered off.
A device's mean time between failure (MTBF) rating provides an estimate of how long the device should last?
A) True
B) False
Answer:
True
Explanation:
You have a forest named PLAB and two domains, PLABA and PLABB. You want to add the users from both the domains to a group that should be restricted within the PLABA domain. Which type of group scope should you set for this group?
Global group is also called universal group users.
Explanation:
A network administrator has two domains are such as PLABA AND PLABB. End-user of each domain wants to login both domain PLABA AND PLABB.
Network administrator has created global group accounts user domain and map all the users in the global group user domain. For every user active directory and rights also be mapped. Global group is also called universal group users. Group polices of each user has to be applied and mapped properly.
Once user are mapped and activated user can login from both domain server.
On which tab would you find Access's features for formatting text?
A. File
B. Home
C. Create
D. Format
Answer:
B. Home
Explanation:
In Microsoft Access's database the home tab contains the text formatting group, a feature for formatting texts, it also contains clipboard, sort and filter, and find. the tab provides a place to perform common or repetitive tasks done in MS Access. Access is a database management system provided by microsoft.
You’ve been asked to conduct a penetration test for a small company and for the test, you were only given a company name, the domain name of their website, and the IP address of their gateway router. What describes the type of test?
Answer:
Black box testing
Explanation:
Black box testing is a software testing method where the tester(QA) is provided with minimal information (in this scenario just the company domain name, website and IP address) so as to test just the input and output of the SUT (Software under Test) and he/she does not need to worry about internal code structure of the SUT.
WikiLeaks is a famous not-for-profit whistleblower website. MasterCard and Visa stopped payments to WikiLeaks after a series of leaks by the site. An anonymous group attacked the websites of both MasterCard and Visa reacting to this. These web vandals, who tried to protect WikiLeaks, are called ________.
Answer:
Hacktivists
Explanation:
Hacktivists are individuals who gain unauthorized access to computer networks or information, then use unruly ways to effect social or political change. Hacktivism started as a way of protesting online to effect a change by pushing for a certain outcome. This saw the building of websites such as wiki leaks. Although hacktivists are not entirely driven by malicious intent they employ some tactics used by hackers to drive their message across.
What will display after the following code executes?password = 'ILOVEPYTHON'if password.isalpha(): print('Invalid, must contain one number.')elif password.isdigit(): print('Invalid, must have one non-numeric character.')elif password.isupper(): print('Invalid, cannot be all uppercase characters.')else: print('Your password is secure!')
Answer:
Invalid, must contain one number
Explanation:
The program will assign ILOVEPYTHON to the password variable and start checking the cases stated below.
password.isalpha(): is true for the given password value and the code will execute, the display will show "Invalid, must contain one number." and it will bypass the elif and else statements.
I hope this answer helps.
The ____ term implies that the type’s data can be accessed only through methods.
A. abstract type library
B. advanced data type
C. abstract definition type
D. abstract data type
Answer:
D. abstract data type
Explanation:
Abstract data type is a data type whose implementation is embedded behind an abstraction. They can be worked via methods and functions but their specification is abstracted.
Lists and Stacks can be given as examples of abstract data types.
Abstract data type can be considered as the opposite of Concrete Data Type (CDT).
Final answer:
The abstract data type (ADT) is the correct term that refers to a type where its data is accessible only through specific methods, providing encapsulation of data.
Explanation:
The abstract data type (ADT) term implies that the type’s data can be accessed only through methods. This encapsulates the data and only allows it to be accessed or manipulated through a defined set of operations. ADTs provide a mathematical model for data types where data and operations are defined independently of any specific implementation.
This abstraction allows for different implementations that can vary internally but share the same external interface. An example of an ADT is a stack, which provides operations such as push, pop, and peek without revealing the underlying data structure, whether it be an array, list, or any other method of internal representation.
PowerPoint:
In the Outline pane, a highlighted slide icon next to the slide number indicates that the slide is selected.
True or False?
Answer:
The following statement is True.
Explanation:
Because in the powerpoint presentation, the outline pane is the icon that is next to the slide number which signifies the highlighted slide in which the user is selected. The PowerPoint presentation is an application or software in which the users create their presentation for the offices, schools, and colleges, etc on the slides.
Answer:
True
Explanation:
True
outline pane in power point is a type of navigation panel which major function is to give a broad view of the current document, to take overview of an alignment, or for any change.
It is available on view tab under the heading of presentation views group. it appear on the left side of the screen with different heading to operate.
Select the characteristics of a Base Transceiver Station:
A. connected to a cell tower
B. sends phone signals to the cellular provider's Mobile Switching Station (MSS)
C. sends phone signals to the recipient's Mobile Switching Station (MSS)
D. broadcasts weak microwave signals to create "cells" of mobile coverage
Answer:
The correct answer to the following question is options A, B, and D.
Explanation:
Base Transceiver Station (BTS) is an apparatus that works wireless communication between the network and user equipment (UE - Mobile phones (handset), wireless network computers). Wireless technologies like wi-fi, GSM, CDMA, etc.
Some elements of BTS :
Radio base stationTower/MastDuplexerTransceiver unit (TRU)MicrowaveSo the above are the elements of the BSA, then it also having the characteristics related to these elements like it definitely connects to a cell network, sends phone or mobile phone and microwave signals to cellular providers but it isn't able to send the signals to the recepients.
A Base Transceiver Station (BTS) is connected to a cell tower, sends signals to the provider's Mobile Switching Station (MSS), and broadcasts weak microwave signals.
Explanation:The characteristics of a Base Transceiver Station (BTS) are:
Connected to a cell tower: A BTS is connected to a cell tower, which allows it to transmit and receive signals to and from mobile phones.Sends phone signals to the cellular provider's Mobile Switching Station (MSS): A BTS sends phone signals to the cellular provider's MSS, which handles the routing of calls and messages.Broadcasts weak microwave signals to create "cells" of mobile coverage: A BTS broadcasts weak microwave signals to create cells of mobile coverage, enabling mobile phones to be used while changing location.if are reseachers is using data that are low in cost and save time which type of data is this likely tro be
Answer:
Internet or online data.
Explanation:
There are different sources of data, through questionnaire, database, online etc.
Questionnaires are writing or printed guides to data collection given to individuals to give answer to the questions based on their perspective. For a questionnaire to be ready, questions are formulated, typed and printed with copies. The questionnaires are taken to the target subjects. The time taken to implement this can be overwhelming. Databases on the other hand needs paid skills and time to setup.
The internet has readily available resources, anybody can access its unlimited resources with just an internet connection.
Use the convert command to convert the D: drive to use NTFS instead of FAT32 without destroying any existing data on the disk. If you format the drive, all existing data will be lost. Converting the drive keeps the existing data, but switches the volume to use the NTFS file system.
Answer:
Following steps can be followed to convert disk From FAT 32 to NTFS.
1. Open cmd (Command Prompt)
2. In cmd type the following:
d: /fs:ntfs
To convert the D: drive to use NTFS instead of FAT32 without losing data, use the Windows convert command. Remember to back up your data before making any changes.
To convert the D: drive from FAT32 to NTFS without losing data, you can use the convert command in Windows. This process switches the file system without formatting the drive, preserving the existing data.
For example, you can open a Command Prompt window and type convert D: /fs:ntfs to convert the D: drive to NTFS. Remember, if you format the drive, all data will be lost.
It's crucial to backup your data in multiple locations before attempting any changes to avoid data loss.
Riser cards on some proprietary systems plug into a unique socket or slot on the motherboard. These are also called________
Answer: Daughter board
Explanation:
A daughter board is refers to the circuit board and it is basically connected to the motherboard directly without any interruption.
It is also known as a daughter card which plugs and then extended the circuitry by connecting with the another circuit board. A mezzanine card and the riser card are the examples of the daughter board that used in the system.
According to the question, the riser card basically plus into the unique socket or the slot in the board and this is known as the daughter board.
Therefore, Daughter board is the correct answer.
What tag allows you to tell Google Ads which specific customer actions should be tracked as a conversion?A) An event tagB) An analog tagC) A global site tagD) A temporary tag
Answer:
The tag which allows you to tell Google Ads which specific customer actions should be tracked as a conversion is:
A) An event tag
Explanation:
The option A is correct as the event tag takes record of clicks and impressions of the customer as well as you can add some other functionality by changing the settings option. So, this tag allows you to tell Google Ads which specific customer actions should be tracked as conversion.The option b and d are incorrect as such tags don't exist in google ads.The option c is also incorrect as the global tag is used to send the date of event to other applications like Google Analytics, Campaign Manager etc.As the manager for network operations at his company, Shane saw an accountant in the hall who thanks him for keeping the antivirus software up to date. When asked what he means, he mentions one of the IT staff members named Michael called him yesterday and remotely connected to his PC to update the antivirus…but there’s no employee named Michael. What happened?A) IP spoofingB) MAC spoofingC) Man-in-the-middle attackD) Social engineering
Answer:
D. Social engineering.
Explanation:
In IP spoofing, ip packets with a false ip address source is created with the sole intent on impersonating a client system in a network.
MAC (media access control) address spoofing is similar to ip spoofing, but is related to stealing MAC integrity to impersonate a system.
So, man in the middle security attack is very much related to an active member of a company planting security threat codes to gain access to restricted networks.
Social engineering clearly describes this scenario, as the culprit is not a member of company but played on the ignorance of a member.
Once you create a slide show, it is not easy to rearrange things, so you should plan your presentation ahead of time.
A. True
B. False
Answer:
The following statement is False.
Explanation:
The following statement is incorrect because if the user create its slideshow in the MS PowerPoint or any other presentation application or software then, they can easily edit or rearrange the following thing any time that is written by the user in the slide of the presentation, so there is not any difficulty to edit or rearrange things.
The ability for a protocol or program to determine that something went wrong is known as_________.
Answer:
The correct answer to the following question will be Error-detection.
Explanation:
Error-detection: The detection of errors caused during the transmission from the transmitter to the receiver by damage and other noises, known as Error-detection. This error-detection has the ability to resolute if something went wrong and if any error occurs in the program.
There are mainly three types of error-detection, these types can be followed:
Automatic Repeat Request (ARQ)Forward Error CorrectionHybrid SchemesThere are two methods for error-detection, such as:
Single parity checkTwo-dimensional parity checkCompanies normally pay for PaaS solutions on demand for the resources they consume, usually on a per-user basis.
True
False
Answer:
True
Explanation:
There are companies like Google, Amazon and Microsoft that renders cloud services. There are different type of cloud computing, they platform as a service (paas), Infrastructure as a service (IaaS) and software as a service (SaaS).
Platform as a service is a type of cloud computing that provides a platform for its users to run, develop and maintain applications without having to build and maintain the infrastructure for developing and launching applications.
Companies like Google offers these services to users range from a personal project to a company of 500 personnels, charging for individual access to the service.
A blog is best defined as:
A. a web site primarily involved in tracking people's behavior on the Internet.
B. a web site that typically acts as brokers for advertisers and web sites.
C. a smaller version of the banner that often look like an icon and usually.
D. a reverse chronological journaling site.
E. a little billboard that spreads across the top or bottom of the web page.
Answer:
D. a reverse chronological journaling site.
Explanation:
A blog is a website regularly updated with relevant topics, it usually displays information in reverse chronological order, where the last item added is displayed first. blog ( originally weblog ) simply is journal that is hosted online where people have access to it for educational or informational purposes.
Which is true about POP3 and IMAP for incoming email?
(a)Both keep email on an email server by default
(b)IMAP keeps email on an email server by default
(c)Neither keep email on an email server by default
(d)POP3 keeps email on an email server by default.
Answer:
Both keep email on an email server by default is true about POP3 and IMAP for incoming email
Explanation:
POP3 and IMAP have used setting parameters for incoming email in MS-outlook and lotus domino to receive emails for the end-user.
Normally pop3 will nor keeps mail in emails in the server. once the end-user receives mails for the specific account it deletes emails from the email server.
But IMAP keeps mail in the email server. So the end-user can retrieve the old emails in case he formatted or lost emails.
But email account has some limitation in size. If it is IMAP setting period cleaning should be done in the email server. If it is not done the end-user will not receive any email unless or until deleting the old emails.
Best method is to have pop3 account. But in pop3 still setting can be done in email server not delete for specific period of time.
Engineers involved in product design and manufacturing use computer-aided design/computer-aided manufacturing (CAD/CAM) systems, which is an example of specialized information systems called knowledge work systems (KWSs) that create information in their areas of expertise.?
Engineers who are involved in product design and manufacture of computer-aided should have enough knowledge in circuit and auto cad electronic design.
Explanation:
He or she should have mother board, voltage in or out extra. Person who develops should enough knowledge on circuit design which capacitor, resistance and voltage and processor capacity.
Each design they have first simulates and tested and result should be recorded. On simulation test success design is made.
There is third party software also available for design the circuit and gives the tested results as report.
On a Linux system it is considered bad manners to create files and folders in the _______________ directory.
Answer:
Root
Explanation:
Linux is an open source operating system which receives command from the user and communicates with the hardware, and in Linux the root directory is the top level directory that contains all other directory, it is not recommended to create files and folders in the root directory because the commands the user enters may change files that the operation system may depend on for usage.
David owns a retail business that just implemented a web app to supplement sales. He needs to choose an attribution partner to integrate the app for in-app conversion tracking. Which two are available attribution providers? (Choose two.)
1. Google Firebase2. Google Analytics3. Google Play4. Salesforce
Answer:
Option 1 and 3 i.e., Google Firebase and Google Play is the correct answer.
Explanation:
Because david started a business and he creates web application for the sales of the their business then, he required those two applications for tracking and by which the other users get their application.
Google Firebase: is referred to an application which provide users fix their application crashes and upload their application on the google store.Google Play: is referred to an application by which the owner easily provide their application to their users.Host A has IP address/network mask: 192.168.3.222/27
Host B has IP address/network mask: 192.168.3.225/27
Given the information above, it can be inferred that:
Group of answer choices
Both host A and host B are on the same network
Host A and Host B are on different networks
Host A and Host B will have the same routing tables
Host A and Host B will be able to communicate directly without an intervening router.
Answer:
The first option can be inferred.
Explanation:
IP address stands for Internet Protocol Address and is assigned to every device that is connected to a computer network or the internet so that they can be identified and located.
The fact that the IP addresses are starting with 192.168 means that they are private IP addresses and is assigned by the router. Since both host A and host B have IP addresses starting with 192.168, it can be inferred that they are both on the same network.
I hope this answer helps.
Given an int variable datum that has already been declared, write a few statements that read an integer value from standard input into this variable.
Answer:
Following are the Statement in the Java Language .
Scanner out = new Scanner( System.in); // creating the object
datum = out.nextInt(); // Read the integer value bu using the instance of scanner class
Explanation:
In the Java Programming Language The scanner class is used for taking the user input from the standard input The definition of scanner class is java.util package means that if you taking the input by using scanner class firstly importing the predefined package i.e Java.util.
The description of the above code is given below
Scanner out = new Scanner( System.in);: This statement created the instance "out" of the scanner class which is used for taking the input.datum = out.nextInt(); : This statement taking the integer input and store them into the datnum variable.Consider the abstract superclass below:
public abstract class Foo
{
private int a;
public int b;
public Foo( int aVal, int bVal )
{
a = aVal;
b = bVal;
} // end Foo constructor
public abstract int calculate();
} // end class Foo
Any concrete subclass that extends class Foo:
1) Must implement a method called calculate.
2) Will not be able to access the instance variable a.
3) Neither (a) nor (b).
4) Both (a) and (b).
Answer:
4) Both (a) and (b).
Explanation:
In addition to regular classes, Java has abstract classes. An abstract class is like a regular class. You can also define fields and methods in an abstract class, while at the same time, you cannot create an object or an instance of an abstract class. Abstract classes are designed to provide basic functionality for derived classes while derived classes required to implement this functionality.
A derived class must override and implement all abstract methods that are in the base abstract class. Therefore answer a (1) is correct.
Access modifier for the field a was private which means it has to be provided with accessor methods to obtain/modify its value. Therefor answer b (2) is correct as well.
Write a function named get_first_name that asks the user to enter his or her first name and returns it.
Answer:
def get_first_name( ):
My_name = input('Please What is Your Name')
return My_name
Explanation:
In Python Programming Language, we define the function def get_first_name
The function receives no parameters.
On line two, the function uses the input function to request for a users name and assigns
On line three, it returns the the name entered by the user.
Final answer:
The function 'get_first_name' asks the user to enter their first name using Python's input function and returns the value entered by the user.
Explanation:
To create a function named get_first_name that prompts the user to enter their first name and returns it, you can use Python's input function. Below is a step-by-step example of how the function might look:
def get_first_name():
# Prompt the user for their first name
first_name = input("Please enter your first name: ")
# Return the entered first name
return first_name
When you call the get_first_name function, it will ask the user to enter his or her first name and store the input in a variable. After that, it returns the stored value when the function completes.
__ view is a special view that you typically use when showing a presentation through two monito
Answer: presenter view
Explanation:
Presenter view is used to show a presentation from two displays such as laptop,monitor, projector screen
What are the two main purposes of S/MIME?
Digital signatures
Encryption
Junk mail prevention
Spam prevention
The two main purpose of S/MIME are digital signatures and encryption
Explanation:
The Secure Multipurpose Internet Mail Extension is used to protect the data that is the data will be encrypted and it is used in security purpose and gives authentication at the receiver and at the sender side
This public key also allows the users to digitally sign the mail and check for the fraudulent in cases thus it allows the digital signing of mails and envelops the data and it is defined in detail in the RFC 3369 and 3370
This has now been also layered in the Cryptographic message syntax