Sometimes, as we learned in this lesson, a single Lewis structure does not describe a molecule, and it instead resonates between two or more structures. What symbol do we place between these structures to show this?

A. ←
B. ≡
C. ↔
D. →

To calculate the concentration of a solution, moles of solute are divided by the final volume in liters. Without the specific mass of silver perchlorate, we cannot determine the concentration of the solution.

To calculate the concentration of the chemist's silver perchlorate solution, we need to know the mass of silver perchlorate used and the final volume of the solution. The details of the mass have been omitted from the question, but typically, you would use the molar mass of silver perchlorate to determine the number of moles. To prepare a solution of desired concentration, the chemist would dissolve silver perchlorate in a volumetric flask and add water to the mark, ensuring the final volume accounts for the space occupied by the dissolved solute.

Once a known mass of silver perchlorate is dissolved to make a known final volume, the molarity (M) can be calculated by dividing the number of moles of silver perchlorate by the final volume of the solution in liters. For example, if we dissolved 50 grams of silver perchlorate and the molar mass is X g/mol, we would first calculate the moles as 50 g / X g/mol. Then if the final volume of the solution is 1 L, the concentration would be 50 g / X g/mol / 1 L = Y M.

If the question had provided specific values, we would use them in the calculation and round the answer to the appropriate number of significant digits. However, without the exact mass of silver perchlorate used, we cannot complete this calculation.

Answer:

Fracking involves the ______drilling to extract oil and natural gas from the rock. Select one: a. vertical b. lateral c. horizontal

The answer is option C (horizontal)

Explanation:

Fracking commonly known as Hydraulic fracturing is an oil and gas production technique that has enabled the extraction of oil and gas from rock (shale rock).

A fracturing fluid typically water with additives is pumped under high pressure into the drilling pipe to widen fractures in the rock or to create new ones and and allow trapped gas or crude oil to flow through a pipe to a wellhead at the surface, deep holes are drilled down into the shale rock. These fractures are held open by an injected proppant, typically sand and release hydrocarbons. Fracking takes about three to five days. Since shale reserves are typically distributed horizontally rather than vertically, horizontal directional drilling method is employed.

Some of the impacts of Fracking on the environment are:

Fracking, or hydraulic fracturing, primarily involves horizontal drilling. Starting vertically, the drill transitions to a horizontal path to enhance contact with gas or oil-bearing rocks, thereby improving extraction efficiency.

Fracking, also known as hydraulic fracturing, involves the horizontal drilling to extract oil and natural gas from the rock. The process begins with a vertical hole that reaches the desired depth and then transitions into lateral or horizontal drilling. This allows for increased contact with the oil or gas-bearing rock, improving the extraction process and its efficiency.

https://brainly.com/question/31882173

#SPJ3

The order of increasing solubility in water for O2, Br2, LiCl, and methanol (CH3OH) is: O2 < Br2 < LiCl < Methanol (CH3OH). This is based on whether the molecules are nonpolar or polar and the intermolecular forces present.

The solubility of compounds in water ultimate depends on the specific intermolecular interactions. The key principle here is 'like dissolves like', with polar substances dissolving in polar solvents (like water) and nonpolar substances dissolving in nonpolar solvents.

In your list: O2, LiCl, Br2, and methanol (CH3OH), the order of increasing solubility in water would in fact be: O2 < Br2 < LiCl < Methanol (CH3OH)

https://brainly.com/question/24300575

#SPJ6

The order of increasing solubility in water is O₂ < Br₂ < LiCl < CH₃OH.

To arrange these compounds in order of increasing solubility in water, we need to consider their polarity and ability to form hydrogen bonds with water. Water is a polar solvent and dissolves polar compounds and ionic compounds well, but non-polar compounds poorly.

Therefore, the order of increasing solubility in water is O₂ < Br₂ < LiCl < CH₃OH.

Answer:ΔH < 0, ΔS > 0

Explanation:

Consider ∆G= ∆H-T∆S

If ∆H is negative and and ∆S is positive, when T is increased, T∆S becomes more positive until the result of the difference between ∆H-T∆S becomes negative. Remember that a reaction is only spontaneous when ∆G is negative. Hence under these conditions, ∆G becomes negative and the reaction becomes spontaneous.

Answer:

ThOD =239.792 mg/L

Explanation:

Theorical Oxigen demand (ThOD):

is the theoretical amount of oxygen

required to oxidize the organic fraction of a

waste up to carbon dioxide and water.

⇒ C sln = 450 mg C6H12O6 / 2 L H2O = 225 mg/L sln

∴ mm C6H12O6 = 180.156 g/mol

balanced reaction:

∴ mol C6H12O6 = 1 mol

⇒ mass C6H12O6 = (180.156 g/mol)( 1 mol) = 180.156 g

∴ the value of ThOD is determined when 180.156 g C6H12O6 consume mass O2 = 6(32) = 192 g Oxygen;  then in a solution of 225 mg/L, you have:

⇒ ThOD = (192/180.156)×225 mg/L

⇒ ThOD = 239.792 mg/L

The theoretical oxygen demand is 0.24 g/L or 240mg/L.

To calculate the theoretical oxygen demand of a solution containing 450mg of glucose (C6H12O6) in 2 L of distilled water, we need to start by determining the stoichiometry of the complete combustion of glucose, which can be represented by the balanced chemical equation:

C6H12O6 + 6O2 → 6CO2 + 6H2O

From the equation, we can see that 1 mole of glucose requires 6 moles of oxygen to completely react. Therefore, to calculate the oxygen demand, we first need to find the number of moles of glucose present in the solution:

The molar mass of glucose (C6H12O6) is approximately 180 g/mol. So, 450 mg of glucose is equal to 0.450 g or 0.450/180 = 0.0025 moles of glucose.

Using the stoichiometry from the equation, the moles of oxygen required is 0.0025 moles of glucose  imes 6 moles of oxygen/mole of glucose = 0.015 moles of oxygen.

Now, the molar mass of oxygen (O2) is approximately 32 g/mol, hence 0.015 moles  imes 32 g/mol = 0.48 grams of oxygen. Since the solution volume is 2 L, we need to find the amount per liter, which gives us 0.48 g / 2 L = 0.24 g/L or 240 mg/L of theoretical oxygen demand.

Answer:

Option B and D

Explanation:

The Gibb's free energy also referred to as the gibb's function represented with letter G. it is the amount of useful work obtained from a system at constant temperature and pressure. The standard gibb's free energy on the other hand is a state function represented as Delta-G, as it depends on the initial and final states of the system.

A feasible way to synthesize the product entails the spontaneity of the reaction.

The spontaneity of a reaction is explained by the standard gibb's free energy.

If Delta-G = -ve ( the reaction is spontaneous)

if Delta -G = +ve ( the reaction is non-spontaneous)

if Delta-G = 0 ( the reaction is at equilibrium)

Hence the option (B and D) with negative Gibb's free energy are the reaction that are spontaneous.

Answer:

it same mass as water

Explanation:

Final answer:

The steam resulting from boiled water will have the same mass as the water from which it was boiled, adhering to the law of conservation of mass, as long as the system is closed and no mass is lost due to external factors.

Explanation:

When you boil a sample of water, the steam that results will have the same mass as the water if you ignore any minor mass loss due to gases dissolved in water escaping or small amounts of water that may stick to the container. This is because the mass of a substance remains constant during a phase change; only the state of the substance changes from liquid to gas. This is in accordance with the law of conservation of mass.

The mass of a substance does not change as it undergoes physical transformations; thus, when you boil water, all of the mass is converted to steam provided the system is closed and no mass escapes. In an open system, there might be a loss of mass due to external factors, but the boiling process itself does not add or remove mass from the water.

To find the vapor phase composition of a mixture of 1-propanol and 2-propanol at 25 °C, we apply Raoult's Law and Dalton's Law using the given vapor pressures and mole fraction. The calculated vapor phase composition is y1 = 0.2744 for 1-propanol and y2 = 0.7256 for 2-propanol.

The question asks for the composition of the vapor phase at 25 °C for a liquid mixture of 1-propanol and 2-propanol with a given mole fraction of 1-propanol (x1 = 0.450). According to Raoult's Law, the partial pressure of each component in an ideal solution is equal to the mole fraction of the component in the liquid phase times the vapor pressure of the pure component. The total vapor pressure (Ptot) of the solution is the sum of the partial pressures. We can then use Dalton's Law to find the mole fractions of the components in the vapor phase.

To calculate the composition of the vapor phase, we will use the following steps:

Calculate the partial pressure of 1-propanol (P1) using the formula P1 = x1 × P1°, where P1° is the vapor pressure of pure 1-propanol.

P1 = x1 × P1° = 0.450 × 20.9 Torr = 9.405 Torr

Calculate the partial pressure of 2-propanol (P2) using the formula P2 = x2 × P2°, where P2° is the vapor pressure of pure 2-propanol and x2 is the mole fraction of 2-propanol in the liquid phase.

Since the mole fractions must sum to 1,

x2 = 1 - x1 = 1 - 0.450 = 0.550.

Now we calculate P2 = x2 × P2° = 0.550 × 45.2 Torr = 24.86 Torr.

Ptot = P1 + P2 = 9.405 Torr + 24.86 Torr = 34.265 Torr

Calculate the mole fraction of 1-propanol in the vapor phase (y1) using y1 = P1 / Ptot.

y1 = P1 / Ptot = 9.405 Torr / 34.265 Torr = 0.2744

Calculate the mole fraction of 2-propanol in the vapor phase (y2) using y2 = P2 / Ptot.

y2 = P2 / Ptot = 24.86 Torr / 34.265 Torr = 0.7256

Thus, the composition of the vapor phase at 25 °C for the solution with x1 = 0.450 is y1 = 0.2744 and y2 = 0.7256.

Answer:

a. Cation

b. Anion

Explanation:

Answer:

Lower  

Explanation:

Surface tension occurs because molecules at the surface do not have molecules above them, so they cohere more strongly to their neighbours.

The stronger cohesive forces make it more difficult to move an object through the surface than when it is beneath the surface.

The attractive forces in water are strong because of hydrogen bonding.

A hexane molecule is nonpolar, so the only attractions are the weak London dispersion forces.

The cohesive forces at the surface are much lower than those in water, so the surface tension of hexane is lower than that of water at the sane temperature.

Answer:

0.002% w/v

Explanation:

The unit w/v means that mass (in g) per volume (in mL). When the solution is diluted, the mass of the solvent will not change, and the mass can be calculated by the concentration (C) multiplied by the volume (V). So, if 1 is the initial solution, and 2 the diluted solution:

C1*V1 = C2*V2

C1 = 0.02%

V1 = 1 mL

V2 = 10 mL

0.02*1 = C2*10

10C2 = 0.02

C2 = 0.002% w/v

Answer:

2.1 × 10⁻¹ M

2.0 × 10⁻¹ m

Explanation:

Molarity

The molar mass of aniline (solute) is 93.13 g/mol. The moles corresponding to 3.9 g are:

3.9 g × (1 mol/93.13 g) = 0.042 mol

The volume of the solution is 200 mL (0.200 L). The molarity of aniline is:

M = 0.042 mol/0.200 L = 0.21 M = 2.1 × 10⁻¹ M

Molality

The moles of solute are 0.042 mol.

The density of the solvent is 1.05 g/mL. The mass corresponding to 200 mL is:

200 mL × 1.05 g/mL = 210 g = 0.210 kg

The molality of aniline is:

m = 0.042 mol/0.210 kg = 0.20 m = 2.0 × 10⁻¹ m

Answer:

d = 3.11 g /cm³

Explanation:

Volume -

The volume of a cuboidal object can be calculated by multiplying the length , width and height ,

Hence , Volume ( V ) = l * w * h ,

From the question ,

l = 8.2 cm

w = 3.8 cm

h = 7 cm

Hence, the volume is ,

V = l * w * h

V = 8.2 cm * 3.8 cm * 7 cm

V = 218.12 cm³

Density -

Density of a substance is given as the mass divided by the volume ,

Hence,

d = m / V

From the question,

m = 0.68 kg

since ,

1 kg = 1000g

m = 0.68 * 1000 = 680 g

V = 218.12 cm³ ( calculated above )

Hence , the value of density can be calculated by using the above equation,

d = m / V

d = 680 g / 218.12 cm³

d = 3.11 g /cm³

Answer:

Explanation:

In the attached picture you may find the structure of betaxolol.

You can see the alcohol group C-O-H as well as the ether group C-O-C.

The arene -or aromatic ring- can also be seen.

There's also a secondary amine group, C-NH-C.

Explanation:

As per Le Chatelier's principle, any disturbance caused in an equilibrium reaction will tend to shift the equilibrium in a direction away from the disturbance.

Since, the given reaction is exothermic in nature so, when we increase the temperature then reaction will shift in the direction opposing the increase in temperature. Hence, the equilibrium will shift on left side when we increase the temperature.

On the other hand, when we decrease the temperature then the equilibrium will shift on the right side.

The correct classifications for the actions based on the given are as follows:

a. Increase the temperature: This causes a rightward shift in the direction of the net reaction.

b. Decrease the temperature: This causes a leftward shift in the direction of the net reaction.

For a chemical reaction at equilibrium, Le Chatelier's Principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium moves to counteract the change.

The reaction in question has a standard enthalpy change of 156 kJ, which indicates that the reaction is exothermic (releases heat).

a. Increase the temperature:

When the temperature is increased for an exothermic reaction, the system tries to absorb the excess heat to restore equilibrium. Since the forward reaction releases heat, the system will favor the reverse reaction to absorb heat. However, because the forward reaction is exothermic and already releases heat, increasing the temperature actually provides energy to the system, which drives the reaction forward to consume the added energy. Therefore, increasing the temperature causes a rightward shift in the direction of the net reaction.

b. Decrease the temperature:

Conversely, when the temperature is decreased, the system tries to release heat to restore equilibrium. For an exothermic reaction, the forward reaction releases heat, so decreasing the temperature will favor the forward reaction to release heat and restore equilibrium. Therefore, decreasing the temperature causes a leftward shift in the direction of the net reaction, favoring the products since the forward reaction is exothermic and will release heat.

In summary, for an exothermic reaction, increasing the temperature will shift the equilibrium to the right (towards the products), and decreasing the temperature will shift the equilibrium to the left (towards the reactants).

Answer:

1.40*10⁻² M

Explanation:

We have the solubility formula

Solubility,

S = KH*P  

where

KH = measure of hardness of water / carbonate hardness = 3.50*10⁻² mol/L.atm

P = atmospheric pressure = 0.400 atm

Hence, we have

S = KH*P

= (3.50*10⁻² mol/L.atm)*(0.400 atm)

= 1.40*10⁻² mol/L

But 1 mol/L = 1 M,

Hence, the answer (1.40*10⁻² mol/L ) is equivalent to

= 1.40*10⁻² M

Answer : The concentration of a solution with an absorbance of 0.460 is, 0.177 M

Explanation :

Using Beer-Lambert's law :

[tex]A=\epsilon \times C\times l[/tex]

where,

A = absorbance of solution

C = concentration of solution

l = path length

[tex]\epsilon[/tex] = molar absorptivity coefficient

From this we conclude that absorbance of solution is directly proportional to the concentration of solution at constant path length.

Thus, the relation between absorbance and concentration of solution will be:

[tex]\frac{A_1}{A_2}=\frac{C_1}{C_2}[/tex]

Given:

[tex]A_1[/tex] = 0.350

[tex]A_2[/tex] = 0.460

[tex]C_1[/tex] = 0.135 M

[tex]C_2[/tex] = ?

Now put all the given values in the above formula, we get:

[tex]\frac{0.350}{0.460}=\frac{0.135}{C_2}[/tex]

[tex]C_1=0.177M[/tex]

Therefore, the concentration of a solution with an absorbance of 0.460 is, 0.177 M

Beer's Law states that there is a linear relationship between the concentration of a substance in a solution and its absorbance. We can use the equation c = A/(εb) to solve for the concentration of a solution with a given absorbance.

Beer's Law states that there is a linear relationship between the concentration of a substance in a solution and its absorbance. The equation for Beer's Law is A = εbc, where A is the absorbance, ε is the molar absorptivity, b is the path length of the cell, and c is the concentration.

In this case, we have the absorbance (0.350) and concentration (0.135 M) for a solution of Co2+. We can rearrange the equation to solve for the concentration: c = A/(εb). Plug in the given values to find the molar absorptivity and path length, and then substitute those values into the equation to calculate the concentration of a solution with an absorbance of 0.460.

https://brainly.com/question/30762062

#SPJ11

This is an incomplete question, here is a complete question.

Specify which atoms, if any, bear a formal charge in the Lewis structure given and the net charge for the species. Be sure to answer all parts.

[tex]:C\equiv N:[/tex]

a. Formal charge C:___________.

b. Formal charge N:________.

d. Net charge:________.

Answer :

a. Formal charge C : (-1) charge

b. Formal charge N : (0) charge

d. Net charge : (-1) charge

Explanation :

Lewis-dot structure : It shows the bonding between the atoms of a molecule and it also shows the unpaired electrons present in the molecule.

In the Lewis-dot structure the valance electrons are shown by 'dot'.

The given molecule is, [tex]CN^-[/tex]

As we know that carbon has '4' valence electrons and nitrogen has '5' valence electrons.

Therefore, the total number of valence electrons in [tex]CN^-[/tex] = 4 + 5 + 1 = 10

According to Lewis-dot structure, there are 6 number of bonding electrons and 4 number of non-bonding electrons.

Now we have to determine the formal charge for each atom.

Formula for formal charge :

[tex]\text{Formal charge on C}=4-2-\frac{6}{2}=-1[/tex]

[tex]\text{Formal charge on N}=5-2-\frac{6}{2}=0[/tex]

Thus, the net charge will be = -1 + 0 = -1

Answer:

0.4g

Explanation:

1.0% (w/v%) = 1 g of agarose 100 ml of Tris-Acetate-EDTA,  this is the buffer that agarose is run with

the amount of agarose for 40 ml = 1 /100 × 40 ml = 0.4 g  

Final answer:

To prepare 40 mL of a 1.0% (w/v %) agarose gel, measure and mix 0.4 grams of agarose powder with 40 mL of buffer solution in an Erlenmeyer flask.

Explanation:

If you are asked to make 40 mL of a 1.0% (w/v %) agarose gel, you will add 0.4 grams of agarose to the 40 mL of buffer. To made this calculation, you need to understand the meaning of w/v %, which stands for weight/volume percentage. It is defined as the mass of a solute (in this case agarose powder) divided by the volume of the solution, and then multiplied by 100 to get the percentage.

For a 1.0% (w/v %) agarose gel, this means that you need 1 gram of agarose powder for every 100 mL of solution. Therefore, for 40 mL of solution, you simply use the proportion:

1 gram/100 mL = X grams/40 mL

Solving for X gives you:

X = (1 gram/100 mL) * 40 mL = 0.4 grams

Conclusion: To prepare a 40 mL agarose gel at 1.0% w/v concentration, weigh out 0.4 grams of agarose powder using an electronic scale, and then blend it with the appropriate buffer in an Erlenmeyer flask.

Answer: The molarity of HCl of this 37% aqueous HCl solution is 12.0 M

Explanation:

Given : 37 g of HCl is dissolve in 100 g of solution.

Mass of solute (HCl) = 37 g

Mass of solution = 100 g

Density of solution = 1.18g/ml

Volume of solution =[tex]\frac{\text {mass of solution}}{\text {density of solution}}=\frac{100g}{1.18g/ml}=84.7ml[/tex]

Molarity is defined as the number of moles of solute dissolved per liter of the solution.

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n= moles of solute  

[tex]V_s[/tex] = volume of solution in ml = 1000 ml

[tex]moles of solute =\frac{\text {given mass}}{\text {molar mass}}=\frac{37g}{36.5g/mol}=1.01moles[/tex]

Now put all the given values in the formula of molarity, we get

[tex]Molarity=\frac{1.01moles\times 1000}{84.7ml}=12.0mole/L[/tex]

The molarity of HCl solution is 12.0 M

Answer:

[tex]\Delta G_{rxn}^{0}=-117.4kJ/mol[/tex]

Explanation:

Gibbs free energy is an additive property.

[tex]2ClF(g)\rightarrow Cl_{2}(g)+F_{2}(g)[/tex] ; [tex]\Delta G_{1}^{0}=-115.4kJ/mol[/tex]

[tex]Cl_{2}(g)+Br_{2}(g)\rightarrow 2ClBr(g)[/tex] ; [tex]\Delta G_{2}^{0}=-2.0kJ/mol[/tex]

----------------------------------------------------------------------------

[tex]2ClF(g)+Br_{2}(g)\rightarrow 2ClBr(g)+F_{2}(g)[/tex] ; [tex]\Delta G_{rxn}^{0}=\Delta G_{1}^{0}+\Delta G_{2}^{0}=(-115.4-2.0)kJ/mol=-117.4kJ/mol[/tex]

So, standard gibbs free enrgy change for the given reaction is -117.4 kJ/mol

The change in free energy is called G (∆G). The  [tex]\rm \Delta G^\circ rxn= -117.4\; kj/mol[/tex]

Gibb free energy is the measure of the maximum amount of reversible work done in a thermodynamic system.

It means only when the temperature change, but the pressure is constant.

[tex]\rm Cl_2(g) + F_2(g) \longrightarrow 2ClF(g) \;delta\; G\;degree_rxn = 115.4 kJ/mol[/tex]

[tex]\rm Cl_2(g) + Br_2(g) \longrightarrow 2ClBr(g) \;delta\; G \;degree_r_x_n = -2.0 kJ/mol[/tex]

[tex]\rm \Delta G^\circ rxn= \Delta G^\circ1 +G^\circ2[/tex]

[tex]2ClF(g) + Br_2(g) \longrightarrow 2ClBr(g) + F_2(g)[/tex]

[tex]\rm \Delta G^\circ rxn= -115.4\;kj/mol - 2.0 \;kj/mol = -117.4\;kj/mol[/tex]

Thus, the [tex]\rm \Delta G^\circ rxn= -117.4\; kj/mol[/tex].

Learn more about Gibbs free energy, here:

https://brainly.com/question/9552459

Answer:

The activation energy for the reaction is, 1.90682  KJ/mol.

Explanation:

According to the Arrhenius equation,

[tex]K=A\times e^{\frac{-Ea}{RT}}[/tex]

or,

[tex]\log (\frac{K_2}{K_1})=\frac{Ea}{2.303\times R}[\frac{1}{T_1}-\frac{1}{T_2}][/tex]

where,

[tex]K_1[/tex] = rate constant at 225 K = [tex]0.391 s^{-1}[/tex]

[tex]K_2[/tex] = rate constant at 525 K = [tex]0.700 s^{-1}[/tex]

[tex]Ea[/tex] = activation energy for the reaction = ?

R = gas constant = 8.314 J/mole.K

[tex]T_1=225 K, T_2=525 K[/tex]

Now put all the given values in this formula, we get

[tex]\log (\frac{0.700 s^{-1}}{0.391 s^{-1}})=\frac{Ea}{2.303\times 8.314J/mole.K}[\frac{1}{225 K}-\frac{1}{525 K}][/tex]

[tex]Ea=1,906.82 J/mole=1.90682 KJ/mol[/tex]

Therefore, the activation energy for the reaction is, 1.90682  KJ/mol.

Answer: The molality of the solution is 0.953 m

Explanation:

Molarity of a solution is defined as the number of moles of solute dissolved per Liter of the solution

[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]

where,

n= moles of solute

[tex]V_s[/tex] = volume of solution in ml

Given : 0.907 moles of lead(ii)nitrate is dissolved in 1000 ml of the solution.

density of solution= 1.252 g/ml

Thus mass of solution = [tex]Density\times volume=1.252\times 1000 ml=1252g[/tex]

mass of solute =[tex]moles\times {\text {Molar mass}}=0.907mol\times 331g/mol=300g[/tex]

mass of solvent =mass of solution - mass of solute = (1252-300)g= 952 g

Molality of a solution is defined as the number of moles of solute dissolved per kg of the solvent.

[tex]Molality=\frac{n\times 1000}{W_s}[/tex]

where,

n = moles of solute  = 0.907 moles

[tex]W_s[/tex]= weight of solvent in g  = 952 g

[tex]Molality = \frac{0.907\times 1000}{952g}=0.953m[/tex]

Thus molality of the solution is 0.953 m

Final answer:

To find the molality of the 0.907 M lead(II) nitrate solution, we first calculate the mass of the solvent in kilograms and then divide the amount in moles of the solute by this mass. The final molality is approximately 0.953 mol/kg.

Explanation:

The question is asking to find the molality of a 0.907 M lead(II) nitrate solution with a density of 1.252 g/cm3. To calculate the molality, we need the number of moles of solute and the mass of the solvent in kilograms.

First, calculate the mass of 1 litre (1000 cm3) of solution using the density:

Mass of solution = Density imes Volume = 1.252 g/cm3 imes 1000 cm3 = 1252 g

Next, the mass of the solute in 1 litre of solution:

Mass of solute = Molarity imes Molar Mass imes Volume = 0.907 mol/L imes 331.2 g/mol imes 1 L = 300.2794 g

Now, find the mass of the solvent (water) by subtracting the mass of solute from the total mass of the solution:

Mass of solvent = Mass of solution - Mass of solute = 1252 g - 300.2794 g = 951.7206 g

Convert mass of solvent to kilograms:

Mass of solvent (kg) = 951.7206 g imes (1 kg / 1000 g) = 0.9517206 kg

Finally, calculate the molality (m):

Molality (m) = Moles of solute / Mass of solvent (kg) = 0.907 mol / 0.9517206 kg = 0.953 m

Therefore, the molality of the lead(II) nitrate solution is approximately 0.953 mol/kg.

Answer:

6.104x10^2=610.4

9.5x10^3=9500

Explanation:

To convert from scientific notation (6.104 x10^2, 9.5 x 10^-3) to standard notation, move the decimal point in accordance with the power of 10 (right for positive, left for negative). The converted numbers become 610.4 and 0.0095, respectively.

In scientific notation, the base number is expressed as a decimal between 1 and 10, and tens are represented by powers of 10. In standard notation, we write the number in usual decimal representation.

To convert 6.104 x10^2 to standard notation, move the decimal two places to the right (because the exponent is positive), giving you 610.4.

For 9.5 x 10^-3, move the decimal three places to the left (because the exponent is negative). So, it becomes 0.0095.

Remember that the number of significant figures must remain the same when converting to standard notation.

https://brainly.com/question/34289136

#SPJ2

Answer: 7.68×10^14 J

Explanation:

The magnitude of the charge q1=q2 = 1.6×10^-19 C

Proportionality constant K = 9×10^9 Nm²/C²

Da= 2×10^-10m

Db= 3 ×10^-15m

W= k q1q2 ( 1/Db -1/Da)

W= 9×10^9 (1.69×10^-19)²(1/3.0×10^-15 - 1/2×10^-10)

W= 7.68 ×10^-14J

Therefore the amount of work requires is 7.68 ×10^-14J

Answer:

The classification and illustrations are attached in the drawing.

Explanation:

It is possible to identify the pure substance observing the figure, since it is the only one that has 2 joined atoms (purple and blue) which forms a single compound.

On the other hand, the homogeneous mixture is identified by noting that its atoms are more united with respect to the heterogeneous mixture, highlighting that in homogenous mixtures the atoms, elements or substances are not visible to the naked eye and are in a single phase, instead in the heterogeneous mixture if they can be differentiated.

Heterogeneous mixture: Visible multiple chemicals with distinct parts.

Homogeneous mixture: Appears as one material, uniform with indistinguishable atoms and elements.

Pure material distinguished by figure with linked blue and purple atoms forming a single compound.

Heterogenous combination of visible compounds.  Homogenous mixture comprised of various materials that seem like one substance Each sample portion has the same makeup and properties. The graphic shows that the pure material is the only one with two connected atoms (blue and purple) that form a compound.

The homogeneous mixture is distinguished by its more unified atoms, emphasizing that while in homogeneous mixtures the atoms, elements, and substances are not visible to the eye and are in a single phase, in the heterogeneous mixture they can be distinguished.

Learn more about mixtures, here:

https://brainly.com/question/30391346

#SPJ3

Answer:

Here's what I get  

Explanation:

Does an ice cube feel cold to the hand?

The melting of ice is an endothermic process.

If you hold an ice cube, heat flows from your hand to the ice. When your hand loses heat, it feels cold.

In the same way, the endothermic dissolving of ammonium nitrate removes the heat from your hand, so the pack feels cold.

Answer: The molar mass of monoprotic acid is 135.9 g/mol

Explanation:

To calculate the number of moles for given molarity, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}\times 1000}{\text{Volume of solution (in mL)}}[/tex]

Molarity of NaOH solution = 0.1008 M

Volume of solution = 15.0 mL

Putting values in above equation, we get:

[tex]0.1008M=\frac{\text{Moles of NaOH}\times 1000}{15.0}\\\\\text{Moles of NaOH}=\frac{(0.1008\times 15.0)}{1000}=0.00151mol[/tex]

As, the acid is monoprotic, it contains 1 hydrogen ion

1 mole of [tex]OH^-[/tex] ion of NaOH neutralizes 1 mole of [tex]H^+[/tex] ion of monoprotic acid

So, 0.00151 moles of [tex]OH^-[/tex] ion of NaOH will neutralize [tex]\frac{1}{1}\times 0.00151=0.00151mol[/tex] of [tex]H^+[/tex] ion of monoprotic acid

Moles of monoprotic acid = 0.00151 moles

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Moles of monoprotic acid = 0.00151 mole

Given mass of monoprotic acid = 0.2053 g

Putting values in above equation, we get:

[tex]0.00151mol=\frac{0.2053g}{\text{Molar mass of monoprotic acid}}\\\\\text{Molar mass of monoprotic acid}=\frac{0.2053g}{0.00151mol}=135.9g/mol[/tex]

Hence, the molar mass of monoprotic acid is 135.9 g/mol

The molar mass of the monoprotic acid, which can be calculated using the titration method with sodium hydroxide, was found to be approximately 135.7 g/mol.

The subject of your query concerns on calculating the molar mass of an organic acid using the titration method with known information about sodium hydroxide. First, we need to look into the moles of sodium hydroxide (NaOH) used. Since we know the volume V=15.0 mL and concentration C=0.1008 M of NaOH used, moles (n) can be calculated using the equation n=CV, converting volume to liters, gives n = 0.1008 mol/L * 0.015 L = 0.001512 mol.

Because the sodium hydroxide and monoprotic acid react in a 1:1 ratio (as given by the neutralization equation NaOH + HA -> NaA + H2O), the moles of acid are also 0.001512.

The molar mass of the substance can then be determined by dividing the given mass of the sample by the number of moles. The mass of the organic acid is 0.2053g, so the molar mass (M) is M = mass / n = 0.2053g / 0.001512 mol = 135.7 g/mol.

This means that the molar mass of the monoprotic organic acid is approximately 135.7 g/mol.

https://brainly.com/question/20691135

#SPJ3

Answer:

V₁ = 3.0 mL

V(H₂O) = 7 mL

Explanation:

Given data

In order to determine the volume of the stock solution, we will use the dilution rule.

C₁ × V₁ = C₂ × V₂

100 mM × V₁ = 30 mM × 10 mL

V₁ = 3.0 mL

The volume of deionized water required is:

V(H₂O) = 10 mL - 3.0 mL = 7 mL

The volume of the stock solution required is 3 mL.

The stock solution is defined as the solution from which other solutions are prepared. We have the following information;

Using the formula;

M1V1 = M2V2

V1 = M2V2/M1

V1 = 30mM × 10 mL/100 mL

V1 = 3 mL

The volume of the stock solution required is 3 mL.

Learn more about dilution formula: https://brainly.com/question/7208939

The question is incomplete, here is the complete question:

Calculate the volume in liters of a [tex]8.75\times 10^{-5}M[/tex] silver (II) oxide solution that contains 200.g of silver (II) oxide . Round your answer to 3 significant digits.

Answer: The volume of solution is [tex]1.84\times 10^4L[/tex]

Explanation:

To calculate the volume of solution, we use the equation used to calculate the molarity of solution:

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Volume of solution (in L)}}[/tex]

We are given:

Molarity of solution = [tex]8.75\times 10^{-5}M[/tex]

Given mass of silver (II) oxide = 200. g

Molar mass of silver (II) oxide = 124 g/mol

Putting values in above equation, we get:

[tex]8.75\times 10^{-5}M=\frac{200}{124\times \text{Volume of solution}}\\\\\text{Volume of solution}=\frac{200}{124\times 8.75\times 10^{-5}}=1.84\times 10^4L[/tex]

Hence, the volume of solution is [tex]1.84\times 10^4L[/tex]

To calculate the volume in liters of a silver(II) oxide solution, you need to know the amount of the solution in milligrams and the density of the solution. Use the formula Volume (in liters) = x mg / (density in mg/L) and round the final answer to the appropriate number of significant digits.

To calculate the volume in liters of a silver(II) oxide solution, we need to know the amount of the solution in milligrams. Let's say the solution contains x mg of silver(II) oxide.

To convert mg to liters, we need to know the density of the solution. Once we have the density, we can use the formula:

Volume (in liters) = x mg / (density in mg/L)

Round the final answer to the appropriate number of significant digits.

https://brainly.com/question/20458032

#SPJ3