Suppose the leftmost digits of two numbers are 8 and 3 can u tell which number is greater? Explain

The density of the brick, calculated by dividing its mass of 100g by its volume of 25cm3, is 4 g/cm³.

The density of a substance can be calculated using the formula density = mass/volume. In this case, the brick has a mass of 100g and a volume of 25cm3. Therefore, its density would be 100g / 25cm3 = 4 g/cm³. This means that the density of the brick is 4 grams per cubic centimeter.

https://brainly.com/question/29775886

#SPJ12

Answer:

10:4 On dividing both the number by 2 and 15 : 6

On dividing both the number by 3

Step-by-step explanation:

Given  : ratios 10:4 and 15:6 .

To find : you show that the ratios 10:4 abd 15:6 are equivalent.

Solution : We have given 10:4 and 15:6 .

For 10 : 4

On dividing both the number by 2

5 : 2

For 15 : 6

On dividing both the number by 3

5 : 2.

So, we can  see both are equal in ratio 5 : 2 .

Therefore, 10:4 On dividing both the number by 2 and 15 : 6

On dividing both the number by 3

Final answer:

By applying the equations of motion for an object in free fall, it's determined that the stone was dropped from 404 feet above the ground, considering its positions at two separate times and using the acceleration due to gravity.

Explanation:

To find the original height from which the stone was dropped, we can use the equations of motion under constant acceleration due to gravity. Since we are dealing with a vertical motion and we are given the stone's positions at two different times, the most appropriate equation to use is:

h = h0 + v0t - ½gt²

Where:

We know that the stone is 250 feet above the ground at a certain instant and 10 feet above the ground 3 seconds later. Thus, we can use these values to solve for h0 in two steps. Firstly, convert the given heights to the same unit of measurement if necessary (in this case, they are already in feet). Then, substitute the given values into the equation:

At t = 3 seconds, h = 10 feet:

10 = h0 - ½(32)(3)²

Solving this equation gives us:

h0 = 10 + ½(32)(3)² = 10 + 144 = 154 feet

However, this calculation only accounts for the latter part of the fall. To find the total height from which it was dropped, we need to consider the height above the 250 feet mark.

Since we initially observed the stone at 250 feet and then at 10 feet above the ground, it implies the stone was dropped from 250 feet + 154 feet = 404 feet above the ground.

To find the number when 5/3% of it is 4.75, you can set up the equation (5/3%) x N = 4.75 and solve for N.

To find the number when 5/3% of it is 4.75, we can set up the equation:

(5/3%) x N = 4.75

To solve for N, we need to convert the percentage to a decimal:

5/3% = 5/3 x 1/100 = 5/300 = 1/60

Now we can rewrite the equation:

(1/60) x N = 4.75

To isolate N, we can multiply both sides of the equation by 60:

N = 4.75 x 60 = 285

Therefore, the number is 285.

Jim would be away from home for approximately 23 days.

To find out how many days Jim would be away from home, we need to multiply the number of days he spends away from home in a month by the number of months he does this for:

3 1/2 days x 6 1/2 months = (7/2) x (13/2) = 91/4 = 22.75 days

Since we can't have a fraction of a day, we round up the decimal to the nearest whole number. So, Jim would be away from home for approximately 23 days.

Answer:

We know that:

[tex]C_{(N)}=15000+8000N[/tex]

So first we need to substitute the next equation in the C(N) equation

[tex]N_{(t)} = 100t-5t^{2}[/tex]

And therefore we have:

[tex]C_{(t)}=15,000 + 8000*(100t-5t^{2})\\C_{(t)}=15,000 + 800000t-40000t^{2}[/tex]

Finally we replace at t = 5 in the equation above and we have:

[tex]C_{(5)}=15,000 + 800000*5-40000*5^{2}\\C_{(5)}= 3015000[/tex]

The interpretation is that after 5 hours of operation, we have wasted 3015000 dollars producing cars.  

To calculate the cost of production as a function of time, substitute the production function N(t) into the cost formula C(N). After simplifying, the cost function is C(t) = 15,000 + 800,000t - 40,000t². At 5 hours, the cost is 3,015,000 dollars.

To find the cost C as a function of the time t of operation of the factory, we first use the formula for the number of cars produced N(t) = 100t - 5t². Then we substitute the expression for N(t) into the cost function C(N) = 15,000 + 8000N.

Substituting N(t) into C(N), we get:

This is the cost C as a function of time t.

When t = 5 hours, the function becomes:

This result means that the cost of production after 5 hours of operation is 3,015,000 dollars.

To earn a total of $400 per week, considering you already earn $262.50 working 30 hours a week at a gas station, you need to make up the rest ($137.50) working as a landscaper. This equates to approximately 12.5 hours of work a week at an hourly rate of $11.

The nature of the question is mathematical, specifically relating to linear equations. Initially, we know you're earning $8.75 per hour from your job at the gas station, working 30 hours a week, which gives you a total of $8.75 * 30 = $262.50 per week. Your goal is to earn $400 in total per week. Therefore, your earnings from the landscaping job need to make up the difference, which is $400 - $262.50 = $137.50.

Next, to find out how many hours you need to work as a landscaper, we divide that by the landscaper's hourly wage of $11, so $137.50 / $11 = 12.5 hours approximately. Hence to meet your target of $400 per week, you need to work about 12.5 hours as a landscaper, in addition to your 30 hours at the gas station each week.

https://brainly.com/question/34619907

#SPJ2

Answer:

The equation of line is y = 2x.

Step-by-step explanation:

Consider the provided information.

A coordinate grid is shown. The x axis values are from negative 5 to positive 5 in increments of 1 for each grid line, and the y axis values are from negative 10 to positive 10 in increments of 2 for each grid line.

The slope intercept form of an equation of line is: y = mx + c

Where m is the slope and c is the y intercept.

[tex]Slope = m = \frac{Rise}{Run}[/tex]

Increments or decrements in x axis value represent the Run. Increments or decrements in y axis value represent the Rise.

It is given that "y axis values are from negative 10 to positive 10 in increments of 2 for each grid line."

Thus the Rise is 2 unit.

The x axis values are from negative 5 to positive 5 in increments of 1 for each grid line,

Thus the Run is 1 unit.

Hence the slope is: [tex] Slope=m=\frac{Rise}{Run}=2[/tex]

It is given that line passing through (0,0) it means the y intercept is 0.

Now substitute the value of m and y intercept in slope intercept form..

y = 2x + 0

y = 2x

Hence, the equation of line is y = 2x.

The number of cups of raisins needed to make 1/2 of the recipe is equal to [tex]1\frac{1}{3}[/tex] cups of raisins.

What is the unitary method ?

The unitary method is a method in which you find the value of one unit and then the value of required no. of units.

It is given that a full recipe asks for [tex]2\frac{2}{3}[/tex] cups of raisins.

We have to find the number of cups of raisins needed to make 1/2 of the recipe.

1 full recipe needs =  [tex]2\frac{2}{3}[/tex] cups of raisins.

So , the number of cups of raisins needed to make 1/2 of the recipe can be calculated by :

1/2 of recipe needs =  [tex]2\frac{2}{3}[/tex]  × [tex]\frac{1}{2}[/tex] cups of raisins

or

1/2 of the recipe needs :

= [tex]\frac{8}{3}[/tex]  × [tex]\frac{1}{2}[/tex] cups of raisins

= [tex]\frac{4}{3}[/tex]

or [tex]1\frac{1}{3}[/tex] cups of raisins

Therefore , the number of cups of raisins needed to make 1/2 of the recipe is equal to [tex]1\frac{1}{3}[/tex] cups of raisins.

Learn more about unitary method here :

https://brainly.com/question/18575566

#SPJ2

Answer: 6/12 in other words 1/2

hope thats correct

r 27 is the answer....