what elements make up molecules make up molecules of sugar
Answer:
Carbon, hydrogen and oxygen.
Explanation:
Hello,
Chemically speaking, sucrose is the molecule composing the sugar and it is shown on the attached document wherein it is seen that it is made up of carbon, hydrogen and oxygen. In addition, it is categorized as disaccharide, a molecule consisting of two monosaccharides: glucose and fructose. It is produced naturally in plants, from which table sugar is refined. It has the shown below molecular formula:
[tex]C_{12}H_{22}O_{11}[/tex]
Best regards.
A cube of aluminum is 20 cm on edge. aluminum has a density of 2.7 g/cm3 and a specific heat of 0.217 cal/g0c. what is the heat in calories needed to raise the temperature of the cube from 200 to 3000c?
A common unit of energy is the calorie. A calorie is defined as the amount of heat that is needed to raise the temperature of one gram of water one degree centigrade. Modern convention uses a unit of energy called a joule. A calorie is equal to 4.184 joules. A joule is approximately the energy needed to lift 2000 grams a distance of 10 centimeters.
Heat is transferred by either direct transfer from one object touching another or by the emission of radiation in the form of infrared radiation. Two results can occur as a result of this transfer of thermal energy. A substance can undergo either a change in temperature or a change in physical state.
When a substance exchanges heat with its surroundings without changing its physical state, the substance will undergo a change in temperature. This change in temperature depends on a property called specific heat capacity.
Specific heat capacity is the "heat needed to produce a given temperature change (in Celsius or Kelvin) per gram of substance" and is expressed in the units J/gK. Specific heat capacity depends on both the type of substance and the mass of the substance.The "D" means "change in" and "q" represents the quantity of heat.
____ 46. the number of electrons present in the s orbitals in the outermost electron shell of the alkaline earth (group iia) metals is ____.
Why did the better part of century pass between Thompson’s work and Dalton’s work
Chamber 1 and Chamber 2 have equal volumes of 1.0L and are assumed to be rigid containers. The chambers are connected by a valve that is initially closed. Chamber 1 contains 2.00 moles of helium and Chamber 2 contains 1.00 mol of helium. Both chambers are at a temperature of 27°C.Part 3.When the valve is opened, what happens to the pressure in Chamber 1? Choose the best answer.
Tyrosine contains 11 hydrogen atoms, 9 carbon atoms, 3 oxygen atoms, and 1 nitrogen atom. what is the chemical formula for tyrosine?
Final answer:
Tyrosine's chemical formula is C₉H₁₁NO₃. It is an amino acid essential for protein synthesis and acts as a precursor for important molecules in the body.
Explanation:
The chemical formula for tyrosine is C₉H₁₁NO₃.
Tyrosine is an amino acid that contains 9 carbon atoms, 11 hydrogen atoms, 1 nitrogen atom, and 3 oxygen atoms. The molecular formula for tyrosine is derived based on the composition of these elements within the molecule.
Additionally, tyrosine is a non-essential amino acid that plays a role in protein synthesis, and it is also a precursor for various important molecules in the body like neurotransmitters and hormones.
Predict the mass of iron (III) sulfide produced when 3.0 g of iron filings react completely with 2.5 g of yellow sulfur solid, S8(s).
The complete balanced chemical reaction to this would be:
2 Fe + 3/8 S8 --> Fe2S3
First convert mass into number of moles.
moles Fe = 3 g / (55.845 g/mol) = 0.05372 mol Fe
moles S8 = 2.5 g / (256.52 g/mol) = 0.0097458 mol S8
Then we find the limiting reactant. The limiting reactant is the one which has lower (moles/coefficient) ratio.
Fe = 0.05372 / 2 = 0.02686
S8 = 0.0097458 / (3/8) = 0.02599
So since S8 has lower ratio, therefore it is the limiting reactant so we base our calculation from it. From the reaction, we get 1 mole of Fe2S3 for every 3/8 mol of S8, therefore:
moles Fe2S3 = 0.0097458 mol S8 * (1 mole Fe2S3 / 3/8 mol S8)
moles Fe2S3 = 0.02599 mol
The molar mass of Fe2S3 is 207.9 g/mol, so the mass is:
mass Fe2S3 = 0.02599 mol * 207.9 g/mol
mass Fe2S3 = 5.4 grams
The answer is D
Just had this question
Using MO theory, predict which of the following species has the longest bond and which the strongest bond, respectively: O2, O2−, O22−
MO theory i.e. molecular orbital theory is used to determine the structure of molecule and explains the bonding present in the molecule by using linear combination of atomic orbitals. The bond length in the given species of oxygen can be identify on the basis of the positions of the electrons in this theory.
The mathematical expression of bond order is given by:
[tex]Bond order = \frac{1}{2}\times (electrons in bonding Molecular orbitals - electrons in anti-bonding Molecular orbitals)[/tex]
The molecular diagrams are shown in the image.
Now, calculate bond orders:
For, [tex]O_{2}^{2-}[/tex]: It consist of 10 bonding electrons and 8 anti-bonding electrons.
Bond order = [tex] \frac{1}{2}\times (10 - 8)[/tex]
= 1
For, [tex]O_{2}[/tex]: It consist of 10 bonding electrons and 6 anti-bonding electrons.
Bond order = [tex] \frac{1}{2}\times (10 - 6)[/tex]
= 2
For, [tex]O_{2}^{-}[/tex]: It consist of 10 bonding electrons and 7 anti-bonding electrons.
Bond order = [tex] \frac{1}{2}\times (10 - 7)[/tex]
= 1.5
Since, bond order is inversely proportional to bond length implies higher the bond order short will be the bond length.
Thus, order of bond length: [tex]O_{2}< O_{2}^{-}< O_{2}^{2-}[/tex]
Longest bond: [tex]O_{2}^{2-}[/tex]
Using Molecular Orbital theory, O22- has the longest bond, because it has the fewest bonding electrons. O2 has the strongest bond due to its highest bond order.
Explanation:In molecular orbital (MO) theory, the bond length is dependent on the number of bonding electrons. The more bonding electrons, the shorter the bond. Bond strength, conversely, is related to bond order - the higher the bond order, the stronger the bond. O2 has a bond order of 2, O2- has a bond order of 1.5, and O22- has a bond order of 1. Therefore:
The species with the longest bond is O22- as it has the least bonding electrons, hence longer distance between nuclei due to less attraction.The species with the strongest bond is O2, which has the highest bond order, indicating higher bond energy.Learn more about Molecular Orbital Theory here:https://brainly.com/question/31844972
#SPJ6
Vinegar is a solution of acetic acid (melting point 16.5 °c) in water. at room temperature (25 °c), vinegar is an example of a ________ solution.
At room temperature, vinegar is an example of a liquid solution, as acetic acid is in a liquid state when dissolved in water. The empirical and molecular formulas of acetic acid can be found using its percentage composition and molar mass.
Explanation:Vinegar is a solution of acetic acid (melting point 16.5 °C) in water. At room temperature (25 °C), vinegar is an example of a liquid solution. This is because at room temperature, acetic acid is above its melting point and thus exists in the liquid state, dissolving in water to form a solution.
To determine the empirical formula of acetic acid with the given percentage composition of 39.9% carbon, 6.7% hydrogen, and 53.4% oxygen, one would start by assuming 100 grams of substance to convert percentages to grams directly. Then, for each element, the number of moles is found by dividing by the atomic mass (C:12.01 g/mol, H:1.008 g/mol, O:16.00 g/mol), followed by dividing by the smallest number of moles to get the ratio.
How many cations are there in 20.0 g of sodium phosphate?
A solution containing a mixture of metal cations was treated with dilute hcl and a precipitate formed. the solution was filtered and h2s was bubbled through the acidic solution. a precipitate again formed and was filtered off. then, the ph was raised to about 8 and h2s was again bubbled through the solution. this time, no precipitate formed. finally, the solution was treated with a sodium carbonate solution, which resulted in formation of a precipitate. which metal ions were definitely present, which were definitely absent, and which may or may not have been present in the original mixture?
What is the ionic charge for the calcium ion in CaCO3?
For a solution of acetic acid in water list the major species in decreasing order of concentration
In a solution of acetic acid in water, the major species present in decreasing order of concentration are acetic acid, water, the acetate ion, and the hydronium ion. This is due to the partial ionization of acetic acid in water and the reaction's equilibrium state.
Explanation:When acetic acid (CH3CO2H) is dissolved in water, it partially dissociates into ions. The major species present in the solution would be acetic acid (CH3CO2H), water molecules (H2O), the acetate ion (CH3CO2), and the hydronium ion (H3O+), listed in this order due to the partial ionization of acetic acid and the existence of the reaction in equilibrium.
The equation for this process can be shown as: CH3CO2H(aq) + H2O(l) ⇌ CH3CO2¯(aq) + H3O+(aq)
Because acetic acid is a weak acid, it only partially ionizes in water, which means that the majority of the molecules remain in the undissociated form (acetic acid), followed by water (as solvent), and significantly lower concentrations of the acetate ions and hydronium ions counted per unit volume of the solution.
Learn more about Acetic Acid in Water here:https://brainly.com/question/31751070
#SPJ3
What will happen when 200ml of 3.0m naoh and 100ml of 3.0 m hcl are combined?
How many milliliters of 4.00 m hcl(aq) are required to react with 2.75 g of zn(s)?
Bromine, a liquid at room temperature, has a boiling point of 58°C and a melting point of –7.2°C. Bromine can be classified as a
Explanation:
A pure substance is defined as the substance that contains same type of atoms or atoms of one type of molecule.
A pure substance will always have a fixed melting and boiling point.
For example, at room temperature bromine is a liquid and its boiling point of [tex]58^{o}C[/tex] and a melting point of [tex]-7.2^{o}C[/tex].
Hence, bromine is a pure substance.
Whereas when two or more different substances are mixed together irrespective of their ratio by mass then they are known as mixtures. And, mixtures always show a range of temperature for their melting and boiling point.
Hence, bromine is not a mixture.
how many milliliters of a .89 M solution of HCl is needed to have 1.3 mole of HCl?
if 4.35 KJ of
heat is added to 15.5 g of water at 5.00 Celsius what will be the result in state and temp of the water
30) In adults, the function of the yellow marrow is to:
A) store adipose tissue
B) form blood cells
C) store calcium and phosphorus
D) cause lengthwise growth in long bones
E) decrease friction at joint surfaces
31) The presence of an epiphyseal plate indicates that:
A) bone is dead
B) bone length is no longer increasing
C) bone diameter is increasing
D) bone diameter is decreasing
E) bone length is increasing
32) The bone cells that respond to parathyroid hormone (PTH) to destroy bone matrix and release calcium into the blood are called:
A) osteocytes
B) chondrocytes
C) erythrocytes
D) osteoclasts
E) osteoblasts
33) A round or oval opening through a bone is a:
A) facet
B) fossa
C) foramen
D) fissure
E) trochanter
34) Which of the following bones is NOT considered part of the appendicular skeleton:
A) femur
B) sternum
C) radius
D) metatarsals
E) scapula
35) What kind of tissue is the forerunner of long bones in the embryo:
A) elastic connective tissue
B) dense fibrous connective tissue
C) fibrocartilage
D) hyaline cartilage
E) loose fibrous connective tissue
36) Which of the following is an example of a bone that forms from fibrous membranes:
A) the parietal bone
B) the radius
C) the humerus
D) the femur
E) the tibia
37) There are four stages in the healing of a bone fracture. Which of the following best illustrates the sequence of these stages:
1. bony callus formation 3. fibrocartilage callus formation
2. bone remodeling 4. hematoma formation
A) 4, 3, 2, 1
B) 4, 3, 1, 2
C) 1, 2, 3, 4
D) 1, 3, 4, 2
E) 1, 3, 2, 4
38) A compound fracture can be described as when:
A) the bone is crushed
B) the broken bone ends are forced into each other
C) the broken bone is exposed to the outside
D) the bone is broken into many fragments
E) adjacent bones fracture simultaneously
39) The axial skeleton contains:
1. skull
2. arms and legs
3. ribs and sternum
4. vertebrae
5. pelvic girdles
A) 1, 3, 4, 5
B) 1, 3, 4
C) 2, 5
D) 2, 3, 4, 5
E) 1, 2, 3, 5
40) The fibrous connections between the bones of a fetal skull are:
A) alveolar margins
B) sinuses
C) palate
D) crista galli
E) fontanels
41) Which of these bones is associated with the hand:
A) talus
B) calcaneus
C) metatarsals
D) tarsals
E) metacarpals
42) The hyoid bone is unique because:
A) it is the only bone of the body that does not directly articulate with any other bone
B) it has an unusual shape
C) it is covered with mucosa
D) it has no specific function
E) it largely consists of cartilage
43) How many true ribs do humans have:
A) three
B) five
C) seven
D) twelve
E) fifteen
44) The atlas is the:
A) last lumbar vertebra
B) first thoracic vertebra
C) part of the sacrum
D) second cervical vertebra
E) first cervical vertebra
45) Which is the correct order of ribs, from superior to inferior:
A) floating ribs, true ribs, false ribs
B) floating ribs, false ribs, true ribs
C) true ribs, false ribs, floating ribs
D) true ribs, floating ribs, false ribs
E) false ribs, floating ribs, true ribs
46) The sternum is the result of fusion of three bones called the:
A) ischium, ilium, coccyx
B) pubis, ischium, ilium
C) manubrium, body, xiphoid process
D) jugular notch, sternal angle, xiphisternal joint
E) true ribs, manubrium, xiphoid process
47) Which two bones constitute the forearm:
A) radius and humerus
B) humerus and scapula
C) fibula and tibia
D) ulna and radius
E) femur and fibula
48) The tailbone is the:
A) ischium
B) sacrum
C) pubis
D) coccyx
E) patella
49) Which of the following is correct of the female pelvis when comparing it with the male pelvis:
A) the angle of the female pubic arch is smaller
The answer provides responses to a series of questions about bone anatomy and physiology. Key concepts covered include the function of yellow marrow, the meaning of an epiphyseal plate, the bone cells that respond to parathyroid hormone, and specific bone structures such as foramen, sternum, hyaline cartilage, atlas, and coccyx.
Explanation:The respective answers to the given questions are as follows:
In adults, yellow marrow's function is to store adipose tissue (A).Presence of an epiphyseal plate indicates that bone length is increasing (E).Osteoclasts (D) responds to parathyroid hormone to destroy bone matrix and release calcium.A round or oval opening through a bone is called a foramen (C).Sternum (B) is not part of the appendicular skeleton.Hyaline cartilage (D) is the tissue precursor of long bones in an embryo.The parietal bone (A) forms from fibrous membranes.The stages in the healing of a bone fracture are 4, 3, 1, 2 (B).A compound fracture is when the broken bone is exposed to the outside (C).The axial skeleton contains the skull, ribs, sternum, and vertebrae (B).The fibrous connections between the bones of a fetal skull are fontanels (E).Metacarpals (E) is associated with the hand.The hyoid bone is unique because it doesn't directly articulate with any other bone (A).Humans have seven true ribs (C).The atlas is the first cervical vertebra (E).The order of ribs from superior to inferior is true ribs, false ribs, and floating ribs (C). The sternum results from the fusion of the manubrium, body, and xiphoid process (C). Radius and ulna (D) constitute the forearm.The tailbone is also known as the coccyx (D).Learn more about Bone Anatomy and Physiology here:
https://brainly.com/question/1148464
#SPJ11
PLEASE HELP ASAP!!!!!!!!!!!!! I dont understand this stuff at all.........
We know that standard pressure is one atmosphere, or 760 millimeters of mercury. This pressure results from the weight of gas molecules in the atmosphere. As a diver enters the water, he is subject to both water pressure and air pressure. Because water is much denser than air, the pressure increases rapidly as the diver descends. At the depth of 34 feet in fresh water, the diver is experiencing 2 atmospheres of pressure (one from air pressure and one from the 34 feet of water). For every additional 34 feet the diver descends he will be under an additional atmosphere of pressure. Since water pressure is proportional to depth, how many atmospheres of pressure would a diver experience at 102 feet? Why wouldn't this pressure squash the diver? Answering this second question may be easier if you think of the reason a person on land is not squashed by one atmosphere of pressure. Explain your answer in detail.
When a diver enters the water, they experience both water pressure and air pressure. As the diver descends, the pressure exerted by the water increases because water is denser than air. The pressure is measured in atmospheres, with one atmosphere being equal to 760 millimeters of mercury or the normal atmospheric pressure at sea level.
At a depth of 34 feet in fresh water, the diver experiences 2 atmospheres of pressure. This includes one atmosphere from the air pressure above the water's surface and an additional atmosphere from the 34 feet of water. For every additional 34 feet the diver descends, they will encounter an extra atmosphere of pressure.
To calculate the pressure at 102 feet, we can divide the depth by 34 (since each 34 feet corresponds to one additional atmosphere of pressure).
102 feet / 34 feet = 3 atmospheres of pressure
Therefore, at a depth of 102 feet, a diver would experience 3 atmospheres of pressure.
Now, you might wonder why this pressure doesn't squash the diver. The reason is similar to why a person on land is not squashed by one atmosphere of pressure. Our bodies are made up of fluids and tissues that can withstand and equalize the pressure. When a person is at sea level, the air pressure around them is balanced by the air pressure within their body. Similarly, when a diver descends into the water, the increased water pressure is balanced by the internal pressure within their body. This balance prevents the diver from being squashed by the external pressure. However, it is important for divers to follow safety guidelines and gradually ascend to allow their bodies to adjust to changes in pressure and avoid decompression sickness.
How many water molecules are in a block of ice containing 1.75 mol of water (H2O)?
What is the momentum of a 66-kilogram ice skater gliding across the ice at a speed of 7 m/s
A reagent bottle on the shelf labeled 0.5m nacl was used in place of the 0.5 m cacl2. assuming c2o4^2- to be in excess, what would be observed as a result of using this wrong reagent in this test? explain
Why is the third equivalence point not observed in the titration curve for phosphoric acid?
Final answer:
The third equivalence point for phosphoric acid is not observed due to the weak acidity of HPO, resulting in an unclear definition of the pH at this point.
Explanation:
The third equivalence point for phosphoric acid (H3PO4) is not observed in the titration curve because HPO is a very weak acid, resulting in the third deprotonation step having a pH that is not well-defined.
The first two equivalence points are seen at approximately pH 4.6 and pH 9.8, corresponding to the deprotonation of H3PO4 and H2PO4-, respectively. Due to the weak acidity of HPO, the third equivalence point at pH ≈ 13 is not clearly distinguishable
Where are elements that form molecules of two of the same atoms commonly found on the periodic table?
Give the number of significant figures in this number: 0.070
Answer:
Significant figures in number '0.070' is 2.
Explanation:
Significant figures : The figures are the numerals which express the value of magnitude of a quantity to a specific degree of accuracy also called significant digits.
0.070 = [tex] 7.0\times 10^{-2][/tex]
Significant figures in number '0.070' is 2.
All zero’s preceding the first integers are never significant. For example: 0.00748 has three significant figures. All zero’s after the decimal point are always significant. For example: 4.800, 85.00 and 250.0 all have four significant figures.In a calorimeter, the equilibrium temperature of copper in water is determined. if the water is replaced with a liquid that has a lower specific heat, what will happen to the equilibrium temperature
Final answer:
Replacing water with a liquid with a lower specific heat in a calorimeter experiment will result in a higher final equilibrium temperature for the copper and liquid compared to if water were used.
Explanation:
When conducting an experiment in a calorimeter where a hot piece of copper is placed in a liquid to reach thermal equilibrium, the specific heat capacity of the liquid will affect the final equilibrium temperature of both substances. If the copper is submerged in a liquid with a lower specific heat than water, the liquid will reach a higher temperature than it would if water were used. This is because a liquid with a lower specific heat capacity requires less heat transfer to increase its temperature by 1°C. Accordingly, the copper would not cool down as much as it would in water because less heat is needed to warm up the liquid. Hence, the final equilibrium temperature when using a liquid with a lower specific heat will be higher than if water were used.
what is the mass number of an ion that has 83 protons, 80 elections, and 126 neutrons
Considering the definition of mass number, the mass number of the ion is 209.
All atoms are made up of subatomic particles: protons and neutrons, which are part of their nucleus, and electrons, which revolve around them.
Mass Number is the integer equal to the sum of protons and neutrons present in the nucleus of an atom. This is:
Mass number = (number of protons) + (number of neutrons)
It is represented by the letter A.
In this case:
number of protons= 83 number of neutrons= 126So:
Mass number = 83 + 126
Solving:
Mass number= 209
In summary, the mass number of the ion is 209.
Learn more:
brainly.com/question/11837355?referrer=searchResults brainly.com/question/1758023Calculate the number of grams of hcl that can react with 0.470 g of al(oh)3.
To calculate the number of grams of HCl that can react with Al(OH)3, use the balanced chemical equation and stoichiometry. 0.470 g of Al(OH)3 reacts with approximately 1.32 g of HCl.
Explanation:To calculate the number of grams of HCl that can react with 0.470 g of Al(OH)3, we need to use the balanced chemical equation and stoichiometry. The balanced equation for the reaction between HCl and Al(OH)3 is:
6HCl + Al(OH)3 → 3H2O + AlCl3
From the equation, we can see that 6 moles of HCl react with 1 mole of Al(OH)3. To find the number of moles of HCl, we can use the molar mass of Al(OH)3 (78.0 g/mol) to convert the mass of Al(OH)3 to moles. Then, we can use the stoichiometry to calculate the number of moles of HCl. Finally, we can use the molar mass of HCl (36.46 g/mol) to convert moles of HCl to grams. Let's do the calculations:
Calculate moles of Al(OH)3: 0.470 g / 78.0 g/mol = 0.00603 molCalculate moles of HCl using stoichiometry: 0.00603 mol Al(OH)3 × (6 mol HCl / 1 mol Al(OH)3) = 0.0362 mol HClCalculate grams of HCl: 0.0362 mol HCl × 36.46 g/mol = 1.32 g HClTherefore, the number of grams of HCl that can react with 0.470 g of Al(OH)3 is approximately 1.32 g of HCl.
What is the density of an unknown substance that has a mass of 50 g and its measurements are 9.0 cm high, 10cm long, and 2 cm wide?