The combustion of ammonia produces NO and water. If the chemical reaction for this process is properly balanced using the smallest possible integers, what is the sum of the coefficients for the products?

Final answer:

To balance the equation C₂H₆ + O₂ → CO₂ + H₂O, we end up with a balanced chemical equation of 2C₂H₆ + 7O₂ → 4CO₂ + 6H₂O, where the coefficient of O₂ is 7.

Explanation:

The question concerns the balancing of a chemical equation involving ethane (C₂H₆) and oxygen (O₂) to produce carbon dioxide (CO₂) and water (H₂O). Balancing chemical equations requires ensuring that the number of atoms of each element is the same on both sides of the equation. Starting with the unbalanced equation C₂H₆ + O₂ → CO₂ + H₂O, we first balance the carbons (C) and hydrogens (H) by adjusting the coefficients of the products. For example, the equation can be balanced by placing a coefficient of 3 before H₂O and 2 before CO₂, resulting in C₂H₆ + O₂ → 2CO₂ + 3H₂O. However, this leads to seven oxygen atoms on the product side. We need an even number of oxygen atoms to balance them with the O₂ reactant, so we use a fractional coefficient of 3.5 (which is 7/2) in front of O₂.

To remove the fractional coefficient, we can multiply all coefficients by 2, resulting in the balanced chemical equation: . Thus, the coefficient of O₂ when the equation is balanced is 7.

The noble gases undergo very few chemical reactions. They are stable and unreactive due to their full valence electron shells.

The noble gases d. undergo very few chemical reactions. The noble gases, such as helium, neon, and argon, are characterized by their high stability and low reactivity. They have full valence electron shells, which makes them unreactive and unlikely to form compounds with other elements. Because of their stable electron configurations, noble gases do not readily lose or gain electrons, meaning they do not undergo many chemical reactions.

https://brainly.com/question/36629312

#SPJ6

Noble gases are elements that are chemically very stable and undergo very few chemical reactions due to their complete outer electron shell. They do not easily give or accept electrons, thereby making them generally nonreactive. However, under extreme conditions, some noble gases like xenon can form compounds.

The noble gases are elements in group 18 of the periodic table including helium, neon, argon, krypton, xenon, and radon. They're named 'noble' due to their unique characteristics of being largely inert, or unreactive. Their outer electron shell is completely filled, which makes them high in ionization energy and resistant to forming compounds under normal conditions. This means that they do not readily give or accept electrons - hence they are chemically very stable, or in other words, they undergo very few chemical reactions.

However, there are a few exceptions to the rule. For example, under high pressure and temperature conditions, some noble gases like xenon can be forced to create compounds such as xenon hexafluoride (XeF6).

Despite their general chemical inactivity, noble gases have various practical applications. They are used in neon signs, as inert atmospheres in certain industrial processes, and as coolants due to their low boiling and melting points compared to other substances of similar atomic or molecular masses.

https://brainly.com/question/11764545

#SPJ3

Answer:

the answer is c

Explanation:

The number of protons within the nucleus of a given atom is equal to the atomic number of the corresponding element, which can be found on the periodic table. For example, the atomic number of helium is two. Therefore, the number of protons is also two.

Each element is unique and different from other elements because of the atomic number.

Atomic number:

It is the number of protons in an atom. The atomic number is unique for every element.

Atomic mass:

It is the sum of the protons and neutrons in an atom. The atoms with same atomic number are called isobaric.

Therefore, each element is unique and different from other elements because of the atomic number.

To know more about atomic number,

https://brainly.com/question/4206478

Answer:

0.09425

Explanation:

The reactant is in solid phase and therefore has zero partial pressure.

The products have the same mole ratio (1:1) and will have the same partial pressure = 1/2 × 0.614 atm = 0.307 atm

Kp =  (NH3)(H2S) = 0.09425

The equilibrium constant expression for the given reaction is K = [NH3][H2S]. Since NH4HS is a solid, it is not included in the equilibrium constant expression. If the concentration of H2S triples, the concentration of NH3 should decrease by a factor of 3 to maintain equilibrium.

The given reaction involving NH4HS(s)⇌NH3(g)+H2S(g) is an equilibrium reaction. At equilibrium, the total pressure of NH3 and H2S combined is 0.614 atm. In this equilibrium expression, NH4HS(s) does not appear since it is a solid. Therefore, the equilibrium constant, K, is given by the expression K = [NH3][H2S]. Since the concentrations of the products are inversely proportional, if the H2S concentration triples, the NH3 concentration must decrease by a factor of 3 to keep the system at equilibrium so that the product of the concentrations equals K.

Answer : The change in enthalpy of the coffee is negative.

Explanation :

Endothermic reaction : It is defined as the chemical reaction in which the energy is absorbed from the surrounding.

In the endothermic reaction, the energy of reactant are less than the energy of product.

Exothermic reaction : It is defined as the chemical reaction in which the energy is released into the surrounding.

In the exothermic reaction, the energy of reactant are more than the energy of product.

Enthalpy change : It is the difference between the energy of product and the reactant. It is represented as [tex]\Delta H[/tex].

As per question, if hot coffee sits on your desktop and loses 50 kJ of energy during cooling, the change in enthalpy of the coffee is negative.

Hence, change in enthalpy of the coffee is negative.

Answer:

Covalent bond

Explanation:

Functional groups can be defined as a group of atoms or ions responsible for the properties particular to a certain group of organic compounds. What we are saying in essence is that it is the functional groups that decides the behavior of the organic compound in question.

Covalent linkages are the mechanism through which these functional groups are linked to the carbon skeleton of the compound to which they belong. Covalent bonding is a type of chemical bonding which in there is sharing of electrons between atoms

Covalent bond

Learn more:

brainly.com/question/14237231

A barium fluoride solution with a concentration of 1.32 grams per liter, equivalent to its solubility, would be considered saturated. This means that no more barium fluoride can be dissolved in the water at the same temperature.

The solubility of barium fluoride in water is 1.32 grams per liter. Therefore, if a barium fluoride solution had a concentration of 1.32 grams per liter, it would be referred to as being saturated. A saturated solution is a solution in which no more solute can be dissolved in the solvent at a given temperature. In this case, the maximum amount of barium fluoride that can be dissolved in water at the given temperature has been reached.

Learn more about Solubility here:

https://brainly.com/question/31493083

#SPJ3

Answer:

i cant read sideways

Explanation:

Answer: Solution attached.

The equation are already balanced also.

Explanation:

Final answer:

To calculate the rate of delivery of aminophylline for a 40-lb child, convert the weight to kg and multiply by the recommended dose. Then, divide the dose by the concentration of the aminophylline solution to find the rate of delivery in mL/h.

Explanation:

To find the rate of delivery for a 40-lb child, we need to first convert the weight of the child to kilograms. Since 1 pound is equal to approximately 0.4536 kilograms, a 40-lb child would weigh 18.14 kg. The recommended maintenance dose of aminophylline for children is 1 mg/kg/h, so for a 40-lb child, the dose would be 18.14 mg/h.

To find the rate of delivery in milliliters per hour, we need to consider the concentration of the aminophylline solution. In this case, 10 mL of a 25-mg/mL solution of aminophylline is added to a 100 mL bottle of dextrose injection. This gives us a total volume of 110 mL of aminophylline solution. Since we want a rate of delivery in milliliters per hour, we divide the dose (18.14 mg/h) by the concentration (25 mg/mL) to get the volume per hour. This gives us a rate of delivery of approximately 0.74 mL/h.

Answer:b

Explanation:

Answer: B. Compressing 2 liters of water into a 1 liter volume.

Explanation: Liquids have little compressibility as compared to gases. Their molecules are quite near each other compared to gases which far apart. When liquids are compressed up to their capacity it will begin to resist. But gases have higher compressibility rate than liquids.

To find the heat of combustion for cyclopropane in kcal/gram, divide the heat of reaction (499.8 kcal/mol) by the molar mass of cyclopropane (42.08 g/mol).

The heat of combustion for cyclopropane in kcal/gram can be calculated using its molar mass and the given heat of reaction. The molar mass of cyclopropane, C3H6, is 42.08 g/mol. With a heat of reaction of 499.8 kcal/mol, we can calculate the heat of combustion per gram by dividing the heat of reaction by the molar mass:

Heat of combustion (kcal/g) = Heat of reaction (kcal/mol) / Molar mass (g/mol)

Thus,

Heat of combustion (kcal/g) = 499.8 kcal/mol / 42.08 g/mol

Once you perform the division, you'll have the heat of combustion for cyclopropane in kcal/gram.

https://brainly.com/question/38340398

#SPJ12

Answer:

1.49×10²² atoms of H are contained in the sample

Explanation:

TNT → C₇H₅N₃O₆

1 mol of this has 7 moles of C, 5 moles of H, 3 moles of N and 6 moles of O

Let's determine the mass of TNT.

Molar mass is = 227 g/mol

As 1 mol has (6.02×10²³) NA atoms, how many moles are 8.94×10²¹ atoms.

8.94×10²¹ atoms / NA = 0.0148 moles

So this would be the rule of three to determine the mass of TNT

3 moles of N are in 227 g of compound

0.0148 moles of N are contained in (0.0148 .227) / 3 = 1.12 g

Now we can work with the hydrogen.

227 grams of TNT contain 5 moles of H

1.12 grams of TNT would contain (1.12 .5) / 227 = 0.0247 moles

Finally let's convert this moles to atoms:

0.0247 mol . 6.02×10²³ atoms / 1 mol = 1.49×10²² atoms

The number of Hydrogen atoms in the TNT is 1.51×10²² atoms.

We'll begin by calculating the number of mole of nitrogen that contains 8.94×10²¹ atoms of nitrogen.

From Avogadro's hypothesis,

6.02×10²³ atoms = 1 mole of N

Therefore,

8.94×10²¹ atoms = 8.94×10²¹ / 6.02×10²³  

8.94×10²¹ atoms = 0.015 mole of N

Next, we shall determine the number of mole of TNT (C₇H₅N₃O₆) that contains 0.015 mole of N

3 moles of N are present in 1 mole of TNT (C₇H₅N₃O₆).

Therefore,

0.015 mole of N will be present in = 0.015 / 3 = 0.005 mole of TNT (C₇H₅N₃O₆).

Next, we shall determine the number of mole of H in 0.005 mole of TNT (C₇H₅N₃O₆).

1 mole of TNT (C₇H₅N₃O₆) contains 5 moles of H.

Therefore,

0.005 mole of TNT (C₇H₅N₃O₆) will contain = 0.005 × 5 = 0.025 mole of H

Finally, we shall determine the number of atoms in 0.025 mole of H.

From Avogadro's hypothesis,

1 mole of H = 6.02×10²³ atoms

Therefore,

0.025 mole of H = 0.025 × 6.02×10²³

0.025 mole of H = 1.51×10²² atoms.

Thus, the number of atoms of Hydrogen in the sample of the TNT is 1.51×10²² atoms.

Learn more about Avogadro's number:

https://brainly.com/question/21050442

The fraction of a helium-4 atom's mass contributed by its nucleus can be calculated using the relative masses of the nucleus and electrons.

When calculating the fraction of an atom's mass contributed by its nucleus, we consider the relative masses of the nucleus and the electrons. The mass of the nucleus is determined by subtracting the combined mass of the two electrons from the total mass of the helium-4 atom. So, the fraction of the atom's mass contributed by its nucleus is:

Nucleus fraction = (4 x mass of nucleon) / (4 x mass of nucleon + total mass of electrons)

Using the given values, the nucleus fraction of a helium-4 atom can be calculated.

https://brainly.com/question/36343751

#SPJ3

The fraction of the helium-4 atom's mass contributed by its nucleus is approximately 0.999927.

To find the fraction of the helium-4 atom's mass that is contributed by its nucleus, we need to subtract the mass of the electrons from the total mass of the atom and then divide by the total mass of the atom.

The mass of a helium-4 atom is given as [tex]\( m_{atom} = 6.64648 \times 10^{-24} \) g[/tex].

Each helium-4 atom has two electrons, and the mass of each electron is [tex]\( m_{electron} = 9.10939 \times 10^{-28} \) g[/tex].

First, we calculate the total mass of the two electrons:

[tex]\[ m_{electrons\_total} = 2 \times m_{electron} = 2 \times 9.10939 \times 10^{-28} \text{ g} \][/tex]

[tex]\[ m_{electrons\_total} = 18.21878 \times 10^{-28} \text{ g} \][/tex]

Next, we find the mass of the nucleus by subtracting the total mass of the electrons from the total mass of the atom:

[tex]\[ m_{nucleus} = m_{atom} - m_{electrons\_total} \][/tex]

[tex]\[ m_{nucleus} = 6.64648 \times 10^{-24} \text{ g} - 18.21878 \times 10^{-28} \text{ g} \][/tex]

[tex]\[ m_{nucleus} \approx 6.64648 \times 10^{-24} \text{ g} \][/tex]

(Note that the mass of the electrons is negligible compared to the mass of the nucleus, so the subtraction does not significantly change the value of [tex]\( m_{nucleus} \)[/tex].)

Now, we calculate the fraction of the atom's mass that is contributed by the nucleus:

[tex]\[ \text{Fraction} = \frac{m_{nucleus}}{m_{atom}} \][/tex]

[tex]\[ \text{Fraction} \approx \frac{6.64648 \times 10^{-24} \text{ g}}{6.64648 \times 10^{-24} \text{ g}} \][/tex]

[tex]\[ \text{Fraction} \approx 1 - \frac{18.21878 \times 10^{-28} \text{ g}}{6.64648 \times 10^{-24} \text{ g}} \][/tex]

[tex]\[ \text{Fraction} \approx 1 - 2.742 \times 10^{-4} \][/tex]

[tex]\[ \text{Fraction} \approx 0.999927 \][/tex]

Therefore, the fraction of the helium-4 atom's mass contributed by its nucleus is approximately 0.999927."

Answer:

a. 25.8 g of water

b. 1720.4 g of water

Explanation:

A percent by mass, means the grams of solute in 100 g.  of solution. So, 16.2 g of urea are contained in 100 g of solution.

Then, solute mass + solvent mass = solution mass

16.2 g of urea + solvent mass = 100 g

solvent mass = 100 g - 16.2 g → 83.8 g

Now we can make the rule of three:

16.2 g of urea use 83.8 g of water

then, 5 g of urea would use (5 . 83.8) / 16.2 = 25.8 g of water

b. 1.5 % by mass, means 1.5 g of solute in 100 g of solution.

So water mass, for this solution will be 100 g - 1.5 g = 98.5 g

Now, we apply the rule of three:

1.5 g of solute use 98.5 of water

26.2 g of solute will use (26.2  . 98.5)/1.5 = 1720.4 g

The 5.00 g of urea in the preparation of a 16.2 percent by mass solution need 25.8 gram of water and 26.2 g of magnesium Chloride in the preparation of a 1.5 percent by mass solution needs 1720.4 g of water.

Percent by mass solution, means the grams of solute in 100 g. of solution.

(A) So, 16.2 g of urea are contained in 100 g of solution.

So, 83.8 water added to make 16.2 g solution.

Thus, 5 g of urea need

[tex]\bold {\dfrac { (5\times 83.8)} { 16.2} = 25.8 g}[/tex]

(B). 1.5 % by mass, means 1.5 g of solute in 100 g of solution.  

So, 98.5 g of water added to prepare 1.5 % solution.      

26.2 g of Magnesium Chloride will use

[tex]\bold {\dfrac {26.2 \times 98.5}{1.5} = 1720.4 g}[/tex]

Therefore, the 5.00 g of urea in the preparation of a 16.2 percent by mass solution need 25.8 gram of water and 26.2 g of magnesium Chloride in the preparation of a 1.5 percent by mass solution needs 1720.4 g of water.

To know more about percent by mass solution.

https://brainly.com/question/15136748

Answer:

The Ocean

Explanation:

The ocean is the second largest reservoir of carbon. Microbial activities carried out in deep oceans and seas leads to the release of carbon into the environment and due to low level of depletion in the lithosphere its been stored up and .

Answer:

Option 3.

364.1 g of CO₂ are produced by the reaction

Explanation:

Let's verify the balance equation for this reaction:

Fe₃O₄  +   4 CO  →  3 Fe   +   4CO₂

Let's convert the mass of Fe₃O₄ to moles (mass / molar mass)

478.9 g / 231.55 g/mol  = 2.07 moles

Ratio is 1:4, so let's make a rule of three to determine the moles of CO₂ produced and then its mass.

1 mol of Fe₃O₄ is needed to produce 4 moles of CO₂

Then, 2.07 moles of Fe₃O₄ will produce (2.07  .4) /1 = 8.27 moles of CO₂.

Molar mass . moles = mass

44 g/mol . 8.27 mol = 364 g of CO₂

Answer:

6. 355.1 g of Na₂SO₄ can be formed.

7. 313 g of LiNO₃ were needed

Explanation:

Excersise 6.

The reaction is:  2 NaOH + H₂SO₄ --> 2 H₂O + Na₂SO₄

2 moles of sodium hydroxide react with 1 mol of sulfuric acid to produce 2 moles of water and 1 mol of sodium sulfate.

If we were noticed that the acid is in excess, we assume the NaOH as the limiting reactant. Let's convert the mass to moles (mass / molar mass)

200 g / 40 g/mol = 5 moles.

Now we apply a rule of three with the ratio in the reaction, 2:1

2 moles of NaOH produce 1 mol of sodium sulfate.

5 moles of NaOH would produce (5 .1)/2 = 2.5 moles

Let's convert these moles to mass (mol . molar mass)

2.5 mol . 142.06 g/mol = 355.1 g

Excersise 7.

The reaction is:

Pb(SO₄)₂+ 4 LiNO₃ → Pb(NO₃)₄  +  2Li₂SO₄

As we assume that we have an adequate amount of lead (IV) sulfate, the limiting reactant is the lithium nitrate.

Let's convert the mass to moles (mass / molar mass)

250 g / 109.94 g/mol = 2.27 moles

Let's make a rule of three. Ratio is 2:4.

2 moles of lithium sulfate were produced by 4 moles of lithium nitrate

2.27 moles of Li₂SO₄ would have been produced by ( 2.27 .4) / 2 = 4.54 moles.

Let's convert these moles to mass (mol . molar mass)

4.54 mol . 68.94 g/mol = 313 g

Answer:

80 liters

Explanation:

At STP, 1 mole of ideal gas has a volume of 22.4 liters.

Therefore, since liters and moles are directly proportional, we can use stoichiometry directly.

40L CH₄ × (2L H₂ / 1L CH₄) = 80L H₂

Answer:

Never leave an open flame unattended

Explanation: if an open flame is left unattended it can cause a fire outbreak so we have to watch it at all times to prevent the fire outbreak

Answer: option A. It is much greater

Explanation:

Answer:

The answer to your question is the original dose of Ba-142 was 1184 μg

Explanation:

Data

Total time = 1.25 hours

The Final amount of Ba = 9.25 μg

The Half-life of Ba = 10.6 minutes

Process

1.- Convert total time to minutes

                      1 h ----------------- 60 min

                       1.25 h ------------ x

                        x = 75 min

2.- Draw a table of this process

                   Final amount of Ba               Time

                           9.25                                 75 min

                           18.5                                  64.4 min

                           37                                     53.8 min

                           74                                     43.2 min

                          148                                     32.6 min

                          296                                    22  min

                          592                                    11.4 min

                         1184                                      0.8 min        

To calculate the molar concentration of HNO3 in the solution, use the balanced chemical equation to determine the mole ratio and then calculate the moles of HNO3 used. Finally, divide the moles of HNO3 by the volume of the solution to get its molar concentration.

To calculate the molar concentration of HNO3, we first need to use the balanced chemical equation to determine the mole ratio between HNO3 and LiOH. The balanced equation is 2HNO3 + 2LiOH → 2LiNO3 + H2O. From the equation, we can see that 2 moles of HNO3 react with 2 moles of LiOH. Since we know the molar concentration of LiOH and the volume used, we can calculate the moles of LiOH used: (12.5 mL)(1.0x10^-4 M) = 0.00125 moles of LiOH. Since the mole ratio is 1:2, the moles of HNO3 used would be half of that, which is 0.000625 moles of HNO3. Now, we can use the volume of the HNO3 solution to calculate its molar concentration:

Molar concentration of HNO3 = (0.000625 moles) / (25.0 mL) = 0.025 M HNO3

Final answer:

The molar concentration of HNO3 is 5.00x10-5 M.

Explanation:

To calculate the molar concentration of HNO3, we first need to determine the number of moles of LiOH used in the titration. The molarity of the LiOH solution is given as 1.0x10-4 M, and the volume used is 12.5 mL (0.0125 L).

moles of LiOH = Molarity x Volume = (1.0x10-4 M) x (0.0125 L) = 1.25x10-6 mol

Since the balanced chemical equation shows a 1:1 ratio between LiOH and HNO3, the number of moles of HNO3 is also 1.25x10-6 mol.

To find the molar concentration of HNO3, we use the volume of the HNO3 solution, which is 25.0 mL (0.025 L).

Molarity of HNO3 = moles of HNO3 / Volume = (1.25x10-6 mol) / (0.025 L) = 5.00x10-5 M HNO3

Answer:

The answer to your question is m = 3.2

Explanation:

Molality is defined as the number of moles of a solute dissolved in a mass of solvent (kg).

Data

moles of solute = 43.6

mass of solvent = 13.5 kg

Formula

Molality = [tex]\frac{number of moles}{Kg of solvent}[/tex]

Substitution

Molality = [tex]\frac{43.6}{13.5}[/tex]

Simplification and result

Molality = 3.2

The initial temperature of the ethylene glycol is equal to 40.5°C.

The specific heat capacity is defined as the amount of heat required to raise the temperature of one unit of material by one degree Celsius. The specific heat capacity of the material depends upon the nature of the material.

The mathematical expression is used to calculate the specific heat is equal to:

[tex]Q = mC \triangle T[/tex]

Given, the mass of the sample of ethylene glycol, m = 31.4 g

The final temperature of the sample, T₂ = 32.5°C = 305.5 K

The specific heat capacity of ethylene glycol, C =  2.42 J/g·K

The heat lost from the sample, Q = - 607 J

The initial temperature of the sample:

- 607 = 31.4 × 2.42 × (305.5 - T₁)

305.5 - T₁ = - 7.988

T₁ = 313.49 K

T₁ = 40.5°C  

Therefore, the initial temperature of the ethylene glycol is 40.5°C.

Learn more about specific heat capacity, here:

https://brainly.com/question/28302909

#SPJ2

The initial temperature of ethylene glycol can be found by rearranging the equation q = mcΔT and dividing the heat lost by the product of the mass and specific heat capacity, considering the known final temperature and that the ethylene glycol is cooling down.

To calculate the initial temperature of ethylene glycol when it loses heat, we can use the equation that relates heat loss to temperature change, q = mcΔT, where q is the heat lost, m is the mass, c is the specific heat capacity of the substance, and ΔT is the change in temperature. Given that ethylene glycol loses 607 J of heat (q), has a mass of 31.4g (m), and a specific heat capacity of 2.42 J/g·°C (c), and the final temperature is 32.5°C, we can rearrange the equation to solve for the initial temperature, T_initial.

The heat lost is negative because the ethylene glycol is cooling down, so we have: -607 J = 31.4g × 2.42 J/g·K × (32.5°C - T_initial). Solving for T_initial we find that the initial temperature of the ethylene glycol is higher than the final temperature of 32.5°C by an amount resultant from dividing the heat lost by the product of the mass and the specific heat capacity.

Answer: A) ionic salt

Explanation: Chlorine has a high electronegativity of 3.0. Copper like most metals has a low electronegativity, So the bonding is ionic making the compound an ionic salt.

The larger atomic radius of potassium, as compared to sodium, is due to the increase in the principal quantum number, n, as you move down a group in the periodic table. This denotes an increase in electron shells, which increases the atomic radius. A less effective nuclear charge on more distant electrons also contributes to the larger size.

Compared to sodium, the atomic radius of a potassium atom is larger primarily because of the increase in the principal quantum number, n, which leads to larger radii. Potassium, like other elements in its group, has more electron shells than sodium, which causes its size to be larger.

As one moves down the groups in the periodic table, the number of electron shells increases. This means that the principal quantum number (n), which denotes the electron shell number (energy level), increases. As a result, the atomic radius also increases. In the case of potassium and sodium, Potassium is placed below Sodium on the periodic table, thus it has a higher principal quantum number, i.e., more electron shells, which increases the atomic radius.

This phenomenon can also be explained using the concept of effective nuclear charge. This refers to the pull exerted by the nucleus on the outermost electrons. As you move down a group, more shells of electrons are being added and hence the outermost electrons are not as strongly pulled by the nucleus, thus increasing the atomic radius.

https://brainly.com/question/3588338

#SPJ11

Answer : The true statements are:

(a) Emulsions are a type of colloid

(b) The particles of a colloid are larger than the particles of a solution

(d) Many colloids scatter light (tyndal effect)

Explanation :

Colloid : It is defined as the solution in which the one substance is insoluble in another solution that means the insoluble substance rotating in the solution.

The particles of a colloid are larger than the particles of a solution.

Colloid do not separate on standing.

Cannot be separated by filtration.

Scatter light (Tyndall effect).

For example :

Milk is considered as a colloid because various substances (fats, proteins etc..) are present in milk which are suspended in a solution.

Suspension : It is a heterogeneous mixture in which some of the particles are settle down in the mixture on standing or over time.

The particles in a suspension are far larger than those of a solution.

Emulsion : It is a mixture of two or more liquids that are normally immiscible.

Emulsions are a type of colloid.

Dalton described the relationship between atoms and elements in terms of the composition of elements and the combination of atoms to form compounds.

Dalton described the relationship between atoms and elements in the following way:

https://brainly.com/question/13157325

#SPJ6

Dalton described elements as being made up of a single, unique type of atom. Atoms of different elements differ in properties. Atoms combine in fixed, whole-number ratios to form compounds.

John Dalton, the English chemist, proposed a theory that is fundamental to understanding chemical elements and atoms. According to Dalton's atomic theory:

Hence, Dalton described the relationship between atoms and elements by stating that each element is composed of one kind of atom unique to that element, which can combine to form more complex structures.

Answer:

The answer to your question is 1.46 moles of KMnO₄

Explanation:

Data

number of moles = ?

mass = 230.8 g

molecular mass of KMnO₄ = 39 + 55 + (16 x 4) = 158 g

Process

1.- Use proportions and cross multiplication to answer this problem.

                          158 g of KMnO₄ ----------------  1 mol

                           230.8 g of KMnO₄ -----------    x

                           x = (230.8 x 1) / 158

2.- Simplifying

                           x = 230.8 / 158

3.- Result

                          x = 1.46 moles