The difference between two numbers is 15. When twice the smaller number is subtracted from three times the larger number, the difference is 58.What is the larger number?

Explanation:

Average acceleration is the change in velocity over the change in time:

a = (v − v₀) / t

In the x direction:

aₓ = (6.11 cos (-54.2°) − 5.33 cos (37.9°)) / 2.00

aₓ = -0.316 m/s²

In the y direction:

aᵧ = (6.11 sin (-54.2°) − 5.33 sin (37.9°)) / 2.00

aᵧ = -4.11 m/s²

To find the average acceleration, decompose the given velocities into their x and y components. Then calculate the change in velocities in both directions divided by the time interval.

The average acceleration of a particle can be found using the change in velocity and the time interval. The given velocities are in magnitude and direction, so we need to decompose these into their x and y components. The initial and final x-components are Vix = 5.33 m/s cos(37.9°) and Vfx = 6.11 m/s cos(54.2°), respectively. The average x-direction acceleration (ax) can be calculated as ax = (Vfx - Vix)/time. Similarly, the initial and final y-components are Viy = 5.33 m/s sin(37.9°) and Vfy = 6.11 m/s sin(54.2°), respectively. The y-direction acceleration (ay) is ay = (Vfy - Viy)/time.

https://brainly.com/question/33442003

#SPJ2

Final answer:

The angle theta required for the water main to turn from north to east can be determined by treating the grades as the rise over run and using vector addition with trigonometry to find the resultant direction and its angle east of north.

Explanation:

To determine the angle theta (θ) required for the water main to make the turn from north to east with a 12.5% grade in the north direction and a 20% grade in the east direction, we need to use vector addition and trigonometry. The water main's path can be viewed as containing two components: one in the north direction and one in the east direction. We will represent these as vectors and find their resultant to determine the required angle between them.

The grades can be understood as the rise over run, which means the north vector has a rise of 12.5 units for every 100 units of run, and the east vector has a rise of 20 units for every 100 units of run. To find the resultant vector, we can use the arctangent function:

θ = arctan(opposite/adjacent) = arctan(east grade / north grade) = arctan(0.20 / 0.125) = arctan(1.6)

Once we calculate θ, this will give us the angle between the north direction and the resultant direction of the water main. Keep in mind that this angle should be measured east of north to reflect the correct orientation of the water main's turn.

Answer:

Induced emf, [tex]\epsilon=2.2\ mV[/tex]

Explanation:

It is given that,

Rate of change of magnetic field, [tex]\dfrac{dB}{dt}=0.23\ T/s[/tex]

A UHF antenna is oriented at an angle of 47° to a magnetic field, θ = 47°

Diameter of the antenna, d = 13.4 cm

Radius, r = 6.7 m = 0.067 m

We need to find the induced emf of the antenna. It is given by :

[tex]\epsilon=-\dfrac{d\phi}{dt}[/tex]

Where

[tex]\phi[/tex] = magnetic flux, [tex]\phi=BA\ cos\theta[/tex]

So, [tex]\epsilon=\dfrac{d(BA\ cos\theta)}{dt}[/tex]

B = magnetic field

[tex]\epsilon=A\dfrac{d(B)}{dt}\ cos\theta[/tex]

[tex]\epsilon=\pi r^2\times \dfrac{dB}{dt}\times cos(47)[/tex]

[tex]\epsilon=\pi (0.067\ m)^2\times 0.23\ T-s\times cos(47)[/tex]

[tex]\epsilon=0.0022\ V[/tex]

[tex]\epsilon=2.2\ mV[/tex]

So, the induced emf of the antenna is 2.2 mV. Hence, this is the required solution.

Answer:

The answer would be "His moment of inertia is 4 times the girl's"

The statement true about the boy's moment of inertia with respect to the axis of rotation  is "His moment of inertia is 4 times the girl's".

The moment of inertia is the amount of rotation obtained by an object when it is in state of motion or rest.

A boy and a girl are riding on a merry-go-round that is turning. The boy is twice as far as the girl from the merry-go-round's center. The boy and girl are of equal mass.

Moment of inertia is given by I = mr²where m is the mass and r is the distance from the axis of rotation.

For girl, I = mr²

For boy with twice the distance from axis

I = m(2r)²I = 4mr²

On comparison, we have The boy's moment of inertia is 4 times less than the girl's.

Thus, the statement true about the boy's moment of inertia with respect to the axis of rotation  is "His moment of inertia is 4 times the girl's".

Learn more about moment of inertia.

https://brainly.com/question/15246709

#SPJ2

Answer:

Area of the plates of a capacitor, A = 0.208 m²

Explanation:

It is given that,

Charge on the parallel plate capacitor, [tex]q = 5.7\ \mu C=5.7\times 10^{-6}\ C[/tex]

Electric field, E = 3.1 kV/mm = 3100000 V/m

The electric field of a parallel plates capacitor is given by :

[tex]E=\dfrac{q}{A\epsilon_o}[/tex]

[tex]A=\dfrac{q}{E\epsilon_o}[/tex]

[tex]A=\dfrac{5.7\times 10^{-6}\ C}{3100000\ V/m\times 8.85\times 10^{-12}\ F/m}[/tex]

A = 0.208 m²

So, the area of the plates of a capacitor is 0.208 m². Hence, this is the required solution.

Answer:

4.15 x 10^6 N

Explanation:

Area, A = 1.43 cm^2 = 1.43 x 10^-4 m^2

mass, m = 60.5 kg

Weight, F = m g = 60.5 x 9.8 = 592.9 N

Pressure = Force / Area

P = Weight / Area

P = 592.9 / (1.43 x 10^-4)

P = 4.15 x 10^6 N

Answer:

29.0 g

Explanation:

The mass of the piece of gold is given by:

m = dV

where

m is the mass

d is the density

V is the volume of the piece of gold

The density of gold is

d = 19.3 g/cm^3

while the volume of the sample is equal to the volume of displaced water, so

V = 64.5 mL - 63.0 mL = 1.5 mL

And since

1 mL = 1 cm^3

the volume is

V = 1.5 cm^3

So the mass of the piece of gold is:

m = (19.3 g/cm^3)(1.5 cm^3)=29.0 g

Answer:

T = 2010 N

Explanation:

m = mass of the uniform beam = 150 kg

Force of gravity acting on the beam at its center is given as

W = mg

W = 150 x 9.8

W = 1470 N

T = Tension force in the wire

θ = angle made by the wire with the horizontal =  47° deg

L = length of the beam

From the figure,

AC = L

BC = L/2

From the figure, using equilibrium of torque about point C

T (AC) Sin47 = W (BC)

T L Sin47 = W (L/2)

T Sin47 = W/2

T Sin47 = 1470

T = 2010 N

The tension in the cable supporting a 150 kg beam can be calculated by equating the weight of the beam to the vertical component of the tension in the cable. Solve 150 kg * 9.8 m/s² = T * sin(47°) for the tension T to find the force exerted by the cable.

The question concerns the calculation of the tension in the cable supporting a uniform beam. We begin by recognizing that this is a static situation with a beam of mass 150 kg in equilibrium. Thus, the total of the forces in the vertical direction must equal zero.

The forces acting on the beam are its weight (downwards) and the vertical component of the tension in the cable (upwards). The weight of the beam can be calculated by multiplying its mass by gravity g (approximately 9.81 m/s²), resulting in a downward force of 1471.5 N. The vertical component of the tension can be calculated using the sine function: T_vertical = T * sin(θ), where T is the total tension in the cable.

By setting the weight equal to the vertical component of the tension, we can solve for T: 150 kg * 9.8 m/s² = T * sin(47°). Solve this equation for the tension T to find the magnitude of the force exerted by the cable. This tension, along with its vertical and horizontal components, help maintain the beam in its horizontal position.

https://brainly.com/question/30804213

#SPJ3

Answer:

a) 51.8 m, b) 27.4 m/s, c) 142 m

Explanation:

Given:

v₀ = 42.0 m/s

θ = 60.0°

t = 5.50 s

Find:

h, v, and H

a) y = y₀ + v₀ᵧ t + ½ gt²

0 = h + (42.0 sin 60.0) (5.50) + ½ (-9.8) (5.50)²

h = 51.8 m

b) vᵧ = gt + v₀ᵧ

vᵧ = (-9.8)(5.5) + (42.0 sin 60.0)

vᵧ = -17.5 m/s

vₓ = 42.0 cos 60.0

vₓ = 21.0 m/s

v² = vₓ² + vᵧ²

v = 27.4 m/s

c) vᵧ² = v₀ᵧ² + 2g(y - y₀)

0² = (42.0)² + 2(-9.8)(H - 51.8)

H = 142 m

(a) The height of the cliff is 51.82 m

(b) The final velocity of the stone before it strikes A is 27.36 m/s

(c) The maximum height reached by the stone is 67.50 m

The given parameters;

(a) The height of the cliff is calculated as;

[tex]h_y = v_0_yt - \frac{1}{2} gt^2\\\\h_y = (v_0\times sin(\theta)) t \ - \ \frac{1}{2} gt^2\\\\h_y = (42\times sin(60))\times 5.5 \ - \ (0.5\times 9.8\times 5.5^2)\\\\h_y = 200.05 - 148.23\\\\h_y = 51.82 \ m[/tex]

(b) The final velocity of the stone before it strikes A is calculated as;

The vertical component of the final velocity

[tex]v_f_y = v_0_y - gt\\\\v_f_y = (v_0 \times sine (\theta)) - gt\\\\v_f_y = (42\times sin(60) - (9.8\times 5.5)\\\\v_f_y = -17.53 \ m/s[/tex]

The horizontal component of the final velocity

[tex]v_x_f = v_0\times cos(\theta)\\\\v_x_f = 42 \times cos(60)\\\\v_x_f = 21 \ m/s[/tex]

The resultant of the velocity at point A;

[tex]v_f = \sqrt{v_x_f^2 + v_y_f^2} \\\\v_f = \sqrt{(21)^2 + (-17.53)^2} \\\\v_f = 27.36 \ m/s[/tex]

(c) The maximum height reached by the projectile;

[tex]H = \frac{v_o^2 sin^2(\theta)}{2g} \\\\H = \frac{[42 \times sin(60)]^2}{2\times 9.8} \\\\H = 67.50 \ m[/tex]

Learn more here: https://brainly.com/question/15162556

Answer:

The centripetal acceleration is 30 m/s²

Explanation:

Given that,

Radius = 0.30 m

Acceleration = 2.0 rad/s²

Time = 5.0

We need to calculate the centripetal acceleration

Using formula of angular velocity

[tex]\omega=a\times t[/tex]

Where,

a = acceleration

t = time

Put the value into the formula

[tex]\omega=2.0\times5.0[/tex]

[tex]\omega=10\ rad/s[/tex]

Using formula of centripetal acceleration

[tex]a_{c}=r\omega^2[/tex]

[tex]a_{c}=0.30\times10^2[/tex]

[tex]a_{c}=30\ m/s^2[/tex]

Hence, The centripetal acceleration is 30 m/s²

The centripetal acceleration of a point on the outer edge of the tire after 5.0 seconds is [tex]\( 30 \, \text{m/s}^2 \)[/tex].

The centripetal acceleration of a point on the outer edge of the tire after 5.0 seconds is given by the formula [tex]\( a_c = \omega^2 r \)[/tex], where [tex]\( \omega \)[/tex] is the angular velocity and [tex]\( r \)[/tex] is the radius of the tire.

First, we need to find the angular velocity at 5.0 seconds. Since the tire starts from rest and accelerates at a constant rate.

We can use the formula [tex]\( \omega = \omega_0 + \alpha t \)[/tex], where [tex]\( \omega_0 \)[/tex] is the initial angular velocity (0 rad/s in this case, since the tire starts from rest), [tex]\( \alpha \)[/tex] is the angular acceleration ([tex]2.0 rad/s^2[/tex]), and [tex]\( t \)[/tex] is the time (5.0 s).

Plugging in the values, we get:

[tex]\( \omega = 0 + (2.0 \, \text{rad/s}^2)(5.0 \, \text{s}) = 10.0 \, \text{rad/s} \)[/tex]

Now that we have the angular velocity, we can calculate the centripetal acceleration:

[tex]\( a_c = \omega^2 r = (10.0 \, \text{rad/s})^2(0.30 \, \text{m}) \)[/tex]

[tex]\( a_c = 100 \, \text{s}^{-2} \times 0.30 \, \text{m} \)[/tex]

[tex]\( a_c = 30 \, \text{m/s}^2 \)[/tex]

Answer:

[tex]8.0\cdot 10^5 N/C[/tex]

Explanation:

Outside the sphere's surface, the electric field has the same expression of that produced by a single point charge located at the centre of the sphere.

Therefore, the magnitude of the electric field ar r = 5.0 cm from the sphere is:

[tex]E=k\frac{q}{(R+r)^2}[/tex]

where

[tex]k=8.99\cdot 10^9 N m^2C^{-2}[/tex] is the Coulomb's constant

[tex]q=2.0 \mu C=2.0 \cdot 10^{-6}C[/tex] is the charge on the sphere

[tex]R=10 cm = 0.10 m[/tex] is the radius of the sphere

[tex]r=5.0 cm = 0.05 m[/tex] is the distance from the surface of the sphere

Substituting, we find

[tex]E=(8.99\cdot 10^9 Nm^2 C^{-2})\frac{2.0\cdot 10^{-6} C}{(0.10 m+0.05 m)^2}=8.0\cdot 10^5 N/C[/tex]

The magnitude of the electric field due to this sphere at the given distance is 8 x 10⁵ N/C.

The given parameters;

The magnitude of the electric field due to this sphere at the given distance is calculated using Coulomb's law;

[tex]E = \frac{kQ}{R^2}[/tex]

where;

R = (0.1 + 0.05) m = 0.15 m

[tex]E = \frac{8.99\times 10^{9} \times 2\times 10^{-6}}{(0.15)^2} \\\\ E= 8 \times 10^{5} \ N/C[/tex]

Thus, the magnitude of the electric field due to this sphere at the given distance is 8 x 10⁵ N/C.

Learn more here:https://brainly.com/question/12806826

Answer:

The moment of inertia of the wheel is 0.593 kg-m².

Explanation:

Given that,

Force = 82.0 N

Radius r = 0.150 m

Angular speed = 12.8 rev/s

Time = 3.88 s

We need to calculate the torque

Using formula of torque

[tex]\tau=F\times r[/tex]

[tex]\tau=82.0\times0.150[/tex]

[tex]\tau=12.3\ N-m[/tex]

Now, The angular acceleration

[tex]\dfrac{d\omega}{dt}=\dfrac{12.8\times2\pi}{3.88}[/tex]

[tex]\dfrac{d\omega}{dt}=20.73\ rad/s^2[/tex]

We need to calculate the moment of inertia

Using relation between torque and moment of inertia

[tex]\tau=I\times\dfrac{d\omega}{dt}[/tex]

[tex]I=\dfrac{I}{\dfrac{d\omega}{dt}}[/tex]

[tex]I=\dfrac{12.3}{20.73}[/tex]

[tex]I= 0.593\ kg-m^2[/tex]

Hence, The moment of inertia of the wheel is 0.593 kg-m².

Answer:

0.593 kg-m²

Explanation:

edg.

The speed of the wave is 309 m/s.

The equation given is y = (0.0120 m)sin[(927 rad/s)t - (3.00 rad/m)x], where y represents the displacement of a string particle and x represents the position of the particle on the string. The wave is traveling in the +x direction. To find the speed v of the wave, we need to determine the wave velocity. The wave velocity is given by the formula v = ω/k, where ω is the angular frequency and k is the wave number.

In the equation y = (0.0120 m)sin[(927 rad/s)t - (3.00 rad/m)x], the angular frequency is 927 rad/s and the wave number is 3.00 rad/m. Therefore, the wave velocity is v = 927 rad/s / 3.00 rad/m = 309 m/s.

(a) 26.1 Nm

The magnitude of the torque exerted by a force acting perpendicularly to a surface is given by:

[tex]\tau = Fr[/tex]

where

F is the magnitude of the force

r is the distance from the pivot

In this situation,

F = 47.5 N is the force applied

[tex]r=\frac{1.10 m}{2}=0.55 m[/tex] is the distance from the hinges (the force is applied at the center of the door)

So, the magnitude of the torque is

[tex]\tau = (47.5 N)(0.55 m)=26.1 Nm[/tex]

(b) 52.3 Nm

In this case, the force is applied at the edge of the door farthest from the hinges. This means that the distance from the hinges is

r = 1.10 m

So, the magnitude of the torque is

[tex]\tau =(47.5 N)(1.10 m)=52.3 Nm[/tex]

The magnitude of torque applied about the axis of the door when the force is applied at the center is 26.125 N.m

The magnitude of the torque applied at the edge farthest from the center  is 52.25 N.m.

The given parameters;

The torque applied by the janitor is the product of applied force and perpendicular distance.

τ = F.r

The torque applied about the axis of the door when the force is applied at the center.

[tex]\tau = F \times \frac{r}{2} \\\\\tau = 47.5 \times \frac{1.1}{2} \\\\\tau = 26.125 \ N.m[/tex]

The magnitude of the torque applied at the edge farthest from the center ;

[tex]\tau = F\times r\\\\\tau = 47.5 \times 1.1\\\\\tau = 52.25 \ N.m[/tex]

Learn more here:https://brainly.com/question/12473935

Answer:

The current source is 1 mA.

Explanation:

Given that,

Voltage = 10 V

Resistor = 10 k ohm

We need to calculate the current

Using formula of transformation theorem

The source transformation must be constrained is given by

[tex]v_{s}=iR_{s}[/tex]

Where, V = voltage

I = current

R = resistor

Put the value into the formula

[tex]10=i\times10\times10^{3}[/tex]

[tex]i =\dfrac{10}{10\times10^{3}}[/tex]

[tex]i = 0.001\ A[/tex]

[tex]i=1\ mA[/tex]

Hence, The current source is 1 mA.

By using Ohm's Law (I = V/R), it can be determined that for a voltage source Vs = 10 V in series with a resistor of 10 kOhm, the current source would be 1mA after source transformation.

The question asks for the current value in a circuit when the source transformation theorem is applied. This involves using Ohm's law, which in basic form states that the current through a resistor equals the voltage across the resistor divided by the resistance. It's represented by the equation I = V/R.

In our case, the voltage (V) is 10 volts, and the resistance (R) is 10 kilo-Ohms or 10,000 Ohms. Applying Ohm's law gives I = V/R, so I = 10V/10,000Ω = 0.001 A. However, because the question asks for the current in milliamperes (mA), we need to convert from amperes to milliamperes, knowing that 1A = 1000mA. Therefore, 0.001A = 1mA.

https://brainly.com/question/36009177

#SPJ12

Answer:

Explanation:

In case of rotational motion, every particle is rotated with a same angular velocity .

The relation between linear velocity and angular velocity is

V = r w

Where v is linear velocity, r is the radius of circular path and w be the angular velocity.

Here w is same for all the particles but every particle has different radius of circular path I which they are rotating, so linear velocity is differnet for all.

Answer:

Voltage of the secondary coil is 720 volts.

Explanation:

Number of turns in primary coil, N₁ = 60

Number of turns in secondary coil, N₂ = 360

Input rms voltage of primary coil, V₁ = 120 V

We have to find the output rms voltage of the secondary coil. The relationship between the number of coil and voltage is given by :

[tex]\dfrac{N_1}{N_2}=\dfrac{V_1}{V_2}[/tex]

[tex]\dfrac{60}{360}=\dfrac{120}{V_2}[/tex]

V₂ = output rms voltage of the secondary coil.

After solving above equation, we get :

V₂ = 720 V

Hence, the output rms voltage of the secondary coil is 720 volts.

Answer:

160 km

Explanation:

g = 9.8 m/s^2, g' = 9.3 m/s^2

Let h be the height from ocean level.

Use the formula for acceleration due to gravity at height.

g' = g (1 - 2h/R)

The radius of earth is 6400 km

9.3 = 9.8 ( 1 - 2 H / R)

0.05 = 2 h/R

h = 0.05 × 6400 / 2 = 160 km

Answer:

The sound level is 34 dB.

(A) is correct option.

Explanation:

Given that,

Distance from a source of sound [tex]r_{1}=20 m[/tex]

Sound level [tex]L_{1}= 40\ dB[/tex]

Distance from a source of sound[tex]r_{2}=40\ m[/tex]

We need to calculate the sound level

Using equation

[tex]L_{2}=L_{1}-|20 log(\dfrac{r_{1}}{r_{2}})|[/tex]

[tex]L_{2}=40-|20 log(\dfrac{20}{40})|[/tex]

[tex]L_{2}=40-|20 log(0.5)|[/tex]

[tex]L_{2}=33.9\ dB[/tex]

[tex]L_{2}=34\ dB[/tex]

Hence, The sound level is 34 dB.

The sound level decreases by 20 dB when the distance from the source is doubled because the intensity of sound decreases with the square of the distance. Thus, the sound level at 40 m would be 20 dB. The answer is option C.

When the observer moves from a distance of 20 m to 40 m away from the source of sound, the sound intensity decreases. This is due to the inverse square law, which states that the intensity of sound is inversely proportional to the square of the distance from the source. Since the observer doubles the distance from the source, the intensity of the sound will be reduced to one-fourth. Because each 10-fold decrease in intensity corresponds to a reduction of 10 dB in sound level, halving the distance corresponds to an intensity ratio of 1/4, which is two factors of 10 (or 102 times less intense). Thus, the sound level decreases by 20 dB (2 factors of 10).

Therefore, at a distance of 40 m, the sound level would be 20 dB less than the original 40 dB, leading to a new sound level of 20 dB. The answer is option C: 20 dB.

Answer:

D. None of the above

Explanation:

There are only two forces acting on a pendulum:

- The force of gravity (downward)

- The tension in the string

We can consider the axis along the direction of the string: here we have the tension T, acting towards the pivot, and the component of the weight along this direction, acting away from the pivot. Their resultant must be equal to the centripetal force, so we can write:

[tex]T-mg cos \theta = m\frac{v^2}{r}\\T=m\frac{v^2}{r}+mg cos \theta[/tex]

where

T is the tension in the string

[tex]\theta[/tex] is the angle between the tension and the vertical

m is the mass

g is the acceleration of gravity

v is the speed of the pendulum

r is the length of the string

From the formula we see that the value of the tension, T, depends only on the value of v (the speed) and [tex]\theta[/tex], the angle. We notice that:

- Since [tex]\theta[/tex] and v constantly change, T must change as well

- At [tex]\theta=0^{\circ}[/tex] (equilibrium position), [tex]cos \theta=1[/tex] (maximum value), and also the speed v is maximum, so the tension has the maximum value at the equilibrium position

- For [tex]\theta[/tex] increasing, the [tex]cos \theta[/tex] decreases and the speed v decreases as well, so the tension T decreases: this means that the value of the tension will be minimum in the extreme positions.

So the correct answer is D. None of the above

Answer:

No

Explanation:

When the person slides down, the change in gravitational potential energy is converted into kinetic energy, according to

[tex]\Delta U = \Delta K\\mg\Delta h = \frac{1}{2}mv^2[/tex]

where

m is the mass of the person

g is the acceleration of gravity

v is the final speed

[tex]\Delta h[/tex] is the change in heigth of the person

Here we have assumed that the initial speed is zero.

Re-arranging the equation,

[tex]v = \sqrt{2g \Delta h}[/tex]

and we see that this quantity does not depend on the mass of the person, so every person will have the same speed at the bottom of the slide, equal to:

[tex]v=\sqrt{2(9.8 m/s^2)(3.2 m-1.2 m)}=6.3 m/s[/tex]

Answer:

Speed of car, v₁ = 55 m/s

Explanation:

It is given that,

Mass of Semi, m₁ = 9565 kg

Initial velocity of semi, u₁ = 55 m/s

Mass of car, m₂ = 992 kg

Initial velocity of car, u₂ = 0 (at rest)

Since, the collision between two objects is elastic and all the momentum is transferred to the car i.e final speed of semi, v₂ = 0

Let the speed of the car is v₁. Using conservation of linear momentum as :

[tex]m_1u_1+m_2u_2=m_1v_1+m_2v_2[/tex]

[tex]9565\ kg\times 55\ m/s+992\ kg\times 0=9565\ kg\times v_1+0[/tex]

v₁ = 55 m/s

Hence, the car move forward with a speed of 55 m/s.

Answer:

1047 miles

Explanation:

The radius of the Earth is

[tex]r = 4000[/tex] (miles)

So its circumference, which is the total length of the equator, is given by

[tex]L=2\pi r= 2\pi(4000)=25133 mi[/tex]

Now we know that the Earth rotates once every 24 hours. So the distance through which the equator moves in one hour is equal to its total length divided by the number of hours, 24:

[tex]L' = \frac{25133 mi}{24h}=1047 mi[/tex]

Answer:

The kinetic energy is 135183.99 J

Explanation:

Given that,

Mass = 1158 kg

Velocity = 55 km/h = 15.28 m/s

We need to calculate the kinetic energy

The kinetic energy is equal to the half of the product of the mass and square of velocity.

Using formula of kinetic energy

[tex]K.E=\dfrac{1}{2}mv^2[/tex]

[tex]K.E=\dfrac{1}{2}\times1158\times15.28^2[/tex]

[tex]K.E=135183.99\ J[/tex]

Hence, The kinetic energy is 135183.99 J

I₃ = 0.17 A into the junction.

The key to solve this problem is using Kirchhoff's Current Law which statements  that the algebraic sum of the currents that enter and leave a particular junction must be 0 (I₁+I₂+...+In = 0). Be careful, the currents that leaves a point is considered positive current, and the one that enters a point is considered negative.

In other words,  the sum of the currents that enter to the joint is equal to the sum of the currents that come out of the joint.

Three wire meet at junction. Wire 1 has a current of 0.40 A into the junction, the current of the wire 2 is 0.57 A out of the junction. What is the magnitude of the current in wire 3?

To calculate the current in the wire 3:

First, let's name the currents in the circuit. So:

The current in the wire 1 is I₁ = 0.40 A, the current in the wire 2 is I₂ = 0.57 A, and the current of wire 3 is I₃ = ?.

Second,  we make a scheme of the circuit, with the current I₁ of wire 1 into the junction, the current I₂ of wire 2 out of the junction, and let's suppose that the current I₃ of the wire 3 into the junction. (See the image attached)

Using Kirchhoff's Current Law, the sum of the currents I₁ and I₃ into the junction is equal to the current I₂ out of junction.

I₁ + I₃ = I₂

0.40 A + I₃ = 0.57 A

I₃ = 0.57 A - 0.40A

I₃ = 0.17 A

Checking the Kirchhoff's Current Law, the sum of all currents is equal to 0 :

I₁ + I₃ = I₂

I₁ - I₂ + I₃ = 0

0.40 A - 0.57 A + 0.17 A = 0

Let's suppose that the current I₃ of the wire 3 out the junction.

I₁ = I₂ + I₃

0.40 A = 0.57 A + I₃

I₃ = 0.40 A - 0.57 A

I₃ = -0.17 A which means that the current flow  in the opposite direction that we selected.

The magnitude of the current in wire 3 entering the junction is 0.17A. This result is based on the principle of conservation of electric current which states that the total current entering the junction must equal the total current exiting the junction.

This question involves the principle of the conservation of electric current, also known as Kirchhoff's Current Law. According to this concept, at any junction point the total current entering the junction is equal to the total current leaving the junction. In this case, if wire 1 has a current of 0.4A entering the junction and wire 2 has a current of 0.57A leaving the junction, the current in wire 3 would be the difference between these two values.

Since current can't be negative, if the current in wire 1 (entering the junction) is less than the current in wire 2 (exiting), the current in wire 3 must be entering the junction to balance the current flow.

Therefore, the magnitude of the current in wire 3 would be 0.57A - 0.4A = 0.17A. This means wire 3 has a current of 0.17A entering the junction.

https://brainly.com/question/8309214

#SPJ5

Answer:

Mass of the solution  = 54.75 g

Explanation:

Mass of solid dissolved = 4.75 g

Mass of the solution = Mass of solid dissolved + Mass of water.

Mass of water = Volume x Density

Volume = 50 mL = 50 cm³

Density = 1 g/cm³

Mass of water = 50 x 1 = 50 g

Mass of the solution = 4.75 + 50 = 54.75 g

Answer:

Capacitance of the second capacitor = 2C

Explanation:

[tex]\texttt{Capacitance, C}=\frac{\varepsilon_0A}{d}[/tex]

Where A is the area, d is the gap between plates and ε₀ is the dielectric constant.

Let C₁ be the capacitance of first capacitor with area A₁ and gap between plates d₁.

We have    

              [tex]\texttt{Capacitance, C}_1=\frac{\varepsilon_0A_1}{d_1}=C[/tex]

Similarly for capacitor 2

               [tex]\texttt{Capacitance, C}_2=\frac{\varepsilon_0A_2}{d_2}=\frac{\varepsilon_0A_1}{\frac{d_1}{2}}=2\times \frac{\varepsilon_0A_1}{d_1}=2C[/tex]

Capacitance of the second capacitor = 2C

Final answer:

The type of friction acting between the tires and the road when a car's tires roll freely without any slippage is static friction, as the tire's contact point with the road is momentarily at rest.

Explanation:

When a car's tires roll freely without any slippage, the type of friction acting between the tires and the road is static friction. This is because the bottom of the tire is at rest with respect to the ground for a moment in time, ensuring there's no relative movement between the contact surfaces. Static friction is what allows the car to move forward as it prevents the tires from slipping on the surface of the road. Once slipping occurs, for instance, if the tires are spinning without moving the car forward, it becomes kinetic friction. However, in a scenario where rolling without slipping occurs, it's due to the presence of static friction, which is necessary for proper motion and control of the vehicle.

Answer:

Work done, W = 5941 joules

Explanation:

It is given that,

Force exerted on the block, [tex]F=(200i-149j)\ N[/tex]

Displacement, [tex]x=(23i-9j)\ m[/tex]

Let W is the work done by the force do on the block during the displacement. Its formula is given by :

[tex]W=F.d[/tex]

[tex]W=(200i-149j){\cdot} (23i-9j)[/tex]                    

Since, i.i = j.j = k.k = 1

[tex]W=4600+1341[/tex]

W = 5941 joules

So, the work done by the force do on the block during the displacement is 5941 joules. Hence, this is the required solution.

Work is the energy transferred to an object by the application of force along a displacement. The work done by the force on the block during the displacement is 5941 J.

Work is the energy transferred to an object by the application of force along a displacement.

Given Here,

Displacement d = (23 m) i - (9 m) j

Force exerted on the block  F = (200 N) i - (149 N) j  

Work formula,

W = F.d

W =  (200 N) i - (149 N) j  . (23 m) i - (9 m) j

Since i.i = j.j = k.k = 1

Hence,

W = 4600 + 1341

W = 5941 J

Hence we can conclude that the work done by the force on the block during the displacement is 5941 J.

To know more about work formula, refer to the link:

https://brainly.com/question/22116319