Answer:
I believe the answer is 0.100.
Explanation:
Hope my answer has helped you!
Final answer:
To find the number of moles in 200 ml of a 0.500 M solution, convert the volume to liters (0.200 L) and multiply by the molarity to get 0.100 moles of solute.
Explanation:
To calculate the number of moles of solute in a 200 ml solution with a molarity of 0.500 M, you would use the formula:
Number of moles (mol) = Molarity (M)× Volume (L)
First, it is critical to convert the volume from milliliters to liters, knowing that there are 1000 ml in a liter:
200 ml is equivalent to 0.200 L.Next, you would use the given molarity of the solution to determine the moles of solute:
Moles of solute = 0.500 mol/L×0.200 LMoles of solute = 0.100 molSo, the solution contains 0.100 mol of solute.
2.5 moles of sodium chloride is dissolved
to make 0.050 liters of solution.
whats the question?????
What is the net charge of an ion that has 11 protons, 10 electrons, and 12 neutrons?
Answer:
+1
Explanation:
To calculate the charge on an ion, we simply use the number of protons and electrons. Protons are the positively charged subatomic particles. The electrons are the negatively charged particles in an atom.
When the number of protons are greater than that of electrons, the ion is positively charged.
When the number of protons are lesser than that of electrons, the ion is negatively charged.
When the number of protons and electrons are equal, the ion is neutral.
Charge = Protons - Electrons = 11 - 10 = +1
The net charge of an ion that has 11 protons, 10 electrons, and 12 neutrons is +1
Protons and electrons are used to determine the net charge on an ion. Protons are positively charged while electrons are negatively charged.
The net charge on an ion is the difference between the number of protons to the number of electrons.
The net charge of an ion = number of protons - number of electrons
The net charge of an ion = 11 - 10 = +1
Hence the net charge of an ion that has 11 protons, 10 electrons, and 12 neutrons is +1
Find out more at: https://brainly.com/question/12843101
When scientists are ready to publish the results of their experimentation, why is it important for them to inclue a description of the procedures they used?
A. To be accepted by other scientists, results of the experiment myust be published in journals that require decriptions of procedunes.
B. To qualify for publication, scientists are required to submit lists of materials and procedures.
C. To be vaid, experiments must be able to repeated by other scientists
it would be bbbbbbbbbbbbb
Answer: B. To qualify for publication, scientists are required to submit lists of materials and procedures.
Explanation:
Scientist publish their research reports, articles in journals, magazines and other authentic areas associated with the data of the scientific community. To satisfy the need of the publication the scientists are required to submit the entire research procedure which includes the materials and protocol used to conduct the research. This process will help the other scientists to conduct the same research and this will help them to make a contradiction or acceptance of the published research based upon the similarities and differences in the results of research.
Katrina inserts a key into her car’s ignition. She turns the key, putting her car into ignition mode. In this mode, some energy is used to increase the temperature of the car’s fuel. This energy allows the fuel to combust and the car to move. What’s this energy called?
Answer:
Activation energy
Explanation:
The energy is used to increase the kinetic energy of the molecules to a rate where they can cause successful collisions during the reaction process.
Any reacting particles must be at a certain temperature to cause a successful reaction.
when lead nitrate reacts whith sodium iodide, sodium nitrate and lead iodide are formed if i start with 25.0 grams of lead nitrate and 15.0 grams of sodium iodide, find the percent yield if this reaction forms 6.0 g of sodium nitrate during the experiment
Pb(NO3)2+ 2NaL--> PbL2+ 2NaNO3
So you find the moles of the lead nitrate by doing mass/Mr so 25/331.2 which gives you 0.075
Due to stoichiometry in the reaction we see 1:2 ratio so we do 0.075x2 gives 0.15 moles of NaNO3
Then mass: moles x Mr so 0.15 x 85= 12.75g is your theoretical
So % yield is actual/ theoretical x 100
Therefore 6.0g/12.75 g x 100 = 47%
Not sure if it’s correct hope it helps!
12.
Which of the following is the name given to the pairs of valence electrons that do not participate in bonding in diatomic oxygen molecules?
Final answer:
The pairs of valence electrons in diatomic oxygen molecules that do not participate in bonding are called lone pairs or unshared pairs (option D). These pairs are significant as they influence the molecule's shape and properties.
Explanation:
The name given to the pairs of valence electrons that do not participate in bonding in diatomic oxygen molecules is lone pair. These are also referred to as non-bonding electron pairs or an unshared pair (option D). In diatomic oxygen (O₂), each oxygen atom has six valence electrons. When two oxygen atoms form a molecule, they share two pairs of electrons, creating a double covalent bond. However, not all of the oxygen atom's electrons are involved in this bond; the remaining four electrons on each oxygen atom form two lone pairs.
The lone pairs are the electron pairs that reside in the outermost shell of the atom (valence shell) but are not shared or bonded with other atoms. These unshared electron pairs are responsible for the molecule's shape and properties, even though they do not participate directly in the bond formation with another atom.
Question 10 of 10
2 Points
Which of these is a drawback of oil extraction from tar sands?
A. It removes a biological community and creates a deep, open pit.
B. It can increase the frequency of earthquakes in the local area,
C. It can be used with both surface and underground mines.
D. It impacts a much larger area and obtains less oil than drilling.
SUBMIT
Answer:D. It impacts a much larger area and obtains less oil than drilling.
Explanation:
Oil extraction from tar sands is environmentally detrimental as it removes biological communities, creates large open pits, and yields less oil for a greater impacted area compared to traditional drilling.
Explanation:The drawback of oil extraction from tar sands is that it has significant environmental impacts. Unlike traditional oil drilling, which typically occurs in more discrete locations, tar sands require surface mining, which involves removing large areas of land, including any biological communities that reside in that area. This process creates a deep, open pit. Additionally, the process impacts a much larger area while yielding a relatively smaller amount of oil compared to conventional drilling methods. One of the environmental impacts includes the release of carbon dioxide, methane, and other air pollutants that contribute to atmospheric deterioration and climate change.
Explain how you calculate the net force in any direction on the box
The magnitude of the net force acting on an object is equal to the mass of the object multiplied by the acceleration of the object as shown in the formula below. If the net force acting on an object is zero, then the object is not accelerating and is in a state that we call equilibrium.
The net force in any direction on the box is the product of its mass and acceleration of box in direction of motion.
What is Force?The force is the action of push or pull which makes an object to move or stop.
The net force acting on any object is the product of the mass of the object and the acceleration of the object
F = m x a
If an object is moving with constant velocity, the net force acting on it is zero because the object will not be accelerating or in equilibrium state.
As, the acceleration is the vector quantity, the force is also a vector quantity. Thus, in the direction of force, the box will be accelerated.
Learn more about Force.
https://brainly.com/question/13191643
#SPJ2
Which statement is part of the kinetic molecular theory?
Answer:
Explanation:
Kinetic Molecular Theory states that gas particles are in constant motion and exhibit perfectly elastic collisions.The average kinetic energy of a collection of gas particles is directly proportional to absolute temperature only.
Answer: Kinetic Molecular Theory states that gas particles are in constant motion and exhibit perfectly elastic collisions.
Explanation: Kinetic Molecular Theory can be used to explain both Charles' and Boyle's Laws. The average kinetic energy of a collection of gas particles is directly proportional to absolute temperature only.
What is the formula for the compound barium hydroxide pentahydrate?
Answer: Ba(OH)2.5H20
Explanation:
The salt is a hygroscopic and contains 5 moles (penta) of water attached to it, hence the ".5H2O".
Yes, blue copper sulfate pentahydrate can be ground and used as a pigment for making paint. Copper sulfate pentahydrate is a compound that contains copper, sulfur, and oxygen. When ground into a fine powder, it can create a blue pigment that is commonly used in paint.
The reason why copper sulfate pentahydrate can be used as a pigment is because of its chemical properties. Copper sulfate pentahydrate has a vibrant blue color due to the presence of copper ions. These ions absorb certain wavelengths of light, reflecting only the blue color. When mixed with a binder, such as a resin or oil, the ground copper sulfate pentahydrate can be easily applied to a surface to create a blue hue.
However, it's important to note that copper sulfate pentahydrate can be toxic if ingested or inhaled, so precautions should be taken when handling and using it. It is always recommended to follow safety guidelines and use appropriate protective equipment when working with any potentially hazardous materials.
To know more about pentahydrate visit:
https://brainly.com/question/12778166
#SPJ11
Help ASAP ! Due tomorrow.
Answer:
1. 0.6678 atm.
2. 181.9 mm Hg.
3. 379.8 K = 106.8°C.
4. 691.8 mm Hg.
Explanation:
We can use the general law of ideal gas: PV = nRT.where, P is the pressure of the gas in atm.
V is the volume of the gas in L.
n is the no. of moles of the gas in mol.
R is the general gas constant,
T is the temperature of the gas in K.
If n and V are constant, and have different values of P and T "Lussac law":(P₁T₂) = (P₂T₁)
Q1:
∵ (P₁T₂) = (P₂T₁)
P₁ = 0.5 atm, T₁ = 25°C + 273 = 298 K.
P₂ = ??? atm, T₂ = 125°C + 273 = 398 K.
∴ P₂ = (P₁T₂)/(T₁) = (0.5 atm)(398 K)/(298 K) = 0.6678 atm.
Q2:
∵ (P₁T₂) = (P₂T₁)
P₁ = 47.0 mm Hg, T₁ = 77.0 K.
P₂ = ??? mm Hg, T₂ = 25°C + 273 = 298 K.
∴ P₂ = (P₁T₂)/(T₁) = (47.0 mm Hg)(298 K)/(77 K) = 181.9 mm Hg.
Q3:
∵ (P₁T₂) = (P₂T₁)
P₁ = 248.0 kPa, T₁ = 0°C + 273 = 273 K. .
P₂ = 345.0 kPa, T₂ = ??? K.
∴ T₂ = (P₂T₁)/(P₁) = (345.0 kPa)(273 K)/(248.0 kPa) = 379.8 K = 106.8°C.
Q4:
∵ (P₁T₂) = (P₂T₁)
P₁ = 745.0 mm Hg, T₁ = 22°C + 273 = 294 K. .
P₂ = ??? mm Hg, T₂ = 0°C + 273 = 273 K.
∴ P₂ = (P₁T₂)/(T₁) = (745.0 mm Hg)(273 K)/(294 K) = 691.8 mm Hg.
5,6-dimethyl-2-octyne
5,6-dimethyl-2-octyne is an organic compound with eight carbon atoms in the longest chain, a triple bond starting on the second carbon, and methyl groups attached to the fifth and sixth carbons.
Explanation:The subject of the question, 5,6-dimethyl-2-octyne, is a compound in organic chemistry. It is a type of Alkyne, a hydrocarbon with a carbon-carbon triple bond. In this case, 'octyne' tells us there are eight carbon atoms in the longest chain, with the triple bond starting at the second carbon. '5,6-dimethyl' tells us that there are methyl groups (-CH3) attached to the fifth and sixth carbons in the chain.
For comparison, consider 4-fluoro-4-methyl-1-octyne from your reference. '4-fluoro-4-methyl' indicates there is a methyl group and a fluorine atom on the 4th carbon, and '1-octyne' specifies there are eight carbons and the triple bond starts at the first carbon.
Learn more about 5,6-dimethyl-2-octyne here:https://brainly.com/question/34461137
#SPJ2
A balloon filled with air has volume of 4.24 liters at 23.00°c if the balloon is cooked at constant pressure to 5.00°c what is it’s new volume? The balloons volume at 5°c is _____ liters
Answer: pV = nRT , or V = \frac{nRT}{p} , with p - pressure, V - volume, n - amount of substance, T - temperature in K.
Then: \frac{V_2}{V_1} = \frac{n_2RT_2p_1}{p_2n_1RT_1}
n_2 = n_1 , p_2 = p_1
V_2 = V_1 \cdot \frac{T_2}{T_1} = 4.24 \frac {(273.00+5.00)}{(273.00+23.00)}=3.98 l Explanation
The new volume is calculated using the Charles law formula
that is V1/ T1 = V2/T2 where,
V1 = 4.24 l
T1= 23c into kelvin = 23 +273 =296 K
T2 = 5.00 c into kelvin = 5.00 + 273 = 278 K
V2 = ?
by making V2 subject the subject of the formula by multiplying both side by T2
V2 = V1 xT2/ T1
V2 = (4.24 L x 278 K) / 296 k =3.98 L
Read more on Brainly.com - https://brainly.com/question/10757208#readmore
Explanation:
Answer:
Explanation:
They need to receive commands from Earth and send the data they collect back to Earth. ... These radio dishes also receive the information sent to Earth by the spacecraft. NASA spacecraft operating well out of Earth's orbit use the Deep Space Network (DSN).
which of these is the most accurate description of the job of an art conservationist?
Answer:
Preserve paintings and different works of art
We have that for the Question "Which of these is the most accurate description of the job of an art conservationist?" it can be said that The option bearing the description "An art conservationist is a Person who's profession is to persevere art works for as much time as possible as it gains value over time just like wine" is the best description of the job of an art conservationist?
From the question we are told
Which of these is the most accurate description of the job of an art conservationist?
Generally
An art conservationist is a Person who's profession is to persevere art works for as much time as possible as it gains value over time just like wine
Therefore
The option bearing the description "An art conservationist is a Person who's profession is to persevere art works for as much time as possible as it gains value over time just like wine" is the best description of the job of an art conservationist?
For more information on this visit
https://brainly.com/question/19389275
What implications need to be considered when creating environmental policies?
Check all that apply.
How much will it cost?
How will it affect the environment?
How will it affect people?
Is the benefit worth the cost?
How will it reduce tourist activity?
Answer:
How will it affect the environment? Is its benefit worth the cost?
Explanation:
when creating environmental policies you should always look into if it is worth it or not and how it will affect the environment
Answer:
It is A,B,C and D
Explanation:
I just took the test
Why was the concern over global cooling replaced with a concern over global warming? a. The science community needed a cause to frighten the general population. b. Steady surface temperature increases were noted between the 1970’s and 90’s. c. Air pollution only became a concern in the 1980’s. d. Scientists observed severe ocean acidification.
Answer:
b. Steady surface temperature increases were noted between the 1970’s and 90’s.
Explanation:
It was the notable observation of steady rise in surface temperature on earth around the 1970’s that brought the issue of climate change into limelight.
One of the effect of climate change is that it causes global warming. Global warming is attributed to greenhouse gases which traps heat on the earth surface and causes the surface to warm. This can lead to melting of polar ice and an increase in water volume in oceans.
Answer:
b. Steady surface temperature increases were noted between the 1970’s and 90’s.
Explanation:
when 1.0g of diethyl ether is converted to vapor at its boiling point, about how much heat is absorbed? (C4H10O, Hvap= 15.7kj/mol, boiling point:34.6°C)
A) 2 J
B) 2 kj
C) 0.2 J
D) 0.2 kj
(Please show how you got the answer.)
Answer:
Option D = 0.2 Kj
Explanation:
Given data:
Mass of diethyl ether = 1.0 g
Hvap = 15.7 Kj / mol
Heat absorbed = ?
Solution:
Q = mass × Hvap / molar mass
Q = 1.0 g × 15.7 Kj / mol / 74.12 g/mol
Q = 15.7 Kj / 74.12
Q = 0.212 KJ
Answer:
its A)
Explanation:
FIRST TO ANSWER GETS BRAINLIEST
Which are true of meiosis but not mitosis? Check all that apply.A It generates genetically different cells.B It generates haploid cells.C It involves prophase, metaphase, anaphase, and telophase.D It involves two rounds of nuclear division.E It begins with a diploid cell.
Answer:
(A). It generates genetically different cells.
(B). It generates haploid cells.
(D). It involves two rounds of nuclear division.
Explanation:
Meiosis and mitosis are two types of cell division. Both meiosis and mitotic include four phases, which are prophase, metaphase, anaphase, and telophase.
Mitosis takes place in somatic cells, during which two daughter cells with identical genetic composition as present in parent cell. Mitosis involves one round of nuclear division.
On the other hand, meiosis takes in germ cell, during which four daughter cells with different genetic composition as present in parent cell. It leads to formation of four haploid cells from a diploid parent cell. Meiosis involves two rounds of nuclear division to form haploid cells.
Thus, the correct options are option (A), (B), and (D).
Answer: A It involves two rounds of nuclear division.
It generates haploid cells.
It generates genetically different cells.
Explanation:
Which of the following accurately describes rill erosion?
A. Fast-moving water from heavy rainfall forms deep channels.
B. A raindrop hits the ground and displaces the surrounding soil.
C. Runoff from heavy rainfall forms narrow, shallow channels.
D. Runoff removes soil and loose sediment in thin layers
Answer:
C. Runoff from heavy rainfall forms narrow, shallow channels.
Explanation:
Erosion is the gradual washing away of the top layer of the soil or earth on which plant grows. There are three main types of erosion which are:
1. Sheet erosion
2. Gully erosion
3. Rill erosion
Rill erosion occurs when a soil layer is gradually being washed away by narrow stream channels called streamlets on the surface. After a heavy downpour, the streamlets facilitates the movement of water on the ground surface and in turn, earth materials are worn away.
When these streamlets becomes deeper, they form gullies. Gullies results into gully erosion.
When runoff removes soil and loose sediment in thin layers it is called sheet erosion.
A sample of gas with a volume of 2.0 L at STP is found to have a mass of 1.43 g. Calculate the molecular mass of this gas. Is it possible this gas is methane? Why or why not?
Answer:
15.9gmol⁻¹
The gas could have been methane when we compare the two molecular masses.
Oxygen gas, O₂ also shares this same number for its molecular mass. This would be the reason why it would not be methane.
Explanation:
Given parameters:
Volume of gas at STP = 2.0L or 2.0dm³(1L = dm³)
Mass of the gas = 1.43g
Unknown:
Molecular mass of the gas = ?
Solution
We can find the number of moles using the mole concept according to the equation below:
number of moles = ³⁻¹[tex]\frac{volume occupied(dm^{3} )}{22.4dm^{3}mol^{-1} }[/tex]
number of moles = [tex]\frac{2.0dm^{3} }{22.4dm^{3}mol^{-1} }[/tex]
number of moles = 0.089mol
Using this obtained number of moles, we can derive the molecular mass of the compound by using the relationship between mass and number of moles according to the equation below:
molecular mass = [tex]\frac{mass}{number of moles}[/tex]
molecular mass = [tex]\frac{1.43}{0.089}[/tex]
molecular mass of the gas = 15.9gmol⁻¹
The formula of methane gas is CH₄.
Let's calculate the molecular mass of methane using these atomic masses:
C = 12g and H = 1g
The molecular mass = 12 + (1x4) = 16gmol⁻¹
The gas could have been methane when we compare the two molecular masses.
Oxygen gas, O₂ also shares this same number for its molecular mass. This would be the reason why it would not be methane.
How many grams are in 98 L of o2 at stp
Answer:
139.9 g ≅ 140.0 g.
Explanation:
We can use the general law of ideal gas: PV = nRT.where, P is the pressure of the gas in atm (P = 1.0 atm, standard P).
V is the volume of the gas in L (V = 98.0 L).
n is the no. of moles of the gas in mol (n = ??? mol).
R is the general gas constant (R = 0.0821 L.atm/mol.K),
T is the temperature of the gas in K (T = 273 K, standard T).
∴ n = PV/RT = (1.0 atm)((98.0 L)/(0.0821 L.atm/mol.K)(273 K) = 4.37 mol.
To find the grams of O₂, we can use the relation:n = mass/molar mass.
∴ mass of O₂ = (n)*(molar mass) = (4.37 mol)(32.0 g/mol) = 139.9 g ≅ 140.0 g.
is a process of reacting an acid with a base until an equivalence point is reached
Calorimetry
Distillation
Titration
Buretting
It’s TITRATION DJDKSKDKXKDKDKKD please name me brainest
who named earth if no one knew what earth was?
WOW! I never thought of that.... Is this a question on the test?
In a hydrogen fusion reaction two lighter hydrogen nuclei merge to form a heavier more stable helium nucleus. The energy that is released in a hydrogen fusion reaction is
Answer:
is very large and it provides the needed temperature for another set of fusion
Explanation:
Nuclear fusion is the combination of two atomic nuclei into larger ones.
One of such is used in making hydrogen bonds.
In nuclei fusion,
²₁ H + ²₁ H → ⁴₂He + energy
This is an example of nuclear fusion.
The energy helps to further the fusion process and a chain reaction occurs and a massive amount of energy is released.
Is hot dog relish homogeneous or heterogeneous
heterogenous, because it's a mix
Hot dog relish is a heterogeneous mixture because its composition is not uniform throughout. It contains visible differences in its components, such as pieces of vegetables like cucumber, onion, and peppers that are distributed unevenly in the relish.
Explanation:A hot dog relish is a heterogeneous mixture because its composition is not uniform throughout. Heterogeneous mixtures are characterized by having visible differences in their components. For example, hot dog relish contains small pieces of vegetables like cucumber, onion, and peppers that are distributed unevenly in the relish. You can visually identify the different components present in a hot dog relish, making it a heterogeneous mixture.
Learn more about Hot dog relish here:https://brainly.com/question/3646083
#SPJ12
The temperature of 15.71 grams of gold rises from 32°C to 1,064°C, and then the gold melts completely. If gold’s specific heat is 0.1291 joules/gram degree Celsius and its heat of fusion is 63.5 joules/gram, how much energy is gained by the gold?
The answer is:
The total energy gained is equal to 3091 Joules.
Why?To calculate how much energy is gained by the gold, we need to use the formula to calculate the heat transfer, it's defined by the following equation:
[tex]Q=mc\Delta T[/tex]
We know that the gold melts completely (it reached its melting point or fusion temperature), so, we need to rewrite the equation as follow:
[tex]Q=mc\Delta T+m\Delta H_{fusion}[/tex]
Where,
m,is the mass of the material
c, is the specific heat of the material
ΔT, is the change of temperature.
ΔH, is the heat of fusion of the material.
So, from the statement we know the following information:
[tex]m=15.74grams\\\\\Delta T=1064\°C-32\°C=1032\°C\\\\c=0.1291\frac{Joules}{gram\°C}\\\\m\Delta H_{fusion=15.71grams*\frac{63.5Joules}{gram}=997.59Joules[/tex]
Then, substituting and calculating, we have:
[tex]Q=mc\Delta T+m\Delta H_{fusion}[/tex]
[tex]Q=15.71grams*0.1291\frac{Joules}{gram\°C}*1032\°C+997.59Joules[/tex]
[tex]Q=2093.06Joules+997.59Joules=3090.65Joules=3091Joules[/tex]
Hence, we have that the total energy gained is equal to 3091 Joules.
Have a nice day!
Need help on this ASAP !!!!
Answer:
2Na + I₂ → 2NaI. "Synthesis reaction"
Explanation:
To balance the equation, you should apply the law of conservation of mass for the equations.The law of conservation of mass states that the no. of each atom is equal in both sides (reactants and products).
The balanced equation is:
2Na + I₂ → 2NaI.
It is a synthesis reaction that 2 reactants give 1 product.
That 2.0 mole of Na combined with 1.0 mole of I₂ to produce 2.0 moles of NaI.
The no. of all atoms is the same in both of reactants and products side.
Na (2), and I (2).
The reactions listed below are either chemical reactions or nuclear reactions. Which are nuclear reactions? Check all that apply.
It is seen that in first and third ones elements are not changed but only their chemical arrangements are changed. both are chemical reactions.
In the second and last one elements are changed after the reaction and as we know non chemical reactions are not capable of doing that so they are nuclear reactions.
There are other ways to tell like checking number of neutrons as well but in this simple case I don't think it is necessary to check those.
Good luck!
Answer:
B and D
Explanation:
Option A is incorrect as it is a neutralization reaction. Option C is incorrect as it an oxidation reaction, the rusting of iron to form iron oxide.
Option B and D are nuclear reactions called alpha decay.
In an alpha decay, a helium atom is released, and the daughter nucleus formed has atomic number 2 less than the parent nucleus and mass number 4 less than the parent nucleus.
I need help ASAP!!!!!!!!!
B. The hole in the ozone layer got smaller
C. The hole in the ozone layer over Antarctica got bigger.
If you look at the Dobson unit scale the lighter the color over Antarctic the greater the ozone hole gets.
In the image, two circles are centered at A. The circle containing B was dilated to produce the circle containing B′. What is the scale factor of the dilation?
The scale factor of a dilation is determined by comparing measurements of an original figure and its dilation. In the case of two-dimensional figures like circles, one common approach is to compare corresponding lengths or distances in both figures. In this case, without specific numerical measurements, we can't provide a concrete numerical value for the scale factor.
In order to find the scale factor of the dilation, it's important to understand what a dilation is first. In maths, when we are working with geometry, a dilation takes a figure and scales it larger or smaller. The scale factor is the measure by which the original figure is stretched or shrunk.
We calculate the scale factor by comparing the measurements of an original figure and its dilation. For two-dimensional figures, if we compare corresponding lengths in the pre-image and image, we can determine the scale factor. However, in this question, we aren't given specific numbers. If we assume the distance from A to B is r and from A to B' is r', the scale factor would then be r'/r.
In the special case of circles, a dilation centered at the center of the circle will create a similar circle with a scale factor equal to the ratio of their radii or, equivalently, to the square root of the ratio of their areas. If we had actual numeric values for those lengths or areas, we could provide a definite number for the scale factor.
Learn more about Scale Factor here:
https://brainly.com/question/30215044
#SPJ3