The topics covered by the study of thermodynamics include

a. energy changes during heating.

b. energy changes during chemical reactions.

c. color changes during chemical reactions.

d. Both (a) and (b)

Answer:

true

Explanation:

if the lens is curved differently or the material is changed then it would affect where the image is which is calculated using the focal point.

sorry I know I'm late but please let me know if I'm right, mark brainliest, and have a great day :)

Answer:

Within the core

Explanation:

The core of the sun (and of every star) is the central part of the star, the hottest one.

Its temperature is about 10 million Kelvin degrees and more - and this temperature is enough to allow the nuclei of hydrogen to overcome the electrostatic repulsion between each other and come close enough to initiate the nuclear fusion.

The nuclear fusion is the process that produces energy in a star: in a nuclear fusion reaction, the nuclei of hydrogen fuse together to form nuclei of helium, and since the mass of the final products is less than the mass of the initial products, part of the mass is converted into energy, according to Einstein's famous equation

[tex]E=mc^2[/tex]

Answer:

F is 250 N

d is 0 m

F x d

=250 x 0

=0

The answer is 0.0 J.

Answer:

0.0 J

Explanation:

Answer:

Because of the presence of air resistance

Explanation:

When an object is in free fall, ideally there is only one force acting on it:

- The force of gravity, W = mg, that pushes the object downward (m= mass of the object, g = acceleration of gravity)

However, this is true only in absence of air (so, in a vacuum). When air is present, it exerts a frictional force on the object (called air resistance) with upward direction (opposite to the motion of free fall) and whose magnitude is proportional to the speed of the object.

Therefore, it turns out that as the object falls, its speed increases, and therefore the air resistance acting against it increases too; as a result, the at some point the air resistance becomes equal (in magnitude) to the force of gravity: when this happens, the net acceleration of the object becomes zero, and so the speed of the object does not increase anymore. This speed reached by the object is called terminal velocity.

Answer: Gravity does not act on objects near Earth’s surface.

Explanation:

1) The total amount of energy in the universe remains constant.

4) Energy can be converted from one form to another.

5) Energy cannot be created or destroyed.

Best describes energy

Law of conservation of energy is the principle of physics according to which the energy of interacting bodies or particles in a closed system remains constant.

Total energy of any system always remains  constant . Also from law of conservation of energy it can be stated as energy can neither be created nor be destroyed ,it only transforms form one form to other form .

hence , option 1) : The total amount of energy in the universe remains constant.

4) Energy can be converted from one form to another.

5) Energy cannot be created or destroyed.

Best describes energy

learn more about  law of conservation of energy

https://brainly.com/question/12050604?referrer=searchResults

#SPJ2

Answer:

1, 3, 4, 5

Explanation:

took on edge

To calculate the average surface temperature of the star Sigma, you can use Wien's displacement law, which states that the wavelength of the peak intensity of radiation is inversely proportional to the temperature of the star. Using this equation, the average surface temperature of Sigma is 1 K.

To calculate the average surface temperature of the star Sigma, we can use Wien's displacement law. According to the law, the wavelength of the peak intensity of radiation is inversely proportional to the temperature of the star. The equation for the law is:

λmax = b / T

where λmax is the peak wavelength, T is the temperature, and b is Wien's displacement constant (approximately 2.8978 x 10-3 K·m).

In this case, we're given the peak intensity of radiation as 2 x 106 nm. Converting nm to meters:

2 x 106 nm = 2 x 106 x 10-9 m = 2 x 10-3 m

Substituting the values into the equation:

2 x 10-3 m = (2.8978 x 10-3 K·m) / T

Solving for T:

T = (2.8978 x 10-3 K·m) / (2 x 10-3 m)

T = 1.4489 K

Rounding to the nearest whole number, the average surface temperature of Sigma is 1 K.

https://brainly.com/question/33360033

#SPJ12

Answer: B) Velocity

Explanation:

Velocity is a vector quantity. Velocities have both magnitude and direction.

Answer:B. Velocity

Explanation:

The wavelength of an electromagnetic wave with a frequency of 8 ⋅ 10^14 Hz and speed of 3 ⋅ 10^8 m/s, calculated using the formula λ = V / F, is approximately 3.75 ⋅ 10^-7 meters.

To find the wavelength of an electromagnetic wave with a known frequency and speed, you can use the formula λ = V / F, where λ is the wavelength, V the speed of light, and F the frequency of the wave

Given that V (the speed of light) = 3 ⋅ 10^8 m/s and the frequency (F) = 8 ⋅ 10^14 Hz, substituting these values into the formula gives: λ = (3 ⋅ 10^8 m/s) / (8 ⋅ 10^14 Hz) .

Solving this equation, we find that the wavelength (λ) of the electromagnetic wave is approximately 3.75 ⋅ 10^-7 meters.

https://brainly.com/question/14316836

#SPJ3

Answer:

a change in position

a change in velocity

acceleration

a connection between acceleration, velocity,  and position

Explanation:

This physics lab is about studying the principles of motion. It involves measuring and recording the distance and time taken by a cart on a track to understand Newton's laws of motion, speed, and acceleration.

In this physics lab, the core principle being explored is motion. The student is expected to use a cart and a track set up to investigate and learn more about motion by measuring and recording the time that it takes the cart to cover specific distances. The motion of an object is dictated by the principles of physics, particularly Newton's laws of motion. In this case, the cart's motion on the track is described primarily by the first two of these laws.

The first law, also known as the inertia law, suggests that an object will retain its state of motion unless acted upon by an external force. This principle may help explain why the cart continues to move even after you stop applying force. The second law pertains to how the velocity of an object changes when it is subjected to an external force. By measuring different aspects of the cart’s motion, such as the distance it travels and the time it takes, students can calculate the speed and acceleration of the cart under different conditions. This direct, hands-on approach is a practical way to understand Newton’s laws and the concepts of speed and acceleration.

https://brainly.com/question/35591666

#SPJ2

Answer:

solid form

Explanation:

Heat is transferred by conduction in a solid form.

In general, sound (mechanical wave) travels faster in solids than in liquids or gases. This is because the speed of the mechanical waves is determined by a relationship between the elastic properties of the medium in which they are propagated and the mass per unit volume of the medium (that is: density).

In other words: The speed of sound varies depending on the medium through which the sound waves travel.

In addition, it varies with changes in the temperature of the medium. This is because an increase in temperature means that the frequency of interactions between the particles that transport the vibration increases, hence this increase in activity increases the speed. That is why the speed of sound in a gas is not constant, but depends on the temperature.

For example, the higher the air temperature, the greater the velocity of propagation.

Answer:

the type of medium and the temperature of the medium

Explanation:

edge quiz 2021

Answer: The electron moves slower than the speed of light

Explanation:

The de Broglie wavelength [tex]\lambda[/tex] is given by the following formula:

[tex]\lambda=\frac{h}{p}[/tex] (1)

Where:

[tex]h=6.626(10)^{-34}\frac{m^{2}kg}{s}[/tex] is the Planck constant

[tex]p[/tex] is the momentum of the atom, which is given by:

[tex]p=m_{e}v[/tex] (2)

Where:

[tex]m_{e}=9.11(10)^{-28}g=9.11(10)^{-31}kg[/tex] is the mass of the electron

[tex]v[/tex] is the velocity of the electron  (the value we want to find)

Substituting (2) in (1):

[tex]\lambda=\frac{h}{m_{e}v}[/tex] (3)

Finding [tex]v[/tex] :

[tex]v=\frac{h}{m_{e}\lambda}[/tex] (4)

[tex]v=\frac{6.626(10)^{-34}\frac{m^{2}kg}{s}}{(9.11(10)^{-31}kg)(3.31(10)^{-10}m/s)}[/tex] (5)

Finally:

[tex]v=2.197(10)^{6} m/s[/tex]>>> This is the velocity of the electron, which compared to the [tex]v=3(10)^{8} m/s[/tex] of the light is quite slower.

The electron's speed relative to the speed of light is calculated using the de Broglie wavelength formula, which determines the velocity of the electron. The formula is rearranged to solve for velocity and the given details are inserted into the formula to obtain the answer.

The electron's speed can be determined in relation to the speed of light using the de Broglie wavelength formula, which states that an electron's wavelength equals Planck's constant (6.63 x 10^-34 m^2 kg/s) divided by the electron's momentum. Momentum is the product of mass and velocity. The speed of the electron is then calculated by rearranging the formula to solve for velocity.

Given:
de Broglie wavelength, λ = 3.31×10−10 m
Mass of electron, m = 9.11x10^-31 kg
Planck's constant, h = 6.63 x 10^-34 m^2 kg/s
Speed of light, c = 3.00×10^8 m/s

Calculation:
Velocity of the electron, v = h / (m * λ)
The velocity of the electron relative to the speed of light is therefore v/c.

https://brainly.com/question/34225181

#SPJ12

Answer:

. The percentage water vapor in surface air varies from 0.01% at -42 °C (-44 °F) to 4.24% when the dew point is 30 °C (86 °F).

hope this helps :)

Explanation:

Answer:

0 to 4 percent

Explanation:

Water vapor varies by volume in the atmosphere from a trace to about 4%. Therefore, on average, only about 2 to 3% of the molecules in the air are water vapor molecules. The amount of water vapor in the air is small in extremely arid areas and in location where the temperatures are very low (i.e. polar regions, very cold weather). The volume of water vapor is about 4% in very warm and humid tropical air.

So, why can't the amount of water vapor in the air be greater than 4%? The answer is because temperature sets a limit to how much water vapor can be in the air. Even in tropical air, once the volume of water vapor in the atmosphere approaches 4% it will begin to condense out of the air (rain). The condensing of water vapor prevents the percentage of water vapor in the air from increasing. If temperatures were much warmer, there would be a potential to have more than 4% water vapor in the atmosphere. Think about the steam trapped in a tea kettle. The very warm temperatures and higher pressures allow for a large amount of water vapor to exist in the air within the tea kettle. Just from watching the steam leave the tea kettle, one can get an idea of the water vapor density within that kettle. The amount of water vapor within the air in the kettle is greater than 4%.

If the earth's oceans were placed on the planet Venus, the ocean water would boil into the atmosphere and produce a very dense steam (current surface temperatures on Venus are 900 degrees Fahrenheit with an average sea level pressure of 92,000 millibars, or 92 times that of Earth). Under this amount of enormous heat and pressure (hot enough to melt lead), water vapor would well exceed 4% of the atmosphere by volume. As a note, Venus does not have any significant amounts of water vapor; the atmosphere of Venus is 96% carbon dioxide and 3.5% nitrogen.

SO! Temperature determines the maximum amount of water vapor that can exist in the air. The higher the temperature, the greater the potential percentages of water vapor in the air, up to a maximum of approximately 4%.

Answer:

at 100°Celsius water starts to boil

For this case we have that by definition, the boiling temperature (boiling is the passage from liquid to gaseous state) of the water is dependent on the pressure to which the liquid is exposed.

At sea level, the boiling water temperature occurs at 100 degrees Celsius.

Answer:

100 degrees Celsius

The work done by the electric force to move a 1 c charge between two points is calculated by multiplying the charge by the electric potential difference between those points.

The work done by the electric force to move a 1 c charge from point a to point b depends on the electric potential difference, or voltage, between points a and b. The work done is calculated by the equation: Work = Charge * Electric Potential Difference. If we know the electric potential difference between points a and b, we can substitute it into the equation to find the work done. For example, if the potential difference between a and b is 5 volts, the work done to move a 1 c charge would be 1 c * 5 V = 5 Joules.

https://brainly.com/question/35147902

Answer:

hydrophilic

Explanation:

hydrophobic means it hates water so a hydrophobic material would separate from the water and just sit there (an example of this is oil)

Answer:energy times mass

Explanation: yeh

(a) [tex]24.6 m/s^2[/tex]

At a distance r=R from the centre of the planet, there is no effect due to the outer shell: so, the gravitational field strength at r=R is only determined by the gravity produced by the core of the planet.

So, the strength of the gravitational field is given by

[tex]g= \frac{GM}{R^2}[/tex]

where

G is the gravitational constant

M = 6.24 × 10^24 kg is the mass of the core of the planet

R = 4.11 × 10^6 m is the radius of the core

Substituting into the equation, we find

[tex]g= \frac{(6.67\cdot 10^{-11})(6.24\cdot 10^{24} kg)}{(4.11\cdot 10^6 m)^2}=24.6 m/s^2[/tex]

(b) [tex]13.7 m/s^2[/tex]

at distance r=3R from the centre, the particle feels the effect of gravity due to both the core of the planet and the outer shell between R and 2R.

So, we have to consider the total mass that exerts the gravitational attraction at r=3R, which is the sum of the mass of the core (M) and the mass of the shell (4M):

M' = M + 4M = 5M

Therefore, the gravitational acceleration at r=3R will be

[tex]g'= \frac{G(5M)}{(3R)^2}=\frac{5}{9}\frac{GM}{R^2} = \frac{5}{9}g[/tex]

And susbstituting

g = 24.6 m/s^2

found in the previous part, we find

[tex]g' = \frac{5}{9} (24.6 m/s^2)=13.7 m/s^2[/tex]

The gravitational acceleration at point R is approximately 9.85 m/s².  the gravitational acceleration at point 3R is approximately 1.09 m/s².

The formula for gravitational acceleration:

g = (G × M) / r²

where:

g is the gravitational acceleration,

G is the gravitational constant,

M is the mass of the planet,

and r is the distance from the center of the planet.

Given:

M = 6.24 × 10²⁴ kg

R = 4.11 × 10⁶ m

(a) At point R:

g = (G × M) / R²

g = (6.674 × 10⁻¹¹ × 6.24 × 10²⁴) / (4.11 × 10⁶)²

g = 9.85 m/s²

Therefore, the gravitational acceleration at point R is approximately 9.85 m/s².

(b) At point 3R:

g = (G × M) / (3R)²

g = (6.674 × 10⁻¹¹ × 6.24 × 10²⁴) / (3 × 4.11 × 10⁶)²

g = 1.09 m/s²

Therefore, the gravitational acceleration at point 3R is approximately 1.09 m/s².

To know more about the gravitational acceleration:

https://brainly.com/question/28556238

#SPJ6

Answer:

an atom is about a trillion times smaller then a speck of dust.

Explanation:

hope this helps :)

An atom is 4 times smaller than a speck of dust when both are compared.

The average radius of an atoms is  about 0.1 nm ( 0.1 x 10⁻⁹ m).

The average radius of a speck of dust is about 0.1 x 10⁻⁵ m.

The ratio of these particles can be compared as follows;

[tex]ratio = \frac{0.1 \times 10^{-4}}{0.1 \times 10^{-9}} = 10^4[/tex]

Thus, we can conclude that when a speck of dust is compared to an atom, an atom will be 4 times smaller than a speck of dust.

Learn more here:https://brainly.com/question/15950065

Answer:

Circle or pie graph is used to show how a part of something relates to the whole.

Explanation:

Pie graphs are easy to read and can present a very clear picture of the relationships.

Question:

The type of graph used to show how a part of something relates to the whole is which of the following? a. circle graph b. bar graph c. line graph d. direct proportion

Answer:

The type of graph used to show how a part of something relates to the whole is circle graph.

Explanation:

Circle graph also denoted as pie chart. It is generally used to show data analyzed in a small group. The circle graph is made in different parts based on the difference in the properties of the sample. It generally shows the relative analysis of each property for a given set of samples.

So, each parts in the circle graph will tell us the percentage of a property among the other properties present in the sample. Like we can say, if in a class of 100 students, 25 students are girls and 75 students are boys can be drawn in circle graph with two parts having smaller area for girl students and bigger area parts for boy students.

Answer:

Positrons are spontaneously emitted from the nuclei of potassium -37

Explanation:

Answer: potassium 37

Explanation:

Answer:

E) it absorbs a lot of heat when it melts because of hydrogen bonding

Choices:

A) it is composed only of water

B) it floats

C) it dilutes the taste

D) people like to chew it

E) it absorbs a lot of heat when

Answer:

E) it absorbs a lot of heat when it melts because of hydrogen bonding

Explanation:

With the exception of Asthma, all of those things, and a lot more that you don't want, could result from untreated diabetes.

Answer:

B. Numbness In Hands and Feet

C. Exhaustion

D. Weight Loss

E. Blurred Vision

Explanation:

It is now clear that light behaves as a wave and as a particle. It should be noted that the first to propose the corpuscular theory of light was Issac Newton, while the wave theory was initially proposed by Christian Huygens, who was contemporaneous with Newton.

Now, focusing on the corpuscular theory, Newton proposed that light is composed of tiny massless particles, traveling in a straight line and at high speed. In addition, he used the reflection phenomenon of the of light to show that it behaved like particles that when hitting a mirror were reflected by a perfectly elastic collision.

Answer:

Light does not need a medium to travel.

Explanation:

Sound is not a transverse wave; it is a longitudinal wave, with variations in pressure moving in the direction of the wave. Light and radio are electromagnetic and transverse waves, with electric and magnetic fields oscillating perpendicular to the direction of propagation.

The question you are asking about waves concerns whether they are transverse waves or longitudinal waves. Transverse waves involve a disturbance that moves perpendicular to the direction of the wave's travel. On the other hand, longitudinal waves involve disturbances that move in the same direction as the wave's travel. In your list, sound waves are the ones that are not transverse; they are longitudinal. Sound waves in air and water are composed of periodic variations in pressure that travel through the fluid medium.

In contrast, light waves and radio waves are types of electromagnetic waves, and they are inherently transverse waves. This means that the electric and magnetic fields oscillate perpendicular to the direction of wave propagation. Therefore, the correct answer to which one is not transverse is sound.

In nuclear fission, a heavy nucleus splits into two smaller, more stable nuclei, releasing a large amount of energy. These smaller nuclei are more stable because they are closer to the most stable nuclear configuration found in nickel and iron-sized nuclei.

Nuclear fission is the process in which a heavy nucleus splits into two smaller, more stable nuclei, accompanied by the release of energy. This occurs particularly with nuclei that have a mass number higher than 92. During fission, the original nucleus divides into two fragments that are not necessarily equal in size, but are usually closer to the size of iron-56, which is the most stable size for a nucleus. A notable example is the fission of uranium-235, where the nucleus splits into two smaller fragments and releases additional free neutrons and energy in the form of gamma rays.

The larger nucleus undergoing fission must rearrange its nucleons towards a configuration that is closer to that of the most stable nuclei, which are around the size of nickel and iron. This implies that during fission, the resulting nuclei are generally smaller and more stable compared to the original one. Therefore, the correct description of what forms in nuclear fission is two smaller, more stable nuclei (Option A).

Answer:

Answer is D.

Explanation:

Hope my answer has helped you!

Explanation:

There are some conventions while solving the problems based on mirrors. All parameters are taken like x-y coordinate system.

All the measurements are done from the optical centre of the mirror.

[tex]d_i[/tex] is the image distance

[tex]d_o[/tex] is the object distance

[tex]-d_i[/tex] is the image distance which is formed behind the mirror.

[tex]-d_o[/tex] is the object distance when an object is placed behind the mirror.

So, [tex]-d_i[/tex] shows the image that is located behind the mirror. Hence, this is the required solution.