Answer: The frequency of the given light is [tex]7.05\times 10^{16}s^{-1}[/tex]
Explanation:
To calculate the frequency of light, we use the equation:
[tex]\nu=\frac{c}{\lambda}[/tex]
where,
[tex]\lambda[/tex] = wavelength of the light = [tex]4.257\times 10^{-7}cm=4.257\times 10^{-9}m[/tex] (Conversion factor: 1 m = 100 cm)
c = speed of light = [tex]2.998\times 10^8m/s[/tex]
[tex]\nu[/tex] = frequency of light
Putting values in above equation, we get:
[tex]\nu=\frac{3\times 10^8m/s}{4.257\times 10^{-9}m}\\\\\nu=7.05\times 10^{16}s^{-1}[/tex]
Hence, the frequency of the given light is [tex]7.05\times 10^{16}s^{-1}[/tex]
The compound zinc fluoride is a strong electrolyte. write the transformation that occurs when solid zinc fluoride dissolves in water.
When solid zinc fluoride (ZnF2) dissolves in water, it dissociates into its constituent ions to form aqueous zinc ions (Zn^2+) and fluoride ions (F^-). This transformation represents a physical change known as dissociation. This reaction is typical for strong electrolytes like zinc fluoride due to the ionic bonds within the compound.
Explanation:The compound zinc fluoride (ZnF2) is a strong electrolyte, which means that it completely dissociates into its constituent ions when dissolved in water. The process of dissociation occurs when the ions in the solid separate and disperse uniformly throughout the solution. This is facilitated by water molecules that surround and solvate the ions, reducing the strong electrostatic forces between them.
When solid zinc fluoride dissolves in water, it forms aqueous zinc ions (Zn^2+) and fluoride ions (F^-). This can be represented by the equation:
ZnF2 (s) -> Zn^2+ (aq) + 2F^- (aq)
This transformation is a physical change known as dissociation. The term 'aq' denotes that the ions are in an aqueous solution, indicating that they have been solvated by water molecules. It's noteworthy that the compound zinc fluoride, by nature of it being an ionic bond, is a strong electrolyte, hence it will nearly completely dissociate when dissolved in water.
Learn more about Zinc Fluoride Dissolution here:https://brainly.com/question/5452058
Sort these elements into pairs that would most likely exhibit similar chemical properties Br ,Mg ,F ,Sr ,S ,O
Final answer:
Similar chemical properties in elements arise from their groupings in the periodic table. Bromine and Fluorine are paired as halogens; Magnesium and Strontium as alkaline earth metals; and Sulfur and Oxygen as chalcogens.
Explanation:
Elements that exhibit similar chemical properties are often found in the same group or family on the periodic table. The elements provided can be sorted into pairs based on their chemical behaviors and position in the periodic table:
Bromine (Br) and Fluorine (F): Both are halogens found in Group VII, known for their reactivity and tendency to form compounds by gaining one electron.Magnesium (Mg) and Strontium (Sr): These are alkaline earth metals found in Group II, which are shiny and good conductors of heat and electricity, with each forming compounds with oxygen in a ratio of one of their atoms to one oxygen atom.Sulfur (S) and Oxygen (O): Both belong to Group VI (the chalcogens) and can form compounds by gaining two electrons.In summary, similar properties in elements are a result of their position within the same group on the periodic table. For example, bromine and fluorine are both halogens, while magnesium and strontium are alkaline earth metals.
Which of the following can be natural sources of water pollution?
a.
volcanic activity
b.
earthquakes
c.
algae blooms
d.
all of the above
The natural sources of water pollution are algae blooms. Therefore, option C is correct.
What is water pollution ?Water contamination is the tainting of bodies of water, typically as a result of human activity, which has a detrimental impact on their uses. Aquifers, reservoirs, lakes, rivers, seas, and groundwater are all examples of bodies of water. When contaminants are introduced into these water bodies, water contamination results.
The main causes of water pollution are bacteria, viruses, parasites, insecticides, pharmaceuticals, plastics, feces, radioactive materials, fertilizers, and pesticides. These compounds are frequently invisible contaminants, since they do not always alter the color of the water.
The Industrial Revolution of the middle of the 19th century brought forth remarkable technological advancements, as well as new sources of air and water pollution. The repercussions of these developments started to be seen over the world by the middle of the 20th century.
Thus, option C is correct.
To learn more about water pollution, follow the link;
https://brainly.com/question/19920929
#SPJ6
Answer:
Algae Blooms
Explanation:
what is the mass of a 5.50 cm3 cylinder of a substance that has a density of 4.20 g/cm3
What is the relationship between mass and volume of a substance
Elements in the same group of the periodic table typically have ________.
Use the periodic table entry below to answer the following question.
What is the atomic mass of the element cobalt (Co)?
27
31
59
31.71
What is the correct name for the molecular compound n2s4?
The correct name for the molecular compound with chemical formula N₂S₄ is dinitrogen tetrasulfide.
What is chemical formula?Chemical formula is a way of representing the number of atoms present in a compound or molecule.It is written with the help of symbols of elements. It also makes use of brackets and subscripts.
Subscripts are used to denote number of atoms of each element and brackets indicate presence of group of atoms. Chemical formula does not contain words. Chemical formula in the simplest form is called empirical formula.
It is not the same as structural formula and does not have any information regarding structure.It does not provide any information regarding structure of molecule as obtained in structural formula.
There are four types of chemical formula:
1)empirical formula
2) structural formula
3)condensed formula
4)molecular formula
Learn more about chemical formula,here:
https://brainly.com/question/29031056
#SPJ2
Roberto and his sister had a garden in the backyard. Every spring they grew strawberries, like the plant you see here. Plants make their own food through the process of photosynthesis. What non-living parts of this backyard ecosystem are needed for the plant to survive?
During photosynthesis, sunlight shining on a plant is absorbed. Through several chemical reactions, the plant produces sugar, a high-energy compound, from simpler substances. What energy transformation occurs during this process?
Answer: radiant energy to chemical energy
Explanation:-
Radiant energy is the energy of electromagnetic waves.
Chemical energy is the energy stored in the bonds of molecules.
Photosynthesis is a phenomenon in which green plants containing chlorophyll use sunlight as a source of energy to convert carbon dioxide and water to form glucose and oxygen.
Photosynthesis is the process used by plants, algae and certain bacteria to convert energy from sunlight called as radiant energy and turn it into chemical energy in the form of glucose which is used as a source of energy by many organisms.
[tex]6CO_2+6H_2O\overset{sunlight}\rightarrow C_6H_{12}O_6+6O_2[/tex]
Why does a solid turn into a liquid when heat is added?
if an elements atomic mass is 70 and it has 39 neutrons how many protobs does it have? What element is this?
The element has 31 protons based on the given information, but its specific identity cannot be determined.
Explanation:The number of protons in an atom is determined by its atomic number. In this case, the element has 39 neutrons and a total atomic mass of 70. To find the number of protons, we subtract the number of neutrons from the atomic mass. So, the element has 31 protons.
The atomic number of an element determines its identity on the periodic table. However, with only the number of neutrons and the atomic mass given, it is impossible to determine the exact identity of the element. More information is needed to identify the element.
Learn more about atomic structure here:https://brainly.com/question/33054877
#SPJ2
Water molecules are __________.
a. composed of atoms joined by stable polar covalent bonds
b. attracted to each other because of their polar nature
c. capable of interacting with ions and polar molecules because of water being a polar molecule
d. all of the above are true
What is the mass number of an ion with 109 electrons, 157 neutrons, and a +1 charge?
Prepare approximately .1n hcl by putting the correct amount of concentrated acid in a glass bottle and
If a sample of gold is a cube what is the length of each edge in centimeters
To find the edge length of a cube made of gold, divide the mass of the gold sample by its density and take the cube root of the result.
Explanation:The edge length of a sample of gold, if it is in the form of a cube, can be determined using the concept of density. The density of gold is 19.3 g/cm³. To find the edge length, we need to divide the mass of the gold sample by its density. For example, if the mass of the gold sample is 10 grams, the volume is 10 g / 19.3 g/cm³ = 0.52 cm³. Since the sample is a cube, all three dimensions are equal, so the edge length would be the cube root of the volume. In this case, the edge length would be approximately 0.8 cm.
a hockey player has the puck in the corner of the rink. an opposing player muscles him aside and emerges with the puck. this situation is most analogous to which kind of reaction?
Answer: Single displacement
Explanation:
A single replacement reaction is one in which a more reactive element displaces a less reactive element from its salt solution. Thus one element should be different from another element.
A general single displacement reaction can be represented as :
[tex]A+BC\rightarrow AC+B[/tex]
Thus if A is more reactive than b, then A can displace B from its position and can combine with C to give AC and B.
Given:A hockey player has the puck in the corner of the rink. An opposing player muscles him aside and emerges with the puck. Thus it is similar to single displacement reaction.
Select the compound that is not organic.
1. Sucrose
2. Methane
3. Urea
4. Sodium Chloride
Answer:
Sodium chloride.
Explanation:
The organic compounds are compounds of carbon. They may have some other atoms like hydrogen, oxygen, sulfur, nitrogen, halogens etc. However the skeleton is of carbon only.
The simplest organic compound is methane (which is a hydrocarbon).
Sucrose is a disaccharide of glucose and fructose. It is an organic compound.
Urea is NH₂CONH₂, again an organic compound.
While Sodium chloride is NaCl, which has no carbon and it is an ionic inorganic compound.
(691)*(787100) rounded to the correct number of significant figures
Why are the amounts of products formed in a reaction determined only by the amount of limiting reactant?
The amount of product formed in a reaction is determined by the limiting reactant.
Explanation:The amount of product formed in a reaction is determined by the limiting reactant. The limiting reactant is the reactant that is completely consumed in a reaction, thus limiting the amount of product that can be formed. Let's say we have a reaction between hydrogen gas and oxygen gas to form water. If we have 4 moles of hydrogen and 2 moles of oxygen, the balanced chemical equation tells us that we need 2 moles of hydrogen for every 1 mole of oxygen. Since we have only 2 moles of oxygen, it will be completely consumed and we will only be able to form 4 moles of water, even though we have excess hydrogen.
Which of the following will occur soon after a population of prey increases slightly in size?
A) Predator population will remain the same.
B) Predator population will decrease greatly.
C) Predator population will decrease slightly.
D) Predator population will increase greatly.
E) Predator population will increase slightly.
Answer:
The Answer is E
Explanation:
Got it right on the test.
What is the mass, in grams, of a pure gold cube that has a volume of 3.20 cm3?
Final answer:
The mass of a pure gold cube with a volume of 3.20 cm³ is 61.76 grams. Using the density of gold (19.3 g/cm³), the mass is calculated by multiplying density by volume, with the final answer rounded to three significant figures as 61.8 grams.
Explanation:
To calculate the mass of a pure gold cube with a given volume, you use the density of gold. The density (d) of gold is known to be 19.3 g/cm³. Thus, if the volume of the gold cube is 3.20 cm³, the mass (m) is calculated as follows:
m = d × V
Where m is the mass, d is the density, and V is the volume. Plugging in the values:
m = 19.3 g/cm³ × 3.20 cm³
m = 61.76 grams
Therefore, the mass of the gold cube is 61.76 grams. We limit our final answer to three significant figures, so the mass is 61.8 grams.
The molar mass of iron oxide (Fe2O3) is 159.7 g/mol. What is the correct way to write the molar mass of iron oxide as a conversion factor?
the answer is C 159.7g Fe2O3/1 mol Fe2 O3
When writing the conversion factor for the molar mass of Fe2O3, it will be written as:
159.7 g Fe2O3 / 1 mol What is the conversion factor of iron oxide (Fe2O3) whose molar mass is 159.7 g/mol?The molar mass of a substance is the mass of one mole of that substance.
The molar mass of of iron oxide (Fe2O3) is 159.7 g/mol.
This means that 1 mole of iron oxide (Fe2O3) has a mass of 159.7 g.
Therefore, in writing the conversion factor, it will be written as:
159.7 g Fe2O3 / 1 molLearn more about molar mass at: https://brainly.com/question/15476873
Propane (C3H8), a fuel that is used in camp stoves, produces carbon dioxide (CO2) and water vapor (H2O) on combustion as follows. Mc032-1. Given that the molar mass of H2O is 18.02 g/mol, how many liters of propane are required at stp to produce 75g of H2O from this reaction
Answer : The volume of propane required are, 23.29 L
Solution : Given,
Mass of water = 75 g
Molar mass of water = 18 g/mole
First we have to calculate the moles of water.
[tex]\text{Moles of water}=\frac{\text{Mass of water}}{\text{Molar mass of water}}=\frac{75g}{18g/mole}=4.16moles[/tex]
Now we have to calculate the moles of propane.
The balanced chemical reaction will be,
[tex]C_3H_8+5O_2\rightarrow 4H_2O+3CO_2[/tex]
From the reaction, we conclude that
As, 4 moles of water produces from 1 mole of propane
So, 4.16 moles of water produces from [tex]\frac{4.16}{4}=1.04[/tex] mole of propane
Now we have to calculate the volume of propane.
As, 1 mole of propane contains 22.4 L volume of propane gas
So, 1.04 mole of propane contains [tex]22.4L\times 1.04=23.29L[/tex] volume of propane gas
Therefore, the volume of propane required are, 23.29 L
How is chemical sedimentary rock different from detrital sedimentary rock?
Chemical sedimentary rock and detrital sedimentary rock differ in terms of their formation and composition.
Explanation:Chemical sedimentary rock and detrital sedimentary rock are different in terms of how they form and their composition. Chemical sedimentary rocks are formed when dissolved minerals in water precipitate and solidify. Examples of chemical sedimentary rocks include limestone and rock salt. On the other hand, detrital sedimentary rocks are formed from the accumulation and lithification of fragments of other rocks. Examples of detrital sedimentary rocks include sandstone and shale.
an unknown substance undergoes a chemical chance that gives off heat. which of the following is true
The correct statement for a chemical change that gives off heat is that the molecule types change and the process is exothermic, as energy is released to the surroundings.
When an unknown substance undergoes a chemical change that gives off heat, the process is exothermic, and the types of molecules before and after the change are different. A chemical change that releases heat indicates that energy is a product of the reaction.
This is contrasted with an endothermic process where heat is absorbed, and the surroundings become colder. In exothermic reactions, bonds are formed which release more energy than the energy needed to break bonds in the reactants, hence the heat given off to the surroundings.
The correct statement for a chemical change that produces heat is: The types of molecules of the substance before and after the chemical change are different, and the change was exothermic.
Complete Question - An unknown substance undergoes a chemical change that gives off heat. Which statement is true?
The types of molecules of the substance before and after the chemical change are different, and the change was endothermic. The types of molecules of the substance before and after the chemical change are the same, and the change was exothermic. The types of molecules of the substance before and after the chemical change are the same, and the change was endothermic. The types of molecules of the substance before and after the chemical change are different, and the change was exothermic.The visible part of the electromagnetic spectrum consists of the colors that we see in a rainbow. Different colors correspond to different wavelengths of light. Which color of visible light has the longest wavelength?A.Violet B.Red C.Green D.Yellow
Among electromagnetic waves, UV rays are most dangerous because exposure to these radiation cause serious problems in living organism. Therefore, red color of visible light has the longest wavelength. The correct option is option B.
What is electromagnetic wave?Electromagnetic wave is a wave which contain two component one is electric component and other is magnetic component. The electric and magnetic component are perpendicular to each other. There are so many wave that comes under electromagnetic wave like infrared wave , radio wave, light wave.
There is a relation between frequency of wave, and wavelength of wave
Mathematically,
ν =c÷λ
where,
ν =frequency of light
c is speed of light
λ is the wavelength of light
Red color of visible light has the longest wavelength.
Therefore, red color of visible light has the longest wavelength. The correct option is option B.
To know more about electromagnetic wave, here:
https://brainly.com/question/12289372
#SPJ3
Although the nucleus of an atom is very important, it is the ___ of the atom that determine its chemical properties
It's the electrons of an atom that determine its chemical properties. Electrons participate in chemical reactions—and it's these electron interactions that govern the atom's chemistry. For instance, chlorine's reactions stem from its desire to gain an extra electron.
Explanation:Although the nucleus of an atom is indeed very important, it is the electrons of the atom that ultimately determine its chemical properties. This is because electrons involve in the chemical reactions.
In order for any chemical reaction to occur, there must be a movement, exchange or sharing of the electrons between two or more atoms. It's these electron interactions that govern the chemistry of the atom, hence determining its chemical properties.
For example, chlorine (Cl) has 7 electrons in its outermost shell and would prefer to gain an additional electron to achieve a complete outer shell. This electron 'hunger' is what fuels chlorine's reactions with other elements and compounds, thus determining its chemical properties.
Learn more about Atomic Structure here:
https://brainly.com/question/7328982
#SPJ6
The highest elevation Mt. Zembat in Alaska 40 years ago was measured at 7600 feet. Today the highest elevation is 7598 feet. What is the rate of change in elevation for this mountain?
The rate of change in elevation for Mount Zembat in Alaska is 0.05 feet per year, calculated by dividing the total change in elevation, 2 feet, over the 40-year period.
Explanation:To calculate the rate of change in elevation for Mount Zembat in Alaska, we take the difference in elevation over the time period and divide it by the number of years. Forty years ago, the mountain was measured at 7600 feet, and today it is measured at 7598 feet. Therefore, the elevation has decreased by 2 feet over 40 years.
The rate of change per year is calculated as follows:
Rate of change = (Initial elevation - Current elevation) / Time
Rate of change = (7600 feet - 7598 feet) / 40 years
Rate of change = 2 feet / 40 years
Rate of change = 0.05 feet per year
So, the rate of change in elevation for Mount Zembat is 0.05 feet per year.
Which compound is a carbohydrate?
A) sugar
B) water
C) olive oil
D) amino acid