The wavelength of some green light is 530.0 nm. what is the frequency of this green light?

Answers

Answer 1
Frequency is calculated by dividing the speed of light by the wavelength. Using the normal constant of 3x10^8 m/s divided by 530 nm you can calculate it. You need to convert nm to m so it is 5.3x10^-7. Divide the constant of light by that and you get 5.66 x10^14 hz, where hz is the function 1/s.
Answer 2

Answer:

The answer to this question is 5.66 x (10^14) Hz

Explanation: Recall that the frequency of a light wave is the speed of light divided by the wavelength in meters.

You are given the wavelength of the light in nanometers, but the denominator of the formula is in meters. In this case, multiply 530.0 nm by 10^-9 m, resulting 5.3 * (10^-7) m.

After the conversion, divide the speed of light which is 3.0 x (10^8) m/s by the wavelength in meters. The final answer should be 5.66 x (10^14) Hz.

**Depending on the usage of significant figures, you may have to round to the nearest specified decimal value or truncate it at the nearest specified place value.**


Related Questions

A certain car is accelerating at 5.0 km/h/s. Explain what is happening to the motion of the car.

Answers

the car is moving faster/accelerating quicker

Which category of materials does concrete belong to and why?
1. It’s a synthetic polymer because it’s a product of a chemical reaction.
2. It’s an alloy because it contains layers of different components.
3 .It’s a ceramic because it contains substances such as sand and clay.
4. It’s a composite because it’s a mixture of cement, sand, and other granular pieces.

Answers

4.  its a composite because its a mixture of cement, 

Answer:

Correct Answer is option 4 (It’s a composite because it’s a mixture of cement, sand, and other granular pieces.)

Explanation:

Concrete :

Concrete is a mixture which is made up of sand, cement, granular pieces and water. sand can be spread anywhere in liquid form and when it dries it becomes hard as stone. Concrete is used for making buildings.

Composite:

Composite is a material which is formed by mixing various element

Since Concrete is formed on mixing various element like cement, granular pieces, water and sand. Therefore concrete is a material which belong to composite category.

list three commonly used units for speed

Answers

They are: Miles per hour(mph), kilometers per hour(km/h), meters per second(m/s).

Hope this helped.
Knots,feet per second, kilometers per hour, miles per hour, etc..

Question 6. B) and c)

Answers

The formula for both is v(t) = v0 + a*t

b) v(8) = 0 + 6m/s^2 *8s = 48 m/s

now we know the beginning (2) and end speed (14), but not the time:

c) 14 = 2 + 1.5*t => t = (14-2)/1.5 = 8 seconds

A 4 kg car with frictionless wheels is on a ramp that makes a 25° angle with the horizontal. The car is connected to a 1 kg mass by a string that passes over a frictionless pulley.
What is the acceleration of the car?

Answers

Refer to the diagram shown below.

W₁ = (4 kg)*(9.8 m/s²) = 39.2 N
W₂ = (1 kg)*(9.8 m/s²) = 9.8 N

The normal reaction on the 4-kg mass is
N = (39.2 N)*cos(25°) = 35.5273 N
The force acting down the inclined plane due to the weight is
F = (39.2 N)*sin(25°) = 16.5666 N

The net force that accelerates the 4-kg mass at a m/²s down the plane is
F - W₂ = (4 kg)*(a m/s²)
4a = 16.5666 - 9.8
a = 1.6917 m/s²

Answer: 1.69 m/s²  (nearest hundredth)

When ethane (c2h6) reacts with chlorine (cl2) the main product is c2h5cl; but other products containing cl (chlorine), such as c2h4cl2, are also obtained in small quantities. the formation of these other products reduces the yield of c2h5cl. in a certain experiment 145 g of c2h6 reacts with 215 g of cl2. (a) assuming that c2h6 and cl2 react only to form c2h5cl and hcl, calculate the theoretical yield of c2h5cl?

Answers

Final answer:

To calculate the theoretical yield of C2H5Cl in the reaction between ethane and chlorine, you need to determine the limiting reactant and use stoichiometry to calculate the yield.

Explanation:

The reaction between ethane (C2H6) and chlorine (Cl2) produces mainly ethyl chloride (C2H5Cl), but other products such as dichloroethane (C2H4Cl2) may also be formed in smaller quantities. These additional products reduce the overall yield of ethyl chloride. To calculate the theoretical yield of C2H5Cl, we first need to determine the limiting reactant. This is done by comparing the stoichiometric ratios of the reactants: C2H6 and Cl2.

The balanced chemical equation for the reaction is:
C2H6 + Cl2 → C2H5Cl + HCl

To calculate the theoretical yield of C2H5Cl, you can use the following steps:

Convert the given masses of C2H6 and Cl2 to moles using their respective molar masses.Determine the mole ratio between C2H6 and C2H5Cl from the balanced equation.Use the mole ratio to calculate the moles of C2H5Cl that can be formed.Convert the moles of C2H5Cl to grams using its molar mass.

The resulting value will be the theoretical yield of C2H5Cl.

Through which does light travel best?

Answers

Light travels best through empty space because there is nothing to block/disrupt its path. 
There are no choices included with your question, so the space where the list should appear is a vacuum. Vacuum is the environment through which light travels best.

But hey ... When discussing light, what does "best" mean anyway ?

Fastest ? Least absorption ?
Least dispersion ? Least refraction ?
Most direct without bending ?
Least scattering ?

It's OK. Vacuum is the answer for any of those.

If you put a straw into a glass of water, the straw looks to be bent, although nothing has really happened to the straw. The term that describes this property of light is

Answers

The property of light describing this scenario is refraction.

Answer:

Because it is refracting

Discuss the properties of a scalar quantity. give an example of a scalar.

Answers

Answer:

A physical quantity which is described completely by its magnitude only, is called a scalar quantity.

Examples- Velocity ,Temperature, Speed

Properties

Scalar quantity does not have directions.It has magnitude onlyIt does not have directionIt is specified by a number and a unitIt is represented by quantity symbol

What properties determine the amount of inertia an object has?

Answers

The tendency of an object to resist changes in its state of motion varies with mass. Mass is that quantity that is solely dependent upon the inertia of an object. The more inertia an object has, the more mass it has. A more massive object has a greater tendency to resist changes in its state of motion.Hope this helps you! Good luck on your assignment and have a great day! :D 

You throw a ball upward from a window at a speed of 1.5 m/s. how fast will it be moving when it hits the sidewalk 2.6 m below?

Answers

List out all your variables; 

Initial Velocity (u)= 1.5 ms⁻¹
Final Velocity (v)=? 
Acceleration=9.8 ms⁻¹ (remains constant on free fall problems) 
Displacement (s)=-2.6 m 

v²=u²+2as 
v²=(1.5)²+2(-9.8)(-2.6) 
v²=53.21
v=√53.21
v= 7.2945 ≈ 7.3 ms⁻¹

Hope I helped :) 

You throw a ball upward from a window at a speed of 1.5 m/s. Ball will be moving with velocity when it hits the sidewalk 2.6 m below is  7.3 ms⁻¹.

What is velocity?

When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time. Uniform motion an object is said to have uniform motion when object cover equal distance in equal interval of time within exact fixed direction. For a body in uniform motion, the magnitude of its velocity remains constant over time.

Given in the question,

Initial Velocity (u)= 1.5 ms⁻¹

Final Velocity (v)=?

Acceleration=9.8 ms⁻¹ (remains constant on free fall problems)

Displacement (s)=-2.6 m

v² = u²+2as

v² = (1.5)²+2(-9.8)(-2.6)

v² = 53.21

v  = √53.21

v  = 7.2945 ≈ 7.3 ms⁻¹

Ball will be moving with velocity when it hits the sidewalk 2.6 m below is  7.3 ms⁻¹.

To learn more about velocity refer the link:

brainly.com/question/18084516  

  #SPJ5

4. Which statement best describes the movement of particles when a wave travels through a medium? The particles are (10 points)

A. moved along in a forward motion with the wave as it travels through the medium.

B.gathered by the energy of the wave and move along in the direction of the wave.

C. permanently displaced in a direction opposite to the direction of the wave.

D.temporarily displaced and return to their normal position when the wave passes.

Answers

the answer is D . temporarily displaced and return to their normal position whenthe wave passes.

Answer:

D.temporarily displaced and return to their normal position when the wave passes.

Explanation:

When a wave propagates in a medium, it does going through the particles that exist in that space.

Those are altered by the wave that crosses them but, that phenomenon only lasts the time takes to pass through, then the particles return to their natural state.

Steel has a density of 7.8 g/cm3. what is the mass of a block of steel with a volume of 600.0 cm3?

Answers

The mass of a steel block with a volume of 600.0 cm3 and a density of 7.8 g/cm3 is 4680 grams, or 4.68 kilograms.

To calculate the mass of a block of steel given its density and volume, you use the formula mass = density  imes volume. Since the density of steel is given as 7.8 g/cm3 and the volume of the block is 600.0 cm3, you can find the mass by multiplying these two numbers together. Therefore, the mass of the steel block is 7.8 g/cm3  imes 600.0 cm3 = 4680 grams or 4.68 kilograms when converted to kilograms.

If the labor force of 155 million people is growing by 1.0 percent per year, how many new jobs have to be created each month to keep unemployment from increasing?

Answers

First let us compute for the total growth in population.

Growth = 155 million * 0.01

Growth = 1.55 million

 

Since there are 12 months in a year, therefore the new jobs every month should be:

new jobs per month = 1.55 million / 12

new jobs per month = 0.129 million = 129,167 

To keep unemployment from increasing in a labor force of 155 million growing at 1.0 percent per year, around 129,167 new jobs need to be created each month.

If the labor force of 155 million people is growing by 1.0 percent per year, the total increase in the labor force per year would be 1.55 million people (155 million times 1%). To determine the number of new jobs needed to be created each month to keep unemployment from increasing, we divide this annual increase by 12 months. Thus, 1.55 million divided by 12 gives approximately 129,167 jobs that need to be created each month.

It takes 3.3 j of work to stretch a hooke's-law spring 15 cm from its unstressed length. how much the extra work is required to stretch it an additional 11.3 cm? answer in units of j.

Answers

Final answer:

The extra work required to stretch the Hooke's-law spring an additional 11.3 cm is 0.9375 J.

Explanation:

To find the extra work required to stretch the Hooke's-law spring an additional 11.3 cm, we can use the formula for the work done by a spring force: W = ½kx², where W is the work done, k is the spring constant, and x is the displacement. Given that it takes 3.3 J of work to stretch the spring 15 cm, we can first find the spring constant:

k = 2W / x² = 2(3.3 J) / (0.15 m)² = 146.67 N/m

Now we can calculate the extra work required to stretch the spring an additional 11.3 cm:

W' = ½kx'² = ½(146.67 N/m)(0.113 m)² = 0.9375 J

In a swimming pool, where is the greatest fluid pressure?

Answers

The greatest fluid pressure in a pool would be the deepest part of the pool. Because the deeper you go, the more pressure there is.

Answer:

At the bottom of swimming pool the pressure will be maximum.

Explanation:

Here as we know that pressure inside the water is given as

[tex]P = P_0 + \rho g h[/tex]

here we know that

[tex]P_0[/tex] = atmospheric pressure

[tex]\rho[/tex] = density of water

h = depth inside the water where pressure it to be required

So here from the above equation we know that pressure is increased as the depth inside the water is increased.

So in order to have maximum pressure inside the swimming pool we need to go at maximum depth position.

So it is at the bottom of the swimming pool pressure will be maximum.

Environmental factors can cause various changes in ecosystems. Which of the following would most likely have the greatest lasting effect on an ecosystem

Answers

Where are the answer choices?
But from prior knowledge: pollution from other sources(humans), lack of biodiversity and no stable food pyramid

*100% CORRECT ANSWERS

Question 1

Climate warming trends allow plant and insect species to inhabit larger ranges.

True

Question 2

What is a possible consequence of climate change to species that have a narrow temperature tolerance range?  

all of the above

Question 3

Which of the following is not a possible effect of rising carbon dioxide levels on plants?

increased plant mortality

Question 4

How does an early onset of spring through climate change affect plants?

their growing and flowering season starts earlier and is longer

Question 5

Environmental factors can cause various changes in ecosystems. Which of the following would most likely have the greatest lasting effect on an ecosystem?

change to the landscape from construction

Question 6

How does change to an ecosystem that results in succession benefit the ecosystem?

it leads to an increased level of biodiversity

Question 7

How do the benefits of natural change to ecosystems compare to the disadvantages?

the benefits outweigh the disadvantages

Question 8

Environmental factors can have various effects on ecosystems. In August 2005, Hurricane Katrina caused significant damage in several states along the Gulf Coast, including Alabama, Mississippi, and Louisiana. Thousands of people were evacuated from their homes due to flooding and other damage caused by the storm. What environmental impact would Hurricane Katrina not have caused?

early onset of spring

Question 9

Rising levels of carbon dioxide most likely

have a greater detrimental effect on the sea

Question 10

Which scenario best describes how climate trends might affect animal migration?

animals found at the equator may move north

In order for psychologists to be able to offer patient care, they must be __________.

A.
good
B.
caring
C.
licensed
D.
smart

Answers

Im pretty sure its C
I'd say the answer is C. Hope this helps.

Rowdy Ron, a racecar driver with a mass of 70kg, survived a crash at 175km/h. He came at rest ib only 0.027 seconds

Answers

Although the question is missing, with the provided information you can find the impact (impulse), the change of momentum, the force and the acceleration.

Data:

mass, m = 70 kg

velocity, v = 175 km/h = 175 km * 1000 m/km * 1 h / 3600 s = 48.61 m/s

time, t = 0.027 s

Impact = F * t = m * a * t = m * Δv = change of momentum

=> Impact = change of momentum = 70 kg * 48.61 m/s = 3402.7 N*s

Force, F:

Impact = F * t => F = impact / t = 3402.7 N*s / 0.027 s = 126,025.9 N

Acceleration, a:

F = m * a => a = F / m = 126,025.9 N / 70 kg = 1800 m/s^2

An object of mass 0.5 kg is swung in uniform circular motion. The radius is 2 meters, and the force exerted is 4 N. Calculate the magnitude of the velocity.

Answers

using
F= mv²/r
4 = 0.5×v² / 2
8 /0.5 = v²
v²=16
v= √16
v= 4 ms-¹

The magnitude of the velocity swung in uniform circular motion is equal 4 m/s.

Given the following data:

Mass of object = 0.5 kgRadius = 2 metersForce = 4 Newton

To calculate the magnitude of the velocity:

Mathematically, centripetal force is given by the formula:

[tex]F_c = \frac{mv^2}{r}[/tex]

Making v the subject of formula, we have:

[tex]V = \sqrt{\frac{F_c r}{m} }[/tex]

Substituting the parameters into the formula, we have;

[tex]V = \sqrt{\frac{4 \times 2}{0.5} }\\\\V = \sqrt{\frac{8}{0.5} }\\\\V =\sqrt{16}[/tex]

V = 4 m/s

Read more: https://brainly.com/question/17742679

When you sneeze, the air in your lungs accelerates from rest to 155 km/h in approximately 0.70 s . what is the acceleration of the air in m/s2?

Answers

62 m/s^2 First, convert 155 km/h to m/s 155 km/h * 1000 m/km / 60 min/h / 60 s/h = 43.05556 m/s Now take the speed in m/s and divide by the number of seconds it took to accelerate it to that speed. 43.05556 m/s / 0.70 s = 61.5 m/s^2 Since we only have 2 significant figures, round the result to 2 figures. 61.5 m/s^2 = 62 m/s^2

Final answer:

Acceleration is the rate of change of velocity over time. The acceleration of the air in m/s² when sneezing at 155 km/h in 0.70 s is approximately 61.51 m/s².

Explanation:

Acceleration is the rate of change of velocity over time. In this case, the air in your lungs accelerates from rest to 155 km/h in approximately 0.70 s. To calculate the acceleration in m/s², we convert the final velocity to m/s and use the formula for acceleration.

Given: Initial velocity = 0 m/s, Final velocity = 155 km/h = 43.06 m/s, Time = 0.70 s. Acceleration = (Final velocity - Initial velocity) / Time.

Substitute the values: Acceleration = (43.06 m/s - 0 m/s) / 0.70 s = 61.51 m/s².

What best describes the energy in a closed system at the beginning of a day and the energy at the end of the same day? Check all that apply.
Some energy can disappear after it has caused motion.
Some energy can be changed from one form to another.
Some energy can be lost to the environment around the system.
The total initial energy will be equal to the total final energy.
The total initial energy will be greater than the total final energy.
Friction can cause energy to be destroyed during the day.
Friction can cause the amount of thermal energy to increase.

Answers

The second, fourth, and seventh answers apply. Energy in a closed system is conserved, but it can change form
Answer:

The options which are apply on it;

2. Some energy can be changed from one form to another.

4. The total initial energy will be equal to the total final energy.

7.Friction can cause the amount of thermal energy to increase.

Energy can not be created or destroyed it can only be converted from one form to another.

Turquoise is what types of rocks sedimentary, metamorphic or igneous

Answers

turquoise is in metamorphic and sedimentary rocks. Hope that helped

Which method will correctly determine whether the forces on an object are balanced or unbalanced?
Add the forces in the horizontal direction to the forces in the vertical direction.
Add the forces in the horizontal and vertical directions separately.
Subtract the forces in the horizontal direction from the forces in the vertical direction.
Subtract the forces in the vertical direction from the forces in the horizontal direction.

Answers

Add the forces in the horizontal direction to the forces in the vertical direction.

All the outer planet have rings, but the planet with the most complex

Answers

All the outer planet have rings, but the planet with the most complex rings is Saturn.
Saturn is the second largest planet. Galilio Galilei first observed the ring system of Saturn in 1610.  Saturn is best known for its fabulous ring system with countless small particles, ranging from μm to m in size.

Approximating venus's atmosphere as a layer of gas 50 km thick, with uniform density 21 kg/m3, calculate the total mass of the atmosphere.

Answers

The diameter of Venus (from tables) is 12,100 km.
Therefore its radius is
r = 12100/2 = 6050 km = 6050 x 10³ m = 6.05 x 10⁶ m

The layer of gas is 50 km thick.
The outer radius of the surrounding layer of gas is
R = r + 50 x 10³ m
   = 6.05 x 10⁶ + 50 x 10³ m
   = 6.1 x 10⁶ m

The volume of the layer of gas is
V = [(4π)*3] * [(6.1 x 10⁶)³ - (6.05 x 10⁶)³] m³
    = [(4π)/3] * 5.535875 x 10¹⁸ m³
    = 2.318862 x 10¹⁹ m³

Because the density of the gas layer is 21 kg/m³, therefore the mass of the gas layer is
m = (21 kg/m³) * (2.318862 x 10¹⁹ m³)
    = 4.8696 x 10²⁰ kg

Answer: [tex]4.8696 \times 10^{20} \, kg[/tex]

4.9x10^20 kg Venus has a radius of 6051.8 km, so we'll assume the total volume of the atmosphere is the volume of a sphere with a radius of (6051.8 + 50) km minus the volume of Venus itself. So V = 4/3 pi r^3 6051.8 + 50 = 6101.8 The overall expression is V = 4/3 pi 6101.8^3 - 4/3 pi 6051.8^3 V = 4/3 pi (6101.8^3 - 6051.8^3) V = 4/3 pi 5539155986 V = 23202362337 V = 2.32x10^10 km^3 V = 2.32x10^19 m^3 Now multiply the volume by the density. So V = 2.32x10^19 m^3 * 21 kg/m^3 = 4.87x10^20 kg So the atmosphere of Venus has a mass of about 4.9x10^20 kg

An atom with 4 protons, 5 neutrons, and 4 electrons has an atomic mass of _____ amu. (Enter a whole number.)

Answers

atomic mass = number of protons + number of neutrons = 4+5 = 9 amu

Answer:

4+5=9 amu

Explanation:

Together, the number of protons and the number of neutrons determine an element's mass number: mass number = protons + neutrons.

Hope this helps! :)))))

Newton's second law of motion tells us that the net force applied to an object equals its ________.

Answers

time rate of change of momentum

What are the two most important properties of a telescope?

Answers

1.Light-collecting area
2.Angular resolution
Final answer:

The two key properties of a telescope include its light gathering ability, allowing the viewing of faint and distant objects, and resolving power, which enables detailed viewing of closely spaced objects.

Explanation:

The two most important properties of a telescope are its light gathering ability and resolving power. The light gathering ability, determined by the diameter of the lens or mirror, allows the telescope to collect more light which means the telescope can see fainter objects. For example, larger telescopes can see more distant stars and galaxies.

On the other hand, the resolving power, or the ability to distinguish between two closely spaced objects, depends on the quality of the optics and the viewing conditions. This property allows for the detailed viewing of objects. For instance, a telescope with high resolving power can detail the rings of Saturn or the craters of the Moon.

Learn more about Properties of Telescopes here:

https://brainly.com/question/32173790

#SPJ12


Which of the following is an accurate statement?



A. AC Generators produce current that is pulsating, but always remains positive.
B. Step-down voltage transformers have a different number of turns in the primary than in the secondary winding, so they change the incoming voltage to a higher voltage.
C. DC Generators produce current with a voltage that changes from positive to negative.
D. Step-up voltage transformers have a lower number of turns in the primary than in the secondary winding.

Answers

The correct option is D.
A step up voltage transformer is a type of transformer which increases voltage from primary to secondary turns. The transformer has more secondary winding turns than primary winding turns. A step up transformer is designed to increase voltage because high voltage increases efficiency.
Other Questions
Mr. Winkle downloaded 34 more songs than Mrs. Winkle downloaded.Together they downloaded 220 songs. How many songs did each download?Please show how you got it... Explain how the elements present on the surface of a star can be identified using bright line spectra Explain how you can use doubles when multiplying with 4 to find 4x8 Corrine is organizing a bus trip to an amusement park. She has 245 people signed up to go on the trip. The coach buses can seat 55 people per bus. How many buses should Corrine hire? Which sentence uses the most precise language? With so many steps in the instructions, we didn't know what to do next. With multiple steps in the instruction manual, we were unsure of the solution when the wheel detached from the bicycle. With so many steps in the instruction manual, we didn't know what to do after the wheel fell off. With those instructions, we were unsure of our next step after the wheel fell off the bicycle. The earth is about 4.6 billion years old, but the oldest ocean floor is only about 200 million years. how do you explain this? P = a + b + c Solve for c What uses numbers, variables and operations symbol? Which of the following words comes from a Spanish word? A. lariat B. chap C. boot D. ranch you are converting 68km to meters and your answer is 0.068 m explain why the answer is incorrect The sound of a police siren that is moving away has (1) _____ wavelengths, and one that is approaching has (2) ______ wavelengths.1) a. longer b. higher c. shorter2) a. lower b. Longer c. shorter The number to attended art museum symphony concert rock concerts in events of 1990 compared to the number of words in the same events this year will graph do you use At a certain school, 72% of the students play one or more sports. the percentage of students who play one or more sports and who graduate is 67%. find the probability that a student graduates given that the student plays one or more sports. 5 - eso pas create sentences using the elements provided and impersonal constructions with se. use the preterite tense of the verbs. october 15 11:59 pm 3 attempts remaining grade settings 264-265 grammar presentation tutorial modelo (a raquel) / olvidar / comer antes de salir se le olvid comer antes de salir. (a tu hermana) / perder / las llaves del auto The individual most likely to have grown up with permissive parents is _____. Jasmine is 5 years younger than twice her sisters age. If Jasmines sister is 22 years old. Then, how old is jasmine C= 2pir solve for rPlease help me with this circle theorem - easy work How can u tell Whether 1080 is cube number What evidence would you look for to see if a chemical reaction has occurred? Steam Workshop Downloader