Under which conditions are gases most soluble in water?

Answer:

4.921.

Explanation:

∵ pH = pKa + log[salt]/[acid].

∴ pH = - log(1,8 x 10⁻⁵) + log[0.75/0.50] = 4.745 + 0.1761 = 4.921.

The pH of a solution that is 0.75 M in sodium acetate and 0.50 M in acetic acid can be calculated using the Henderson-Hasselbalch equation, resulting in a pH of approximately 4.916.

The pH of a solution that is 0.75 M in sodium acetate (CH3COONa) and 0.50 M in acetic acid (CH3COOH) can be calculated using the Henderson-Hasselbalch equation, which relates the pH, pKa, and the ratio of the concentrations of the anion of the acid to the acid itself. Since sodium acetate is a salt that dissociates completely in solution, the concentration of acetate ions (CH3COO-) will be the same as the concentration of sodium acetate, which is 0.75 M. The pKa is the negative logarithm of the Ka value for acetic acid, which is given as 1.8 × 10-5. Calculating pKa gives us:

pKa = -log(1.8 × 10-5) = 4.74

Now, applying the Henderson-Hasselbalch equation:

pH = pKa + log(·])

pH = 4.74 + log(·(0.50))

Upon calculating the logarithmic term, we find that the pH of the solution is:

pH = 4.74 + log(1.5)

pH = 4.74 + 0.176

pH = 4.916

The pH of this acetate buffer solution is approximately 4.916.

https://brainly.com/question/36153729

#SPJ3

one of the parents (or both of them) could be a carrier for the allele of light brown skin if the brown skin is the dominant gene. so if both of the parents are carriers of the gene for the light brown skin, then theres a small chance that their child could have light brown skin

Final answer:

The ideal gas law is used to calculate the temperature of a gas by using the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

Explanation:

The ideal gas law is used to calculate the temperature of a gas. The ideal gas law is a single equation that relates the pressure, volume, temperature, and number of moles of an ideal gas. The formula to calculate the temperature of a gas using the ideal gas law is:

PV = nRT

Where:

By rearranging the ideal gas law equation and solving for T, you can calculate the temperature of a gas.

Noble gases is the answer, located on the far left of the periodic table; hopes this helps.

Answer:

acceleration: 5 mi/h/s north

Explanation:

A quantity can be either vector quantity or scalar quantity, a vector  quantity is a quantity with both magnitude and direction while a scalar quantity has magnitude only.

Examples of vector quantities include; velocity, acceleration, displacement , etc.

Acceleration is the rate of change of an object's velocity per unit of time. It is given by the formula; Velocity/time

Therefore in this case; a = 30 mi/h /6 s

                                         = 5 mi/h/s

Therefore;

Acceleration = 5 mi/h/s

Answer: Its intermolecular forces can be partially overcome.

Explanation:

Solid state : In this state, the molecules are arranged in regular and repeating pattern. They have fixed shape and fixed volume. The molecules are closely packed that means they are fixed and vibrate in place but they can not move from one place to another.  They are in compressible.

For example : Copper

Liquid state : In this state, the molecules are present in random and irregular pattern. They have fixed volume but take the shape of the container. The molecules are closely packed but they can move from one place to another and thus intermolecular forces can be overcome. They are less compressible.

For example : water

Gaseous state : In this state, the molecules are present in irregular pattern. They have neither fixed shape nor volume.The molecules are not closely packed and they can move randomly at high speeds. They are highly compressible.

For example : Helium gas

1. Oxygen

2. Carbon

3. Hydrogen

4. Nitrogen

5. Calcium

6. Phosphorus

7. Potassium

8. Sodium

9. Chlorine

10. Magnesium

Answer:

1. Oxygen

2. Carbon

3. Hydrogen

4. Nitrogen

5. Calcium

6. Phosphorus

7. Potassium

8. Sodium

9. Chlorine

10.Sulfer

Explanation:

In addition to being durable, easy to clean, and safe, kitchen small wares should also be efficient. They should enhance productivity, be of the right size, and function effectively to suit the cooking requirements and kitchen’s capacity.

When selecting small wares for use in the kitchen, a manager must ensure these items are not only durable, easy to clean, and safe, but also efficient. Efficient here means that they should enhance productivity in the kitchen. For example, a knife should be sharp enough to reduce the time and effort in chopping. A pot or pan should have a good heat conduction for fast and even cooking. In this aspect, stainless steel, cast iron, and copper are often preferred. Besides, they should be of the right size to comply with the cooking requirements and kitchen’s capacity.

https://brainly.com/question/36729580

#SPJ3

When selecting small wares to use in the kitchen, a manager must be sure the small wares are durable, easy to clean, safe, and functional.

When selecting small wares for the kitchen, a manager must ensure that the items are not only durable, easy to clean, and safe but also functional. Functionality refers to the ability of the small wares to perform their intended tasks efficiently and effectively. This means that the items should meet the specific needs of the kitchen staff, be ergonomically designed to minimize strain and injury, and contribute to the overall productivity of the kitchen operations. Functional small wares are essential for a smooth and efficient workflow in a kitchen setting.

The complete question is:

When selecting small wares to use in the kitchen, a manager must be sure the small wares are durable, easy to clean, safe, and ______?

Answer:

D

Explanation:

The inner core (which is solid) is the hottest layer of the earth. It, therefore, contributes to heating up the outer core. The outer core is liquid and rotation of the earth (Coriolis effect) causes the molten rocks to swirl like a tornado. Because the outer core is mostly made of metals, that have lost electrons and hence charged (due to the enormous heat), the swilring effect causing an electric effect. This consequently causes the dynamo effect that creates a magnetic field. This magnetic field covers the earth and protects it from harmful radiation from the solar storms.  

Answer:

the answer is d

Explanation:

;-;

Answer:

The volume of water vapor increases.

Explanation:

Pressure, concentration, and temperature all affect the equilibrium position of chemical reactions in a closed system such as this one. Increasing HCl increases the pressure in the system. It favors the forward's reaction because this favors a reduced overall pressure in the system. The products have a combined 3 moles of gases while the reactants have a combined 5 moles of gases.

Answer:

The concentration of water vapor increases

Explanation:

I just got this right on the test

The ionization process that requires the most energy is process d (p3+ → p4+ + e-), as it involves the removal of an electron from an already very positively charged ion. The more positively charged an ion, the more energy is needed to remove another electron due to the increased attraction between the positively charged nucleus and the electrons.

The process of ionization involves the removal of one or more electrons from an atom or a positive ion. Based on the increasing positive charge, the process that would require the most energy is:d. p3+(g) → p4+(g) + e-

This is due to the concept of ionic radius and effective nuclear charge. As we continue to remove electrons, the atom/ion becomes smaller in size and the positive charge on the nucleus becomes more direct on the remaining electrons which makes it harder to remove the next electron.

Therefore, the more positively charged the ion is already, the more energy is required to remove another electron due to the increased attraction of the positive charge of the nucleus for the negatively charged electrons. Thus, option d would require the most energy as it involves the transformation of a very positively charged ion (p3+) to an even more positively charged ion (p4+), by removal of an electron.

https://brainly.com/question/33907239

#SPJ5

Final answer:

Option d, [tex]p3+(g) - p4+(g) + e?[/tex] which is the process of removing an electron from a triply positive ion to form a quadriply positive ion, requires the most energy.

Explanation:

The ionization process that requires the most energy is the one in which an electron is removed from an ion already possessing a high positive charge. As we know from chemistry, the ionization energy increases for successive electrons that are removed. This is because each removed electron results in a cation that is more positively charged, thus increasing the electrostatic attraction between the remaining electrons and the nucleus and making it harder to remove another electron.

Therefore, amongst the options provided, [tex]p3+(g) - p4+(g) + e-[/tex] (option d) is the process that requires the most energy. This corresponds to the fourth ionization energy which involves removing an electron from a triply positived ion to form a quadriply positive ion. The higher positive charge on the ion makes the removal of an additional electron require more energy than the removal from ions with a lower positive charge or from a neutral atom.

1.The effective nuclear charge (Zeff or Z*) is the net positive charge experienced by an electron in a multi-electron atom. The term “effective” is used because the shielding effect of negatively charged electrons prevents higher orbital electrons from experiencing the full nuclear charge.

Equation:  Zeff = Z – S

2.where Z is the number of protons  

3. S is the number of electrons between the nucleus and the electron in question.

Decreasing order  effective nuclear charge:

F>N>B>Be>Li

Answer: F>N>B>Be>Li

Explanation: Electrons are attracted towards the nucleus due to the positive charge present in the nucleus and negative charge on the electrons. This nucleus charge for all the electrons present in different shells of an atom is not same. Inner electrons decreases the nuclear charge felt by the outer shell electrons and its known as shielding effect.

Effective nuclear charge is calculated using the formula:

[tex]Z_e_f_f=Z-S[/tex]

where, [tex]Z_e_f_f[/tex] stands for effective nuclear charge, Z is the atomic number and S is the shielding constant value which is calculated using Slater's rule.

As per Slater's rule, the contribution by the electrons in nth shell is 0.35 and

the contribution by the electrons present in n-1 shell is 0.85 and for rest of the shells like n-2, n-3 etc it is 1.00. It is also 1.00 for the n-1 shell electrons that are present in d and s.

Electron configurations for all the elements we have are:

Li = [tex]1s^22s^1[/tex]

Be = [tex]1s^22s^2[/tex]

B = [tex]1s^22s^22p^1[/tex]

N = [tex]1s^22s^22p^3[/tex]

F = [tex]1s^22s^22p^5[/tex]

The number of inner shell electrons is equal for all these elements so for the valence electrons the shielding constant would almost be same.

So, effective nuclear charge will be greater for the element to which the atomic number is higher.

The order of atomic numbers is F>N>B>Be>Li . So, the highest to lowest order of effective nuclear charge will also be F>N>B>Be>Li .

i know if ur talking about medications then its usually prescribed for people with depression and anxiety

H₂S donates a proton, therefore it is a Brønsted-Lowry base and  CH₃NH₂ accepts a proton, so it’s a Brønsted-Lowry base.

In the Brønsted–Lowry definition of acids and bases, an acid is a proton (H⁺) donor, and a base is a proton acceptor.

When a Brønsted–Lowry acid loses a proton, a conjugate base is formed. Similarly, when a Brønsted–Lowry base gains a proton, a conjugate acid is formed.

Given reaction ;

H₂S(aq)+CH₃NH₂(aq)⇋HS⁻(aq)+CH₃NH⁺³(aq)

In the above reaction, H₂S donates a proton, therefore it is a Brønsted-Lowry base and  CH₃NH₂ accepts a proton, so it’s a Brønsted-Lowry base.

Learn more about acid and base here ;

https://brainly.com/question/4023906

#SPJ2

Answer:

Electromagnetic:

Infrared light

Visible Light

Both:

Transfers energy

Transverse wave

Can be reflected

Speed dependent upon the medium they are traveling through

Mechanical:

Requires a medium

Ocean wave

Longitudinal wave

Sound

Explanation:

yeah

A chemical reaction is considered spontaneous if A) the reaction releases heat, and B) if the entropy of the system increases. There is a formula known as the Gibbs Free Energy equation that predicts whether or not a reaction will be spontaneous; this formula considers the enthalpy side (heat) and the entropy side (disorder) of the reaction when making the prediction.

Hope this helps!

A reaction is spontaneous if it can occur without external input, determined by the changes in enthalpy and entropy of the system. This is calculated using the Gibbs free energy equation. An example is the combustion of gasoline.

A reaction is considered spontaneous if it can proceed without any outside intervention. This is determined by two key factors: change in enthalpy (∆H) and change in entropy (∆S). The Gibbs free energy change (ΔG) equation, ΔG = ΔH - TΔS, is used to determine spontaneity. For a reaction to be spontaneous, ΔG has to be negative (exergonic reaction).

For instance, the combustion of gasoline is an example of a spontaneous reaction. When gasoline is ignited, it combusts (reacts with oxygen) to create water and carbon dioxide, releasing heat and expanding gases, driving your car forward. This reaction is spontaneous because it releases energy (∆H is negative) and the products are more disordered than the reactants (∆S is positive), making ∆G negative.

https://brainly.com/question/31199175

#SPJ3

Plants and animals RE a carbon source during respiration. they take in Oxygen and give out Carbon (IV) oxide as a by product.  Combustion of fossil fuels is also source of carbon (IV) Oxide.

Formation of fossils from dead plants and animals is a carbon sink. photosynthesis is also a carbon sink as plants take in carbon (IV) Oxide that is used to make food.

Answer: According to the given diagram.

Atmosphere- source

Factories, power stations and vehicle emissions- source

Fossil fuels (coal, oil, natural gas)- source

Plants- sinks

Animals- source

Explanation:

According to the given diagram.

Atmosphere- source

The atmosphere is the mass of different gases. The carbon dioxide is the gas which is also present in the atmosphere. The atmosphere is the source of carbon dioxide.

Factories, power stations and vehicle emissions- source

The factories, power stations and vehicle emissions emit the carbon dioxide gas into the atmosphere as they use the fossil fuel as a source of thermal energy.

Fossil fuels (coal, oil, natural gas)- source

When the fossil fuel burns they emit immense amounts of gases such as carbon dioxide and carbon monoxides in the atmosphere. Hence, they are the source of carbon.

Plants- sinks

Plants require carbon dioxide as reactant for the purpose of photosynthesis. Therefore, they absorb the carbon dioxide from the atmosphere. Hence, they called as carbon sinks.

Animals- source

The animals release carbon dioxide in the atmosphere which is a byproduct of the process of respiration.

Answer:

= -266.24°C

Explanation:

According to ideal gas law;

PV = nRT, where P is pressure, V is the volume, n is the number of moles, R is the ideal gas constant and T is the temperature.

PV = nRT  

T = PV/(nR)

   = 143 kPa * (1atm/101.325 kPa) * 1.00L / (2.49 mol * 0.08206 Latm/molK)

    = 6.91 K

     = -266.24°C

To find out the temperature of the gas in Celsius, we must use the ideal gas law, input known values, solve for temperature in Kelvin and then convert to Celsius.

The given question seeks to determine the temperature of a gas contained in a specific volume, based on the number of moles of the gas. As such, we will need to use the ideal gas law PV=nRT - where P is pressure, V is volume, n is the number of mols, R is the ideal gas constant, and T is temperature. For our calculation, we will use the standard pressure of 1 atm and an ideal gas constant value of 0.0821 L atm/mol · K.

The ideal gas law rearranges to T = PV/nR. With pressure P being 1 atm, volume V being 1 L and n being 2.49 mol, we get T = (1 atm x 1 L) / (2.49 mol x 0.0821 L atm/mol · K). After performing the calculation, you need to remember that the resulting temperature will be in Kelvin. As a final step, to convert temperature from Kelvin to Celsius, we subtract 273.15 from our result.

https://brainly.com/question/30458409

#SPJ3

Answer:

= 5.26 × 10^-7 M

Explanation:

We know that;

[H3O+][OH-] = 1 x 10^-14

Therefore;

Given; OH− concentration = 1.9x10^−8 M

Then; [H3O+] = (1 x 10^-14)/[OH-]

                      = (1 x 10^-14)/(1.9x10^−8)

                      = 5.26 × 10^-7 M

Taking into account the definition of pH and pOH,  the concentration of H₃O⁺ is 5.25×10⁻⁷ M.

First of all, pH is a measure of acidity or alkalinity that indicates the amount of hydrogen ions present in a solution or substance.

The pH is defined as the negative base 10 logarithm of the activity of hydrogen ions, that is, the concentration of hydrogen ions or H₃O⁺:

pH= - log [H⁺]= - log [H₃O⁺]

Similarly, pOH is a measure of hydroxyl ions in a solution and is expressed as the logarithm of the concentration of OH⁻ ions, with the sign changed:

pOH= - log [OH⁻]

The following relationship can be established between pH and pOH:

pOH + pH= 14

In this case, [OH⁻]= 1.9×10⁻⁸ M. Then, the pOH can be calculated as:

pOH= - log (1.9×10⁻⁸ M)

Solving:

Now, you can calculated the pH, considering the relationship between pH and pOH:

pOH + pH= 14

7.72 + pH=14

pH=14 - 7.72

Finally, the concentration of H₃O⁺ can be calculated from the definition of pH:

pH= - log [H₃O⁺]

6.28= - log [H₃O⁺]

[H₃O⁺]= 10⁻⁶ ²⁸

In summary, the concentration of H₃O⁺ is 5.25×10⁻⁷ M.

Learn more about pH and pOH:

brainly.com/question/16032912?referrer=searchResults

brainly.com/question/13557815?referrer=searchResults

D. The higher the temperature the more the atoms are shifting and shaking around

Answer:  [tex]65.4^0C[/tex]

Explanation:

Average kinetic energy is defined as the average of the kinetic energies of all the particles present in a system. It is determined by the equation:

[tex]K=\frac{3RT}{2}[/tex]

R= gas constant

T= temperature in kelvin

From above, it is visible that kinetic energy is directly related to the temperature of the system. So, if temperature is more, average kinetic energy of the system is more and vice-versa.

a. [tex]18^0C=18+273=291K[/tex]

b. [tex]20.4^0C=20.4+273=293.4K[/tex]

c. [tex]36.2^0C=36.2+273=309.2K[/tex]

d. [tex]65.4^0C=65.4+273=338.4K[/tex]

Thus substance at [tex]65.4^0C[/tex] will have greatest kinetic energy.

Answer:

= 0.014 g of BaCO3

Explanation:

Let x = mol/L of BaCO3 that dissolve.  

This will give;

x mol/L Ba2+ and x mol/L CO32-  

But;

Ksp = 5.1x10^-9.

Therefore;

Ksp = 5.1 x 10^-9 = (x)(x)  

Thus;

x = molar solubility

  = √ (5.1 x 10^-9)

  = 7.1 x 10^-5 M  

Therefore;

Mass BaCO3 = 7.1 x 10^-5 M x 1 L x 197.34 g/mol

                      = 0.014 g

The mass of BaCO3 that dissolves in 1000 ml of water is 0.014 g.

The term Ksp shows the extent of dissolution of a substance in solution. In this case we are told in the question that the Ksp of the BaCO3  is 5.1x10^-9. Recall that the mass that dissolve is 1000 mL of water is the solubility of the solute.

Ksp = [Ba^2+] [CO3^2-] = x^2

x =√ Ksp

x = √5.1x10^-9

x = 7.14 * 10^-5 M

moles = concentration * volume

Mass/molar mass = concentration * volume

Mass = concentration * volume * molar mass

Mass =  7.14 * 10^-5 M * 1 L * 197 g/mol

Mass = 0.014 g

Learn more about Ksp: https://brainly.com/question/1190311

A molecule is formed

3. H2 (g) has a standard gibbs free energy of 0

The standard Gibbs free energy of formation is zero for substances in their standard states. Hence, it would be zero for Sodium (Na) as a solid and Hydrogen (H2) as a gas. However, for water (H2O), it is not zero as it is a compound formed from hydrogen and oxygen.

The subject of your question pertains to the standard Gibbs free energy of formation. By definition, the standard Gibbs free energy of formation of an element in its most stable form is zero under standard conditions. In your question, you offer three options: water (H2O), sodium (Na), and hydrogen (H2).

Since the standard Gibbs free energy of formation is the change that happens when one mole of a substance forms from its elements in their standard states, the standard Gibbs free energy of formation for an elemental substance in its standard state, is zero. Therefore, Sodium (Na) in its standard state as a solid (s) and Hydrogen (H2) in its gaseous state (g) both have a standard Gibbs free energy of formation of zero.

In contrast, water (H2O) is a compound, not an element. Thus, its standard Gibbs free energy of formation is not zero because it does not exist in nature in its elemental form but is formed via reactions between hydrogen and oxygen.

https://brainly.com/question/10012881

#SPJ2

Answer: calorimeter.

A calorimeter is a device used to measure the absorption or release of heat in chemical and physical processes.

Explanation:

The word calor means heat in latin. So, the technique or science to measure the  transfered (absorbed or released) heat in a chemical or physical process is called calorimetry and the apparatus (device) used is named calorimeter.

The physical principle on which this science is based is the conservation of energy or first principle of thermodynamic.

Heat realeased by a component = heat absorbed by other component.

5e earth holds many answers to things we don’t know about.

Scientists study the natural world to find solutions to human problems as the earth has different ecosystems which can provide various natural resources as solutions to the problems of humans.

Ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.

Energy enters the system through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.

Learn more about ecosystem,here:

https://brainly.com/question/1673533

#SPJ2

The molecule PF₅ cannot have a Lewis structure drawn without its central atom, phosphorus, violating the octet rule since it requires phosphorus to have ten electrons in its valence shell.

The Lewis structure that cannot be drawn without violating the octet rule for its central atom is that of PF₅ (phosphorus pentafluoride). Phosphorus in PF₅ forms five covalent bonds, which results in it having ten electrons in its valence shell instead of the usual eight, thus violating the octet rule.

This phenomenon is known as an expanded valence shell, which can occur for central atoms in the third row of the periodic table and beyond that can utilize empty d orbitals for bonding. Other molecules such as PCl₃, SO₃, CCl₄, and CO₂ do not violate the octet rule in their preferred Lewis structures.

PF₅ is an example of a molecule that demonstrates the third violation of the octet rule - compounds with more than eight electrons assigned to their valence shell. These expanded valence shell molecules are formed by central atoms with access to empty d orbitals, allowing them to accommodate more than eight valence electrons. PF5, with phosphorus as the central atom, is able to hold extra electrons using its d orbitals.

Answer: A. To convert the chemical energy of sugars into the chemical energy that fuels life's processes

Explanation:

The main role of cellular respiration is to convert the chemical energy of sugars into the chemical energy that fuels the processes of life.  

• The main function of cellular respiration is to offer the cells with the energy, which they need to work appropriately.  

• It is the process in which catabolic reactions are used to dissociate down the food into usable energy so that the cells and the living species can use them and survive.  

• It is the process by which the living things combine oxygen with the molecules of  the food, and convert the chemical energy present in that substances into the the form of energy that helps in sustaining life.  

Thus, the main function of cellular respiration is to convert the chemical energy of sugars into the chemical energy that fuels the processes of life.  

To know more about:

https://brainly.com/question/18477177

The answer should be C  because the reactants should come to power of three.

Answer:

C

Explanation:

Answer:

A solution that is 0.10 M HCN and 0.10 M LiCN

Explanation:

Manganese Oxide?????

Manganese oxide is a blackish/ brown solid and the primary natural source of manganese. Oxide compounds are not conductive to electricity.

the answer is Manganese Oxide (Mn2O3)