Under which set of conditions will the ideal gas law give the best approximation for the properties of a real gas?

The concept illustrated in the question, "Do you own a dog?", is a control question. A control question is used to establish a baseline response for comparison.

The concept illustrated in the question, "Do you own a dog?", is a control question.

A control question is a type of question used to establish a baseline response for comparison. It is typically unrelated to the topic being discussed and is used to ensure the accuracy and reliability of the answers given.

In this example, asking someone if they own a dog would serve as a control question if the actual topic of conversation is something unrelated to dogs or pets.

The reaction of ammonia with α-ketoglutarate is catalyzed by glutamate dehydrogenase and requires NADH or NADHPH as a reactant.

The answer is D

Hope this helped

Answer:

If you only want to look at concerns then B would be the correct answer because that is a positive when using nuclear energy

Explanation:

C) Space exploration gives scientists important data they can use to determine the origin of the universe.

Answer:

C) Space exploration gives scientists important data they can use to determine the origin of the universe

Explanation:

Space is being explored from decades now in order to accumulate data that can provide us knowledge about origin of universe and, moreover it may help us finding some different natural resources which are not present on earth. Voyager 1 and 2 are such huge milestone in providing data that is being used for our concerns.

Answer:

D. The process in which a substance gains energy

Explanation:

An endothermic reaction is a reaction in which heat energy is absorbed from the surroundings therefore we can imply that in such reaction, the substances gains energy. In endothermic reactions, the surrounding becomes colder at the end of the changes.

Here, the heat energy level of the final state is higher than that of the initial state. Most dissolution reactions are endothermic in nature. Examples are dissolution of Sodium chloride in water.

Note: it is in exothermic reaction that heat energy is liberated to the surrounding

Answer:

D. The process in which a substance gains energy

Explanation:

Answer:

All samples of a given chemical compound will be composed of the same elements in the same proportion.

Explanation:

The law of constant composition or definite proportions states that "all pure samples of the same chemical compound contain the same proportions of the elements by mass". For example, every time water H₂O forms, it would always  have the same proportion of hydrogen and oxygen.

The law of constant composition states that all samples of a given chemical compound will have the same elements in the same proportion by mass. This law helps in understanding chemical reactions and stoichiometry.

The law of constant composition (also known as the law of definite proportions) states that all samples of a given chemical compound will be composed of the same elements in the same proportion by mass. This means that regardless of the size or source of the compound, the ratio of the elements in the compound will always be the same.

For example, if we take water (H2O) as a compound, it will always have two hydrogen atoms for every oxygen atom. This ratio of 2:1 is the same for any sample of water. This law highlights the fundamental principle that the composition of a compound is fixed and predictable, and it forms the basis for understanding chemical reactions and stoichiometry.

https://brainly.com/question/12768510

#SPJ6

Answer:

[tex]\boxed{\text{1.81 da}}[/tex]

Explanation:

1. Calculate the decay constant

The integrated rate law for radioactive decay is 1

[tex]\ln\dfrac{A_{0}}{A_{t}} = kt[/tex]

where

A₀ and A_t are the counts at t = 0 and t

k is the radioactive decay constant

[tex]\ln \dfrac{846}{269} = k \times 3.00\\\\\ln3.145 = 3.00k\\1.146 = 3.00k\\\\k =\dfrac{1.146}{3}\\\\k = \text{0.382 /da}\\[/tex]

2. Calculate the half-life

[tex]t_{\frac{1}{2}} = \dfrac{\ln2}{k} = \dfrac{\ln2}{0.382} = \text{1.81 da}[/tex]

The half-life for decay is [tex]\boxed{\textbf{1.81 da}}[/tex].

There are 79.7 moles of tungsten atoms in 4.8 x 10^25 tungsten atoms, calculated by dividing the total number of atoms by Avogadro's number (6.022 x 10^23 atoms/mol).

To determine how many moles of tungsten atoms are in 4.8 x 10^25 atoms, we utilize Avogadro's number, which states that one mole of any substance contains 6.022 x 10^23 representative particles (atoms, molecules, etc.). To perform the conversion, we divide the total number of tungsten atoms by Avogadro's number.

The calculation would be:
(4.8 x 10^25 atoms of W) / (6.022 x 10^23 atoms/mol) = 7.97 x 10^1 mol of W

Therefore, there are 79.7 moles of tungsten atoms in 4.8 x 10^25 atoms.

Approximately 80.0 moles of tungsten atoms are in 4.8 x10²⁵.

To find the number of moles of tungsten atoms in 4.8 × 10²⁵ atoms, we can use Avogadro's number. Avogadro's number is 6.022 × 10²³ atoms/mol, which tells us the number of atoms in one mole of a substance.

Step-by-Step Solution:

moles of tungsten = (4.8 × 10²⁵ atoms) / (6.022 × 10²³ atoms/mole)

Now, perform the division:

moles of tungsten = 4.8 / 6.022 × [tex]10^{(25 - 23)[/tex]

moles of tungsten = 0.797 × 10²

moles of tungsten ≈ 79.7

Therefore, there are approximately 80.0 moles of tungsten atoms in 4.8 × 10²⁵ atoms of tungsten.

The true statement for a solution when its concentration of hydronium ions increases then pH decreases.

pH of any solution is used to define the acidity, basicity or neutrality of the solution.

pH will be calculated as:

pH = -log[H⁺]

From the equation it is clear that concentration of hydronium ion increases, pH value decreases and acidity increases.

Hence, pH value decreases as hydronium ion increases.

To know more about pH, visit the below link:

https://brainly.com/question/172153

#SPJ2

Answer:

All of the above

Explanation:

Panthers, pumas, and mountain lions are all the same animal. Just different names. So, all of these would be correct.

Answer:

See below  

Explanation:

Each metal oxide reacts with HCl to form water and the metal chloride

[tex]\rm SrO + 2HCl \longrightarrow SrCl_{2} + H_{2}O\\\\Na_{2}O + 2HCl \longrightarrow 2NaCl + H_{2}O\\\\Li_{2}O + 2HCl \longrightarrow 2LiCl + H_{2}O\\\\BaO + 2HCl \longrightarrow BaCl_{2} + H_{2}O[/tex]

Answer:

Generally, metal oxides reacts with hydrochloric acid(HCl) to form the corresponding salts and water

SrO + 2HCl  → SrCl2 + H2O

Na2O + 2HCl  → 2NaCl + H2O

Li2O + 2HCl  → 2LiCl + H2O

BaO + 2HCl  → BaCl2 + H2O

Explanation:

Metal oxides are basic in nature .This means they have a high pH value ( >7 ). This is why if they react with acid  the product becomes salt and water. Now let us write a balance equation between the following metal oxides and Hydrochloric acid(HCl) as stated in the questions.

SrO + 2HCl  → SrCl2 + H2O

The above equation has the reactant at the left hand side and the products at the right hand side. Balancing the equation requires that the number of each element present on the reactant sides need to be equal on the product sides . Sr(strontium) has only one atom(SrO) and one atom of oxygen (SrO) on the reactant side. On the product side, Sr has one atom(SrCl) and one atom of oxygen(H2O). So Sr and O is balanced on both sides. The hydrogen on the product sides has 2 atom and the chlorine has 2 atom too . To balance the 2 atoms with that on the reactant side we add 2 in front of HCl  to make hydrogen 2 atoms and chlorine 2 atoms.

Na2O + 2HCl  → 2NaCl + H2O

Same method applied to balance the first equation is used here . Make sure every number of atom on the left side is equal to the right sides. The sodium is diatomic on the left and right sides. The oxygen has one atom on both sides .The hydrogen is diatomic on both sides  and chlorine is diatomic on both sides. so the equation is balanced.

Li2O + 2HCl  → 2LiCl + H2O

The equation is balance  here as I added 2 in front of HCl to balance hydrogen and chlorine on both sides. And add 2 in front of LiCl  to balance with the diatomic Chlorine and lithium on the reactant side.

BaO + 2HCl  → BaCl2 + H2O

I only added 2 to the HCl acid to balance it with what we have on the right sides.

It seems like the answer is C, you really just need to use the process of elimination.

Suspect A's ability to recount events in reverse order demonstrates reliance on the power of their memory. However, eyewitness confidence does not necessarily equate to memory accuracy due to potential suggestibility and memory distortion.

When Suspect A retells the events of a certain evening in the reverse order after confidently describing them one way, they are relying primarily on the power of their memory. This ability demonstrates that they have a concrete and detailed recollection of the events. Contrary to being an attempt to confuse the interrogator or a function of inexperience or a demonstration of lying ability, being able to retell events in reverse order suggests a strong and accurate memory. It is important to note, however, that eyewitnesses may be very confident in their recollections even when their memories are incorrect, which is a natural flaw in human cognition known as memory distortion. Furthermore, eyewitnesses can have their memories influenced by external factors, such as the suggestibility that can occur during police questioning.

Answer:

[tex]\boxed{-6.29 \times10^{5}\text{ J}}[/tex]

Explanation:

Step 1. Determine the cell potential

                                                     E°/V    

2×[Cr ⟶ Cr³⁺ + 3e⁻]                  0.744  V

3×[Cu²⁺ + 2e⁻ ⟶ Cu]               0.3419 V

2Cr + 3Cu²⁺ ⟶ 3Cu  + 2Cr³⁺    1.086  V

Step 2. Calculate ΔG°

[tex]\Delta G^{\circ} = -nFE_{\text{cell}}^{^{\circ}} = -6 \times 96 485 \times 1.086 = \text{-629 000 J}\\\\= \boxed{-6.29 \times10^{5}\text{ J}}[/tex]

The value of change in free energy of the given cell reaction is -6.2×10⁵J.

Change in free energy for a cell will be calculated by using the below equation as:

ΔG° = -nFE°, where

2×[Cr ⟶ Cr³⁺ + 3e⁻]              

3×[Cu²⁺ + 2e⁻ ⟶ Cu]            

Overall reaction will be

2Cr + 3Cu²⁺ ⟶ 3Cu  + 2Cr³⁺

So number of electrons involved are 6.

On putting all these values on the above equation, we get

ΔG° = -(6)(96485)(1.08) = -625,222.8J = -6.2×10⁵J

Hence required value of ΔG° for the cell is -6.2×10⁵J.

To now more about electrode potential, visit the below link:

https://brainly.com/question/8655719

#SPJ2

Answer:

its d 3.9 not c

Explanation:

To find the maximum amount of magnesium oxide produced during the reaction, we need to determine the limiting reactant and calculate the moles of magnesium oxide produced. Using the mole ratio and converting grams to moles, we find that the maximum amount is 3.99 grams.

To determine the maximum amount of magnesium oxide that can be produced during the reaction, we need to find the limiting reactant. First, we convert the given masses of magnesium and oxygen to moles using their respective molar masses. The balanced chemical equation tells us that the mole ratio of magnesium to magnesium oxide is 1:1, so the number of moles of magnesium is equal to the number of moles of magnesium oxide. Lastly, we convert the moles of magnesium oxide to grams using its molar mass to find the maximum amount of magnesium oxide that can be produced.

Therefore, the maximum amount of magnesium oxide that can be produced during the reaction is 3.99 grams.

https://brainly.com/question/35167818

#SPJ3

Answer:

Explanation:

The Lewis electron diagram is a representation of the atoms that shows the the valence electrons present in the atom.

The Lewis electron diagram uses the chemical symbol of the element and adds one dot for every valence electron. The dots (valence electrons) are placed around the chemical symbol.

So, for phosphorues:

So you get the picture attached, with the chemical symbol P at the center, surroundeb by 5 dots: two dots above, one dot to the left, one dot to the right, and one dot below the chemical symbol.

Please, click on the image if you want to see it separately

The Lewis electron dot diagram for phosphorus shows five dots arranged around the elemental symbol 'P', indicating the five valence electrons.

The student has asked for the Lewis electron dot diagram for phosphorus based on its electron configuration, which is 1s²2s²2p⁶3s²3p³. Phosphorus has a total of 15 electrons with the valence electrons being the most important for the Lewis structure. Considering the electron configuration, phosphorus has 5 valence electrons (in the 3s and 3p subshells). The Lewis dot diagram represents these 5 valence electrons as dots surrounding the symbol for phosphorus (P):

P : . .
  .
  .

4.73 mol (OPTION C)

In order to find the moles of Li produced by the reaction, we have to work from the known information (moles of barium), make a connection between the two species (mole ratio between barium and lithium), then we can calculate determine the moles of Lithium.

Balanced Equation:  2LiBr  +  Ba   →   BaBr₂  +  2Li

                       moles = mass ÷ molar mass

Since the mass of barium is 325 g and its molar mass is 137 g/mol,

then the moles of barium = 325 g ÷ 137 g/mol

                                          = 2.37 mol

Now to find the number of moles of Lithium,  compare the mole ratio of Barium to Lithium based on the stoichiometric values of the balance equation:

      mole ratio of Ba : Li is 1 : 2

    ∴ for every moles of barium in the reaction, there are two moles of Lithium produced

⇒ if moles of Ba = 2.37 moles

then moles of Li = 2.37 moles × 2 moles

                           =  4.74 moles (OPTION C)                                  

4.73 mol of lithium (Li) are produced

#platofam

Answer:

One mole of H₂S contains 2 atoms of hydrogen

Explanation:

In one mole of NaOH : 1 atom of Na and 1 atom of O and 1 atom of H

    one mole of H₂S   :  2 atoms of H and 1 atom of S

     one mole of NH₃  : 1 atom of N and 3 atoms of H

     One mole of CH₄ : 1 atom of C and 4 atoms of H

Cations, or positive ions, are smaller than their parent atoms because they have fewer electrons resulting in less electron-electron repulsion. Anions, or negative ions, are larger than their parent atoms because additional electrons increase electron-electron repulsion.

The true statement in the choices given is: 'Cations are smaller than their neutral parent atoms because there are fewer electrons "competing" for the attractive force of the protons in the nucleus'.

When an atom forms a cation, or a positive ion, it loses one or more electrons from its valence shell. This reduction in the number of electrons minimizes the electron-electron repulsion and allows the protons in the nucleus to pull the remaining electrons closer, making the radius of the cation smaller than the parent atom. For example, an aluminium atom has a larger radius than an aluminium cation because the cation has fewer electrons, hence the remaining electrons are pulled closer to the nucleus.

On the other hand, anions form when a neutral atom gains one or more electrons in its valence shell. The added electrons increase repulsion among the electrons, causing the radius of an anion to be larger than that of its parent atom. For example, a sulfur atom has a smaller radius than a sulfide anion because the anion has more electrons, thus they spread out more due to increased electron-electron repulsion.

https://brainly.com/question/30663970

#SPJ12

The correct statement is that cations are smaller than their neutral parent atoms because there are less electrons competing for the attractive force of the protons in the nucleus. Conversely, anions are larger than their neutral parent atoms due to more electrons competing for the attractive force of the protons.

The correct statement is: Cations are smaller than their neutral parent atoms because there are fewer electrons “competing” for the attractive force of the protons in the nucleus. A cation is a positively charged ion that is formed when a neutral atom loses one or more electrons from its valence shell. This loss of electrons results in a smaller atomic radius because there are fewer electrons 'competing' for the attractive force of the protons, allowing the atom to pull the remaining electrons closer to the nucleus.

Conversely, an anion is a negative ion that is formed when a neutral atom gains one or more electrons. This results in a greater repulsion among the electrons, which results in an increase in atomic radius. Hence, anions are larger than their neutral parent atoms because there are more electrons “competing” for the attractive force of the protons in the nucleus.

https://brainly.com/question/30328384

#SPJ12

Answer:

[tex]\boxed{\text{True; False; True}}[/tex]

Explanation:

Catalysts lower activation energy. TRUE.  

They provide an alternate pathway with a lower activation energy.

Catalysts are consumed by the overall reaction. FALSE.

They take part in the reaction, but they can be recovered unchanged at the end.

Catalysts speed up the chemical reactions. TRUE.

If the activation energy is lowered, a greater percentage of the molecules will have enough energy to get over the energy barrier.

Its like lowering the high-bar in a track and field meet. The lower the bar, the more athletes will be able to get over it.

An indicator in a titration indicates when the reaction has reached its equivalence point by undergoing a noticeable color change. This color change marks the end point of the titration, providing an estimate for more accurate calculations of analyte concentration.

The function of an indicator in a titration is to show when a reaction has reached its equivalence point, which is typically determined by a noticeable change in the color of the solution. Indicators like methyl orange, litmus, or phenolphthalein are substances that change color at or near the equivalence point of the titration. These color changes, which are sensitive to the pH level of the solution, mark the end point of the titration, allowing for accurate measurements and calculations of analyte concentration.

For instance, in a strong acid titration, the solution pH hits the lower limit of the methyl orange color change interval after the required amount of titrant has been added, thus changing the initial red solution to appear orange. On reaching the equivalence point, the solution turns yellow, suggesting the endpoint of the titration. Similarly, phenolphthalein goes colorless to pink around the equivalence point, helping to identify when the titration has been completed.

https://brainly.com/question/31783897

#SPJ6

The function of an indicator in a titration is to signal the end point of the reaction, which ideally corresponds to the equivalence point.

In titration, an indicator is a substance that changes color at a specific pH level, which is chosen to match the completion of the chemical reaction being studied. The equivalence point is the point at which the amount of titrant added is stoichiometrically equivalent to the amount of analyte in the solution. Since the equivalence point cannot be observed directly, an indicator is used to mark the end point, which is a visible change that occurs at or very near the equivalence point.

 The choice of indicator is crucial and depends on the nature of the titration. For acid-base titrations, indicators are selected based on their pKa values, which should be close to the pH at the equivalence point. For example, phenolphthalein is commonly used for strong acid-strong base titrations because it changes color in the pH range of 8.2 to 10.0, which is suitable for such reactions.

 The accuracy of the titration can be affected by the choice of indicator. If the pKa of the indicator is not close enough to the pH of the equivalence point, the end point and equivalence point may not coincide, leading to a titration error. Therefore, a good indicator should have a sharp color change within a narrow pH range that brackets the expected pH at the equivalence point.

In summary, the function of an indicator in titration is to provide a clear, observable change that indicates when the equivalence point has been reached, allowing for the precise determination of the concentration of the analyte.

Answer:

Kindly find the attached image.

Explanation:

Reactants, intermediate, products, activation energy (Ea), and enthalpy change (ΔH).

ΔH = E of products - E of reactants.

Answer: Arrow E represents the enthalpy of the reaction.

Explanation:

Enthalpy of the reaction is defined as the difference in the potential energy of the products and the reactants. It is represented as [tex]\Delta H_{rxn}[/tex]

[tex]\Delta H_{rxn}=H_{products}-H_{reactants}[/tex]

From the image, the points marked represents:

Point A represents the potential energy of the reactants.

Point B represents the intermediate state or transition state in a reaction.

Point C represents the potential energy of the products.

Arrow D represents the activation energy of the reaction.

Arrow E represents the enthalpy of the reaction.

Hence, arrow E represents the enthalpy of the reaction.

Answer:

Explanation:

You need the conversion factor to convert the value of 12.33 kPa to milimiters of mercury, mmHg.

The converstion factors are looked at tables, which today you can find in internet.

Since the conversions between kPa and atm and between atm and mmHg are more widely known, I will show the conversion using those relations:

⇒ 101.325 kPa = 760 mmHg

Then, dividing both sides by 101.325 kPa you get the conversion factor:

Now, multiply 12.33 kPa by that conversion factor:

Final answer:

The vapor pressure of water at 50.0°C, which is 12.33 kPa, when converted to millimeters of mercury, is approximately 92.906 mmHg.

Explanation:

The vapor pressure of water at 50.0°C is given as 12.33 kPa. To convert this to millimeters of mercury (mmHg), we can use the conversion factor that 1 atm is equivalent to 101.325 kPa and also to 760 mmHg. Therefore, to convert kPa to mmHg, we multiply the pressure in kPa by the ratio of these two constants:

12.33 kPa * (760 mmHg / 101.325 kPa) = 92.906 mmHg (rounded to three significant figures).

Thus, the vapor pressure of water at 50.0°C is approximately 92.906 mmHg.

Because only those with logic (problem solving capabilities) go to chemistry.

Chemists are great for solving problems due to their analytical skills and systematic approach to research.

They have a deep understanding of chemical properties and reactions, which allows them to develop solutions to complex issues. Their training in laboratory techniques equips them to design and conduct experiments effectively.

Chemists can identify and isolate variables, making it easier to pinpoint the root cause of a problem. They also excel in data analysis, interpreting results to draw meaningful conclusions.

Their ability to think critically and creatively helps them devise innovative solutions. Furthermore, chemists are skilled in collaborating with other scientists and professionals, bringing a multidisciplinary approach to problem-solving.

This combination of skills and knowledge makes chemists highly effective in addressing and resolving a wide range of challenges.

Answer:

w gang alright

Explanation:

ay its b alright

Answer:

C is the right one

Explanation:

That dude is bugging that said B

Answer:

See below  

Explanation:

[tex]\rm HCOOH + H_{2}O \rightleftharpoons H_{3}O^{+} + HCOO^{-}[/tex]

The general formula for an equilibrium constant expression is

[tex]K_{eq} = \dfrac{[\text{Products}]}{[\text{Reactants}]}[/tex]

For this reaction,  

[tex]K_{eq} = \dfrac{[\text{HCOO}^{-}][\text{H}_{3}\text{O}^{+}]}{[\text{HCOOH}]}[/tex]

Answer:

bromine (Br) and mercury (Hg

Explanation:

Although, elements caesium (Cs), rubidium (Rb), Francium (Fr) and Gallium (Ga) become liquid at or just above room temperature. Mercury doesn't conduct heat or electricity as well as other members of its group. Most metals are solids at room temperature because they share their valence electrons with surrounding metal atoms. However Mercury hangs onto its 6 valence electrons tighter than any other atom.

Answer:

Explanation:

Taking 25°C as the room temperature, there are only two elements that are remarkably  liquid at room temperature; they are bromine, Br, (a nonmetal) and mercury, Hg,  (a metal).

It is very surprisingly: the other 116 elements are either solid or gaseous at room temperature.

Nevertheless, a few degrees above 25° other elements will be liquid.

This is the case of:

This information, of course, is found in tables which are available in internet and some textbooks.

The process of fermentation in winemaking turns grape juice into an alcoholic beverage. During fermentation, yeasts transform sugars present in the juice into ethanol and carbon dioxide (as a by-product).

Fermentation is the process by which yeast, particularly Saccharomyces cerevisiae, converts the sugars in grapes into alcohol (ethanol) and carbon dioxide. The chemical equation for this conversion is C₆H₁₂O₆ → 2CO₂ + 2C₂H₅OH +energy. Wine fermentation tanks have valves to release the CO₂ by product.

The conversion of sugar in grapes into alcohol is done through a biological process called fermentation. During fermentation, yeast, specifically a type called Saccharomyces cerevisiae, plays a vital role. Yeasts consume the sugars in grapes, such as glucose, and convert them into alcohol (ethanol) and carbon dioxide as byproducts. The overall chemical reaction for producing ethanol from glucose during fermentation is represented as:

C₆H₁₂O₆ → 2CO₂ + 2C₂H₅OH + energy

In the winemaking process, the grape juice, or 'grape must', is inoculated with S. cerevisiae to initiate the fermentation. As the yeast metabolizes the sugar, ethanol is produced, which gives wine its alcoholic content. Fermentation tanks used to make wine have valves to release the carbon dioxide that is created as a byproduct of this process.

3.44x10^23 divided by 6.02x10^23 equals 0.571 mol Cu.

Final answer:

To find the number of moles equivalent to 3.44 × 10²³ atoms of copper, you divide the given number of atoms by Avogadro's number, resulting in approximately 0.571 moles of copper.

Explanation:

To calculate the number of moles of copper equivalent to 3.44 × 10²³ atoms of copper, we need to use Avogadro's number, which is approximately 6.02 × 10²³ atoms/mol. This is the number of atoms in one mole of any element.

Here is the step-by-step calculation:

Therefore, there are roughly 0.571 moles of copper in 3.44 × 10²³ copper atoms.

Answer:

4 atoms.

Explanation:

1 atom of C and 4 atoms F.

So, a molecule of carbon tetrafluoride contains 4 atoms of flourine.

your answer should be B. “The universe began as a small, dense ball of matter.”

mark me brainliest please