Sketches are the foundation for creating features in a CAD program, most SolidWorks features start with which sketch?
1.Original
2. 2D
3. 3D
4. Graphical
Technician A says centering cones are used on hub centric wheels. Technician B says centering cones are
used on lug centric wheels. Who is correct?
A. Technician A
B. Technician B
C. Both Technician A and Technician B
D. Neither Technician A nor Technician B
D. Neither Technician A nor Technician B is correct
What are the hub-centric wheels?Hub-centric wheels have a center bore that is the same size as the hub on the car. This means that the wheel will fit perfectly on the hub without any play. Centering cones are not needed for hub-centric wheels.
Lug-centric wheels have a center bore that is slightly smaller than the hub on the car. This means that the wheel will not fit perfectly on the hub without some play. Centering cones are used to center the wheel on the hub and prevent vibration.
Therefore, neither Technician A nor Technician B is correct. Centering cones are not used on hub-centric wheels, and they are only used on lug-centric wheels.
Option D is correct
Read more about wheels here:
https://brainly.com/question/21188089
#SPJ6
Explain 3 ways that people in sports use engineering to increase their performance?
Which of the following statements most accurately describes the circuit?
A.The Leonardo microcontroller will push 5V from pin 13
B. The resister drops the voltage from 5V to 3V so that the LED does not overheat
C.Electrons flow through the closed circuit causing the LED to light
D.All of the above
Answer:
D
Explanation:
All of the above.
Science, Technology, Engineering & Mathematics
Professionals in these careers strive to enhance the quality of life through innovations in technology, health sciences or information, the environment, and _________.
A. communication systems
B. needs of the people
A communication systems
1. Which of the following will cause a spark knock?
Answer:
I couldn't find options for your question online, but I can give you an explanation so you can choose the correct option.
Explanation:
A spark knock is a form of unpredictable behavior that occurs in combustion, that is, in the chemical reaction that occurs between oxygen and an oxidizable material. Such combustion is usually manifested by incandescence or flame.
The spark knock is a detonation that occurs when there is a lot of pressure in the fuel.
Some situations in which this can happen are:
Engine overloaded. Maximum pressure in the cylinders. Engine overheated. Overheated air. Long and excessive engine ignition timing. Spark plug at high temperatures.The controller can be considered the brain of closed loop system
Answer:
true?
Explanation:
Money managers:
Question 1 options:
help people set up budgets to control personal spending.
typically work for investment banks.
are on the "sell side" of Wall Street.
are on the "buy side" of Wall Street.
Answer:
Are on the "sell side" of Wall Street
Harmony in music is characterized by _____.
the horizontal relationship of pitches
only unpleasant sounds
the vertical relationship of pitches
only pleasant sounds
Answer:
the vertical relationship of pitches.
Explanation:
Harmony can be defined as the use of simultaneous pitches ( two or more tones and notes) or chords played at the same time together.
Harmony in music is characterized by the vertical relationship of pitches. The three most popular and essential forms of harmony are;
1. Diatonic harmony.
2. Non-diatonic harmony.
3. Atonal harmony.
Question:
1) The horizontal relationship of pitches
2) Only unpleasant sounds
3) The vertical relationship of pitches
4) Only pleasant sounds
Answer:
The correct option is;
3) The vertical relationship of pitches
Explanation:
Harmony, in music is the process whereby individual or sound superposition is evaluated by hearing, that is sounds consisting of frequencies, pitches etc. that occur simultaneously.
Therefore, harmony with regards to musicals considered as vertical because the tones and notes are simultaneously played for which therefore, they are written as vertical music notation.
Therefore, harmony in music is characterized by the vertical relationship of pitches.
What made computers different from machines that came before them?
Computers are intelligent machines that can make decisions on their own after digesting various data analyses, whereas machines are the least intelligent and constantly wait for user commands.
What make computers different from machines?The capacity for processing is what distinguishes computers from other types of machinery. Any device that is capable of carrying out all these functions will be regarded as a computer.
Since their invention decades ago, computers have considerably changed and advanced. Computers were incredibly big and slow in their most basic forms many years ago.
Computers have gradually gotten quicker and smaller, allowing people to utilize them almost anywhere.
Therefore, In contrast to the computers they replaced, which were people, computing machines were termed “machines” because they were machines.
Learn more about computers here:
https://brainly.com/question/22521344
#SPJ2
Computers are different from machines that came before them due to their processing speed and capacity, versatility, and programmability.
Explanation:Computers are different from the machines that came before them due to several key factors:
Processing speed and capacity: Computers are capable of processing information much faster and handling larger amounts of data compared to previous machines.Versatility: Computers can perform a wide range of tasks and are not limited to specific functions like earlier machines.Programmability: Unlike earlier machines, computers can be programmed to execute specific instructions, making them more flexible in their functionality.These advancements have greatly influenced various fields such as science, business, and communication, among others.
Learn more about Computers here:https://brainly.com/question/32297640
#SPJ3
Read this excerpt from a black hole is not a hole what is the passage describing
A: light in space
B:a star
C: a flashlight
D: Fog on earth
HURRY HURRY
Answer:
B
Explanation:
B
Which of the following is an example of a reliable source?
A. A pamphlet on the economics of bridge building published by the organization
Citizens Against Government Spending.
B. An article in Environmental Science and Technology, a peer-reviewed journal
published by the American Chemical Society.
C. A newspaper editorial written by a United States senator.
D. A blog post by a university engineering student.
Answer:
A
Explanation:
A pamphlet on the economics of bridge building published by the organization citizens against government spending.
Which of the following activities will allow an engineer to determine that a building's design is sound?
O determining a feasible floor plan
assembling an expert team
O conducting structural calculations
O following OSHA safety rules
Answer:
determining a feasible floor plan assembling an expert team
Explanation:
Because you can hear through the floor
What historical event allowed both aerospace fields to make enormous strides
forward? *
Answer:
The world wars. Most notably world War II
Explanation:
The demand for aircrafts during these events led to extensive research into the design of aircrafts. Aircraft advanced within these years from a simple design to a more complex design; capable of carrying fire power and even became bomb equipped. Also, the material of choice of production moved from wood to metal and the engine was improved on to gain more speed and maneuverability.
If you are involved in a collision and your vehicle is blocking the flow of traffic, you should
leave the vehicle where it is until the police arrive
leave the scene of the accident to call a tow truck
move the car out of the flow of traffic if possible
move the traffic flow around the car
Answer: Move the car out of the flow of traffic if possible.
please help!!
what group of people created the first form of rockets
1.greeks
2.Chinese
3.Americans
4.Russians
Answer:
I think that the answer is the Chinese
Explanation:
How do Solar Engineers Help Humans?
(2 or more sentences please)
Which of the following is an example of a reliable source?
A. A pamphlet on the economics of bridge building published by the organization
Citizens Against Government Spending.
B. An article in Environmental Science and Technology, a peer-reviewed journal
published by the American Chemical Society.
C. A newspaper editorial written by a United States senator.
D. A blog post by a university engineering student.
I think its C
im pretty sure
or it could be B
but C is my first choice
The ___ is a device that applies the same tension to each rear parking brake cable
Answer:
foot pedal
Explanation: mark brainlest plz
4. What is the best explanation of electric current in a wiRe 100+ PTS
Answer:
The best explanation of 'electric current' in a wire can be defined as Electron flow because of 'electrical attraction and repulsion'. Explanation: Current can be defined as the flow of electrons. When the electron charges get attracted and the current flow happens.
Explanation:
Can I get Brainiest
Answer:
Electron flow because of 'electrical attraction and repulsion'
Explanation:
what are some questions about simple machines that don't make me sound like i didn't pay attention in the lesson?
Answer:
what are simple machines?
Explanation:
it is 2020 let's be honest all
A generator that produces 40 kilowatts uses twice as much fuel in an hour as a generator that produces 20 kilowatts. Explain why, in terms of energy transformations.
Answer:
In terms of energy conversion/transformation the generator that produces 40 kilowatts of power will consume twice as much fuel than a generator that produces 20 watts because the more electrical power produced by an electrical generator, the more fuel is consumed. The amount of electrical energy produced is directly proportional to the fuel consumed.
Explanation:
Energy transformation is the conversion of energy from one form to another. Their are various forms of energy namely kinetic energy, electric energy, mechanical energy , chemical energy , solar energy, heat energy , nuclear energy. These energy can be transformed from one form to another . Example our body convert chemical energy through food we eat to mechanical energy.
The generator transforms mechanical energy into electrical energy . The kilowatts tells you the amount of power the generator produces .The energy is measured in kilowatts per hour which is the power used over a period of time.
In terms of energy conversion/transformation the generator that produces 40 kilowatts of power will consume twice as much fuel than a generator that produces 20 watts because the more electrical power produced by an electrical generator, the more fuel is consumed. The amount of electrical energy produced is directly proportional to the fuel consumed. So far the generator conversion efficiency are equal for both generators the generator with the higher power generation will consume more fuel per hour.
A generator that produces 40 kilowatts uses twice as much fuel as a generator that produces 20 kilowatts, due to the increased energy transformation process.
Explanation:The amount of fuel required by a generator is directly proportional to the power it produces. In this case, the generator that produces 40 kilowatts uses twice as much fuel in an hour as the generator that produces 20 kilowatts. This can be explained in terms of energy transformations.
In a generator, mechanical energy from the fuel is converted into electrical energy. The more power the generator produces, the more mechanical energy it needs, which requires a larger amount of fuel. Therefore, the generator that produces 40 kilowatts requires twice as much fuel in an hour as the one that produces 20 kilowatts.
To put it simply, the energy transformation process in the generator with higher power demands more fuel to generate the additional electrical energy.
Learn more about Energy transformations here:https://brainly.com/question/32045903
#SPJ3
What historical event allowed both aerospace fields to make enormous strides forward?
Answer:
The world wars. Especially world War II
Explanation:
The world wars were the single most notable events that led to the leap in development of the aircraft from a simple apparatus capable of flight to a sophisticated flight machine. Airplane production was at its maximum during these periods (especially world war II) and has never seen that capacity of production again since. Countries focused on research that could add even the slightest enhancements to their aircraft in order to for it to surpass that of other countries.
Why is the flushing cycle important for flake ice machines?
A.
Flake ice machines have greater concentrations of scale buildup as compared to cube ice machines.
B.
Flake ice machines have an exposed preparation chamber that can easily attract dust and other contaminants.
C.
Flake ice machine shavers can quickly pick up off-flavors.
D.
Flake ice machines must defrost periodically to work adequately.
A
Explanation:
Flake ice machines will have greater concentrations of scale buildup as compared to cube ice machines. Since solids collect near the bottom of the auger, a complete draining and flush ofthe system is required.
Explain the characteristics of reliable sources
Answer:
it states sources where it got the info from
Explanation:
Answer:A reliable source is one that provides a thorough, well-reasoned theory, argument, discussion, etc. based on strong evidence. Scholarly, peer-reviewed articles or books -written by researchers for students and researchers. ... These sources may provide some of their articles online for free.
Explanation:
Which of the following team members would not be involved in the design of
gameplay?
Graphic Designer
Quality assurance tester
Writer
Sound Designer
The team members would not be involved in the design of gameplay is: Writer.
Writer is the person who write books or write stories and they are not involved in the design of gameplay as their major role is to write.
A graphic designer is involved in the design of gameplay as they help to create images by making use of computer software such as:
Adobe InDesign CorelDraw GraphicsAdobe Photoshop etcQuality assurance tester responsibility is to ensure that the software program are of high standard and high qualities.
Sound Designer role is to choose the sound that will best suit the gameplay.
Inconclusion the team members would not be involved in the design of gameplay is: Writer.
Learn more here:
https://brainly.com/question/19967395
Do NOT mix ____________________ with used oil. A) Transmission oilB) AntifreezeC) Hydraulic fluidsD) Synthetic oil
The basic concept of feedback control is that an error must exist before some corrective action can be made?
Answer:
The correct answer is True.
Explanation:
The feedback control system implies that to make a feedback, there must first be an error, otherwise there will be nothing to correct.
This system works so that there is an output that is controlled through a signal.
This signal will be feedback and it will signal an error which will be detected by a controller that will allow entry into the system.
In basic words, this system processes signals, samples them in the form of an output, and re-enters them feedback to detect the error signal.