A soil sample is 25 percent sand, 55 percent clay, and 20 percent silt. Use the following soil texture triangle to determine the type of soil present in this sample.
a-Clay
b- Silty loam
c-Sandy clay
d-Sandy clay loam
Answer:
A. Clay
Explanation:
The soil texture triangle is used to determine the type of soil present in the sample on the basis of percentage of clay, sand and silt in the soil sample. Putting the values of each soil type (clay= 55%, sand =25% and silt =20), the type of soil present in the same becomes to be "clay".
What do you write on the chart if doctor states, “the pulses are fine” after checking the patient’s pulse near the …?
The radial artery is usually the place where pulse is being detected, and it is found in the human forearm. So the doctor must have checked the patient’s pulse at the radial artery of the patient. In documenting if the pulse is fine or within the normal range, the best way to right it in record is the radial pulse is +2.
Is the process by which two groups of organisms speciate in response to each other and at the same time?
The Big Bang theory was supported by the discovery of the
A- galaxies in the universe
B- temperature of the universe
C-gravitational forever between planets
D- red shift in electromagnetic spectrum
Answer:
Option D, red shift in electromagnetic spectrum
Explanation:
According to the Big Bang theory the universe is continuously expanding and all celestial bodies are moving away from each other. This fact was established when red shift affect was discovered. A red shift is basically a shift/increase in the wavelength of light released by any star over a period of time. The farther the star, the more is its wavelength red shifted.
This red shift is continuously increasing which means that the light emitting celestial objects are continuously moving away from each other.
Hence, option D is correct answer
What is the term for acquiring an infection through mucosal tissues?
In cohort studies of the role of a suspected factor in the etiology of a disease, it is essential that
Different mating habits cause two groups within a population to be less likely to mate with each other. as a result, reproductive isolation occurs between the two groups. what does this cause?
Reproductive isolation caused by different mating habits or physical separation leads to the divergence of two groups within a population into separate species through the process of speciation.
When different mating habits cause two groups within a population to be less likely to mate with each other, this leads to reproductive isolation. The outcome of reproductive isolation is often the divergence of the two groups into separate species, a process known as speciation. The driving forces behind this include natural selection, mutation, and genetic drift, which act over time to increase the genetic and phenotypic differences between the populations. As a result, even if individuals from the two groups are brought together, they may no longer be capable of producing viable or fertile offspring, thus cementing the reproductive isolation.
One example of this process involves habitat isolation, where a population of a species moves or is moved to a new habitat that does not overlap with the rest of the species. Over time, this separation can lead to speciation due to the lack of genetic exchange and the different selection pressures in the new environment.
A heat wave that causes an organism to move to a cooler climate is an example of a(n)
a. adaptation
b. extinction
c. speciation
d. stimulus
Answer: stimulus
Explanation: I am a university graduate.
The first scientist to describe living cells as seen through a simple microscope
Robert Hooke first described living cells as seen through a simple microscope, while Antony van Leeuwenhoek advanced microscopy and cell biology by observing single-celled organisms he named 'animalcules' using high-powered microscopes.
Explanation:The first scientist to describe living cells as viewed through a simple microscope was Robert Hooke. In his 1665 publication, 'Micrographia', Hooke observed and gave the name 'cell' to box-like structures he noticed while studying a piece of cork. Antony van Leeuwenhoek, a Dutch shopkeeper and lens crafter, also significantly advanced the field of microscopy and cell biology. Van Leeuwenhoek devised microscopes more powerful than previous iterations and was able to observe single-celled organisms—tiny creatures he named animalcules.
Learn more about Cell biology and microscopy here:https://brainly.com/question/32316784
#SPJ12
_______ is vesicle-aided transport out of the cell.
What is the common feature of domain Archea and domain bacteria
More than _______ amino acids linked together is considered a protein.
Over 50 amino acids in a chain are considered a protein.
Answer:
More than 100 amino acids linked together is considered a protein.
Explanation:
The scientists categorize the links of amino acids based on the number of aminoacids:
Peptides: two to ten amino acids
Polypeptides: 11 to 100 amino acids
Proteins are 100 and more of 100 amino acids.
A protein is a chain of amino acids linked by peptide bonds. They are responsible of the biochemical reaction of cells.
One early influence of prenatal testosterone is on the organism's
Illustrate the position of the Earth, Moon, and Sun during a lunar eclipse. You may do so by typing the words or by drawing and labeling a picture.
Why is it often difficult to distinguish between the functions of the nervous and endocrine systems?
The element was poisonous to the first forms of life on earth until they evolved to take advantage of it by using cellular respiration. What is it? A. Hydrogen B. Nitrogen C. Oxygen D. Sulfur
Diffusion across a biological membrane is called
Glycogen belongs in the class of molecules known as
Glycogen belongs in the class of molecules known as polysaccharides. Therefore, the correct option is 2.
What are polysaccharides?Polysaccharides are large, complex carbohydrate molecules made up of long chains of simple sugar units, or monosaccharides. They play important roles in energy storage and structural support in cells and organisms.
Glycogen is a highly branched polysaccharide that is the primary storage form of glucose in animals, including humans. It is stored in the liver and muscles and can be broken down into glucose when needed to provide energy for the body's cells. Therefore, the correct option is 2.
Learn more about polysaccharides, here:
https://brainly.com/question/28264521
#SPJ2
The question is incomplete, but most probably the complete question is,
Glycogen belongs in the class of molecules known as:
1. Amino acids
2. Polysaccharides
3. Nucleic acids
4. Fatty acids
Which of these is a cost of recycling aluminum?
A. Preserving Earth's remaining aluminum reserves B. Disrupting tropical rain forest plants and animals C. Producing wastes that are toxic to animals
D. Using energy to transport a heavy metal
Answer: Option (C) is the correct answer.
Explanation:
When we refine or recycle aluminium then it results in the formation of red mud which is actually a toxic industrial waste.
Therefore, this industrial waste when drained goes into the rivers, lakes, sea etc. As a result, it causes harm to both plants and animals because animals drink water from lakes, rivers etc.
Whereas this water which is contaminated by red mud is absorbed by the soil also. Therefore, it harms the plants.
Hence, we can conclude that producing wastes that are toxic to animals is a cost of recycling aluminum.
Producing wastes that are toxic to animals is a cost of recycling aluminum (Option C).
Aluminum is a metal that may result toxic for life and it must be recycled properly.Aluminum's metal cation is highly reactive, being therefore very toxic.This cation generates oxidative free radicals that may damage animals.In conclusion, producing wastes that are toxic to animals is a cost of recycling aluminum (Option C).
Learn more in:
https://brainly.com/question/61301
If the length of the absolute refractory period in cardiac muscle cells was the same as it was for skeletal muscle ________.
Difference between qualitative and quantitative analysis in chemistry
Chemistry includes qualitative analysis, which is descriptive and non-numerical, and quantitative analysis, which involves specific measurements and units. Qualitative analysis provides general descriptions like color or texture, while quantitative analysis offers precise measurements, as seen in titrations and stoichiometry. Both types of analysis are essential in understanding the composition and behavior of substances.
Explanation:Qualitative analysis in chemistry refers to descriptions of the quality of something, which do not involve measurements or numbers. For example, qualitative properties can be descriptions such as sulfur is yellow, or that a solution turns blue when a penny is dissolved in it. On the other hand, quantitative analysis deals with numbers and units, providing a specific amount of something present in a substance or reaction. It encompasses counting or measuring certain aspects like the concentration of a solution, or the temperature at which sulfur melts, which is 115.21° Celsius.
Quantitative descriptions are critical in the field of chemistry as they help in accurately characterizing substances and in understanding reactions. For instance, the stoichiometry of chemical reactions is essential in quantitative chemical analysis methods such as titrations, where the volume of a titrant required to react completely with a sample is measured and used to calculate the concentration of the analyte. This quantitative approach allows for precise understanding and manipulation of chemical properties and interactions, a cornerstone of modern chemical science as it was for Dalton's atomic theory.
Although qualitative observations are fundamental to chemistry, there is a definitive need for quantitative measurements, especially in fields like solution chemistry. The precise quantitative methods of expressing solution concentration, such as molarity or percent composition, provide a deeper and more comprehensive understanding than qualitative terms like "concentrated" and "dilute".
The most important characteristic that a drug must have to freely pass from the gastrointestinal tract into the circulation is to be
There are two answers – in salt form and fat soluble, depending on which way you look at it. According to Penn Foster's "How Drugs Work”, "No matter what form of the drug is swallowed, the drug must go into the free solution in the stomach or small intestine to pass from the GI tract into circulation. One factor that allows many drugs to go into free solution in the GI tract is that the drug is in a salt form within the commercial preparation. Salts of drugs dissolve readily in stomach liquid."
Also quoted from "How Drugs Work", "The portal
blood supply is joined to the small intestine by capillaries connecting to the
gastrointestinal mucosal cells. In some cases, it isn’t easy to get through
these mucosal cells because there’s a selective process that attempts to allow
only important substances through. In the case of drugs, it has been found that
the fat-soluble molecules (lipid-soluble drugs) are absorbed through these mucosal cells very well."
Which of the following is NOT transported by vascular tissue?
1.Food
2.Water
3.Hormones
4.None Of The Above
What are the van der walls forces
Final answer:
Van der Waals forces are intermolecular attractions that include dipole-dipole interactions and London dispersion forces, influencing the behavior of molecules in various states of matter.
Explanation:
Van der Waals forces are a type of intermolecular force that include dipole-dipole interactions and London dispersion forces. Dipole-dipole forces occur between polar molecules with permanent dipoles, whereas London dispersion forces arise from temporary dipoles caused by the movement of electrons within atoms or nonpolar molecules. Dispersion forces are present in all matter, and though they are the weakest type of van der Waals force, they can still significantly influence the physical properties of substances.
_____ are rod-shaped structures that contain all basic hereditary information.
Which of these rocks are formed by erosion and deposition? Select the two correct answers.
A. Basalt
B. Granite
C. Limestone
D. Sandstone
E. Marble
Answer:
Options (C) and (D)
Explanation:
During the process of weathering, the rocks are broken down into smaller and finer particles. These are commonly known as sediments, which are transported from one place and are deposited in another place. These sediments after being deposited are subject to compaction and lithification, resulting in the formation of sedimentary rocks. Some of the rocks formed by this process are sandstone, limestone, siltstone, mudstone, and dolostone.
In the given condition, Limestone and Sandstone are the two sedimentary rocks that are formed from the erosion and deposition of sediments.
Sandstone is dominated by sand particles and limestone are carbonate minerals dominated by calcite. They are often found to contain shells of various fossilized organisms.
Thus, the correct answers are options (C) and (D).
What is a major benefit of schooling
Schooling helps to develop the division of labor by teaching students different skills and knowledge. This allows them to specialize in different areas and contribute to society in a variety of ways. Hence option C is correct.
For example, some people may become doctors, while others may become engineers or teachers. This division of labor allows society to function more efficiently and effectively.
The other options are not major benefits of schooling. Reproduction is a biological process that is not directly related to schooling.
Hydrodynamic efficiency and aerodynamic efficiency are terms that refer to the way in which objects move through water and air, respectively. These terms are not relevant to schooling.
Therefore, option C) division of labor is correct.
To know more about Schooling:
https://brainly.com/question/11557445
#SPJ6
For a science class project, Sandy wants to test the effect of rap music on pea plant growth. She plays loud rap music 24 hours a day to a series of pea plants grown under light and watered daily. At the end of her experiment, she concludes that rap is conducive to plant growth. Sandy receives a low grade on this experiment from her teacher.
Why did Sandy’s teacher give a low grade for this experiment? What was the key problem with it? How could Sandy change her experiment to fix the problem? Rewrite the experiment so it will receive a better grade.
Answer:
Sandy's teacher give her a low grade because it was not an experiment.
The key problem was that Sandy did not had a control group.
The new experiment will have two groups (control and experimental). Each group will have the same amount of pea plants, and the pea plants will be watered with the same amount of water at the same time daily. Also, pea plants will receive the same amount of light. The only thing that will change between groups will be rap music. In the control group, there will no music played while loud rap music will be played 24 hrs a day in the experimental group. At the end of the experiment, all pea plants will be measured, and the measures will be compared between both groups.
Explanation:
Experimental investigations are performed to evaluate the effect of a specific variable. In order to measure this effect, you have to control other variables. In the experimental design, you need to have more than one group, but at least two (control and an experimental). The control group is the group from which you will compare, so it will not be exposed to the independent variable. The experimental group is the one that has to be exposed to the independent variable.
In this case, the independent variable is rap music, and the dependent variable is the amount of growth.
WORTH 15 FOR 2 EASY QUESTIONS MULTIPLE CHOICE SECOND QUESTIONS EVEN EASIER THAN THE FIRST IM PRETTY SURE THE ANSWER IS C JUST CHECKING
Which of the following conditions would likely prevent the assembly and survival of new kinds of organic molecules on Earth today?
A. the presence of bacteria and other life forms
B. the presence of carbon dioxide
C. the supply of atoms that serve as raw material
D. the light and warmth from the sun
2.
Several different species make up a
A. family.
B. genus.
C. kingdom.
D. phylum.
2. Several Different Species Make up a
D. Phylum
The answer to question 1 is A - The presence of bacteria and other life forms
The answer to question 2 is D - Phylum
Plants are important to the development of karst primarily because
Plants contribute to karst formation by facilitating rock dissolution, reducing erosion, influencing soil quality, and impacting the aquatic and atmospheric conditions that are essential to the development of karst topography.
Explanation:Importance of Plants in Karst DevelopmentPlants are important to the development of karst primarily because they impact chemical and physical attributes of their environment. Their root systems absorb nutrients and water, which facilitates the dissolution process of soluble rocks such as limestone, forming distinctive karst landscapes. Furthermore, plants help to stabilize the soil, reducing erosion and slowing down runoff, which is crucial in karst regions that are prone to the rapid drainage of surface water. The storage of excess water by plants during floods also contributes to the shaping of karst features.
In areas of traditional agriculture, such as the karst topography in Viñales Valley, Cuba, plants support the tobacco-growing industry by influencing the soil quality. The growth form and function of freshwater plants or macrophytes are determinants of aquatic plant function in aquatic ecosystems, which can be part of karst systems. Removal of carbon dioxide from the atmosphere by plants reduces the greenhouse effect, which also influences climatic factors relevant to karst formation.
Therefore, plants play a multifaceted role in the development of karst formations, not only through their physical impact on the landscape but also through their influence on the aquatic environment, soil, and atmospheric conditions.