What caused the deflection of the alpha particles in rutherford's gold foil experiment?

First we find for the wavelength of the photon released due to change in energy level. We use the Rydberg equation:

1/ʎ = R [1/n1^2 – 1/n2^2]

where,

ʎ is the wavelength

R is the rydbergs constant = 1.097×10^7 m^-1

n1 is the 1st energy level = 1

n2 is the higher energy level = infinity, so 1/n2 = 0

Calculating for ʎ:

1/ʎ = 1.097×10^7 m^-1 * [1/1^2 – 0]

ʎ = 9.1158 x 10^-8 m

Then calculate the energy using Plancks equation:

E = hc/ʎ

where,

h is plancks constant = 6.626×10^−34 J s

c is speed of light = 3x10^8 m/s

E = (6.626×10^−34 J s * 3x10^8 m/s) / 9.1158 x 10^-8 m

E = 2.18 x 10^-18 J = 2.18 x 10^-21 kJ

This is still per atom, so multiply by Avogadros number = 6.022 x 10^23 atoms / mol:

E = (2.18 x 10^-21 kJ / atom) * (6.022 x 10^23 atoms / mol)

E = 1312 kJ/mol

To ionize a ground state hydrogen atom, the energy required is 1312 kJ/mol.  

Calculating the Energy Required to Ionize a Ground State Hydrogen Atom

To calculate the energy required to ionize a ground state hydrogen atom, we use the formula for the ionization energy of hydrogen. The ionization energy (">Ei") represents the energy required to remove an electron completely from an atom:

The ionization energy can be found using the Rydberg formula for hydrogen:

Ei = -13.6 eV

Since 1 electron-volt (eV) is equal to 1.602 x 10⁻¹⁹ Joules, we convert this energy to Joules:

Ei (in Joules) = -13.6 eV × 1.602 x 10⁻¹⁹ J/eV = -2.1792 x 10⁻¹⁸ J

To find the energy required per mole of hydrogen atoms, we use Avogadro's number (6.022 x 10²³ atoms/mol):

Total energy per mole

= Ei × Avogadro's number

= -2.1792 x 10⁻¹⁸ J × 6.022 x 10²³ mol⁻¹

This results in:

Total energy per mole = -1.312 x 10⁶ J/mol

Since the question asks for the energy in kilojoules:

-1.312 x 10⁶ J/mol = -1312 kJ/mol

Therefore, the energy required to ionize a ground state hydrogen atom is 1312 kJ/mol.

Hydrochloric acid has a chemical formula of HCl. Now when this is mixed with water to form an aqueous solution, HCl dissociates into its component ions:

HCl  -->  H+  +  Cl-

HCl completely dissociates into H+ and Cl- because it is a strong acid. The species that is responsible for this acidic nature is H+ ion.

Answer:

H+

The set of values that represents standard pressure and standard temperature is (3) 101.3 kPa and 0 °C.

The standard state comprehends a set of conditions that are defined by convention.

At standard pressure and temperature (STP),  1 mole of an ideal gas occupies 22.4 L.

The set of values that represents standard pressure and standard temperature is (3) 101.3 kPa and 0 °C.

Learn more: https://brainly.com/question/6439270

The quantum mechanical model of the atom, developed from Schrödinger's wave equation, describes the probability of finding an electron in a certain position rather than defining an exact path. It utilizes orbitals to depict likely electron locations, contrasting with Niels Bohr's model of well-defined circular orbits.

The quantum mechanical model of the atom is concerned with the probability of finding an electron in a certain position. This concept is a key aspect of quantum mechanics, which posits that we cannot specify the exact location of an electron, but can only describe the probability of its presence within a certain region of space. This model is a radical departure from the Bohr model, which prescribed very well-defined circular orbits for the electron paths around the nucleus.

Erwin Schrödinger developed the Schrödinger wave equation, a mathematical formulation leading to wave functions that describe these probabilities. Unlike Niels Bohr's model that employed well-defined circular orbits for electrons, the quantum mechanical model uses orbitals, which are mathematically derived regions indicating where an electron is likely to be found.

The Bohr model was an earlier atomic theory proposed by Niels Bohr, whereas the quantum mechanical model derives from the solution to Schrödinger's equation and does not define exact electron paths but rather probability densities for electron locations. The wave functions or orbitals are three-dimensional stationary waves characterized by quantum numbers resulting from their mathematical nature, without the need for the ad hoc assumptions required in Bohr's model.

Answer:

The answer is C

Explanation:

Mendeleev’s periodic table arranged elements in order of increasing atomic mass; it was noticed that chemical properties repeated. Mendeleev predicted an element had not been discovered to fit the space.

In a period, the atomic radius decreases as the atomic number increases because the effective nuclear charge increases from left to right in a period.

The atomic radius of an atom of an element can be described as the shortest distance between the center of the nucleus of the atom and the valence shell of the atom. An atomic radius can also be described as half the distance between two atoms of an element that are bonded together.

In general, the atomic radius of an atom decreases as we move from left to right in a period because while moving from left to right in a period, there is an increase in the effective nuclear charge of an atom. In periods, the electrons enter the same outermost shell.

In a group from top to bottom, the atomic radius of the atom increases because of the addition of a new principle shell.

Learn more about atomic radius, here:

brainly.com/question/14544878

#SPJ5

Lipids are mostly made up of carbon, hydrogen, and oxygen. Some lipids may also contain phosphorus and nitrogen but to a lesser degree. A prime example is a triglyceride, a common fat or oil, composed of glycerol and fatty acids, both of which contain carbon, hydrogen, and a small amount of oxygen.

Lipids are a group of naturally occurring molecules that include fats, waxes, sterols, fat-soluble vitamins, monoglycerides, diglycerides, triglycerides, and others. The main types of atoms that make up lipids are carbon (C), hydrogen (H), and oxygen (O). However, they contain less oxygen compared to carbohydrates. Some lipids also might include other elements such as phosphorus (P) and nitrogen (N) but to a lesser extent.

To give you a general example, a triglyceride, which is a typical fat or oil, is made from one molecule of glycerol (which contains carbon, hydrogen, and oxygen) and three fatty acids (which are chains of carbon and hydrogen, also containing a small amount of oxygen).

https://brainly.com/question/32844147

#SPJ6

Smoke particles disrupt the ion flow created by americium-241 in smoke detectors, causing a drop in electric current and triggering the alarm. This mechanism helps in early fire detection and increases safety.

Inside a smoke detector, a tiny amount of the radioactive element americium-241 emits α-particles, which ionize the air and create a small electric current between two metal plates. This continuous ionization forms the basis for detecting smoke. When smoke particles from a fire enter the detector, they impede the flow of ions, thus reducing the conductivity of the air and causing a significant drop in the current. This decrease in current level is detected by the circuit, which then triggers the alarm to alert of the potential danger of a fire.

Regular battery replacement is recommended as the continuous drain of current by the ionization process depletes the battery over time, irrespective of alarm activation. The americium-241 is sealed in plastic within the detector, making it harmless unless tampered with.

Answer: ICI3

Explanation: A Pex... Hope This Helps

3.25 x 10^5 μg is not equal to 325 cg.

The reaction of 1.35 g of Al(s) with excess hydrochloric acid produces approximately 0.15 g of H2(g). This is determined by converting the mass of Al(s) to moles, using the balanced chemical equation to determine the equivalent moles of H2(g), and finally converting the moles of H2(g) back to grams.

The reaction given is: 2 Al(s) + 6 HCl(aq) → 2 AlCl3(aq) + 3 H2(g). This shows that for every 2 moles of Al(s), 3 moles of H2(g) are produced. First, we need to convert the mass of Al(s) to moles. The molar mass of Al is approximately 27 g/mole. So, 1.35 g of Al(s) equates to approximately 0.05 moles. In a balanced equation, the ratio of moles of Al to H2 is 2:3. Therefore, the amount of H2 generated from 0.05 moles of Al would be (0.05 * 3) / 2 = 0.075 moles. The molar mass of H2 is approximately 2 g/mole, so 0.075 moles of H2(g) equates to approximately 0.15 g. Therefore, the reaction of 1.35 g of Al(s) with excess hydrochloric acid produces approximately 0.15 g of H2(g).

https://brainly.com/question/34137415

#SPJ2

The periodic table is the arrangement of the elements in the periods and groups. They are not in order as they are arranged based on their atomic numbers.

The periodic table is the classification of the elements like alkali metals, alkaline, transitions metals, noble gases, metalloids, lanthanides etc. based on the increasing atomic numbers.

The atomic number of the elements is the number of protons present in the nucleus of the elemental atom. The atomic number defines the chemical and physical properties of the element.

Therefore, elements are not in the increasing order of the atomic mass as they are arranged based on the atomic number.

Learn more about the periodic table and atomic numbers here:

https://brainly.com/question/347109

A solution with a ph less than 7 is called Acidic Solution and has a higher number of hydrogen ion than a solution with a ph greater than 7.

The pH is a measure of the amount of hydrogen ions in Solutions .

An Acidic Solution is a solution that have high concentration or amount of hydrogen ion.

The pH of acidic solution is less than 7.

A basic Solution is a solution that have low concentration of hydrogen ion.

The pH of basic Solution is greater than 7.

Solution that are neither acidic nor basic have a pH of 7.

Therefore, A solution with a ph less than 7 is called Acidic Solution and has a higher number of hydrogen ion than a solution with a ph greater than 7.

Learn more on pH from the link below.

https://brainly.com/question/24753206