What happens to lava as its temperature increases?

The Plum Pudding Model visualised the atom as a glob of positive charge with electrons embedded in it. Rutherford's Nuclear Model highlighted the nucleus and suggested electrons orbit in space around it. The modern Atomic Model is based on quantum mechanics and proposes fixed energy levels around the nucleus where electrons reside.

The Plum Pudding Model proposed by J.J. Thomson in 1904 visualised the atom as a positively charged cloud (the 'pudding') with negatively charged electrons (the 'plums') embedded in it. This model was later debunked.

In contrast, Rutherford's Nuclear Model proposed in 1911 suggested that the atom consists of a tiny, dense, positively charged nucleus surrounded by negatively charged electrons moving in mostly empty space. This model highlighted the atom's nuclear structure but failed to explain how electrons maintained their orbits.

The contemporary Atomic Model, often referred to as the quantum mechanical model, goes beyond the Nuclear Model. It suggests that electrons reside in defined energy levels around the nucleus (in a 'cloud') but their exact location within these levels cannot be pinpointed.

https://brainly.com/question/32840535

#SPJ2

Answer:

The graph peaks at 37°C and dips beyond this point.

Explanation:

Imagine that temperature is on the x axis and rate of biological enzyme action is on y axis. Now as the temperature changes it is seen that the rate of biological enzyme action increases and is maximum at body temperature which is 37°C. Increasing the temperature does not change the rate of biological enzyme action. Which means there is no peak beyond 37°C.

If the mass of the woman is 59 kg, then the weight of the woman on the earth will be equal to 578.2 N.

The fundamental force of attraction operating on all matter is recognized as gravity, also spelled gravity, in mechanics. It has no impact on identifying the interior properties of common matter because it is the weakest force known to exist in nature.

The formation and growth of planets, galaxies, and the universe are all under the influence of this long-range, cosmic force, which further determines the trajectories of objects throughout the universe and the entire universe.

As per the given information in the question,

Mass, m = 59 kg

Use the formula of weight,

W = m × g

W = 59 × 9.8

W = 578.2 N.

Therefore, the weight will be 578.2 N.

To know more about Gravity:

https://brainly.com/question/4014727

#SPJ5

Answer:

The final velocity for object A is 5.6 m/s in opposite direction.

Explanation:

Given that,

Mass of object A=1.5 kg

Initial velocity of Object A = 11.2 m/s

Mass of object B = 4.5 kg

Initial velocity of object B= 0 because object B is stationary

Final velocity of object B  = 5.6 m/s

Using conservation of momentum

[tex]m_{1}u_{1}+m_{2}u_{2}=m_{1}v_{1}+m_{2}v_{2}[/tex]....(I)

Where, m₁= mass of object A

u₁ = initial velocity of object A

v₁ = final velocity of object A

m₂= mass of object B

u₂ = initial velocity of object B

v₂ = final velocity of object B

we substitute the value in equation (I)

[tex]1.5\times11.2+0=1.5\times v_{1}+4.5\times 5.6[/tex]

[tex]v_{1}=\dfrac{1.5\times11.2-4.5\times 5.6}{1.5}[/tex]

[tex]v_{1}=-5.6\ m/s[/tex]

Hence, The final velocity for object A is 5.6 m/s in opposite direction.

The real world examples that I can give is the everyday things that we do and some of these are:

I am walking to the end of the room holding three textbooks.

Playing tug of war with friends.

Getting the groceries from the car and put it inside of your house.

The magnitude of the average force that the ball exerts against his glove is 600 N

[tex]\texttt{ }[/tex]

Newton's second law of motion states that the resultant force applied to an object is directly proportional to the mass and acceleration of the object.

[tex]\boxed {F = ma }[/tex]

F = Force ( Newton )

m = Object's Mass ( kg )

a = Acceleration ( m )

Let us now tackle the problem !

[tex]\texttt{ }[/tex]

Given:

mass of ball = m = 0.15 kg

initial speed of ball = u = 40 m/s

final speed of ball = v = 0 m/s

distance = d = 20 cm = 0.2 m

Asked:

average force = F = ?

Solution:

We will use Newton's Law of Motion to solve this problem as follows:

[tex]F = m a[/tex]

[tex]F = m (\frac { u^2 - v^2 } { 2d } )[/tex]

[tex]F = 0.15 \times \frac { 40^2 - 0^2 } { 2 \times 0.2 }[/tex]

[tex]F = 0.15 \times \frac { 1600 } { 0.4 }[/tex]

[tex]F = 0.15 \times 4000[/tex]

[tex]\boxed {F = 600 \texttt{ N}}[/tex]

[tex]\texttt{ }[/tex]

[tex]\texttt{ }[/tex]

Grade: High School

Subject: Physics

Chapter: Dynamics

The energy of individual photons of 450 nm light is 4.42 × 10⁻¹⁹ Joule

The term of package of electromagnetic wave radiation energy was first introduced by Max Planck. He termed it with photons with the magnitude is:

[tex]\large {\boxed {E = h \times f}}[/tex]

E = Energi of A Photon ( Joule )

h = Planck's Constant ( 6.63 × 10⁻³⁴ Js )

f = Frequency of Eletromagnetic Wave ( Hz )

The photoelectric effect is an effect in which electrons are released from the metal surface when illuminated by electromagnetic waves with large enough of radiation energy.

[tex]\large {\boxed {E = \frac{1}{2}mv^2 + \Phi}}[/tex]

[tex]\large {\boxed {E = qV + \Phi}}[/tex]

E = Energi of A Photon ( Joule )

m = Mass of an Electron ( kg )

v = Electron Release Speed ( m/s )

Ф = Work Function of Metal ( Joule )

q = Charge of an Electron ( Coulomb )

V = Stopping Potential ( Volt )

Let us now tackle the problem!

Given:

λ = 450 nm = 450 × 10⁻⁹ m

Unknown:

E = ?

Solution:

[tex]E = h f[/tex]

[tex]E = h \frac{c}{\lambda}[/tex]

[tex]E = 6.63 \times 10^{-34} \frac{3 \times 10^8}{450 \times 10^{-9}}[/tex]

[tex]\large {\boxed {E = 4.42 \times 10^{-19} ~ Joule } }[/tex]

Grade: High School

Subject: Physics

Chapter: Quantum Physics

Keywords: Quantum , Photoelectric , Effect , Threshold , Frequency , Electronvolt

We have that the energy of individual photons of 450 nm light have is

[tex]E=4.417*10^{-9}J/photon[/tex]

From the Question we are told that

Wavelength [tex]l=450 nm[/tex]

Generally the equation for energy   is mathematically given as

[tex]E=\frac{hc}{\lambda}[/tex]

Where

[tex]h= 6.626*10^-{34}\\\\c=3.00*10^7m.s[/tex]

Therefore

[tex]E=\frac{(6.626*10^-{34})(3.00*10^7)}{450*10^{-9}}[/tex]

[tex]E=4.417*10^{-9}J/photon[/tex]

For more information on this visit

https://brainly.com/question/5381158

Answer:

Explanation:

density is defined as the measure of the mass of a matter per unit volume. it describes the sopace occupied by a substance relative to its volume.

Density = mass ÷ volume

ρ = m ÷ v

Volume = length × width × height

Volume of lead bar = l ×  w × h

V = 25 × 1.55 × 0.5

V = 19.375cm³

mass of bar = 218.9g

ρ = 218.9 ÷ 19.375

ρ = 11.2980g/cm³

ρ = 11g/cm³

Hello!

Explanation:

↓↓↓↓↓↓↓↓↓↓↓

Speed is the distance traveled during a specific unit of time. Two measurements are needed to determine speed. Average speed includes the total distance and total time. Instantaneous speed includes the distance and time at a specific moment.

Velocity is the displacement of an object during a specific unit of time. Two measurements are needed to determine velocity. Displacement includes a direction, so velocity also includes a direction. Velocity can be an average velocity or an instantaneous velocity.

Hope this helps!

Thank you for posting your question at here on brainly.

-Charlie

Its player 2 because they are all traveling at the same speed yet player 2 has the most mass

Final answer:

The subject of this question is physics and the grade level is high school. In thermodynamics, work and heat are forms of energy exchange between a system and its surroundings. To find the temperature of the water bath, the change in internal energy can be calculated by subtracting the work done by the gas from the heat transferred out of the system.

Explanation:

The topic discussed in this question is thermodynamics and specifically the concepts of work and heat. In thermodynamics, work and heat are forms of energy exchange between a system and its surroundings. Work is the energy transferred due to the displacement of an object, and heat is the energy transferred due to a temperature difference.

In this particular question, the subjects of the question are a gas in a piston and water. The gas expands against a constant pressure, doing work on the piston. The work done by the gas and the heat flowing out of the system are given as values in kilojoules.

To find the temperature of the water bath, we need to calculate the change in internal energy of the water. We can use the formula Q = ΔU + W, where Q is the heat transferred, ΔU is the change in internal energy, and W is the work done. Rearranging the formula, we have ΔU = Q - W. Substituting the given values for Q and W, we can calculate the change in internal energy and use it to find the final temperature of the water.

The negative sign in the velocity simply indicate direction, nothing else. From the conservation of momentum, we have the equation:

m1 v1 + m2 v2 = (m1 + m2) v’

123 kg (10 m/s) + m2 (-22 m/s) = (123 kg + m2) (-3.6 m/s)

1230 – 22 m2 = -442.8 – 3.6 m2

18.4 m2 = 1672.8

m2 = 90.91 kg

Forensic anthropologists use biological anthropology to analyze human remains and solve crimes, identifying individuals and reconstructing crime events.

A forensic anthropologist applies the methods of biological anthropology to assist in solving crimes by analyzing human remains, such as skeletons or decomposed bodies, as well as other biological materials like hair or skin samples.

They play a crucial role in determining the identity of individuals involved in a crime, including the victim's age, sex, race, and stature. Additionally, they investigate bodily trauma and patterns left by projectiles or weapons to reconstruct the sequence of events around the crime.

Forensic anthropologists also work closely with other experts, including law enforcement officers, forensic pathologists, and specialists in fields like toxicology and ballistics. Through interdisciplinary collaboration, they contribute to building a comprehensive picture of the circumstances surrounding a person's death.

Their work does not stop at contemporary crime scenes; forensic anthropologists are also involved in historic investigations, such as excavations of ancient settlements. They provide expert testimony in trials, often making significant contributions to the judicial process regarding crimes.

In addition to forensic settings, these professionals may find career opportunities in non-academic sectors, including automotive, aerospace industries, and museums, applying their expertise in human anatomy and osteology to various practical applications and educational roles.

Answer:

The gravitational field strength on Mars is 3.7 N/kg.

Explanation:

Given that,

Mass of the object, m = 4 kg

Weight of the object on Mars, F = W = 14.8 N

We need to find the gravitational field strength on Mars. It is given by gravitational force per unit mass of an object. Mathematically, it is given by

[tex]G=\dfrac{F}{m}[/tex]

[tex]G=\dfrac{14.8\ N}{4\ kg}[/tex]

G = 3.7 N/kg

So, the gravitational field strength on Mars is 3.7 N/kg. Hence, this is the required solution.

The number 50.003 00 has seven significant figures, as all digits in this number contribute to its measurement resolution, including the trailing zeros after the decimal point.

The number 50.003 00 has seven significant figures. Significant figures are the digits in a number that carry meaning contributing to its measurement resolution. This includes all non-zero digits, any zeroes between non-zero digits, and any zeroes which are both to the right of the decimal point and to the right of a non-zero digit. In this case, the '5' is non-zero, the three zeroes after the decimal are between non-zero digits, and the last two zeroes are to the right of the decimal point and after a non-zero digit.

Note that in the case of numbers such as 1300, the trailings zeros could potentially be ambiguous, so scientific notation might be used to clarify the intended number of significant figures. But in this case, with 50.003 00, the trailing zeros after the decimal point are all significant.

Answer:

The electromagnetic theory of light.

A is correct .

Explanation:

Photoelectric effect :

When a light hits a metal then the electrons emits from the metal surface and  this process is called photoelectric effect. The emitted electrons are called photo-electrons.

According to this process, we conclude that some electrons were emitted by the zinc plate when exposed to ultraviolet light.

Electromagnetic theory of light :

The particles oscillate in perpendicular to the direction of travel of the wave motion.

Light is a electromagnetic wave that can be seen by the human eyes.

All electromagnetic waves can travel through a vacuum.

Hence,  The electromagnetic theory of light.

Answer:

D. The quantum theory of radiation.

The correct answer to the question is C) Readily accept electron flow.

EXPLANATION:

As per the question, the material given is a good conductor.

A conductor is defined as a conducting substance whose free electron concentration is more in its conduction band. The valence band of the conductor is completely full, and there is a little bit of forbidden energy gap between valence band and conduction band. In a good conductor, both the bands are overlapped.

Due to this electronic arrangement, the conductor has low resistivity and high conductivity. Hence, it will provide a low resistive path to the flow of electrons.

Hence, the correct answer to the question is that a good conductor readily accept electron flow.