Modern scientists believe that the continents:
A. have never moved
B. have stopped moving
C. were once one big land mass
D. will eventually rejoin each other
Global warming is caused by an increase in the level of carbon dioxide gas in the atmosphere. How has this affected the world's oceans?
The effect on the worlds oceans are a large portion of the carbon dioxide gas is returned to the atmosphere by the oceans.
What is atmosphere?Atmosphere is defined as the layer of gases kept in place by Earth's gravity and forming its planetary atmosphere. In addition to preserving the oxygen we breathe, the atmosphere protects us from the Sun's harmful rays, maintains the planet's surface temperature, and is essential to the water cycle.
Global warming is defined as the phenomena of earth's average temperature gradually rising. Because more atmospheric carbon dioxide is dissolving in the water, the ocean has become more acidic during the past few decades. The mineral balance in the ocean water is impacted by higher acidity, which might make it more challenging for some marine species to develop their protective skeletons or shells.
Thus, the effect on the worlds oceans are a large portion of the carbon dioxide gas is returned to the atmosphere by the oceans.
To learn more about atmosphere, refer to the link below:
https://brainly.com/question/26767532
#SPJ6
A landslide is an example of which of the following:
A.
erosion agent
B.
mass wasting
C.
meandering
D.
evaporation
The right option is; B. mass wasting
A landslide is an example of mass wasting.
Mass wasting is the bulk movement of soil, sand, regolith, and rock downslope due to the force of gravity. A landslide is an example of mass wasting. Landslides occur in various environments that has steep or gentle slope gradients. Gravity is the major force that causes landslides, and it can also occur due to disturbance of slope, changes in groundwater, volcanic activity and earthquakes.
Mass wasting
Further Explanation:
The term landslide points out towards various other forms of mass wasting and that includes a wide range of ground movements. This phenomenon takes place almost at every part of the world. These forms of mass wasting include rock falls, mud flows as well as debris flows. Mass wasting takes place in variety of environments which is segregated by either steep or gentle steep gradients. The major force which is also known to be as the driving force behind these landslides is gravity but there are other reasons also involved behind mass wasting.
Many a times, mass wasting or landslides are triggered by a specific event which can be a heavy rainfall, earthquake or a slop cut in order to build roads etc. Landslides usually take place when there is a portion of the slope goes through some process which may stable it or unstable it. This phenomenon takes place due to decrease in the shear strength of the slope material and when that materials fails to hold on to that slope, landslide takes place.
Learn More:
1. identify one cause and one effect of Spanish settlement in north America https://brainly.com/question/4775525
2. Which region of Mexico is best for growing crops?https://brainly.com/question/1472033
3. central and state governments influence each other in https://brainly.com/question/462208
Answer Details:
Grade: High School
Chapter: Landslides
Subject: Geography
Keywords: Landslides, Mass wasting, slopes, earthquakes, rainfalls, material, involve, plastic, environment.
At what location does gravity play a role in moving tectonic plates?
A.in the mantle
B.in the core
C.at the edge of the plates
D.in the middle of a continent
The answer is C. at the edge of the plates
Could plains have once been a sea?
Major waterways in Israel????
what are the factors affecting the wheater?
These factors is crucial for meteorologists and climatologists in predicting weather patterns and studying climate change.
1. Latitude: The weather varies with latitude. Areas near the equator experience warmer weather due to the direct angle of the sun's rays, while regions near the poles are colder due to the oblique angle of the sun's rays.
2. Altitude: Higher altitudes generally have cooler weather because the atmosphere is thinner, which means less heat is retained.
3. Proximity to Water: Areas near large bodies of water tend to have more moderate temperatures due to the water's ability to store and release heat slowly. This is known as the maritime climate.
4. Prevailing Winds: The direction and origin of winds can greatly influence the weather. For example, winds from the ocean can bring moisture and cooler temperatures, while winds from land can bring dry and continental climates.
5. Ocean Currents: Warm and cold ocean currents can affect the climate of nearby coastal areas. Warm currents can bring warmer temperatures, while cold currents can cool the air.
6. Topography: The shape and elevation of the land can influence weather patterns. Mountains can create rain shadows, where one side of a mountain range experiences more rainfall than the other.
7. Vegetation: Forests and other vegetation can affect the weather by releasing moisture into the air and influencing the local climate.
8. Human Activity: Urban areas can create heat islands due to the concentration of heat-absorbing surfaces like concrete and asphalt. Pollution can also affect weather patterns and precipitation.9. Solar Radiation: The amount of solar energy received can change with the time of day, season, and solar activity cycles like sunspots.
10. Atmospheric Pressure: High and low-pressure systems can influence weather conditions, with low pressure often associated with cloudy and wet weather, and high pressure with clear and settled conditions.
11. Humidity: The amount of water vapor in the air can affect how comfortable the weather feels and can influence the formation of clouds and precipitation.
12. Cloud Cover: Clouds can reflect sunlight and affect temperatures, as well as influence precipitation patterns.
13. Seasonal Changes: The tilt of the Earth's axis and its orbit around the sun lead to seasons, which bring predictable changes in weather.
14. Climate Change: Long-term changes in the Earth's climate system can lead to changes in weather patterns, including increases in extreme weather events.
GUYS HURRY BECAUSE THIS IS A EASY MATH QUESTION WHAT ARE FIVE CITYS IN INDIANA?
Answer:
Carmel
Fishers
South Bend
Evansville
Fort Wayne
Explanation:
I looked at a map.
Where does the force of a tornado come from?
What are the 20 minerals that make up most of the rocks of earths crust are known as?
The Earth's crust is largely composed of oceanic basalt and continental granite, which are types of igneous rocks. Common minerals in these include silicon, oxygen, iron, aluminum, and magnesium. Other notable rocks include sedimentary rocks and metamorphic rocks.
Explanation:The 20 minerals that make up most of the Earth's crust are commonly found in oceanic basalt and continental granite. These are both types of igneous rock, which form from cooled, previously molten matter. Some common minerals include silicon, oxygen, iron, aluminum, and magnesium, found in varying proportions in different types of rock.
Other rocks we find on Earth are sedimentary rocks and metamorphic rocks. Sedimentary rocks are formed from fragments of igneous rock or shells of living organisms which are deposited by the wind or water and cemented together. Metamorphosed rocks are produced when high temperature or pressure alters igneous or sedimentary rock physically or chemically.
All these rocks and minerals are interconnected in a cycle driven by Earth's internal and surface processes like volcanic eruptions and plate tectonics.
Learn more about Earth's Crust Composition here:https://brainly.com/question/33716931
#SPJ12
in an electric circuit what happens to the energy of each charge
What type of day occurs when the sun reaches its greatest distance north or south of the equator?
A) Solstice
B)Penumbra
C)Umbra
D)Equinox
Answer: solstice. gradpoint
What's the definition of Dominican Republican?
Monsoon research is taking place in the Bay of Bengal. true or fase
The most prominent feature of ocean topography discovered in the 1960s was:
A. seamounts
B. volcanic activity at the ocean bottom
C. subduction zones
D. a mountain ridge which circles the earth
if the rate of melting is the same as the rate of accumulation, a glacier will: a) retreat b) stay stationary c)advance
How are earthquakes distributed on a map
The magnetic quality of ancient rocks is called __________.
iron deficiency
paleomagnetism
magnetic fields
geomagnetism
Which of the following is a characteristic of a flintlock muzzleloader?
Final answer:
A flintlock muzzleloader is characterized by its flintlock mechanism for igniting gunpowder and its smoothbore barrel, as it loads gunpowder and projectiles from the muzzle, or front end, of the barrel.
Explanation:
A flintlock muzzleloader is a type of firearm that was used extensively in the 17th, 18th, and early 19th centuries. It is characterized by the flintlock mechanism, where a piece of flint held in the jaws strikes a steel surface to produce sparks, which then ignite the gunpowder to fire the projectile. Another notable feature is that it is a muzzleloader, meaning the projectile and gunpowder are loaded from the open end of the barrel at the front of the gun.
In contrast to flintlock muzzleloaders, rifled firearms such as the noted Enfield rifle have grooves (rifling) in the barrel that impart spin to the bullet, thereby increasing accuracy and range. Flintlock muzzleloaders, however, have smoothbore barrels and do not utilize this rifling pattern. The Enfield rifle's importance also stemmed from the American System of Manufacturing, which meant that parts were standardized and could be easily replaced, unlike earlier guns where each was handcrafted and unique.
What type of fault is the Ramapo Fault:
A. Normal fault
B. Reverse fault
C. Strike-slip fault
Strike-slip fault is a type of Ramapo Fault.
What is Strike-slip fault?Most vertical openings where the blocks have mainly migrated horizontally are cognised as strike-slip faults. Ramapo faults consider strike-slip faults.
Right lateral motion occurs when the block opposite an observer gazing across the fault travels to the right; left sidelong motion occurs when the block moves to the left.
Therefore, option C is correct.
Learn more about the Ramapo Fault, refer to:
https://brainly.com/question/25762503
#SPJ2
the place where two plates collide and build a new surface feature like these mountains is called a
what are four kinds of music that the south is known for in the United States
Which term specifically describes small chunks of rocks and debris in space that travel through the Earth’s atmosphere and hit its surface?
Answer:
The answer is C. A meteor.
Explanation:
Mechanical weathering in which rock is worn away by grinding action of other rock particles carried by the air is called
A. Erosion
B. Cracking and peeling
C. Abrasion
D. Ice wedging
factors that determine the resistance of rock to denudation
The factors that determine the resistance of rock are as following:
The structure of the earthLocal climate of an area.Influence of manExplanation
Nature of relief The higher is the relief of a particular region, the higher is the rate of denudation and the lower is the relief of that region, the lower is the rate of denudation.
The structure of the earth. The softer the structure of the earth, the greater is the rate of denudation and vice versa. Local climate of an area. Wet climates tends to increase the rate of denudation as compared to dry climate. Influence of man. The higher the rate of man’s activities on the earth surface, the greater the rate of denudation and vice versa.Summarize the distribution of earthquakes on Earth
Earthquakes primarily occur along the tectonic plate boundaries, notably around the Pacific Ocean's Ring of Fire and along divergent and transform boundaries. Deep earthquakes are common in subduction zones, while intraplate earthquakes are rare.
The distribution of earthquakes on Earth is closely related to the boundaries of tectonic plates. Approximately 95% of earthquakes occur along tectonic plate boundaries, with the majority happening around the Pacific Ocean basin, known as the Ring of Fire.
This zone is notorious for earthquakes and volcanic activity due to the presence of convergent and transform boundaries. About 15% of earthquakes occur in the Mediterranean-Asiatic Belt due to the convergence of the Indian Plate and the Eurasian Plate, leading to the formation of significant mountain ranges.
Shallow earthquakes are typical along divergent boundaries, such as the mid-Atlantic ridge and the East Pacific Rise, as well as along transform faults like the San Andreas Fault. In subduction zones, earthquakes are more abundant and increase in depth on the landward side. Meanwhile, only about 5% of earthquakes are intraplate, occurring away from the plate boundaries.
Who defeated the Spanish in Colombia
"The correct answer is Simón Bolívar.
Simón Bolívar was the military and political leader who played a key role in Latin America's successful struggle for independence from the Spanish Empire. In the case of Colombia, Bolívar led a series of military campaigns that ultimately resulted in the defeat of Spanish forces and the liberation of Colombia from Spanish rule. One of the decisive battles in this process was the Battle of Boyacá on August 7, 1819, which led to the independence of the area that is now Colombia. After this victory, Bolívar became the first president of the Republic of Gran Colombia, which included present-day Colombia, Venezuela, Ecuador, and Panama. His leadership and vision were instrumental in the formation of several independent South American states."
Why is the equator hotter than the poles?
what is the size of South America in comparison to the other continents
according to the following map of European countries color coded based on GDP, what can you infer about the GDp of France and the UK compared to the GDP of the Mediterranean countries?
Answer:
The Answer is Portugal
Explanation:
I just took the test