What is the pH of a buffer solution that is 0.211 M in hypochlorous acid (HClO) and 0.111 M in sodium hypochlorite? The Ka of hypochlorous acid is 3.8 ⋅ 10-8. What is the pH of a buffer solution that is 0.211 M in hypochlorous acid (HClO) and 0.111 M in sodium hypochlorite? The Ka of hypochlorous acid is 3.8 x 10-8.


a. 7.7

b. 0

c. 7.14

d. 14.28

e. 9.05

f. 6.86

Answer:

Time is something I constantly run out of-

Answer:

The concept of time is self-evident. An hour consists of a certain number of minutes, a day of hours and a year of days. ... Time is represented through change, such as the circular motion of the moon around Earth. The passing of time is indeed closely connected to the concept of space

Answer:

Approximately [tex]1.3\; \rm mol \cdot L^{-1}[/tex]. (Assuming that the question says [tex]0.867[/tex] moles of salt in this [tex]0.69\; \rm L[/tex] solution.)

Explanation:

The molarity of a solution gives the quantity of the solute in every unit volume of the solution. In this question:

Note that in this question, liter is the unit for the volume of the solution. The molarity of the solution should thus give the amount of solute in every liter of the solution:

[tex]\begin{aligned} c & = \frac{n(\text{solute})}{V(\text{solution})} \\ &= \frac{0.867\; \rm mol}{0.69\; \rm mol} \approx 1.3\; \rm mol \cdot L^{-1}\end{aligned}[/tex].

Answer:

b. Ag ( s )

d. Ni ( s )

[tex]E^0_{total}[/tex]  = 2.97 V

Explanation:

The reduction potentials for the given four (4) electrodes are:

In the first cell:

[tex]Ag^+ + e^- \to Ag \ \ \ \ E^0 = 0.80 \ V \\ \\ \\ Al^{3+} + 3e^- \to Al \ \ \ \ E^0 = - 1.66 \ V[/tex]

In the second cell:

[tex]Zn^{2+} + 2e^- \to Zn \ \ \ E^0 = -0.76 \ V \\ \\ \\ Ni^{2+} + 2e^- \to Ni \ \ \ E^0 =-0.25 \ V[/tex]

Since the cells are connected in series :

[tex]E_{total } > 0[/tex]

Thus; Metal plated in the first  cell = Ag

Metal plated in the second cell = Ni

The total potential [tex]E^0_{total}[/tex] = [tex]E^0 {cell \ 1} - E^0 _{cell \ 2}[/tex]

= (0.80 + 1.66 ) V - (0.25 +0.76 ) V

= 2.97 V

In the first cell, silver is plated and in the second cell, nickel is plated.

In a voltaic cell, there is the production of electrical energy via a chemical reaction. We have two cells;

In the first cell, silver is plated and the Ecell is 2.46 V while in the second cell, nickel is plated with Ecell of 0.51 V.

Learn more about voltaic cell: https://brainly.com/question/3930479

Answer:1.123 x 10^-31cm

Explanation:

mass of humming bird=  11.0g

speed= 1.20x10^2mph

but I mile = 1.6m

1km=1000

I mile = 1.6x10^3m

1.20x10^2mph= 1.6x10^3m /1mile x at 1.20 x 10^2

=1.932 x10^5m

recall that  

1 hr= 60 min

1 min=60 secs, 1hr=3600s

Speed = distance/ time

=1.932 x10^5 / 3600= 5.366 x 10 ^1 m/s

m= a 11.0g= 11.0 x 10^-3kg

h=6.626*10^-34 (kg*m^2)/s

Wavelength = h/mu

= 6.626*10^-34/(11 x 10^-3 x 5.366x 10^1)

6.63x10^-34/ 590.26x 10 ^-3= 1.123 x10^-33m

but 1m = 100cm

1.123 x 10 ^-33 x 100 = 1.123 x 10^-31cm

de broglie wavelength of humming bird = 1.123 x 10 ^-31cm

Answer

A. 8

Explanation:

The Atomic number is equal to the number of protons.

I took the test and got it right so this is 100% correct. It is NOT 18 like some people say

The atomic number of an oxygen atom with 8 protons is 8, regardless of the number of neutrons.

The atomic number of an atom is determined by the number of protons in its nucleus. This number also sorts elements into their correct position on the Periodic Table. Therefore, an oxygen atom with 8 protons will have an atomic number of 8, irrespective of the number of neutrons it has.

This is because neutrons do not influence the atomic number, only the atomic mass. So the correct answer to your question is: A. 8.

https://brainly.com/question/34726136

#SPJ6

Answer:

0.497 V

Explanation:

We need to apply the Nernst equation here. According to the Nernst equation;

Ecell= E°cell - 0.0592/n log Q

Where;

Ecell= emf of the cell under the given conditions

E°cell= standard emf of the cell

n= number of electrons transferred

Q= reaction quotient= [products]/[Reactants]= [Cr^2+]/[Fe^2+]

Balanced redox reaction equation; Cr(s)+Fe2+(aq)---------->Cr2+(aq)+Fe(s)

Values of standard electrode potential

Fe II: -0.44 V

Cr II: -0.91 V

E°cell= (-0.44) - (-0.99)

E°cell= 0.55V

[Fe2+ ]=0.0140M

[Cr2+ ]=0.862 M

Number of electrons transferred (n)= 2

Substituting into the Nernst's equation;

Ecell= 0.55- 0.0592/2 log [0.862]/[0.0140]

Ecell= 0.55 - 0.053

Ecell= 0.497 V

Answer:

See Explaination

Explanation:

We can define an oxidizing agent as a reactant that removes electrons from other reactants during a redox reaction. The oxidizing agent typically takes these electrons for itself, thus gaining electrons and being reduced. An oxidizing agent is thus an electron acceptor.

Please kindly check attachment for further solutions in details.

In this example, the strongest reducing agent is Aluminum (Al) and the strongest oxidizing agent is the dichromate ion (Cr₂O₇²¯). They both involve 6 electrons in their respective half-reactions. Balancing and summing these half-reactions give the net redox reaction.

To answer your experimental lab results query about redox reactions, we first identify our strongest oxidizing agent and reducing agent. An oxidizing agent is a substance that tends to oxidize other substances, meaning it is reduced. Conversely, a reducing agent reduces other substances while being oxidized itself.

Your strongest reducing agent might be represented by this half-reaction: 2Al(s) → 2Al³+ + 6e⁻, and your strongest oxidizing agent might be represented by: Cr₂O₇²¯ + 14H⁺ + 6e⁻ → 2Cr³+ + 7H₂0. Here, aluminum (Al) is losing electrons, so it's oxidized, and dichromate ion (Cr₂O₇²¯) is gaining electrons, so it's reduced.

So, identifying the number of electrons involved: Reducing half-reaction (Aluminum) = 6 electrons, Oxidizing half-reaction (Chromium) = 6 electrons. As the number of electrons in both half-reactions is equal, no multiplication is needed to balance them.

Now, combining these half-reactions to form the net redox reaction gives us: 2Al(s) + Cr₂O₇²¯ + 14H⁺ → 2Al³+ + 2Cr³+ + 7H₂0.

https://brainly.com/question/13978139

#SPJ3

Answer:

The volume of the basketball at 273 K is 6.461 L

Explanation:

When the gas temperature increases, the molecules move faster and take less time to reach the walls of the container. This means that the number of crashes per unit of time will be greater. That is, there will be an increase in the pressure inside the container and the volume will increase.

Charles's Law is a gas law that relates the volume and temperature of a certain amount of gas at constant pressure. So, the ratio between volume and temperature will always have the same value:

[tex]\frac{V}{T} =k[/tex]

In this case, you know:

Replacing:

[tex]\frac{7.1 L}{300K} =\frac{V2}{273 K}[/tex]

Solving:

[tex]V2=\frac{7.1 L}{300K} *273 K[/tex]

V2= 6.461 L

The volume of the basketball at 273 K is 6.461 L

According to Charles's law, the volume of a gas is directly proportional to its temperature at constant pressure. Using the formula V1/T1 = V2/T2, we can calculate the volume of the basketball at 273 K.

According to Charles's law, the volume of a gas is directly proportional to its temperature at constant pressure. We can use the formula V1/T1 = V2/T2 to solve this problem.

Given:

Using the formula, we can substitute the values and solve for V2:

V1/T1 = V2/T2

7.1 L / 300 K = V2 / 273 K

Cross multiplying, we get:

V2 = (7.1 L * 273 K) / 300 K

V2 = 6.46 L (rounded to two decimal places)

Answer:

I can provide a proper answer since there are no bonds specified.

Explanation:

Answer:

pH at the equivalence point for titration of HF and HCl will be basic and neutral respectively.

Explanation:

pH at equivalence point depends on hydrolysis equilibrium of conjugated base present in mixture.

[tex]\Rightarrow[/tex] Neutralization reaction: [tex]HF+OH^{-}\rightleftharpoons F^{-}+H_{2}O[/tex]

    Hence, at equilibrium, [tex]F^{-}[/tex] is present in mixture.

    Hydrolysis reaction: [tex]F^{-}+H_{2}O\rightleftharpoons HF+OH^{-}[/tex]

Here HF is an weak acid and [tex]OH^{-}[/tex] is a strong base, So, resultant pH of the           solution will be basic.

[tex]\Rightarrow[/tex] Neutralization reaction: [tex]HCl+OH^{-}\rightleftharpoons Cl^{-}+H_{2}O[/tex]

    Hence, at equilibrium, [tex]Cl^{-}[/tex] is present in mixture.

    Hydrolysis reaction: [tex]Cl^{-}+H_{2}O\rightleftharpoons HCl+OH^{-}[/tex]

Here HCl is a strong acid and [tex]OH^{-}[/tex] is a strong base, So, resultant pH of the           solution will be neutral.

Final answer:

At the equivalence point, titration of HCl with NaOH results in a neutral pH, while titration of HF with NaOH results in a basic pH.

Explanation:

To predict whether the pH at the equivalence point for each titration will be acidic, basic, or neutral, we need to consider the nature of the acid and base involved in the reaction. For the titration of a strong acid like hydrochloric acid (HCl) with a strong base like sodium hydroxide (NaOH), the equivalence point occurs at a pH of 7.00, resulting in a neutral solution. This is due to the formation of water from the neutralization reaction between HCl and NaOH.

However, for the titration of a weak acid like hydrofluoric acid (HF) with a strong base like NaOH, the equivalence point will be at a pH greater than 7, resulting in a basic solution. This occurs because the salt formed from the reaction of HF with NaOH gives a solution of sodium fluoride, NaF, which is basic due to the hydrolysis of F- anions in water.

Therefore, the pH of the equivalent point will be neutral for the titration of HCl with NaOH, and basic for the titration of HF with NaOH. The correct prediction for the titrations in question is that the equivalence point will be neutral for HCl and basic for HF.

Answer:

I THINK mechanical energy

Answer:

3 x 10^4

Explanation:

○ 2 x 10^1  = 20

○ 5 x 10^3  = 5,000

○ 3 x 10^4  = 30,000

○ 7 x 10^-6 = 7/1,000,000

Answer:

kpkgcv gvpspmspabfdpmt

Answer:

Exper

des

com

Explanation:

Final answer:

Experimental investigations focus on manipulating one variable and controlling others to determine effects, while descriptive investigations observe natural occurrences without manipulation. Field experiments modify a variable in a natural environment with some control over extraneous factors.

Explanation:

In scientific investigations, it is essential to understand the roles of different types of variables and controls. Experimental investigations allow for the control of variables to ensure that only one variable is manipulated, which is the independent variable. This isolation helps in distinguishing the direct effects of the manipulation on the dependent variable, which is being measured and recorded.

Field investigations provide an opportunity to study phenomena in a natural setting, where controlling all extraneous variables is not always feasible. However, field experiments can also be conducted where one independent variable is intentionally altered while attempting to control extraneous factors, thus achieving a balance between external and internal validity.

Lastly, there are observational studies or descriptive investigations which do not manipulate variables, but rather observe and record variables as they naturally occur. These are typically less expensive, less time-consuming, and can encompass a wide range of variables, although they often lack the control of experimental studies.

Logical steps to do the investigation involve identifying the independent, dependent, and controlled variables, establishing controls and a control group if applicable, and following an experimental procedure that ensures repeatability and reliability of the results.

Answer:

40g/mol

Explanation:

Step 1:

Data obtained from the question. This includes the following:

Volume (V) = 500mL = 500/1000 = 0.5L

Mass of gass = 1g

Temperature (T) = – 23°C = – 23°C + 273 = 250K

Pressure (P) = 105 KPa = 105/101.325 = 1.04 atm

Number of mole (n) =?

Gas constant (R) = 0.082atm.L/Kmol

Step 2:

Determination of the number of mole of the gas.

With the ideal gas equation, the number of mole of the gas can be obtained as follow:

PV = nRT

Divide both side by RT

n = PV / RT

n = (1.04 x 0.5)/(0.082 x 250)

n = 0.025mole

Step 3:

Determination of the molar mass of the gas:

This is illustrated below:

Mass of the gas = 1g

Number of mole of the gas = 0.025mole

Molar Mass of the gas =..?

Number of mole = Mass /Molar Mass

Molar Mass = Mass /number of mole

Molar Mass of the gas = 1/0.025

Molar Mass of the gas = 40g/mol

Therefore, the molar mass of the gas is 40g/mol

Answer: B) Mass Number

Answer:

C. Mass Number

Explanation:

took the test and got 100% so i know its right

Answer:

Water outside the cell will flow inwards by osmosis to attain equilibrium

Explanation:

In the hypotonic environment, the concentration of water is greater outside the cell and the concentration of solute is higher inside. A solution outside of a cell has a lower concentration of solutes relative to the cytosol.

If concentrations of dissolved solutes are greater inside the cell, the concentration of water inside the cell is correspondingly lower. As a result, water outside the cell will flow inwards by osmosis to attain equilibrium.

Osmosis is a process by which molecules of a solvent tend to pass from a less concentrated solution into a more concentrated one through a semipermeable membrane.

Answer:

3)They increase precipitation on the windward sides of mountain ranges

4)They force cool, moist air from oceans to rise as they move toward land

5)They decrease precipitation totals on the leeward sides of mountain ranges.

Explanation:

During the day, as the ocean becomes heated up, there is always an increase in humidity of the air that is above the oceans in coastal areas. But Because of the higher heat capacity of water compare to the land,the ocean always remain cooler compare to the land. But because of lower density,the air on the land is replaced by the ocean's cool air as the land's air increases.

Whenever a mountain inland come in contact with cool

air with humidity,the sir get more cool. However,. there result a condensation and precipitation of the water that is present in the air at the part of the mountain.

Answer:

3.They increase precipitation on the windward sides of mountain ranges.

4.They force cool, moist air from oceans to rise as they move toward land.

5.They decrease precipitation totals on the leeward sides of mountain ranges.

Explanation:

The temperature on mountains usually become colder with a corresponding higher altitude. The Mountains also tend to have more precipitation than areas without them.

This is because in the day the ocean becomes heated up. This leads to an increase in humidity of the air that is above the oceans in coastal areas. Due to the higher heat capacity of water compared to land ,the ocean always remains cooler when compared to the land. The lower density also allows the air on the land to be replaced by the ocean's cool air as the land's air increases.

They force cool, moist air from oceans to rise as they move toward land.They increase precipitation on the windward sides of mountain ranges.They decrease precipitation totals on the leeward sides of mountain ranges.

We calculated that after the 5.00 g of calcium oxide reacts with water to produce calcium hydroxide, the rest of the water left is 3.23g.

To solve this question, we first need to understand the stoichiometry of the reaction. The balanced equation clearly illustrates that one mole of calcium oxide (CaO) reacts with one mole of water (H2O) to form calcium hydroxide (Ca(OH)2). Therefore, this reaction is a 1:1 ratio.

Next, we need to convert the grams to moles. Since the molar mass of CaO is approximately 56.08 g/mol and H2O is 18.015 g/mol, we can calculate that 5.00 g of CaO is around 0.089 mol and 4.83 g of H2O is approximately 0.268 mol.

Considering the stoichiometry of the reaction, it is clear that not all of the water will react because it is present in excess. Only an amount equivalent to the moles of CaO will, so 0.089 mol of H2O will react. To convert this back to grams, simply multiply the moles of water reacted by the molar mass of water. This is approximately 1.60g.

Then, subtract the amount of water used in the reaction from the original amount to get the amount of water left. Hence, 4.83 g - 1.60 g = 3.23 g of water remain after the reaction is complete.

https://brainly.com/question/34137415

#SPJ3

Answer: Broad, flat teeth for grinding.

Explanation:

Bison are large herbivorous mammals. These belong to the family of Bovidae. They create habitat on the Great Plains and grassland for many different species. Bison are called a keystone species. As the bison forage they cause aeration of soil. This promotes plant growth. They have broad, and flat teeth which help them to grind food. These mammals appear in herd which helps in maintaining a balanced ecosystem.

Answer:

0.036 moles of gas are contained in 890.0 mL at 21.0 C and 0.987 atm

Explanation:

Ideal gases are those gases whose molecules do not interact with each other and move randomly.

An ideal gas is characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T). The relationship between them constitutes the ideal gas law, an equation that relates the three variables if the amount of substance, number of moles n, remains constant and where R is the molar constant of the gases:

P * V = n * R * T

where P represents the pressure of the gas, V its volume, n the number of moles of gas (which must remain constant), R the constant of the gases and T the temperature of the gas.

In this case:

Replacing:

0.987 atm* 0.890 L= n* 0.082 [tex]\frac{atm*L}{mol*K}[/tex] * 294 K

Solving:

[tex]n=\frac{0.987 atm*0.890 L}{0.082\frac{atm*L}{mol*K}*294K }[/tex]

n= 0.036 moles

0.036 moles of gas are contained in 890.0 mL at 21.0 C and 0.987 atm

Answer:

[tex]\Delta U = 244\,J[/tex]

Explanation:

The change in internal energy is given by the following expression:

[tex]\Delta U = n \cdot \bar c \cdot \Delta T[/tex]

[tex]\Delta U = (1\,mole)\cdot \left(24.4\,\frac{J}{mole\cdot K} \right)\cdot (10\,K)[/tex]

[tex]\Delta U = 244\,J[/tex]

Answer:

1. Mass of Carbon is 56.89g

2. Mass of Hydrogen is 6.33g

3. Mass of Oxygen is 75.88

Explanation:

The following were obtained from the question.

Mass of the compound = 139.1g

Mass of CO2 produced = 208.6g

Mass of H2O produced = 56.93

1. Determination of mass of Carbon (C). This is illustrated below:

Molar Mass of CO2 = 12 + (2x16) = 44g/mol

Mass of C = 12/44 x 208.6

Mass of C = 56.89g

2. Determination of the mass of Hydrogen (H). This is illustrated below:

Molar Mass of H2O = (2x1) + 16 = 18g/mol

Mass of H = 2/18 x 56.93

Mass of H = 6.33g

3. Determination of the mass of oxygen (O).

This is illustrated below:

Mass of the compound = 139.1g

Mass of C = 56.89g

Mass of H = 6.33g

Mass of O = Mass of compound - (mass of C + Mass of H)

Mass of O = 139.1 - (56.89 + 6.33)

Mass of O = 139.1 - 63.22

Mass of O = 75.88

Answer:

The Answer Is A. W: Fahrenheit Y: Kelvin X: Celsiuis

Answer:

a

Explanation:

The pressure exerted by 66.0 g of CO₂ gas at -14.5°C that occupies a volume of 50.0 L is 0.636 atm.

Pressure of any gas will be calculated by using the ideal gas equation as:

PV = nRT, where

P = pressure of gas = ?

V = volume of gas = 50L

R = universal gas constant = 0.082 L.atm/K.mol

T = temperature of gas = -14.5°C = 258.65 K

n is moles of gas and it will be calculated as:

n = W/M, where

W = given mass of CO₂ = 66g

M = molar mass of CO₂ = 44 g/mol

n = 66/44 = 1.5 moles

On putting values we get

P = (1.5)(0.082)(258.65) / (50)

P = 0.636 atm

Hence required pressure is 0.636 atm.

To know more about ideal gas equation, visit the below link:

https://brainly.com/question/24236411

To calculate the pressure exerted by a gas, we can use the Ideal Gas Law equation and convert the given values to the appropriate units. Then, plug these values into the equation to calculate the pressure.

To calculate the pressure exerted by a gas, we can use the Ideal Gas Law equation:

PV = nRT

Where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature in Kelvin. Rearranging the equation to solve for pressure, we have:

P = (nRT) / V

In this case, we are given the mass of CO2 gas (66.0 g), the volume (50.0 L), and the temperature in Celsius (-14.5°C). First, we need to convert the mass to moles using the molar mass of CO2.

Next, we need to convert the temperature to Kelvin by adding 273.15. Once we have the number of moles and the temperature in Kelvin, we can plug these values into the equation to calculate the pressure.

Answer:

1.496x 10^24photons

Explanation:

wavelength λ= 680 X10^-9 nm

h = planks constant - 6.636*10 ^-34js

c- speed of light - 3.0x 10^8 m/s

I mole of  Energy of NADP+ = 219Kj/mol

2 moles of  Energy of NADP+ = 2x 219= 438kj/mol = 438x10^3j

/mol

E= nhc/λ

438x 10^3j/mol -= n x (6.636*10 ^-34 x  3x10^8) / 680*10^-9

n=438x10^3j x 680x 10^-9/ (6.636*10 ^-34 x 3.0x10^8

1.496x 10^24photons

To make the reduction of 2 moles of NADP+ favorable for light absorbed at 680.000 nm, you would need a minimum of approximately [tex]6.35 x 10^{15[/tex] photons, which are particles of light.

The energy required for the reduction of 2 moles of NADP+ is given as 2 moles x 219 kJ/mol = 438 kJ. To calculate the number of photons needed, we can use the formula E = nhf, where E is the energy required, h is Planck's constant (6.626 x [tex]10^{-34[/tex] J·s), f is the frequency of light, and n is the number of photons. First, we need to convert the given wavelength to frequency using the speed of light (c =3 x[tex]10^8[/tex] m/s):

λ = 680.000 nm = 680.000 x [tex]10^{-9[/tex] m

f = c / λ = (3 x [tex]10^8[/tex] m/s) / (680.000 x [tex]10^{-9[/tex] m) ≈ 4.41 x [tex]10^{14[/tex] Hz

Now, we can calculate the number of photons (n) using the energy formula:

E = nhf

438,000 J = n(6.626 x [tex]10^{-34[/tex] J·s)(4.41 x [tex]10^{14[/tex] Hz)

Solving for n:

n ≈ 6.35 x [tex]10^{15[/tex] photons

So, approximately 6.35 x [tex]10^15[/tex]photons are needed to make the reduction of 2 moles of NADP+ favorable for light absorbed at 680.000 nm.

Learn more about particles here: https://brainly.com/question/32849607

#SPJ3

Answer:

The empirical formulae is C6H12S02

Explanation:

1. First we need to obtain the mass of each element in the sample and compound formed

Carbon = (62.637 mg * 12.011 g/mol / 44.009 g/mol) = 17.094 mg of Carbon

Hydrogen = ( 25.641 mg * (2 *1..008 g/mol) / 18.015 g/mol) = 2.869 mg of Hydrogen

Sulphur = (13.54 mg * 32.066 g/mol / 64.066 g/mol) = 6.777 mg of Sulphur

2. Next is to determine the percentage composition. Here we divide the respective mass by the mass of the sample

Carbon = 17.094 / 35.161 * 100 = 48.62 %

Hydrogen = 2.869/ 35.161 *100 = 8.16 %

Sulphur = 6.777/ 31.321 *100 = 21.64 %

Oxygen = (100 - (48.62 + 8.16 + 21.64)) = 21.58 %

3. Next is to divide the mass assuming there are 100 mg by the respective atomic masses to obtain the number of moles

Carbon = 48.62 / 12.011 = 4.048 mol

Hydrogen = 8.16 / 1.008 = 8.095 mol

Sulphur = 21.64 / 32.066 = 0.675 mol

Oxygen = 21.58 / 16.000 = 1.348 mol

Next is to divide by the smallest value

Carbon = 4.048/ 0.675 =5.997 = 6

Hydrogen = 8.095 / 0.675 =11.993 =12

Sulphur = 0.675/ 0.675 = 1

Oxygen = 1.348 / 0.675 = 1.997 = 2

So therefore the empirical formulae of the sample is C6H12SO2

Answer:

Q> Kp

The reaction of the system, will be a shift to the left, the side of the reactants.

Explanation:

Step 1: Data given

Kp = 2.4 * 10^-4

Partial pressure H2 =  0.111 atm

Partial pressure S2 =  0.051 atm

Partial pressure H2S = 0.566 atm

Step 2:  The balanced equation

2H2S(g) ⇌ 2H2(g) + S2(g)

Step 3: Calculate Q

Q = (pS2 * (pH2)²) / (pH2S)²

Q = (0.051 * 0.111²) / (0.566²)

Q = 0.00196 =1.96 *10^-3

Q> Kp

Since Q>K, we have more products than reactants (pressure). The reaction of the system, will be a shift to the left, the side of the reactants.

To compare the given conditions to the equilibrium conditions for the reaction, you calculate the reaction quotient (Qp) with the given pressures. Because Qp is less than Kp, the reaction isn't in equilibrium and will shift towards the products to get there.

To determine how these conditions compare to equilibrium conditions for the reaction 2H2S(g)⇌2H2(g)+S2(g), you first need to calculate the reaction quotient Qp at the given conditions. You use the equation Qp = [H2]^2*[S2]/[H2S]^2. Insert the given pressures into the equation, so Qp becomes (0.111)^2*(0.051)/(0.566)^2 = 1.13x10^-4.

Since Kp = 2.4*10^-4, and Qp < Kp, the system is not at equilibrium and the reaction will shift towards the products [H2] and [S2] in order to reach equilibrium.

https://brainly.com/question/3920294

#SPJ3

The strongest reducing agent Y2+ and the weakest reducing agent is X+.

The more positive the reduction potential of a specie is, the better it serves as an oxidizing agent and is better able to accept electrons. In a nutshell, the specie that has a higher positive reduction potential is a better oxidizing agent. The reducing agent is the specie that has the most negative reduction potential.

Looking the half reaction equations;

We can see that the strongest oxidizing agent is X+, the weakest oxidizing agent is Y2+, the strongest reducing agent Y2+ and the weakest reducing agent is X+.

Learn more: https://brainly.com/question/14191541

Final answer:

The strongest oxidizing agent is Y2+(aq), the weakest oxidizing agent is X+(aq), the strongest reducing agent is Z3+(aq), the weakest reducing agent is Y(s), and substances with a higher reduction potential than Z3+(aq) can oxidize Z.

Explanation:

The strongest oxidizing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the highest reduction potential is Y2+ → Y(s), with a reduction potential of -1.17 V. Therefore, Y2+(aq) is the strongest oxidizing agent.

The weakest oxidizing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the lowest reduction potential is X+(aq) → X(s), with a reduction potential of 1.52 V. Therefore, X+(aq) is the weakest oxidizing agent.

The strongest reducing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the highest reduction potential is Z3+(aq) → Z(s), with a reduction potential of 0.84 V. Therefore, Z3+(aq) is the strongest reducing agent.

The weakest reducing agent can be identified by looking at the reduction potentials of the half-reactions. The half-reaction with the lowest reduction potential is Y(s) → Y2+(aq), with a reduction potential of -1.17 V. Therefore, Y(s) is the weakest reducing agent.

Substances that have a higher reduction potential than Z3+(aq), which is 0.84 V, can oxidize Z.

Answer:pH = 2.96

Explanation:

C5H5N + HBr --------------> C5H5N+  + Br-

millimoles of pyridine = 80 x 0.3184 =25.472mM

25.472 millimoles of HBr must be added to reach equivalence point.

25.472  = V x 0.5397

V =25.472/0.5397= 47.197 mL HBr

total volume = 80 + 47.197= 127.196 mL

Concentration of [C5H5N+] = no of moles / volume=

25.472/ 127.196= 0.20M

so,

pOH = 1/2 [pKw + pKa + log C]

pKb = 8.77

pOH = 1/2 [14 + 8.77 + log 0.20]

pOH = 11.0355

pH = 14 - 11.0355

pH = 2.96

Final answer:

To calculate the pH at equivalence, we need to determine the concentration of pyridine and its conjugate acid. The pH at equivalence can be calculated using the Henderson-Hasselbalch equation, which relates the pH to the pKa and the concentration of the conjugate acid and base. The pKa value for the pyridinium ion can be determined by subtracting the pKb of pyridine from the pKw.

Explanation:

To calculate the pH at equivalence, we need to determine the concentration of pyridine and its conjugate acid. From the given information, we know that the initial volume of pyridine solution is 80.0 mL and its concentration is 0.3184 M. We also have the concentration of HBr solution, which is 0.5397 M. The reaction between pyridine and HBr is:

C5H5N (aq) + HBr (aq) → C5H5NH+Br- (aq)

This reaction forms the pyridinium ion (C5H5NH+) which is the conjugate acid of pyridine. At equivalence, the moles of pyridine and pyridinium ion are equal. Using the stoichiometry of the reaction, we can calculate the number of moles of pyridine:

Moles of pyridine = Volume of pyridine solution * Concentration of pyridine = 80.0 mL * 0.3184 M = 25.472 moles

Since the reaction is 1:1, the moles of pyridine also correspond to the moles of pyridinium ion. Therefore, the concentration of pyridinium ion is:

Concentration of pyridinium ion = Moles of pyridinium ion / Volume of pyridinium ion solution = 25.472 moles / 80.0 mL = 0.3184 M

Now, we can use the Henderson-Hasselbalch equation to calculate the pH at equivalence:

pH = pKa + log10 ([A-] / [HA])

Given that the pKb of pyridine is 8.77, we can determine the pKa of pyridinium ion:

pKa = 14.00 - pKb = 14.00 - 8.77 = 5.23

Substituting the values into the Henderson-Hasselbalch equation:

pH = 5.23 + log10 (0.3184 / 0.3184) = 5.23 + 0 = 5.23

Therefore, the pH at equivalence is 5.23.

Answer:

step 1 is trimolecular while step 2 is bimolecular.

Explanation:

Molecularity of an elementary reaction is defined the number of molecules that come together to react in a given elementary (single-step) reaction. It is equal to the sum of stoichiometric coefficients of reactants in that elementary reaction. Depending on the number of molecules that come together in an elementary step, a reaction can be designated as; unimolecular, bimolecular or trimolecular.

The kinetic order of any elementary reaction or reaction step is equal to its molecularity, and the rate equation of an elementary reaction can easily be determined by inspection, from the molecularity.

For a complex (multistep) reaction, the kinetic order of reaction is not determined from the molecularity since molecularity only describes elementary reactions or steps.

From our discussion above we can see that, step 1 is trimolecular while step 2 is bimolecular.