what will happen if you add more solute to a saturated solution

Answers

Answer 1
The solution will not be able to dissolve more solute beyond the saturated point, so when you are more solute to a saturated solution you will see that the solute will stay undissolved.
Answer 2
The solution will not be able to dissolve in the saturated solution.

Related Questions

The data from one particular experiment do not agree with a current theory. What is the next step?

Answers

Try to repeat the data from the experiment.

Answer:

The correct answer will be-repeat the data to verify and support the results.

Explanation:

The scientific theory is based on the repeated experiments which provide and support the theory.

If the data from the new experiment or any particular experiment does not support the theory then the step to be performed will be to repeat the experiment with the same protocol by different experimenters.

This repetition of the experiment increases the efficiency of the data and help determine whether the data can act as evidence of the theory or not.

Thus, repeat the data to verify and support the results is the correct answer.

what is 273 minus the boiling point of water?

Answers

Im guessing you are going in celsius so that would be 273-100 = 173 degrees celsius.

which of these is an example of food engineering

Answers

I don't know which ones r, could u add options, maybe?

Answer: Using fertilizer on crops to increase their yield

Explanation: Apex

After data are collected, they are often arranged in a(n)

Answers

the answer would be a table or spreadsheet

Three metal spoons are on table. They are at room temperature. If the three spoons touch.
A. Heat will flow among the three spoons
B. Heat will flow between two spoons
C. No heat will flow among the spoons
D. Heat will flow from the spoons to the air

Answers

If the spoons touch, no heat will flow among the spoons because they are already in thermal equilibrium with each other. This is hinted by the statement "they are at room temperature" which means they all have the same temperature. Heat only flows when there is a difference in temperature.
The answer will be C. No heat will flow among the spoons

®PLEASE MARK AS BRAINLIEST TO HELP ME LEVEL UP®

C. No heat will flow among the spoons

Within the atmosphere as the altitude increases?

Answers

Answer:

Within the atmosphere, as altitude increases,

A.air pressure stays the same.

B.air becomes heavier.

C.air pressure decreases.  The answer.

D.air pressure increases.

Explanation:

That's the question. AND Pressure with Height: pressure decreases with increasing altitude. The pressure at any level in the atmosphere may be interpreted as the total weight of the air above a unit area at any elevation. At higher elevations, there are fewer air molecules above a given surface than a similar surface at lower levels. Hope that helps. This means the answer is C.

Perspective influences how a person looks at a piece of art and its qualities.
a.
always true
c.
always false
b.
sometimes true
d.
Perspective is not relevant in the interpretation of art.


Answers

A. always true

Perspective is the way we see things. Each of us perceive the universe in a different way, and we form our opinions based on what we see.
The answer is A. Perspective always influences how a person looks at a piece of art and its qualities.


why is there a limited number of compounds that can be formed by the elements in the periodic table

Answers

if they weren't limited then it would make other elements rather than the element itself.

Final answer:

The limited number of compounds formed by elements is determined by their atomic structure, stability preferences, and the octet rule governing valence electrons, along with the fixed number of known elements (approximately 118). These factors lead to a finite, yet extensive, number of chemical bonds and stable compounds. The periodic table's organization reflects these bonding possibilities and limitations.

Explanation:

Why There is a Limited Number of Compounds

The reason there is a limited number of compounds that can be formed by the elements in the periodic table is due to the fixed set of elemental combinations governed by their atomic structures and bonding capabilities. For instance, the noble gas elements, which have eight valence electrons except for helium, do not form compounds easily, indicating high stability with full outer shells. This observation leads to the octet rule, suggesting that compounds often form because atoms seek the stability of a full valence shell comprising eight electrons.

Furthermore, the periodic table showcases a finite number of elements, with only about 118 known to us, resulting in a finite, although vast, number of possible combinations and chemical bonds. These limits are inherent to the properties of electrons and their configurations in atoms. As chemists, we observe that certain combinations of atoms form stable compounds while others do not, influenced by the electronic arrangement, chemical reactivity, and periodic trends.

The structure of the periodic table itself, which arranges elements by increasing atomic number and distinct chemical properties such as metallicity, governs how and which elements can combine. Therefore, even with millions of known compounds resulting from the combination of these elements, the intrinsic properties of elements and the laws of chemistry dictate the limits to the variety and types of bonds that can form robust compounds.

Reactions rates for reactions occurring in solution can be increased by increasing the concentration of the solution. With gases you can do something similar, which is to -

Answers

"Increase Pressure " is the right answer. if you need help , let me know

(science Q.1)
please help

Answers

pretty sure its 1 but I may not be correct.
the answer is 2.

3H2+N2=2NH3

Both white phosphorus and red phosphorus are made up only of phosphorus atoms.Does this mean they are both pure substances? Could they be compounds?

Answers

True, both of the red and white phosphorus is a pure substance.

Both red and white phosphorus is made of phosphor element but they have a different structure which causes them to have a different color. This phenomenon called allotropes when a chemical element has two or more different form.They are not compounds as they are only made of phosphorus. A compound should be made by at least two different elements.

Which of the following is true about two neutral atoms of the element zinc?
They will always have different masses. Electrons are missing in both the atoms. Both have an equal number of protons. They have different properties.

Answers

It isn't specified which neutral atom of zinc it pertains to. There are 5 stable isotopes of Zinc. It could be any of those. However, one thing is true for all possible conditions. These neutral atoms would have the same number of protons because they are of the Zinc element. It would always have 30 protons when neutral. So, the answer is: Both have an equal number of protons.

Final answer:

Neutral zinc atoms will always have the same number of protons, designated by the atomic number (Z) which is 30. While the number of neutrons can differ, creating various isotopes with different masses, the chemical properties of these isotopes are the same. Thus, the factual statement is that both atoms have an equal number of protons.

Explanation:

The question you've asked pertains to the nature of zinc atoms. Neutral atoms of zinc, like all other elements, will have the same number of protons, which is determined by the element's atomic number (Z). For zinc, the atomic number is 30, meaning that each zinc atom has 30 protons.

One of the key points to understand is that the number of neutrons can differ in atoms of the same element, leading to different isotopes of that element. This means that while the number of protons (and electrons in a neutral atom) remains constant, the number of neutrons can vary, affecting the mass number (A) of the isotopes. However, this does not change the chemical behavior of the isotopes since they still have the same number of protons.

Given these fundamental principles, let's review your statements about two neutral atoms of zinc:

They will not always have different masses since two neutral atoms of zinc can be the same isotope.Electrons are not missing in both the atoms if they are neutral; they will have the same number of protons and electrons.Both have an equal number of protons since this defines the element zinc.They do not have different properties simply because they are isotopes; isotopes of an element share similar chemical properties.    

Therefore, the correct statement regarding two neutral atoms of zinc is that both have an equal number of protons.

how many moles of glucose are contained in 8.3 x 10^21 molecules of glucose

Answers

approximitly 0.013787375 moles 

Final answer:

To find the number of moles of glucose from 8.3 x 10^21 molecules, divide by Avogadro's number (6.022 x 10^23), resulting in approximately 0.01378 moles of glucose.

Explanation:

To determine how many moles of glucose are contained in 8.3 x 1021 molecules of glucose, we must use Avogadro's number, which is 6.022 x 1023 molecules per mole. The calculation is as follows:

Number of moles = Number of molecules ÷ Avogadro's number

Number of moles = 8.3 x 1021 molecules ÷ 6.022 x 1023 molecules/mol

Number of moles ≈ 0.01378 moles

So, there are approximately 0.01378 moles of glucose in 8.3 x 1021 molecules of glucose.

what conditions are represented by the abbreviation stp

Answers

Hey there!

The acronym STP in chemistry stands for Standard Temperature and Pressure. At STP, the temperature will be 273.15 Kelvin (0°C or 32°F) and one mole of gas will occupy 22.4 liters of volume. Standard pressure is set at 1 atm. STP measurements are often used to solve the ideal gas formula (PV = nRT). 

Hope this helped you out! :-)
Final answer:

STP, or standard temperature and pressure, is defined as 0°C (273.15 K) and 1 atm pressure, allowing for standardized comparison of gas properties.

Explanation:

The conditions represented by the abbreviation STP, which stands for standard temperature and pressure, are specifically chosen to provide a reference point for the comparison of the physical properties of gases. Generally, STP is defined as a temperature of 0°C or 273.15 K and a pressure of 1 atm (atmosphere).

However, it is important to note that there are slight variations in this definition, as some organizations like the International Union of Pure and Applied Chemistry (IUPAC) define STP as 0.986 atm, while for simplicity, others may use the rounded value of 1 atm. Despite this, the concept of STP is invaluable for scientists as it allows for standardized comparisons across various gas measurements.

the molar mass of nitrogen gas is 28.0g/mol. A 100.0-g sample of air contains how many moles of nitrogen

Answers

Simply divide the total grams by how many grams there are in a mole and you will have how many moles you have

100g x 1 mol N2 / 28 grams = 3.57 moles N2

PLIZ ANSWER ASAP!!!!!!!!!!!!!!!!!!!!!!!!!
Which of the following is not an example of a molecule?
a)KOH b)H2S c)O3 d)Mn

Answers

The answer is Mn
Please mark as Brainliest!

Its mn i just did the test 2.10 molecules for good


Which of the following methods can be used to separate salt and iron? Distillation Evaporation Filtration Magnetism

Answers

since iron is magnetic your best choice would be to use magnetism.

From a mixture of salt and iron, iron can be easily separated using a magnet if they are present as solid fillings. Thus option D is correct.

What is magnetism?

Magnetism is the ability of a magnet to produce its own magnetic field and attracts magnetically susceptible objects into it. Iron is can acts as a magnet and it easily attracted by a magnet.

There are different methods for separating individual components from a mixture of them. The separation method is  selected based on the physical properties of these substances.

From a mixture of salt and iron, iron can be easily separated using a magnet and all the iron fillings can be collected on to a magnet. Remaining salt can then be purified by dissolving in water and then evaporates off. Hence, option D is correct.

To find more on magnetism, refer here:

https://brainly.com/question/2841288

#SPJ2

Which changes of the state takes place when an igneous rock turns into sedimentary rock?

Answers

All rocks on Earth take part in the "Rock Cycle". For an igneous or metamorphic rock to change into a sedimentary rock, they must undergo weathering and erosion by wind, water, and/or ice. The broken down pieces of rock (sediments) settle into layers that form a sedimentary rock.

Ethylene glycol is used as an antifreeze in car. if 400 g of ethylene glycol is added to 4.00 kg of water, what is the molaity? calcualte how much the freezing point of water will be lowered. The freezing point depression constant for water is Kf=-1.86

Answers

Data:

solute: ethylene glicol => not ionization

molar mass of ethylene glicol (from internet)  = 62.07 g/mol

solute  = 400 g

solvent = water = 4.00 kg

m =?

ΔTf = ?

Kf = 1.86 °C/mol

Formulas:

m: number of moles of solute / kg of solvent

ΔTf = Kf*m

number of moles of solute = mass in grams / molar mass

Solution

number of moles of solute = 400 g / 62.07 g/mol = 6.44 moles

m = 6.44 mol / 4 kg = 1.61 m <-------- molality (answer)

ΔTf = 1.86 °C / m * 1.61 m = 2.99 °C <---- lowering if freezing point (answer)

In a chemical reaction, which are the MOST LIKELY products of these reactants? 4Fe + 3O2 ?

Answers

I have the same question atm, but I'm pretty sure this is the answer.
I'm pretty sure we're combining these together to get a reactant, so if this is one of your answer choices chose 2Fe2O3, reason is when we add 4Fe + 3O2, we get the same answer, but in a different form.

Answer : [tex]Fe_2O_3[/tex] is the product.

Explanation :

Balanced chemical reaction : It is defined as the number of atoms of individual elements present on reactant side must be equal to the product side.

The species present on the left side of the right arrow are known as reactant and the species present on the right side of the right arrow are known as product.

When iron react with oxygen to give iron(III) oxide as a product.

The balanced chemical reaction will be,

[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]

In this reaction, [tex]Fe[/tex] and [tex]O_2[/tex] are the reactants and [tex]Fe_2O_3[/tex] is the product.

what are two ways non metalic minerals can be used?
A. Wiring and Gems
B. Conductors and for industrial purposes
C. Gems and as conductor
D. Industrial processes and gems

Answers

Hello There!

The correct answer has to be D. Industrial processes and gems. 

Hope This Helps You!
Good Luck :) 

- Hannah ❤
D. Industrial processes and gems

is your answer

hope this helps

What is the volume, in cubic centimeters, of a sample of cough syrup that has a mass of 50.0 g? The density of cough syrup is 0.950 g/cm^3

Answers

I thinks it's 47.3 cubic centimeters

30) Some common substances used in the laboratory are listed in the table. The chemical formulas of the substances are also listed beside their names.

How many of the listed items are elements?
A) 3
B) 4
C) 5
D) 6

Please Please Please hurry need help


Answers

C. 5. 
They are: Sulfur (S), Iron (Fe), Copper (Cu), Gold (Au), and Aluminum (Al). 

The answer is c 5



Bahafbssna

The empirical formula for a compound is CH2. If n is a whole number, which shows a correct relationship between the molecular formula and the empirical formula? 

Answers

An empirical formula is the "reduced" version of a molecular formula. For example, CH3 is the empirical formula for C2H6, C3H9, C4H12, and so forth. The difference in subscripts between an empirical formula and molecular formula is given by the constant n. If n is a whole number, this means the numerator is the molecular formula. So the answer is D. subscript of C in molecular formula = n  subscript of C in empirical formula. This can be rewritten as:

n = subscript of C in molecular formula/subscript of C in empirical formula

Calculate the vapor pressure lowering on an aqueous solution of glycerin that contains 180g of glycerin and 1000g of water at 25c. The vapor pressure of water at this temperature is 23.8torr.

Answers

The vapor pressure of a solvent is a colligative property. That means that it depends on the number of particles of the solvent in solution and not the nature of the solute dissolved.

You have to use Raoult's law, which states that the vapor pressure of a solution is equal to the vapor pressure of the pure solvent times the molar fraction of the solvent, i.e.:

     P = P°solv * X solv

X solv = number of moles of solvent / number of moles of solution

solvent = water

solute = glycerin

number of moles of water = mass of water / molar mass of water

number of moles of water = 1000 g / 18.02 g/mol = 55.49 mol

number of moles of glycerine = mass of glycerin / molar mass of glycerin

number of moles of glycerin = 180g / 92.09 g/mol = 1.955 mol

X solv = 55.49 mol / (55.49 mol + 1.955 mol) = 0.966

P = 23.8 torr * 0.966 = 22.99 torr = 23.0 torr

=> Vapor pressure lowering = 23.8 torr - 23.0 torr = 0.8 torr

Answer: 0.8 torr.

Which of the following is an adaptation found in many desert plants? A. large, flat leaves B. dormant period during the winter C. fuzzy growth on leaves D. wide-spreading, shallow roots

Answers

I'd say the answer is D because they need to intake and keep as much water as possible.
I say D wide spreading, shallow roots


Listed in the Item Bank are a number of key events from this field. Some events have more details available when you click on them. Drag and drop the events in chronological order by placing each in its corresponding open rectangle. If there is overlapping, simply trace the dashed line down to the timeline for clarification.
ITEMBANK: Move to Bottom
Brown recognizes and names the cell nucleusHooke coins the word cell after viewing cork cells with primitive microscopePasteur disproves spontaneous generation and proposes germ theorySchleiden & Schwann propose cell theoryVirchow describes cell division; proposes that all cells arise from other cellsvan Leeuwenhoek discovers bacteria with his improved microscope

Answers

Final answer:

The chronological order of key events in cell biology begins with Hooke's coining of 'cell' in 1665, followed by van Leeuwenhoek's discoveries related to bacteria in the 1670s, Brown's identification of the cell nucleus in 1831, Schleiden & Schwann's cell theory in 1838, Virchow's description of cell division in 1855, and Pasteur's germ theory later in the century.

Explanation:

The key events from the field of cell biology should be organized in the following chronological order:

Robert Hooke coined the term 'cell' in 1665 when he observed cork tissue under a microscope.

In the 1670s, Antonie van Leeuwenhoek improved upon the microscope and was able to discover bacteria and protozoa.

Much later in 1831, Robert Brown identified and named the cell nucleus.

In 1838, Schleiden & Schwann proposed the cell theory which states that all living organisms are composed of cells.

Rudolf Virchow in 1855 described cell division and proposed that all cells arise from other cells.

Finally, Louis Pasteur in the late 19th century disproved spontaneous generation and proposed the germ theory.

Learn more about Cell Biology here:

https://brainly.com/question/19138651

#SPJ12

Which of these is a example of a chemical reaction that occurs at a very fast rate

A.Rotting Wood

B.An Explosion

C.Photosynthesis

D.Iron Rusting

Answers

the answer would be B. An explosion in a chemical reaction that occurs quickly, rust and rotting wood are both chemical but take a long time.

Kaboom. an explosion, because since you lit the fuse, the sparks go off while the fuse get shorter and shorter and then when the use goes into the bomb itself, the Gunpowder Ignites really really fast causing pressure to become higher and higher causing the bomb itself to not contain it and so, it goes kaboom, and shrapnel, A bunch of small metal spikes, Go out in all directions.

So my answer is B: An Explosion. (You're welcome)

at a nuclear power plant plants a nuclear chain reaction releases heat which drives steam turbines that turn what

Answers

In a nuclear power plant, the heat from nuclear fission reactions converts water to steam, which then turns a turbine connected to a generator to produce electricity.

At a nuclear power plant, a controlled nuclear chain reaction takes place in the reactor core which releases a substantial amount of heat. This heat is utilized to convert water into steam. The high-pressure steam is then directed to drive a turbine, which, in turn, spins and activates a generator.

The generator is a crucial component as it is responsible for transforming the kinetic energy generated by the turning turbine into electrical energy which we use as electricity. Therefore, a nuclear chain reaction releases heat, which in turn generates steam driving a turbine that is ultimately connected to a generator for electricity production.

Which two structures would provide a positive identification of a plant cell under a microscope?
A: Cell wall,mitochondria
B: Plasma membrane , large central vacuole
C: Ribosomes, chloroplast
D: Cell wall, chloroplast

Answers

The correct answer is Chloroplast and the Cell wall.

The answer is D: Cell wall, chloroplast

How do I know? I took the same test before

and it was Cell wall, chloroplast. Hope you get an A!



Other Questions
Which of the following is NOT true about storage body fat? A. Storage body fat acts as an insulator to the body. B. Storage body fat helps increase the effects of aging. C. Storage body fat reduces the impact to internal organs during falls. D. Storage body fat is converted to energy when needed. What is the purpose of the document Can someone please help me answer this and explain if I chose the right answer? Because Im not sure if thats right or not Baron de Montesquieu primarily wrote about the idea of Bob is pulling a 30 kg filing cabinet with a force of 200 n, but the filing cabinet refuses to move. the coefficient of static friction between the filing cabinet and the floor is 0.80. what is the magnitude of the friction force on the filing cabinet? bob takes 4 apples and sarah eat 2 of his apples how many apples does bob have now ? Hope you guys can help me thank you! Help Dana find the sum 346 421 152 For numbers 13a-13d, select yes or no to tell Dana when to regroup During sleep, the body provides fuel to the brain during sleep, the body provides fuel to the brain by breaking down body proteins. by converting glucose to glycogen. the body does not provide fuel to the brain during sleep. by engaging in ketosis Are Higgins and Pickering the gentlemen that they appear to be? What are the four qualities of leadership that engender trust according to bennis and goldsmith? Mikos restaurant bill was $16. She used the expression 1.18(16) to find the total cost, including an 18% tip.Which expression is equivalent to the amount Miko paid?A.16 + 1.18B.(1+0.18)16C.16+0.18(16)D.1+0.18(16) Given the recent evidence suggesting that species change due to certain genetic mistakes, which of these is true? Darwin's theory of evolution was wrong.Natural selection cannot cause evolution.Mutation and natural selection both cause changes in a population.Changes in a population occur abruptly as a response to the environment. This involves Triangle Centroid. I really do not know how to set this up at all Why did some meccans not accept muhammad's teachings? A circle with a central that measures 1 has a radius of 10 inches. Find the length of the intercepted . for f(x) = 3x + 1 and g (x) = x^2 - 6 find (fog)(4) Which Group best describes the way Germany Became an Important industrial power during the 19th Century? Group A-Bismark invaded Russia and captured the coalfeilds-Germany harnessed its abundant hydroelectric power-Germany copied the English Inventions -Germany made powerful iron tools and machines.Group B-Bismark unified the German lands by going to war with france-Germany acquired territory rich in iron ore-France paid a hefty war fine and Germany invested the money in industrial production-Scientists and engineers developed many inventionsA. Group A B. Group B The term SI system refers to _____? Six people share 3/4 of peanuts equally. What fraction of a pound of peanuts does each person receive? Steam Workshop Downloader