According to the periodic table, the neutral atom of what element has 4 protons,5 neutrons,and 4 electrons
Since it has a 4 protons and 5 neutrons, it has a mass number of 9. The number of electrons is irrelevant for this question. Atomic number is the number of protons, so it is 4. So it is Beryllium
Answer:
Is your answer right or are you asking a question??
So2 (5.00 g) and co2 (5.00 g) were placed in a 750.0 ml container at 50.0 °c. the partial pressure of co2 in the container was __________ atm.
4.02 atm
Further explanationGiven:
SO₂ (5.00 g) and CO₂ (5.00 g) were placed in a 750.0 ml container at 50.0°C.
Question:
The partial pressure of CO₂ in the container was ... atm.
The Process:
This problem is only required to find the partial pressure of CO₂ in containers, so we ignore SO₂ in the calculation.
Step-1: preparing for the molar mass of carbon dioxide
Mr CO₂ = 12 + 2(16) = 44 g/mol
Step-2: find out the number of mole of CO₂
Mole conversions [tex]\boxed{ \ moles = \frac{mass}{Mr} \ }[/tex]
Therefore, moles of CO₂ = [tex]\boxed{ \ moles = 5.00 \ g \times \frac{1 \ mol}{44 \ g} \ } \rightarrow \boxed{ \ = 0.11364 \ moles \ }[/tex]
Step-3: find out the partial pressure of CO₂ (in atm)
We use an equation of state for an ideal gas:
[tex]\boxed{\boxed{ \ \frac{pV}{T} = nRT \ }}[/tex]
p = pressure (in atm) V = volume (in L) , i.e., 750.0 ml = 0.75 Ln = molesR = 0.0821 atm•L•mol⁻¹•K⁻¹ as the molar gas constantT = temperature (in Kelvin) , hence 50°C + 273 = 323 KPrepare p as the subject you want to find.
[tex]\boxed{ \ p = \frac{nRT}{V} \ }[/tex]
[tex]\boxed{ \ p = \frac{0.11364 \times 0.0821 \times 323}{0.75} \ }[/tex]
Thus the partial pressure of CO₂ in the container was 4.018 atm, rounded up to 3 significant digits, we get 4.02 atm.
- - - - - - - - - -
Learn more To what temperature would you need to heat the gas to double its pressure? https://brainly.com/question/1615346# Find out the total pressure in the container https://brainly.com/question/6854033Find out he molecular weight of a gas that has a density of 5.75 g/L at STP https://brainly.com/question/7497852Based on your observations in the virtual lab, complete the data table.
Question 3 options:
separated using a filter; mass
separated using a magnet; magnetism
separated using a filter; density
separated using a filter; not soluble in water
Sand was separated from the mixture using a filter because it is not soluble in water, making it a suitable method for separating insoluble solids from liquids.
Based on the provided information, let's analyze how the mixture of sand was separated and which physical property was used for the separation:
Mixture: Sand
How did you separate it?
Separated using a filter; not soluble in water.
Which physical property did you use to separate it?
The physical property used to separate sand from the mixture was "not soluble in water."
Here's the explanation:
Separated using a filter: This separation method suggests that sand was separated from the mixture by passing the mixture through a filter. The filter allows the liquid components of the mixture (if any) to pass through while retaining the solid sand particles.
Not soluble in water: This property indicates that sand doesn't dissolve in water. Since it doesn't dissolve, it remains as solid particles when mixed with water, allowing it to be separated by filtration.
So, the method used to separate the sand from the mixture was filtration, and the physical property applied was that sand is not soluble in water. This combination of properties makes it possible to separate sand from the mixture efficiently.
For more such information on: Sand
https://brainly.com/question/1429841
#SPJ12
Researchers have discovered that a moon rock brought back by the Apollo astronauts has a mass of 5.671 kg and a volume of 1,698 cm3. What is the density of the rock? Remember to use the correct number of significant digits in your answer. 3.3398 g/cm3 3.340 g/cm3 0.2994 g/cm3 3.3398 x 10-3 g/cm3
Answer:The density of the moon rock is [tex]3.3398 g/cm^3[/tex].
Explanation:
Mass of the moon rock = 5.761 kg = 5671 g
(1 kg = 1000 g)
Volume of the moon rock = [tex]1,698 cm^3[/tex]
[tex]Density=\frac{Mass}{Volume}=\frac{5761 g}{1,698 cm^3}=3.3398 g/cm^3[/tex]
The density of the moon rock is [tex]3.3398 g/cm^3[/tex].
Looking at the forward reaction, at what rate is equilibrium reached?
at 0.00 mol/min
at 0.25 mol/min
at 1.0 mol/min
at 0.5 mol/min
A compound is 80.0% carbon and 20.0% hydrogen by mass. assume you have a 100.-g sample of this compound. the molar mass of the compound was found to be 30.069 g/mol. what is the molecular formula?
Final answer:
To determine the molecular formula, calculate the moles of carbon and hydrogen from their masses, find the simplest whole-number ratio for the empirical formula (CH3), and then determine how many times the molar mass of the empirical formula fits into the molar mass of the compound to get C2H6.
Explanation:
The question involves determining the molecular formula of a compound from its percent composition by mass and its molar mass. Given that the compound is 80.0% carbon and 20.0% hydrogen by mass, and assuming a 100 g sample, we would have 80.0 g of carbon and 20.0 g of hydrogen. The molar mass of carbon is approximately 12.01 g/mol, and hydrogen is approximately 1.008 g/mol. Therefore, we can calculate the moles of carbon and hydrogen:
80.0 g C × (1 mol C / 12.01 g C) = 6.661 moles of carbon20.0 g H × (1 mol H / 1.008 g H) = 19.841 moles of hydrogenThe ratio of carbon to hydrogen moles is approximately 1:3. To determine the simplest whole-number ratio, we divide each by the smallest number of moles, which in this case is the moles of carbon, getting exactly 1 C and 3 H. This gives us the empirical formula CH3. To find the molecular formula, we divide the molar mass of the compound by the molar mass of the empirical formula:
Molar mass of CH3 = 12.01 g/mol + (3 × 1.008 g/mol) = 15.034 g/mol
Molecular formula determination:
30.069 g/mol (molar mass of compound) ÷ 15.034 g/mol (molar mass of empirical formula) = 2
Therefore, the molecular formula is C2H6, as we multiply the subscripts in the empirical formula by 2.
Which of these pairs of elements is most likely to be part of a polyatomic ion?
Cr and O
K and F
Li and Br
Mg and O
Cr and O are most likely to be part of a polyatomic ion.
Cr belongs to the transition metal series in the periodic table and has vacant d-orbitals. As a result it can exist in more than one oxidation state, the most common being +6, +3 and +2. Oxygen exists in -2 oxidation state. Hence, Cr and O can combine to form different polyatomic ions like: CrO₄²⁻ and Cr₂O₇²⁻ (Cr in +6 state)
K, Li and Mg exist in only one oxidation state +1 (K and Li) and +2(Mg). F and Br exhibit an oxidation state of -1. Therefore, they are not likely to form polyatomic ions.
Ans (a) Cr and O
A repetition of properties occurs when elements are arranged in order of increasing atomic number. read answer items for question 1
Answer:
Where is. Best of information
Explanation:
how did the electron change the model of an atom
In a molecule of _____, two electron dot structures describe the bonds equally well.
Magnesium reacts with hydrochloric acid, hcl, to produce hydrogen gas (hint: a diatomic molecule)and magnesium chloride. write a balanced equation for this reaction.
If 14.6 g of iron(iii) oxide (rust) is produced from a certain amount of iron, how many grams of oxygen are needed for this reaction?
To form 14.6 grams of iron(iii) oxide, or rust, about 4.4 grams of oxygen are required, based on the stoichiometry of the rust-forming reaction.
Explanation:The formation of rust, or iron(iii) oxide, involves the reaction of iron with oxygen. To determine the amount of oxygen needed for this process, we need to understand the stoichiometry of the reaction. Two moles of iron react with one mole of oxygen to produce two moles of iron(iii) oxide. The molar mass of iron (Fe) is approximately 56 g/mol, of oxygen (O) is about 16 g/mol, and Iron(III) Oxide (Fe2O3) is ~160 g/mol.
To calculate the grams of oxygen needed for 14.6 g of rust (Fe2O3), you first convert the given mass of iron(iii) oxide into moles, then use the stoichiometry of the reaction to determine how many moles of oxygen are required.
14.6g Fe2O3 * (1 mol Fe2O3/160 g) = 0.09125 mol Fe2O3
The reaction indicates that for every 1 mole of Fe2O3 produced, 1.5 moles of oxygen(O2) are needed. So:
0.09125 mol Fe2O3 * (1.5 mol O2/1 mol Fe2O3) = 0.137 mol O2
Finally, convert moles of oxygen into grams:
0.137 mol O2 * (32 g/mol) = approximately 4.4 grams
So, for 14.6g of Fe2O3 to form, around 4.4 g of O2 are needed.
Learn more about Chemistry here:https://brainly.com/question/13428382
#SPJ12
To produce 14.6 g of iron(III) oxide, approximately 4.39 grams of oxygen are needed. The nearest answer is option b. 4.4 g
The calculation involves converting grams to moles, using the stoichiometric ratio from the balanced equation, and then converting back to grams.
Each step uses the molar masses of the reactants and products.To determine how many grams of oxygen are needed for the reaction, we start with the balanced chemical equation for the formation of iron(III) oxide (rust):
4 Fe + 3 O₂ → 2 Fe₂O₃We know that 14.6 g of Fe₂O₃ is produced.
The molar mass of Fe₂O₃ is calculated as follows:
(2 x 55.85 g/mol Fe) + (3 x 16.00 g/mol O) = 111.7 g/mol Fe + 48.0 g/mol O = 159.7 g/mol Fe₂O₃Next, we convert 14.6 g of Fe₂O₃ into moles:
14.6 g Fe₂O₃ / 159.7 g/mol Fe₂O₃ ≈ 0.0914 mol Fe₂O₃According to the balanced equation, 2 moles of Fe₂O₃ are produced from 3 moles of O₂. Thus, the moles of O₂ needed are:
(3 moles O₂ / 2 moles Fe₂O₃) x 0.0914 mol Fe₂O₃ ≈ 0.1371 mol O₂Finally, we convert moles of O₂ to grams of O₂ using the molar mass of O₂ (32.00 g/mol):
0.1371 mol O₂ x 32.00 g/mol = 4.3872 g O₂Therefore, approximately 4.39 grams of oxygen are needed to produce 14.6 g of iron(III) oxide.
Correct question is: Consider the reaction 2Fe(s) + 30₂ (g) ► Fe₂O₃(g) . If 14.6 g of iron(III) oxide (rust) is produced from a certain amount of iron, how many grams of oxygen are needed for this reaction?
a. 1.85 g
b. 4.4 g
c. 3.74 g
d. 2.68 g
How many ml of 0.01-m naoh will be required to titrate 0.061-g of khp to it's endpoint?
Why can you separate isomers through distillation
Isomers can be separated through distillation because they often have distinct boiling points. Distillation processes, like simple and fractional distillation, leverage these differences to achieve separation, applying this principle widely in industrial applications.
Explanation:The question posed, why can you separate isomers through distillation, revolves around the foundational principles of physical chemistry and the separation of mixtures. Distillation is a technique that separates components of a mixture based on differences in their boiling points. Isomers, being different structural or spatial arrangements of the same molecular formula, can often have differing boiling points. This variance allows for the separation of isomers through distillation processes, such as simple distillation or fractional distillation.
Simple distillation is effective when the boiling points of the substances in the mixture have a wide gap (more than 150°C apart), primarily separating a more volatile substance from a less volatile one. Fractional distillation, on the other hand, is used for substances whose boiling points are closer together and relies on a fractionating column packed with material that provides a large surface area for multiple cycles of vaporization and condensation. This repeated process allows for finer separation of components, making it ideal for separating isomers with somewhat similar boiling points.
Distinct boiling points of isomers, hence, are the key reason why distillation can be used as a method of separation. This principle is widely applied in industries, for example, in the refining of crude petroleum or the production of alcoholic spirits, where the separation of components based on their boiling points is crucial.
Identify the spectator ions in this reaction:
H+ + Br – + K+ + OH– mc001-1.jpg K+ + Br– + H2O
A) H+ and K+
B) Br – and OH–
C) K+ and Br–
The spectator ions in this reaction is C) K⁺ and Br⁻
The spectator ions in the given reaction are K⁺ and Br⁻ because they remain unchanged on both sides of the equation.
In the given reaction :
H⁺ + Br⁻ + K⁺ + OH⁻ ----> K⁺ + Br⁻ + H₂OWe need to identify the spectator ions.
Spectator ions are ions that do not participate in the chemical change and remain unchanged on both the reactant and product sides of the equation.In this case, the K⁺ and Br⁻ ions appear on both sides of the reaction and remain unchanged. Therefore, they are the spectator ions.Thus, the correct answer is:C) K⁺ and Br⁻
A 3.677g sample of nac2h3o2 x 3h2o is heated until all the water molecules are gone. nac2h3o2 has mass of 2.216g left in the test tube. determine the ratio of moles of water to moles of nac2h3o2 in the original compound.
The mass of water was determined by subtracting the mass of anhydrous NaC2H3O2 from the hydrated sample. The moles of each component were calculated based on their molar masses, and the ratio of moles of water to moles of NaC2H3O2 was found to be approximately 3:1.
To determine the ratio of moles of water to moles of NaC2H3O2 in the original hydrated compound, we first need to find the mass of the water that was in the sample. We subtract the mass of the anhydrous NaC2H3O2 from the original mass of the hydrated sample:
Mass of water = 3.677g (original mass) - 2.216g (anhydrous NaC2H3O2) = 1.461g
Next, we calculate the moles of NaC2H3O2 using its molar mass (82.03 g/mol):
Moles of NaC2H3O2 = 2.216g / 82.03 g/mol ≈ 0.0270 moles
We do the same for the water using its molar mass (18.02 g/mol):
Moles of water = 1.461g / 18.02 g/mol ≈ 0.0810 moles
Finally, we find the ratio of moles of water to moles of NaC2H3O2:
Ratio = Moles of water / Moles of NaC2H3O2 ≈ 0.0810 moles / 0.0270 moles ≈ 3
Therefore, the ratio of moles of water to moles of NaC2H3O2 in the original compound is approximately 3:1.
The difference between a lamp and Tv using electrical energy
Final answer:
A lamp with an incandescent bulb is less efficient as it converts more electrical energy to heat, whereas a TV uses energy more effectively for display and sound. Employing more efficient lighting such as fluorescent or LED bulbs can significantly reduce energy usage and costs.
Explanation:
Differences in Electrical Energy Use Between Lamps and TVs
When comparing the use of electrical energy between different appliances such as a lamp and a TV, it is important to consider their power consumption and efficiency. A lamp, especially if it uses an incandescent bulb, tends to be less efficient as it loses most of its energy as heat rather than light. On the other hand, a TV is designed to convert electrical energy into both light (the visual part of the display) and sound, typically using the energy more efficiently regarding the provision of its intended service.
To reduce electrical energy consumption and its associated costs, one can switch from incandescent bulbs to fluorescent lights or LED lights, which are more efficient. Fluorescent lights are about four times more efficient than incandescent lights, and LEDs are even more efficient than CFLs. Considering that a significant percentage of energy use in homes and businesses goes to lighting, switching to more efficient lighting options presents a valuable opportunity for energy and cost-saving.
For example, one could replace a 60-W incandescent bulb with a 15-W CFL that provides the same brightness and color. This change not only reduces power consumption but also lowers heat transfer and environmental impact since CFLs have a longer lifespan. LED lights offer improvements over CFLs in both efficiency and lifespan, but their higher cost might be a barrier, although prices have been decreasing over time.
Fill in the coefficients that will balance the following:
_____Fe(HCO3)3+ _____CaO------> Fe2O3+_____Ca(HCO3)2
An imbalanced chemical equation describes the products and reactants of a chemical reaction. Therefore, the balanced equation is 2Fe(HCO[tex]_3[/tex])[tex]_3[/tex]+ 3CaO →Fe[tex]_2[/tex]O[tex]_3[/tex]+3Ca(HCO[tex]_3[/tex])[tex]_2[/tex].
What is balanced equation?A balanced equation is indeed a chemical reaction equation in which the overall charge and the amount of atoms for every element inside the reaction are the same for both the products and the reactants. In other terms, the mass as well as charge on the both sides of both the reaction are balanced.
An imbalanced chemical equation describes the products and reactants of a chemical reaction yet does not include the quantities needed to meet mass conservation.
Fe(HCO[tex]_3[/tex])[tex]_3[/tex]+ CaO →Fe[tex]_2[/tex]O[tex]_3[/tex]+Ca(HCO[tex]_3[/tex])[tex]_2[/tex]
The atom of Fe on reactant side is 1 while on product side it is 2
2Fe(HCO[tex]_3[/tex])[tex]_3[/tex]+ 3CaO →Fe[tex]_2[/tex]O[tex]_3[/tex]+3Ca(HCO[tex]_3[/tex])[tex]_2[/tex]
Therefore, the balanced equation is 2Fe(HCO[tex]_3[/tex])[tex]_3[/tex]+ 3CaO →Fe[tex]_2[/tex]O[tex]_3[/tex]+3Ca(HCO[tex]_3[/tex])[tex]_2[/tex].
To know more about balanced equation, here:
https://brainly.com/question/29769009
#SPJ2
What happens to the atomic radius when an electron is lost
Answer : When an electron is lost then the atomic radius is, decreases.
Explanation :
Atomic radius of an atom is defined as the total distance from the nucleus to the valence shell of the atom.
As moving from left to right in a period, more electrons are added in the same shell and the attraction between the last electron and nucleus increases, which results in the shrinkage of size of an atom.
Thus, atomic radii from the left to right across a period tend to decrease.
As moving from top to bottom in a group, there is an addition of shell around the nucleus and the outermost shell gets far away from the nucleus and hence, the distance between the nucleus and outermost shell increases.
Thus, atomic radii from the top to bottom in a group tend to increases.
When atom loses an electron then it becomes positively charged and the atomic radius of positively charged ion is lower than neutral atom.
When atom gains an electron then it becomes negatively charged and the atomic radius of negatively charged ion is more than neutral atom.
Hence, when an electron is lost then the atomic radius is, decreases.
How many grams of h2 gas can be produced by the reaction of 63.0 grams of al(s) with an excess of dilute hydrochloric acid in the reaction shown below? 2 al(s) + 6 hcl(aq) → 2 alcl3(aq) + 3 h2(g)?
To determine the grams of H2 gas produced from the given mass of Al, we use stoichiometry and the molar mass of H2.
Explanation:To determine the number of grams of H2 gas that can be produced, we need to use the given information about the mass of Al and the balanced chemical equation.
First, we calculate the number of moles of Al by dividing the mass of Al by its molar mass. Then we use the stoichiometric ratio from the balanced equation to find the moles of H2 gas produced. Finally, we convert moles of H2 gas to grams using the molar mass of H2.
By following these steps, we can calculate the grams of H2 gas produced from the given mass of Al.
Learn more about stoichiometry here:https://brainly.com/question/30218216
#SPJ12
By reacting 63.0 grams of Al with excess hydrochloric acid, approximately 7.07 grams of H₂ gas will be produced.
This is based on stoichiometric calculations using a balanced chemical equation.
The steps include converting Al to moles, using the mole ratio, and then converting to grams of H₂.To determine the number of grams of H₂ gas produced, we first need to use stoichiometry based on the balanced chemical equation: 2 Al(s) + 6 HCl(aq) → 2 AlCl₃(aq) + 3 H₂(g)Given that we have 63.0 grams of Al, we start by converting this mass to moles:
Step 1: Calculate moles of Al
Mol mass of Al = 27.0 g/molMoles of Al = 63.0 g / 27.0 g/mol = 2.33 molStep 2: Use the mole ratio to find moles of H₂ produced
From the balanced equation, 2 moles of Al produce 3 moles of H2Moles of H₂ = 2.33 mol Al (3 mol H2 / 2 mol Al) = 3.495 mol HStep 3: Convert moles of H₂ to grams
Molar mass of H₂ = 2.0 g/molMass of H₂ = 3.495 mol * 2.0 g/mol = 7.07 gTherefore, 6.99 grams of H₂ gas can be produced by reacting 7.07 grams of Al with an excess of dilute hydrochloric acid.
Correct question is: How many grams of H₂ gas can be produced by the reaction of 63.0 grams of Al(s) with an excess of dilute hydrochloric acid in the reaction shown below?
2 Al(s) + 6 HCl(aq) → 2 AlCl₃(aq) + 3 H₂(g)
IS Typtophan an element on the periodic table?
All of the atoms of argon have the same
In a compound that contains monatomic ions, which of the following gets named first?
Question 5 options:
the roman numeral of the valence number
the nonmetal
the anion
the metal
Answer:
It's the metal that gets named first.
Explanation:
Compounds are named based on the ions they produced on dissolution. In a compound that contains monatomic ions, the metallic ion is a named first. Thus 4th option is correct.
What is monoatomic ion?A monatomic ion is a single atom possessing a positive charge or negative charge. The ion bearing a positive charge is called cation and the ion bearing negative charge is called anion.
Cations are formed by the losing or donation of electrons. Whereas, anions are formed by withdrawal of electrons. For example Na+ is a cation and Cl- is an anion formed by losing of one electron from sodium metal and accepting an electron Cl gas respectively.
These single atomic cation and anions together forms ionic compounds called monatomic ions. For example NaCl containing sodium ion and chloride Cl- ion is a monatomic ion and its name is started with the metal sodium namely sodium chloride.
Similarly HBr containing H + ion and Br- ion have the name hydrogen bromide. Therefore, the metal named first for a compound containing monatomic ions.
To refer the more about monatomic ion, refer the link below:
https://brainly.com/question/9384283
#SPJ2
What supports Wegener's theory of the continental drift?
A.Different continents had different rock types
B.The earths rotation could provide enough force to move continents apart
C.Identical fossils were found on continents that were far apart
D.Each continent had mountain ranges
C) just took test please make brainiliest
Different continents had different rock types supports Wegener's theory of continental drift. Therefore, option (A) is correct.
What is Wegener's theory of continental drift?According to Wegener’s Continental Drift theory, all the continents were united as one single continental mass named a Super Continent, and Pangaea and a Mega Ocean surrounded this supercontinent.
The similarity in geological formations of the southern continent had led Roberto Mantovani that all the continents had once been joined into a supercontinent. Then Wegener noted the similarity between Mantovani's and his own maps of the previous positions of the southern continents.
In Mantovani's conjecture, the continent split due to volcanic activity led by thermal expansion, and the newly formed continents drifted away from each other due to further expansion of the rip zones, where the oceans presently lie.
The continents were separated by the centrifugal pseudo force of the rotation of the earth but calculations showed that the force was not sufficient.
Learn more about continental drift, here:
https://brainly.com/question/15122129
#SPJ5
A solution is prepared by adding 0.400 g of solid nacl to 50.0 ml of 0.100 m cacl2. what is the molarity of chloride ion in the final solution? assume that the volume of the final solution is 50.0 ml. a solution is prepared by adding 0.400 g of solid to 50.0 ml of 0.100 m . what is the molarity of chloride ion in the final solution? assume that the volume of the final solution is 50.0 ml. 0.108 0.137 0.208 0.237 0.337
add them all together then divide it by the amount that Is their
The molarity of chloride ions in the final solution is equal to 0.156 M.
What is the molarity?Molarity can be defined as the concentration of the solution in terms of moles of solute and volume of solution in liters.
Given the solution of calcium chloride:
[tex]CaCl_2 \longrightarrow Ca^{2+} + 2Cl^{-}[/tex]
Given the molarity of calcium chloride = 0.1 M
The concentration of chloride ions in the solution = 2×0.1 = 0.2 M
The volume of solution, V = 50 ml = 0.05 L
The number of moles of chloride = 0.2× 0.05 = 0.001 mol
Amount of NaCl added in the solution = 0.400 g
The number of moles of chloride from NaCl = 0.4/58.5 = 0.0068 mol
Total number of moles of chloride ions = 0.001 + 0.0068 = 0.0078 mol
Volume of the whole solution = 50 ml = 0.05 L
The molarity of the chloride ions in the final solution:
M = 0.0078/0.05
Molarity = 0.156 M
Learn more about molarity, here:
https://brainly.com/question/8732513
#SPJ5
Group 7 on the periodic table are called halides. if you decided to do a taste test on all of those elements, what would they probably taste like
The chemistry lab is 0.3394km from the nurses office. How many feet is the distance?
Distance is the measurement that defines the length of the points covered by the object. The chemistry lab is 1113.51706 feet from the nurse's office.
What is the distance?Distance is said to be the measurement that defines how far an object has moved from its initial point at the given time. It is an interval and span between the two defined points.
In physics, distance is estimated and measured in kilometers, meters, centimeters, inches, feet, miles, and yards. They are units of length as the distance is said to be the length between two points.
It has been known that one kilometer contains 3280.84 feet.
Given,
Distance between chemistry lab and nurse office = 0.3394 km
Converting the values from km to feet as:
1 km = 3280.84 feet
0.3394 km = 0.3394 km × 3280.84 feet
= 1113.51706 feet
Therefore, the distance is 1113.51706 feet.
Learn more about distance, here:
https://brainly.com/question/13131508
#SPJ2
Fill in the coefficients that will balance the following reaction:
_____Hg(CO3)2+______AgCl---> ______HgCl4+______Ag2CO3
The hydrogens and oxygen of a water molecule are held together by ______ bonds.
a.electron
b.hydrogen
c.covalent
d.osmotic
The photoelectric effect is the basis for how solar energy panels work today.
Select one:
True
False
Final answer:
The photoelectric effect is indeed fundamental to how solar energy panels operate by using the energy of sunlight to eject electrons in a photovoltaic cell, creating electrical current that can be used as power. True
Explanation:
The photoelectric effect is indeed the basis for how solar energy panels, also known as photovoltaic cells, work today. When photons from sunlight strike the surface of a solar cell, they may have sufficient energy to eject electrons from the material of the cell, typically a semiconductor like silicon. This creates free electrons and corresponding holes. If there is an electrical circuit connected, these free electrons will flow through the circuit, thereby generating an electric current. This electric current can then be harnessed and used to power electrical devices or feed into the electrical grid.
It's important to note that the exact mechanism in solar cells is a bit different from the classic photoelectric effect observed in metals because semiconductors have a band gap that must be overcome by the incoming photons. This process is often referred to as the photovoltaic effect, which is closely related to the photoelectric effect as described by Albert Einstein.