Astronauts must have their own supply of oxygen in their spacesuits during spacewalks due to the absence of breathable air in the vacuum of space, and to protect them from harmful solar radiation and the extreme temperatures of space. The suits also maintain positive pressure relative to the outside to prevent air from the vacuum of space from entering the suit if a leak occurs.
Explanation:Astronauts must have their own supply of oxygen within their spacesuits during spacewalks because outer space does not have an atmosphere like the Earth which contains beneficial and breathable air; instead, space is a vacuum. This absence of atmosphere leaves astronauts exposed to the direct speed and force of solar radiation which can be harmful and potentially lethal. Their spacesuits, equipped with their own oxygen supply, not only enable astronauts to breathe but also serve as a barrier to protect them from this radiation and the extreme temperatures of space. The suit also maintains a positive pressure relative to the outside, ensuring that if a leak occurs, air will flow out of the suit, not into it from the vacuum of space.
Learn more about Spacesuits and Oxygen Supply here:https://brainly.com/question/16514662
#SPJ12
A softball player steals second base while rubbing at her top speed of 4.2 m/s in 1.75 seconds. What is her acceleration?
13 Points!!
Answer:
2.4m/s^2
Explanation:
To find the acceleration you divide velocity by the time.
Answer the 3 questions at the bottom, and this is about Newton’s 1st Law of Motion.
10 Points!!!!!
A science teacher ran a marathon. After the race she showed her students the silver blanket she was given to keep her warm.A group of students investigated how the colour of the blanket affected how much infrared radiation is absorbed
Answer:
In summary the blanket that is metallic reflects electromagnetic waves
Explanation:
The teacher running the marathon generates a quantity of heat that the body must release to keep its temperature constant, one of the ways to release this energy in the form of electromagnetic radiation in the infrared range.
The matte with is silver should be metallic, so it reflects light at all wavelengths, so that the infrared light returns to the body and decreases the radiation radiation emitted, thus keeping it warmer.
In summary the blanket that is metallic reflects electromagnetic waves
Which kind of wave interaction is shown?
A. Absorbtion
B.diffraction
C.refraction
D. Reflection
Answer:diffraction
Explanation:
If 20 J of work is done in 4 seconds, what is the power?
When 20 J of work is done in 4 seconds, the power is 5 watts
Power is the rate at which work is done, expressed in watts.
In this case, if 20 J of work is done in 4 seconds, the power can be calculated as follows:
Power = Work done / Time taken
Power = 20 J / 4 s
= 5 watts
Uranus is a pale green planet, with 27 satellites and several rings.
True or False
P.S what subject would this be
Hi,
All of it is true. :
Uranus is a pale green planet, with 27 satellites and several rings.
The areas in which the individual magnetic orientations of atoms line up are called
Answer:
Magnetic domains
Explanation:
The areas in which the individual magnetic orientations of atoms line up are called magnetic domains.
In most magnetic materials, atoms are arranged in such a way that the magnetic orientation of one electron cancels out the orientation of another
In magnetic domain electrons have the same magnetic orientation. This means that the individual magnetic moments of the atoms are aligned with one another and they point in the same direction.
Inside a television picture tube there is a build-up of electrons (charge of 1.602 × 10–19 C) with an average spacing of 38.0 nanometers between electrons. Find the electric field inside the picture tube. (Round to three significant figures.)
Answer:
Electric field, [tex]E=9.97\times 10^5\ N/C[/tex]
Explanation:
We have,
Charge on electron is [tex]1.602\times 10^{-19}\ C[/tex]
Distance between electron is 38 nm.
It is required to find the electric field inside the picture tube. The electric field at a distance r is given by :
[tex]E=\dfrac{kq}{r^2}\\\\E=\dfrac{9\times 10^9\times 1.6\times 10^{-19}}{(38\times 10^{-9})^2}\\\\E=9.97\times 10^5\ N/C[/tex]
So, the electric field inside the picture is [tex]9.97\times 10^5\ N/C[/tex]
Answer:
997,000
Explanation:
just did the assignment for electric fields, grade 10. have a nice day :)
Which box depicts the tissue level of organization?
A) P
B) Q
C) R
D) S
Light waves can be reflected, refracted and absorbed. Which of the following is an example of light waves being absorbed?
A.
A ray of light travels from the Sun to Earth's atmosphere.
B.
A magnifying lens increases the image size of a penny.
C.
A road's black pavement becomes hot in the sunlight.
D.
A mirror changes the direction of a light ray.
STUDY ISLAND
Answer:
C
Explanation:
Big Brain ;3
Final answer:
Black pavement becoming hot in the sunlight is an example of light waves being absorbed, as the pavement captures the light's energy, converting it into heat.
Explanation:
When light travels from one medium to another, some of the light is transmitted, some is reflected, and some is absorbed. An example of light waves being absorbed is when a road's black pavement becomes hot in the sunlight. This absorption happens because the pavement captures the energy of the light waves, converting it to heat, which makes the pavement hot. This process is why black-coloured surfaces heat up more in the sunlight than lighter-coloured surfaces, due to their higher absorption capacity.
What is the speed of light across space?
Answer:
299,792 kilometers per second.
Explanation:
Hope I helped ya.
< Sarah >
Answer: 300 million meters per second
Explanation:
Srry if I'm wrong
What kind of mirrors are typically used for security purposes?
O A. diverging
B. convex
O C. converging
D. concave
Convex Mirrors are the mirrors that are used for security purposes.
What kind of mirrors are typically used for security purposes?Convex Mirrors are the type of mirrors that are used in road safety, security and observation applications. For example, convex security mirrors act as effective deterrents when used in shops and convex safety mirrors help to avoid collisions.
So we can conclude that Convex Mirrors are the mirrors that are used for security purposes.
Learn more about mirror here: https://brainly.com/question/1908648
#SPJ1
The Convex mirror is the mirror that is generally used for security purposes (Option A and B).
What is a mirror?The term mirror refers to any reflecting surface. There are different kinds of curved mirrors such as;
parabolic mirrorConcave mirrorConvex mirrorThe Convex mirror is used for security purposes because they help to magnify the image and broaden the scope of view allowing the store attendants to see better.
Lean more about convex mirrors:https://brainly.com/question/3359672
#SPJ1
Look of the diagram below. What condition does this show?
Enter your answer
Answer:
hypermetropia
Explanation:
long-sightedness.
A 0.4 kg ball is thrown straight up into the air with a velocity of 12.2 m/s. What maximum height will it reach?
Answer:
Maximum height is 7.59 m.
Explanation:
We have,
Mass of a ball is 0.4 kg
It is thrown straight up into the air with a velocity of 12.2 m/s.
It is required to find the maximum height reached by the ball.
Concept used : Law of conservation of energy.
Solution,
Here, the energy of the ball remains conserved. Let h is the maximum height reached by the ball such that,
[tex]\dfrac{1}{2}mv^2=mgh\\\\h=\dfrac{v^2}{2g}\\\\h=\dfrac{(12.2)^2}{2\times 9.8}\\\\h=7.59\ m[/tex]
So, the maximum height reached by the ball is 7.59 m.
Who is good in physics??
Answer:
joe
Explanation:
mama
The magnitude and direction exerted by two tugboats towing a ship are 1620kilograms, N35degreesW,and 1250kilograms, S50degreesW,respectively. Find the magnitude, in kilograms, and the direction angle, in degrees, of the resultant force.
Answer:
Magnitude (in kilogram) of the resultant force, [tex]|M| = 1958.53 kg[/tex]
Direction = 164.37°
Explanation:
The two forces exerted by the two tugboats are non zero vectors, therefore they can be expressed as:
For the 1620 kg tugboat in the direction N35degreesW
[tex]M_{1} = 1620 cos \theta_1 i + 1620 sin \theta_1 j\\[/tex]
The direction of the force from the positive x - axis, [tex]\theta_1 = 90 - 35 = 55^{0}[/tex]
The equation above then becomes:
[tex]M_{1} = 1620 cos 55 i + 1620 sin 55 j\\ M_{1} = (1620 * 0.57) i + (1620*0.82) j\\M_{1} = 923.4 i + 1328.4j[/tex]
For the 1250 kg tugboat in the direction S50degreesW
[tex]M_{2} = 1250 cos \theta_2 i + 1250 sin \theta_2 j\\[/tex]
The direction of the force from the positive x - axis,
[tex]\theta_2 = - (90 - 50) = - 40^{0}[/tex]
The equation above then becomes:
[tex]M_{2} = 1250 cos(-40) i + 1250 sin (-40) j\\ M_{2} = (1250 * 0.77) i - (1250*0.64) j\\M_{2} = 962.5 i - 800j[/tex]
The resultant vector will be given by:
[tex]M = M_{1} + M_{2} \\ M = 923.4 i + 1328.4j + 962.5 i - 800j\\M = 1885.9i + 528.4j[/tex]
The magnitude of the resultant is given by:
[tex]|M| = \sqrt{1885.9 ^{2} + 528.4^2 } \\|M| = \sqrt{3556618.81 + 279206.56}\\|M| = \sqrt{3835825.37} \\|M| = 1958.53 kg[/tex]
The direction will be given by :
[tex]cos \theta = \frac{a}{|M|} \\cos \theta = \frac{1885.9}{1958.53}\\cos \theta = 0.963\\\theta = cos^{-1} 0.963\\\theta = 15.63^0[/tex]
Direction = 180 - 15.63 = 164.37°
what is the distance between two spheres, each with a charge 2.5x10-6 C when the force between them is 0.50 N
Answer:
The distance between charges is 0.33 m.
Explanation:
We have,
The charge on each sphere is [tex]2.5\times 10^{-6}\ C[/tex]
Force between charges is 0.5 N
It is required to find the distance between spheres. The force between two charges is called electrical force. The force between them is given by :
[tex]F=\dfrac{kq^2}{r^2}[/tex]
r is distance between charges
[tex]r=\sqrt{\dfrac{kq^2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times (2.5\times 10^{-6})^2}{0.5}} \\\\r=0.33\ m[/tex]
So, the distance between charges is 0.33 m.
Final answer:
To find the distance between two spheres with identical charges of 2.5×10-6 C experiencing a 0.50 N force, use Coulomb's Law and rearrange it to solve for the distance, which is the square root of the product of Coulomb's constant, the magnitude of the charges, divided by the force.
Explanation:
The distance between two spheres, each with a charge of 2.5×10-6 C, when the force between them is 0.50 N, can be calculated using Coulomb's Law. The formula for Coulomb's Law is F = k × (|q1×q2|) / r2, where F is the force between the charges, k is Coulomb's constant (approximately 8.99×109 N·m2/C2), q1 and q2 are the charges, and r is the distance between the centers of the two charges.
By rearranging the formula to solve for r, we get r = √(k × (|q1×q2|) / F). Plugging in the values we have:
k = 8.99×109 N·m2/C2q1 = 2.5×10-6 Cq2 = 2.5×10-6 CF = 0.50 NThe charge on each sphere is 2.5* 10^(-6)\ C
Force between charges is 0.5 N
It is required to find the distance between spheres. The force between two charges is called electrical force. The force between them is given by :
F=(kq^2)/(r^2)
r is distance between charges
r=\sqrt{(kq^2)/(F)} \n\nr=\sqrt{(9* 10^9* (2.5* 10^(-6))^2)/(0.5)} \n\nr=0.33\ m
So, the distance between charges is 0.33 m.
1. How much work is done on a stalled car if a man pushes with a Force of 3500 N and
moves the vehicle forward 10 m ?
Answer:
35000
Explanation:
Since work is force times distance, W = F x D all you have to do is multiply the force: 3500N times the distance: 10m and you get 35000
Hope this helped and pls mark as brainliest!
~Luna
Which of the moon’s properties prevents it from being pulled inward by earth?
Answer:
Inertia
Explanation:
Inertia is the inherent property of an object to remain in its state of rest or motion without being disturbed.
Answer:
inertia
Explanation:
What is the law of conversation of energy?
Answer:
the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time
Explanation:
why are electrical outputs from a turbine generator highest during spring tide
Answer:
A
Explanation:
because if the tides come in faster that means that more energy could be harnessed.
1) My 14V car battery could be used to charge my laptop, but I need to use an inverter to first convert it to a standard 120V. Then my laptop charge cord has a resistor inside which ensures that 1.6A of current flow through to the laptop. What is the resistance in the charge cord?
2) My laptop charge cord actually has another inverter inside tat converts the electricity to 19.5V and 3.33A. What is the resistance in the cord that accomplishes this?
Answer:
1) Charge chord resistance is 75 Ω
2) Charge chord resistance is 6.33 Ω
Explanation:
1) To answer the question, we note that the the formula voltage is found as follows;
V = IR
Therefore,
[tex]R = \frac{V}{I} = \frac{120}{1.6} = 75 \, \Omega[/tex]
2) Where the voltage, V = 19.5 V and the current, I = 3.33 A, we have;
Initial resistance R₁ = 19.5 V/(3.33 A) = 5.86 Ω
However, to reduce the current to 1.6 A, we have;
[tex]R_T = \frac{19.5}{1.6} = 12.1875 \ \Omega[/tex]
Therefore, where the resistance is found by the sum of the total resistance we have;
[tex]R_T[/tex] = R₁ + Charge chord resistance
∴ 12.1875 = 5.86 + Charge chord resistance
Hence, charge chord resistance = 6.33 Ω
(1) The resistance in the charge cord at the given standard voltage is 75 ohms.
(2) The resistance in the cord that accomplishes the given voltage and current is 6.33 ohms.
The given parameters;
voltage of the car battery, V = 14 Vstandard voltage, = 120 Vcurrent in the laptop charger, I = 1.6 AThe resistance in the charge cord at the given standard voltage is calculated as follows;
[tex]V = IR\\\\R = \frac{V}{I} \\\\R = \frac{120}{1.6} \\\\R = 75 \ ohms[/tex]
The initial resistance when the voltage is 19.5 V and current is 3.33 A;
[tex]R = \frac{V}{I} \\\\R = \frac{19.5}{3.33} \\\\R = 5.86 \ ohms[/tex]
The total resistance when the current in cord is calculated as;
[tex]R = \frac{V}{I} \\\\R = \frac{19.5}{1.6} \\\\R = 12.19 \ ohms[/tex]
The internal resistance is calculated as;
[tex]r = 12.19 - 5.86\\\\r = 6.33 \ ohms[/tex]
Learn more here:https://brainly.com/question/21369482
At 20°C, a length of copper wire has a resistance of 10.0 Ω What is its resistance when the wire is heated to 65°C? Let α = 0.004 at 20°C. Show all work and include units of measure. (2 points)
An object is placed 9.5 cm in front of a convex spherical mirror. Its image forms 3.2 cm behind the mirror. What is the radius of curvature of the mirror? Show all work. (2 points)
A candle is placed in front of a concave spherical mirror of focal length 9.60 cm. The image of the candle is inverted and 3.40 times as large as the candle itself. What is the distance of the candle to the mirror? Show all work and provide units of measure. (2 points)
An arrow pointing upward is placed to the left of a thin converging lens, as shown in the diagram. To identify the location of the image, a student draws three principal from the arrow. What feature should all three principal rays have in common? (2 points)
Dinosaur fossils are over 65 million years old. If some carbon from the dinosaur’s body remained in the fossil, would radiocarbon dating be useful for determining the age of the fossil? (1 point)
Yes, radiocarbon dating is useful for carbon-containing specimens of any age.
No, the carbon would have bonded chemically with other elements.
No, too much of the carbon-14 would have decayed for radiation to be detected.
A radioisotope has a half-life of 5.50 min and an initial decay rate of 7200 Bq. What will be the decay rate after 18.0 min? Show all work and include units of measure. (2 points)
A neutral atom of tin (Z = 50) has 69 neutrons. (a) How many protons does it have? (b) What is its mass number? (2 points)
Which type of nuclear reaction, fission or fusion, is used by nuclear power plants to produce electricity? Why? Be sure to include a brief explanation of the difference between fusion and fission. (2 points)
Radon-222 undergoes an alpha decay to become polonium-218. This reaction is an intermediate in a decay series that begins with uranium-238 and ends in lead-206.
A 1.0-gram sample of pure uranium-238 is sealed in a container at time = 0 years. To calculate the amount of radon-222 present in the container at any moment in the future, what is the minimum amount of information that must be known? (1 point)
The half-life of each decay reaction in the series from uranium-238 to lead-206
The half-life of each decay reaction in the series from uranium-238 to polonium-218
The half-life of each decay reaction in the series from uranium-238 to radon-222
The longest half-life in the series from uranium-238 to radon-222
The mass number of a neutral atom of iron (Z = 26) is 56. How many electrons does it have? (1 point)
56
30
26
13
Answer:
Identify arrows pointing to bonding electrons.
✔ a, b, d
Identify arrows pointing to nonbonding electrons.
✔ c
Identify arrows pointing to structures containing sigma bonds.
✔ a, b, d
Identify arrows pointing to structures containing pi bonds.
✔ a
Explanation:
On edg 2020
Describe each type of biotechnology:
Genetic engineering:
Cloning:
Artificial selection:
Answer:
Genetic Engineering: the direct manipulation of an organisms genes using biotechnology (ex. genetically engineering corn to be insect resistant)
Cloning: The process of producing genetically identical individuals of an organism either natually or artificially,cloning allows for the creation of multiple copies of genes, expression of genes, and study of specific genes (ex. Cloning cells for untreatable diseases)
Artificial Selection: Also known as Selective breeding it is the process by which humans use animal breeding and plant breeding to selectively develop particular phenotypic traits/ characteristics (ex. Dog breeding)
Answer:
Genetic Engineering :
Benefits
-Ability to create food that is resistant to pests, cold, and disease
-Greater food production volume and increased vitamins
Risks
-Concerns about long-term health risks
-Lack of regulation
Cloning
Benefits
-Ability to increase endangered animal populations
-Possibility of eliminating diseases and defective genes
Risks
-Shorter lifespan for cloned animals
-Greater chance of health issues for cloned animals
Artificial Selection
Benefits
-Allows for selection of desired traits
-Ability to create better versions of organisms
Risks
-Loss of genetic diversity
-Increased chance of diseases that can shorten lifespan
Explanation:
This is straight from the lesson 6.01 page 5 (FLVS)
Explain, in terms of energy, why a pendulum swings lower and lowers when you let go of it
Answer:
because of its energy store it had potential and gravity energy stores befoare you let it go and when it swings it lets off its gravitational enery and the potential energy goes to
Explanation:
What determines the strength of the electric force?
How do scientists determine the elements present in different stars
Answer:
Thus, astronomers can identify what kinds of stuff are in stars from the lines they find in the star's spectrum. This type of study is called spectroscopy. ... From spectral lines astronomers can determine not only the element, but the temperature and density of that element in the star.
Explanation:
Scientists use spectroscopy to identify the elements present in stars by analyzing the light they emit. The distinct atomic spectra for each element acts as a fingerprint, allowing astronomers to understand a star's composition and its evolution over time.
Scientists determine the elements present in different stars by using spectroscopy to analyze the light those stars emit. Each chemical element has a unique atomic spectrum, either emitting or absorbing specific wavelengths of light, identifiable through spectroscopic techniques. By comparing the observed spectra with known spectra obtained in laboratories, astronomers can deduce the elements that make up a star. Stars primarily consist of hydrogen and helium, but the presence of heavy elements, such as iron, varies, offering insight into their composition and history.
The study of light elements like lithium, beryllium, and boron in stars, as compared to heavier ones, can illuminate the processes of stellar evolution and the creation of new stellar and planetary bodies. Information from stars' spectra, including subtle shifts due to Doppler effect adjustments for radial velocity, allows scientists to understand not only a star's chemical makeup but also its motion in space. Thus, spectroscopy is a powerful tool for uncovering the secrets of celestial bodies, from individual stars to distant galaxies.
If a thunder clap comes 1.5 s after the lightning strike, how far away is the
strike?
Answer:
514.5 meters
1687.9921 feet
Explanation:
speed of sound = 343 m/s
1.5 (seconds) x 343 (m/s) = 514.5 meters
The distance of the lightning strike is approximately 514.5 meters or 0.5145 kilometers away, calculated by multiplying the time delay of the thunder clap (1.5 seconds) with the average speed of sound (343 m/s).
Explanation:If a thunder clap comes 1.5 seconds after a lightning strike, you can estimate the distance of the strike from your location. Since the speed of sound varies with temperature, we'll use the average speed of sound at room temperature, which is approximately 343 meters per second. To calculate the distance, you multiply the time it takes to hear the thunder (1.5 seconds) by the speed of sound (343 m/s), which equals to about 514.5 meters or roughly 0.5145 kilometers away.
8. What is the frequency of the standing wave shown?
a. 12 Hz
b. 24 Hz
c. 36 Hz
d. 48 Hz
9. What would be the fundamental (1st harmonic) frequency of the string?
a. 12 Hz
b. 24 Hz
c. 36 Hz
d. 48 Hz
Answer:
while using brainly app. there is an option of uploading image of diagram, graph or plot. plz use that feature to upload image of the standing wave so that your question can be properly answeres
A large manufacturing company releases chemicals into the air every day. The chemicals eventually make their way into local bodies of water, killing many of the organisms that live in these areas.
Which best describes this situation?
A.habitat destruction due to pollution
B.habitat destruction due to poaching
C.pollution due to poaching
D.poaching due to habitat destruction
Answer:
Habitat deconstruction due to pollution
Explanation:
Hope this helps mate! :)