Which characteristic of atoms is the basis for the order on the Periodic Table?


A.
reactivity


B.
atomic size


C.
atomic number


D.
mass number

Answer:

it is equivalent to the erosion of the rocks.

Explanation:

It can be said that the process of dissolving a rock is equivalent to the erosion process because erosion is the wear and tear on the rocks that is produced by the action of wind and water in their different forms. This wear is produced by the dragging of the particles from the rocks, produced by the impact of the particles that are moved in the medium against the rocks. When dissolving a rock in an acid, for example lemon or acetic acid, these acids react with the stone dissolving it, allowing the stone to break.

The subatomic particle with no charge is a neutron. Ions have a net charge because they have gained or lost electrons, and electrons themselves are negatively charged. The whole atom can be charged or neutral.

The subatomic particle that possesses no electrical charge is called a neutron. This is different from ions, which are atoms or molecules that have gained or lost one or more electrons, and thus have a net electrical charge. Electrons are subatomic particles that have a negative charge. Neutrons, along with protons, make up the atom's nucleus, or core. The atom itself is composed of a central nucleus surrounded by a cloud of electrons. However, the atom as a whole can be charged (an ion) or neutral, depending on whether it has equal numbers of electrons and protons.

https://brainly.com/question/31977312

#SPJ5

Option 3, 23/11Na and 23/11Na+, have the most nearly identical atomic and molecular properties.

The pair of species with the most nearly identical atomic and molecular properties is option 3, 23/11Na and 23/11Na+.

According to Charles's law, the volume of a given amount of gas is directly proportional to its temperature in Kelvin when the pressure is held constant. In this case, the final volume of the methane gas can be calculated using the formula V2 = V1 * (T2 / T1) where V1 is the initial volume, T1 is the initial temperature in Kelvin, T2 is the final temperature in Kelvin, and V2 is the final volume.

According to Charles's law, the volume of a given amount of gas is directly proportional to its temperature in Kelvin when the pressure is held constant. This means that as the temperature of the methane gas increases from 25°C to 88°C, its volume also increases. To find the final volume, you can use the formula:

V2 = V1 * (T2 / T1)

Where V1 is the initial volume (36.4 L), T1 is the initial temperature in Kelvin (25°C + 273.15), T2 is the final temperature in Kelvin (88°C + 273.15), and V2 is the final volume.

Plugging in the values:

V2 = 36.4 L * (361.15 K / 298.15 K)

Calculating, the final volume of the gas is approximately 43.88 L.

https://brainly.com/question/16927784

#SPJ11

By applying Hess's law, we can calculate the unknown standard enthalpy of formation for AgI(s) using the given standard enthalpy of reaction, and the standard enthalpies of formation for the other reactants and products.

In order to determine the value of ΔHf° for AgI(s), we need to use Hess's law which states that the total enthalpy change in a chemical reaction is independent of the pathway over which the reaction takes place. The formula is as follows: ΔHrxn = Σ ΔHf°(products) - Σ ΔHf°(reactants).

Given: ΔHrxn = -54.0 kJ, ΔHf° for AgBr(s) = -100.4 kJ/mol, and ΔHf° for Br2(g) = +30.9 kJ/mol. Making AgI(s) the subject of the formula, we find ΔHf° for AgI(s) =  Σ ΔHf°(products) - ΔHrxn, which upon substituting the values gives us the answer.

This method which employs Hess's law, enthalpy of formation, and the known quantities to provide the unknown standard enthalpy of formation for AgI(s) is representative of typical approaches in thermochemistry.

https://brainly.com/question/14561923

#SPJ12

The enthalpy of formation for AgI(s) is calculated using Hess's Law with the known enthalpies of formation for AgBr(s) and Br₂(g). Applying the enthalpy change for the reaction, the ΔH°f for AgI(s) is found to be -15.5 kJ/mol.

To determine the enthalpy of formation (ΔH°f") of AgI(s) for the reaction AgI(s) + Br₂(g) → AgBr(s) + I₂(s) using Hess's Law:

The standard formation reaction of solid calcium hydroxide can be represented by the balanced chemical equation: CaO(s) + H2O(l) → Ca(OH)2(s).

The standard formation reaction of solid calcium hydroxide can be represented by the balanced chemical equation:

CaO(s) + H2O(l) → Ca(OH)2(s)

In this reaction, solid calcium oxide (CaO) reacts with liquid water (H2O) to produce solid calcium hydroxide (Ca(OH)2) as the only product.

https://brainly.com/question/33424440

#SPJ12

Solid calcium hydroxide is formed from the reaction of solid calcium oxide with liquid water, following the balanced chemical equation: CaO(s) + H₂O(l) → Ca(OH)₂ (s). The primary reactant, calcium oxide, can be readily obtained from the decomposition of calcium carbonate.

A balanced chemical equation for the standard formation reaction of solid calcium hydroxide can be derived from the reaction of solid calcium oxide with liquid water. The reaction can be represented as follows:

CaO(s) + H₂O(l) → Ca(OH)₂ (s)

 In this equation, solid Calcium Oxide (CaO) reacts with liquid water (H₂O) to form solid Calcium Hydroxide (Ca(OH)₂). Solid calcium oxides can be obtained from the decomposition of CaCO3 where the reaction is represented as CaCO3(s) → CaO(s)+CO2(g). By allowing the CO₂ to escape, we can achieve a 100% yield of CaO. This CaO then reacts with water to yield calcium hydroxide.

https://brainly.com/question/28501571

#SPJ11

23.7 g of Ca₃(PO₄)₎₂ contains 9.20 x 10^22 ions of PO₄³⁻  

23.7 g of Ca₃(PO₄)₎₂ contains 0.1528 moles of PO₄³⁻ which is equivalent to 9.20 x 10^22 ions of PO₄³⁻

Therefore;

Ca₃(PO₄)₎₂ ionizes to give out 3 Ca²⁺ ions and 2 PO₄³⁻ ions

Ca₃(PO₄)₎₂ → 3Ca²⁺ + 2PO₄³⁻

Required to determine the number of ions of PO₄³⁻ ions

Number of moles = Mass /Molar mass

Molar mass of Ca₃(PO₄)₎₂ = 310.1767 g/mol

Thus;

Moles = 23.7 g/310.1767 g/mol

          = 0.0764 moles

1 mole of  Ca₃(PO₄)₎₂ ionizes to give 2 moles PO₄³⁻ ions

Therefore;

0.0764 moles will produce;

 = 0.0764 moles x 2

 = 0.0152 moles PO₄³⁻ ions

1 mole of PO₄³⁻ ions contains 6.022 x 10^23 ions

Therefore;

0.01528 moles PO₄³⁻ ions contains;

= 0.01528 x 6.022 x 10^23 ions

= 9.20 x 10^22 ions

Keywords: Atoms, ions, Moles, molar mass

Level: High school

Subject: Chemistry

Topic: Moles

Sub-topic: Avogadro's constant

This plasma is most likely influenced by magnetic and electric fields. The massive positively charged ions which are influenced the lighter electrons than replace the ions to keep charge impartiality.

Therefore electric field influence the plasma. The movement of charged particles identical to a magnetic field line is not influenced. Plasma contains charged particles which are positive nuclei and negative electrons which can be molded and restricted by magnetic forces.

Alike iron filings in the closeness of a magnet, bits in the plasma will ensue magnetic field lines.

Answer is C)magnetic and electric fields.

Explain how this was solved please

Thermometers are filled with alcohol instead for water because of the lower freezing point.

Thermometer is an instrument which is used to measure the temperature of any substance which is present in liquid state.

In most of the thermometers mercury is used as it shows high fluctuations and small change will also measurable. We did not use water in the thermometers as they have normal freezing point as 0 degree celsius, but we will use alcohols in the thermometers as they have low freezing point than water as of -114 degree celsius.

And for this reason we will use thermometers filled with alcohol in all places under cold season also.

Hence due to lower freezing point we will use.

To know more about freezing point, visit the below link:
https://brainly.com/question/24314907

Answer:

D) 4

Explanation:

A compound that consist of two elements in which elements are chemically combined in a fixed proportion.

Compounds:

They are made up of two or more than two elements when combine in a fixed ratio. One compound from all sources have same same constituent ratio.

Example:

In Water or [tex]\rm \bold{H_2O}[/tex] , ratio of Hydrogen and Oxygen is 2:1. If this ratio will change to 2:2 this become Hydrogen peroxide [tex]\rm \bold{H_2O_2}[/tex].

Water gives you life but  Hydrogen peroxide can kill you if you consume it.

Hence, we can conclude that a compound that consist of two elements in which elements are chemically combined in a fixed proportion.

To know more about Compounds you can refer to the link:

https://brainly.com/question/23334479?referrer=searchResults

The substance that can be decomposed by chemical means is [tex]\boxed{{\text{c}}{\text{. methane}}}[/tex].

Further Explanation:

The pure form of matter is called substance whereas the combination of atoms and molecules is known as mixture.

Substance is further divided into two types:

1. Element

It is a type of pure substance and is the simplest form that cannot be broken down by any chemical means. Copper, iron, and cobalt are some of the examples of elements.

2. Compound

It is composed of two or more different elements that are held together by chemical bonds. These can be broken down into their respective constituents. Their properties are quite different from those of their constituent elements. NaCl, [tex]{\text{C}}{{\text{O}}_{\text{2}}}[/tex] and [tex]{{\text{H}}_{\text{2}}}{\text{O}}[/tex] are examples of compounds.

a. Cobalt is an element so it is the simplest form in which it can exist. Therefore it cannot be broken down or decomposed by chemical methods.

b. Krypton is an element so it is the simplest form in which it can exist. Therefore it cannot be broken down or decomposed by chemical methods.

c. Methane is formed from one carbon and four hydrogen atoms so it is a compound. Since compounds can be decomposed chemically, methane is also decomposed by chemical means.

d. Zirconium is an element so it is the simplest form in which it can exist. Therefore it cannot be broken down or decomposed by chemical methods.

Learn more:

1. Which sample is a pure substance? https://brainly.com/question/2227438

2. Which is a characteristic of a mixture? https://brainly.com/question/1917079

Answer details:

Grade: High School

Subject: Chemistry

Chapter: Elements, compounds, and mixtures

Keywords: substance, methane, cobalt, zirconium, krypton, element, compound, chemical means, decomposed, broken down, simplest form.

Final answer:

To neutralize 0.220 g of NaOH with 0.130 M H2SO4, you would need approximately 21.2 mL of the sulfuric acid solution.

Explanation:

To determine how many milliliters of 0.130 M H2SO4 are needed to neutralize 0.220 g of NaOH, follow these steps:

Calculate the moles of NaOH by using its molar mass (Molar mass of NaOH = 40.00 g/mol):

0.220 g NaOH × (1 mol NaOH / 40.00 g NaOH) = 0.0055 mol NaOH

Write the balanced chemical equation for the neutralization reaction:

H2SO4 (aq) + 2NaOH(aq) → Na2SO4 (aq) + 2H2O(l)

Calculate the moles of H2SO4 needed using the stoichiometry of the reaction:

0.0055 mol NaOH × (1 mol H2SO4 / 2 mol NaOH) = 0.00275 mol H2SO4

Calculate the volume of H2SO4 needed by rearranging the molarity equation (Molarity = moles / volume in liters):

Volume of H2SO4 = 0.00275 mol H2SO4 ÷ 0.130 mol/L

Volume of H2SO4 = 0.0212 L

Convert the volume from liters to milliliters:

0.0212 L × 1000 mL/L = 21.2 mL

Therefore, approximately 21.2 mL of the 0.130 M H2SO4 solution is needed to neutralize the given amount of NaOH.

Answer: D. A person pushing a couch without being able to move it.

Explanation:

The reason why is because static friction is where it prevents surfaces from sliding past each other, the static friction strength changes to match the applied force. If someone was to increase their force the static friction would still prevent the object from moving....

as in what the person above me said that goes towards sliding friction because if you were trying to push something with static friction if you have more than one person applying force then you would be able to move the object but with only having one the static friction would be greater then the applied force.

Answer:

Although the story of Beowulf is set in Scandinavia what language was it written in Old English.

Explanation:

Beowulf is a very old piece of literary genre. It is one of the earliest European epic written in vernacular language. It is an epic poem written in old English. The setting of the story has been set in Scandinavia. Beowulf is the hero of the poem. He is the protagonist of the story who survives the attacks of the monster named Grendel.

Answer:

OLD ENGLISH

Explanation:

what language "Beowulf" was written in originally. The first manuscript was written in the language of the Saxons, "Old English," also known as "Anglo-Saxon." Since then, the epic poem has been estimated to have been translated into 65 languages

Answer:

Narcotics

Explanation:

gradpoint

Chemical reactions create simpler or more complex products from reactants and gives off energy. The statement (A), (B), and (C) are correct for the chemical reactions.

A Chemical Reaction is a process that takes place in which two or more reactants interact with each other to produce a new product.

In a chemical reaction, a chemical change takes place and is generally noticed with physical changes such as precipitation,  heat production, color change, etc.

In the combination reaction, two simple elements combine to produce a compound. For example, sodium chloride is formed from sodium and chlorine gas.

In the decomposition reaction of Calcium carbonate dissociates into calcium oxide and carbon oxide. In the combusion reaction, heat is released.

But in the chemical reaction of atoms of one element can never be cahnged into another element.

Therefore, all statements are correct except option D.

Learn more about chemical reactions, here:

https://brainly.com/question/11231920

#SPJ2