Answer:
6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂Explanation:
Photosynthesis is the chemical process carried out by plants for the conversion of inorganic matter (carbon dioxide and water) into organic matter (glucose) with the release of oxygen, using light (sun energy).
So the chemical process may be represented by:
Word equation:
carbon dioxide + water + sun energy → glucose + oxygen
Skeleton equation:CO₂ + H₂O + sun energy → C₆H₁₂O₆ + O₂
Balanced chemical equation:6CO₂ + 6H₂O + sun energy → C₆H₁₂O₆ + 6O₂
Supressing the energy to show only the chemical compounds:6CO₂ + 6H₂O → C₆H₁₂O₆ + 6O₂
Photosynthesis is represented by the equation 6CO₂ + 6H₂O --> C6H12O6 + 6O₂. This complex process involves multiple stages and intermediate reactions that collectively result in the production of glucose and oxygen from carbon dioxide and water.
Explanation:The equation representing photosynthesis is 6CO₂ + 6H₂O --> C6H12O6 + 6O₂. This shows how carbon dioxide and water, in the presence of sunlight, are transformed into glucose (a type of sugar) and oxygen. This process, however, is quite complex and occurs in multiple stages, involving intermediate reactions and products.
There are two major phases in photosynthesis. The first is the light-dependent reactions which happen only in the presence of sunlight. The second phase is the light-independent reactions, also known as the Calvin Cycle. The overall equation for photosynthesis is a representation of a redox reaction, where carbon dioxide is reduced and water is oxidized, producing glucose and oxygen.
Though this equation may look simple, photosynthesis actually involves a series of complex biochemical reactions. In conclusion, the correct representation amongst the given options is 6CO₂ + 6H₂O --> C6H12O6 + 6O₂ .
Learn more about Photosynthesis here:https://brainly.com/question/29764662
#SPJ6
if 58.67g of mercuric oxide were completely decomposed to generate 54.34 g of mercury how many grams of oxygen should have been produced
Answer:
4.33g
Explanation:
The reaction equation is given as:
2HgO → 2Hg + O₂
Given parameters:
Mass of HgO = 58.67g
Mass of Hg produced = 54.34g
Unknown:
Mass of oxygen produced = ?
Solution
From the reaction equation, using the mole concept, it is possible to determine the mass of oxygen gas produced.
To do this, we first determine the molar composition of the mass of the given mercury oxide. Then we use the balanced reaction equation to determine the mass of oxygen produced:
Number of moles of HgO = [tex]\frac{mass of HgO}{Molar mass of HgO}[/tex]
Molar mass of HgO = 200.6 + 16 = 216.6gmol⁻¹
Number of moles of HgO = [tex]\frac{58.67}{216.6}[/tex] = 0.271mol
From the reaction equation, we know that:
2moles of HgO produced 1 mole of O₂
0.271moles of HgO would also produce, 0.136mol
Therefore, mass of O₂ gas produced = number of moles of O₂ x molar mass
Molar mass of O₂ = 16x2 = 32gmol⁻¹
Mass of O₂ gas = 0.136 x 32 = 4.33g
A 1.50-liter sample of dry air in a cylinder exerts a pressure of 3.00 atmospheres at a temperature of 25°C. Without changing the temperature, a piston is moved in the cylinder until the pressure in the cylinder is reduced to 1.00 atmospheres. The volume of the gas is _____.
Answer:
4.50 liters
Explanation:
Boyles law P1 · V1 =P2 · v2
V2=P1·V1÷P2
V2= 3 · 1.5 ÷ 1
Which proportionality applies to avogadro’s law?
Answer:
The volume of the gas is directly proportional and amount (moles) of the gas at constant T and P.
Explanation:
Avogadro's law states that, "equal volumes of all gases, at the same temperature and pressure, have the same number of molecules."For a given mass of an ideal gas, the volume of the gas is directly proportional and amount (moles) of the gas at constant T and P.V ∝ n.
Pastoral farming is best described as _______. a. a method of raising livestock and moving herds b. an African method of agriculture c. a method of cultivating crops on poor soils d. a common method of desert farming Please select the best answer from the choices provided A B C D
Answer:
Pastoral farming is best described as a method of raising livestock and moving herds. (a.)
Determine the empirical formula of the following compound if a sample contains 0.104 molK, 0.052 molC, and 0.156 molO;?
Answer:
K₂CO₃
Explanation:
Given parameters:
Number of moles of K = 0.104mol
Number of moles of C = 0.052mol
Number of moles of O = 0.156mol
Method
From the given parameters, to calculate the empirical formula of the elements K, C and O, we reduce the given moles to the simplest fraction.
Empirical formula is the simplest formula of a compound and it differs from the molecular formula which is the actual formula of a compound.
Divide the given moles through by the smallest which is C, 0.052mol. Then approximate values obtained to the nearest whole number of multiply by a factor to give a whole number ratio. This is the empirical formulaSolution
Elements K C O
Number of moles 0.104 0.052 0.156
Dividing by the
smallest 0.104/0.052 0.052/0.052 0.156/0.052
2 1 3
The empirical formula is K₂CO₃
The empirical formula of a compound containing 0.104 mol of potassium (K), 0.052 mol of carbon (C), and 0.156 mol of oxygen (O) is K2CO3, based on the smallest whole number ratio of moles of each element.
Explanation:To determine the empirical formula of a compound from the amount of moles of each element, you need to find the smallest whole number ratio of the moles of each element. For the compound mentioned with 0.104 mol K (potassium), 0.052 mol C (carbon), and 0.156 mol O (oxygen), you can do this by dividing each mole value by the smallest of the amounts of moles present.
In this case, the smallest value is 0.052 mol (carbon). So you would divide the number of moles of each element by 0.052 mol:
K: 0.104 mol / 0.052 mol = 2C: 0.052 mol / 0.052 mol = 1O: 0.156 mol / 0.052 mol = 3Therefore, the empirical formula is K2CO3.
What is the name of the ionic compound formed from lithium and bromine
Answer:
Lithium bromide, or LiBr, is the name of the iconic compound formed from lithium and bromine.
The ionic compound formed from lithium and bromine is called Lithium Bromide.
What more should you know about Lithium Bromide?Lithium Bromide has the chemical formula LiBr. Lithium is a metal that belongs to the alkali metal group, while bromine is a non-metal that belongs to the halogen group.
When lithium and bromine react, they form an ionic compound, in which lithium donates an electron to bromine. Lithium becomes a positively charged ion, called a lithium ion, while bromine becomes a negatively charged ion, called a bromide ion.
The lithium ions and the bromide ions are then attracted to each other by the force of electrostatic attraction.
Find more exercises on Lithium Bromide;
https://brainly.com/question/873805
#SPJ6
What do electromagnetic waves carry? How are they produced Through which media can they move? Where do they transfer energy? What do they not transfer? What do mechanical waves carry? How are they produced? Through which media can they move? Where do they transfer energy? What do they not transfer?
Answer:
they are transfer from the towers
Explanation:
What are the two oxidation states of nitrogen in nh4no2?
Answer:
Oxidation state of N in (NH₄) is (-3).
Oxidation state of N in (NO₂) is (+3).
Explanation:
NH₄NO₂ is dissociated according to the equation:NH₄NO₂ → NH₄⁺ + NO₂⁻.
We can calculate the oxidation state:
NH₄⁺:
The total oxidation state of NH₄⁺ is (+1).
The oxidation state of H is known to be (+1).
∴ Oxidation state of N + 4(oxidation state of H) = +1.
∴ Oxidation state of N + 4(+1) = +1.
∴ Oxidation state of N = +1 - 4 = -3.
NO₂⁻:
The total oxidation state of NO₂⁻ is (-1).
The oxidation state of O is known to be (-2).
∴ Oxidation state of N + 2(oxidation state of O) = -1.
∴ Oxidation state of N + 2(-2) = -1.
∴ Oxidation state of N - 4 = -1.
∴ Oxidation state of N = -1 + 4 = +3.
Two oxidation states of nitrogen in NH₄NO₂ is +3 & -3.
What is oxidation state?Oxidation state of any atom tells about the no. of electrons gain or looses from that atom.
NH₄NO₂ is dissociates as:
NH₄NO₂ → NH₄⁺ + NO₂⁻
Oxygen state of nitrogen in NH₄⁺ can be calculated as:
x + 4(1) = 1
x = 1 - 4 = -3
In NH₄⁺, oxidation state of hydrogen is +1 & whole charge on the ion is also +1.
Oxygen state of nitrogen in NO₂⁻ can be calculated as:
x + 2(-2) = -1
x = -1 + 4 = 3
In NO₂⁻, oxidation state of oxygen is -2 & whole charge on the ion is -1.
Hence, -3 & +3 are the oxidation states of nitrogen.
To learn more about oxygen state, visit the below link:
https://brainly.com/question/8990767
Seawater contains approximately 3.5%NaCl by mass and has a density of 1.02 g/mL. What volume of seawater contains 7.5 g of sodium ?
To find the volume of seawater containing 7.5 g of sodium, one must first convert this mass to the equivalent mass of NaCl, then calculate the total mass of seawater needed, and finally use the density of seawater to find the corresponding volume.
Explanation:The question asks to calculate the volume of seawater that contains 7.5 g of sodium. First, we need to determine the mass of NaCl which corresponds to 7.5 g of sodium. Given that the atomic weight of sodium (Na) is approximately 23 g/mol, we can find the amount of NaCl using the ratio of the molecular weight of NaCl (58.44 g/mol) to that of Na. Once we have this mass, we can use the percentage of NaCl in seawater (3.5%) to find the total mass of seawater needed. Finally, given the density of seawater (1.02 g/mL), we can calculate the volume of seawater containing this total mass.
Final answer:
To calculate the volume of seawater that contains 7.5g of sodium, we use the concentration of NaCl in seawater and the atomic masses of Na and Cl. We find that approximately 529.00mL of seawater is needed to provide 7.5g of sodium.
Explanation:
To determine the volume of seawater containing 7.5 g of sodium, we must first understand the concentration of NaCl in seawater and the atomic mass of sodium. Seawater contains approximately 3.5% NaCl by mass. Given that the atomic masses of Na and Cl are 23.0 and 35.4 respectively, we can calculate the mass of sodium in seawater. Using the percentage by mass and the given density of seawater, we can then calculate the volume.
The mass percentage of NaCl in seawater is 3.5%, which means in 100g of seawater, there is 3.5g of NaCl. To find the mass of sodium only, we consider the molar mass ratio of Na to NaCl, which is 23.0 / (23.0 + 35.4). Therefore, the mass of sodium in 3.5g of NaCl is given by:
(23.0 / 58.4) × 3.5g.
To find the mass of Na in 100g of seawater, we multiply this by the mass percentage of NaCl in seawater:
(23.0 / 58.4) × 3.5g × 1.00 = 1.39g (rounded to two decimal places).
Thus, to find the amount of seawater containing 7.5g of Na, we would do the following calculation:
(100g seawater / 1.39g Na) × 7.5g Na= 539.57g of seawater.
Finally, to convert this mass to volume using the density of seawater (1.02g/mL), the volume is:
539.57g / 1.02g/mL = 529.00mL (rounded to two decimal places).
Therefore, approximately 529.00mL of seawater contains 7.5g of sodium.
How do you find the mass number of an element
Answer:
add up the mass of protons and neutrons
Explanation:
Answer:
To find the mass number of an element you add up the number of protons (atomic number) and neutrons.Explanation:
The mass number is a specific property of the atoms, defined as the sum of the protons and neutrons, which are the subatomic particles that are in the nucleus of the atom.
The electrons do not count for the mass of atoms because their mass is about 1/1840 the mass of a proton or a neutron.
The relative masses of protons and neutrons is 1: 1, then they count equally.
As an example, the mass number of the atom carbon-12 is calculated in this way:
Atomic number of carbon: Z = 6 (6 protons)Number of neutrons: N = 6Mass number: A = Z + N = 6 + 6 = 12.The number 12 added to the name in carbon-12, stands for its mass number.
Also, the mass number is indicated as a superscript to the left of the chemical symbol of the element, and the atomic number as a subscript to the left of the chemical symbol. For the example of carbon-12 that is:
[tex]^{12}_{6}C[/tex]Elements in group 2 are all called alkaline earth metals. What is most similar about the alkaline earth metals?
Answer:
A main similitary all the elments have in that group is they all have 2 valance electrons
Explanation:
Explanation:
As it is known that elements present in group 2 are also known as alkaline earth metals.
Elements that belong to this group are beryllium, magnesium, calcium, strontium, barium, and radium.
Since, all of them are placed in group 2 this means that all these elements have 2 valence electrons.
Hence, all these elements will also have similar chemical properties.
Ethanoic acid and 1-butanol can react to produce water and a compound classified as an
Answer:
Ethanoic acid and 1-butanol can react to produce water and a compound classified as an ester.
Explanation:
Ethanoic acid reacts with ethanol in the presence of concentrated sulphuric acid as a catalyst to produce the ester "butyl ethanoate" and water:
CH₃COOH + CH₃CH₂CH₂CH₂OH → CH₃COOCH₂CH₂CH₂CH₃.
Ethanoic acid reacts with 1-butanol in an esterification reaction to produce butyl ethanoate and water. This is a common type of reaction in organic chemistry, resulting in the formation of an ester.
When ethanoic acid reacts with 1-butanol, a type of chemical reaction called esterification occurs. Esterification typically involves the reaction of a carboxylic acid (in this case, ethanoic acid) with an alcohol (here, 1-butanol) to form an ester and water. The specific ester formed from ethanoic acid and 1-butanol is called butyl ethanoate, and this is the compound classified as an ester mentioned in the question. The reaction can be summarized by the following equation:
CH₃COOH (ethanoic acid) + C₄H₉OH (1-butanol) →CH₃COOC₄H₉(butyl ethanoate) + H₂O (water)
This reaction typically requires an acid catalyst to proceed, commonly sulfuric acid or hydrochloric acid. The process of creating esters like butyl ethanoate is important in both organic chemistry and industry, where esters are used as fragrances, flavors, and solvents.
Why is the melting of ice not a chemical change?
Answer:
Chemical change is basiclly chemical reaction that creates new substances, sometimes can be hard to observed. The melting of the ice only involves in changing the form of the matter, from solid to liquid form, it doesn't transform the substance which is water into another substance. Therefore, the melting of ice is not a chemical change, but rather a physical one.
Answer:
A new substance is not formed
Explanation:
Its still water just not physically
Which aqueous solution has the highest boiling point at standard pressure?(1) 1.0 M KC1(aq) (3) 2.0 M KCl(aq)(2) 1.0 M CaC12(aq) (4) 2.0 M CaC12(aq)
Answer:
(4) 2.0 M CaCl₂(aq).
Explanation:
Adding solute to water elevates the boiling point.The elevation in boiling point (ΔTb) can be calculated using the relation:ΔTb = i.Kb.m,
where, ΔTb is the elevation in boiling point.
i is the van 't Hoff factor.
van 't Hoff factor is the ratio between the actual concentration of particles produced when the substance is dissolved and the concentration of a substance as calculated from its mass. For most non-electrolytes dissolved in water, the van 't Hoff factor is essentially 1.Kb is the molal elevation constant of water.
m is the molality of the solution.
(1) 1.0 M KCl(aq):
i for KCl = no. of particles produced when the substance is dissolved/no. of original particle = 2/1 = 2.
suppose molarity = molality, m = 1.0 m,
∴ ΔTb for (1.0 M KCl) = i.Kb.m = (2)(Kb)(1.0 m) = 2(Kb).
(2) 2.0 M KCl(aq):
i for KCl = no. of particles produced when the substance is dissolved/no. of original particle = 2/1 = 2.
suppose molarity = molality, m = 2.0 m,
∴ ΔTb for (1.0 M KCl) = i.Kb.m = (2)(Kb)(2.0 m) = 4(Kb).
(3) 1.0 M CaCl₂(aq):
i for CaCl₂ = no. of particles produced when the substance is dissolved/no. of original particle = 3/1 = 3.
suppose molarity = molality, m = 1.0 m,
∴ ΔTb for (1.0 M KCl) = i.Kb.m = (3)(Kb)(1.0 m) = 3(Kb).
(4) 2.0 M CaCl₂(aq):
i for CaCl₂ = no. of particles produced when the substance is dissolved/no. of original particle = 3/1 = 3.
suppose molarity = molality, m = 2.0 m,
∴ ΔTb for (1.0 M KCl) = i.Kb.m = (3)(Kb)(2.0 m) = 6(Kb).
So, the aqueous solution has the highest boiling point at standard pressure is: (4) 2.0 M CaCl₂(aq).
The aqueous solution with the highest boiling point at standard pressure is the 2.0 M CaCl2 solution because it has the highest concentration and dissociates into the most ions.
Explanation:The boiling point of an aqueous solution is influenced by the concentration of solutes due to the colligative property known as boiling point elevation. According to the principle of boiling point elevation, each mole of solute particles will raise the boiling point of 1 liter of water by 0.51°C. Taking this into account, the boiling point of a solution is also affected by the number of particles into which each formula unit dissociates in solution. For example, CaCl2 dissociates into three ions (one calcium ion and two chloride ions).
Given the options, the aqueous solution with the highest boiling point at standard pressure is the 2.0 M CaCl2 solution (Option 4). This is because it has the highest concentration of particles in solution: for every mole of CaCl2 there are three moles of ions due to dissociation, and its molarity is the highest among the given solutions.
The balanced equation given below means: CH4 + 2 O2 → CO2 + 2H2O The balanced equation given below means: CH4 + 2 O2 → CO2 + 2H2O One molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water. One gram of methane reacts with two grams of oxygen to produce one gram of carbon dioxide and two grams of water. One mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and 2 moles of water. One mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and 2 moles of water, one gram of methane reacts with two grams of oxygen to produce one gram of carbon dioxide and two grams of water and one molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water. One mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and 2 moles of water and one molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water.
Answer:
See below.
Explanation:
CH4 + 2 O2 → CO2 + 2H2O
One molecule of methane reacts with 2 molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water.
It is also true if we replace the word molecule by mole.
Answer : The correct option is,
One molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water.
One mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and 2 moles of water.
Explanation :
The given balanced chemical reaction is,
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
Balanced chemical reaction : It is defined as the reaction in which the number of atoms of individual elements present on reactant side must be equal to the product side.
The given chemical reaction is a balanced reaction.
By the stoichiometry we can say that,
One molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water.
or,
One mole of methane reacts with two moles of oxygen to produce one mole of carbon dioxide and 2 moles of water.
Easy Points
0°C = 273°k
True of False
Happy Summer
Answer:
True
Explanation:
0°C = 273°k
0°C = 273°k ....
It is true.
How many moles of sodium carbonate contain 1.773 × 1017 carbon atoms?
Answer:
2.941 × 10⁻¹⁷ molExplanation:
1) Chemical formula of sodium carbonate: Na₂CO₃
2) Ratio of carbon atoms:
The number of atoms of C in the unit formula Na₂CO₃ is the subscript for the atom, which is 1 (since it is not written).Hence, the ratio is 1 C atom / 1 Na₂CO₃ unit formula.
This is, there is 1 atom of carbon per each unit formula of sodium carbonate.
3) Calculate the number of moles in 1.773 × 10⁷ carbon atoms
Divide by Avogadro's number: 6.022 × 10²³ atoms / molnumber C moles = 1.773 × 10⁷ atoms / (6.022 × 10²³ atoms/mol)number C moles = 2.941 × 10⁻¹⁷ molSince, the ratio is 1: 1, the number of moles of sodium carbonate is the same number of moles of carbon atoms.
interstellar clouds are primarily composed of nitrogen and oxygen. true or false?
Answer:
The statement is false
Explanation:
Interstellar clouds are not primarily composed of nitrogen and oxygen. Interstellar clouds are generally an made up of gas, plasma, and dust in our and other galaxies.
Answer: False
Explanation:
An interstellar cloud can be defined as the accumulation of gas, plasma and dust in our galaxy or other galaxy.
The composition of interstellar clouds are determined by studying the electromagnetic radiation that is received by radio waves, gamma rays on the electromagnetic spectrum.
When The electromagnetic radiations was studied then organic compounds like vinyl chloride and methanol which was not expected.
All the chemical reactions that go on in organisms, whether they be plant or animal, are catalyzed by enzymes.
a. True
b. False
I think the answer is true but I need a second opinion.
Answer:
A. True
Explanation:
You are right, the answer is a. true!
Compared with the freezing-point depression of a 0.01 m c6h12o6 solution, the freezing-point depression of a 0.01 m nacl solution is
Answer:
Twice as much.
Explanation:
That's because the freezing point depression depends on the total number of solute particles.
C₆H₁₂O₆(s) ⟶ C₆H₁₂O₆(aq)
0.01 mol of C₆H₁₂O₆ gives 0.01 mol of solute particles.
NaCl(s) ⟶ Na⁺(aq) + Cl⁻(aq)
1 mol of NaCl gives 0.01 mol of Na⁺(aq) and 0.01 mol of Cl⁻(aq).
That's 0.02 mol of particles, so the freezing point depression of 0.01 mol·L⁻¹ NaCl will be twice that of 0.01 mol·L⁻¹ C₆H₁₂O₆.
*Giving Brainly with the points* Best answer gets it
List two uses of high-density polyethylene other than those listed in the
table.
Two plastics that are targeted for recycling from household waste are
polyethylene terephthalate (PETE) and high density polyethylene (HDPE).
One of the problems of recycling such materials is separating them. Suppose
you have been hired to set up a process for separating large quantities of
waste plastic that is a mixture of PETE and HDPE. Describe how you might
perform this separation.
Describe the methods by which an electric potential develops in primary cells and dry cells.
Answer:
In a primary cell, two electrodes (one of copper and other of zinc) of metal atoms are used. These electrodes are dipped in an electrolyte solution that causes the metals to produce their respective positive and negative ions.
In this way, the flow of charges takes place and supply the electricity to the source.
Unlike a primary cell, a dry cell contains paste of an electrolyte instead of the solution. The contents of electrolyte paste react with each other through a chemical process and convert the chemical energy into electrical energy.
Answer:
In primary cells, an electric potential develops through chemical action between the plates within the cell. Positively charged ions of zinc enter the acid and free electrons released from zinc atoms collect on the zinc plate, which results in a negative charge. At the same time, positively charged ions of hydrogen from the acid remove free electrons from the copper plate, which becomes positively charged. Through a conducting material connecting the plates, free electrons move from the zinc plate to the copper plate as long as the chemical reaction lasts.
Dry cells also develop electric potential via chemical actions within the cell. Free electrons removed from the carbon rod collect on a zinc can. The rod exhibits a positive charge and the can becomes negatively charged; this allows for an electric potential to develop between these two items. Through a conducting material connecting the can to the rod, free electrons move from the can to the rod as long as the conducting path exists.
Explanation:
straight from Penn
Which of the following is an incorrect pairing?
a. CH2::CHCH2CH2CH2CH2CH2CH3, alkene
b. CH3OCH3, amine
c. CH3CH2OH, alcohol
d. (CH3)2CO, ketone
Answer:
b. CH3OCH3, amine.
Explanation:
It is not an amine It is ethyl ether.
The option that is incorrect pairing is b. CH3OCH3, amine.
What are aminesCH3OCH3 represents the chemical formula for dimethyl ether, which is a type of ether. Ethers are organic compounds characterized by an oxygen atom linking two alkyl or aryl groups. They are not classified as amines.
Amines, on the other hand, are a different class of organic compounds that contain a nitrogen atom bonded to carbon atoms. They are typically named with the suffix "-amine" and can be primary, secondary, or tertiary depending on the number of alkyl or aryl groups bonded to the nitrogen atom.
Therefore, the pairing of CH3OCH3 with amine is incorrect, as CH3OCH3 is an ether, not an amine.
Learn more about amine at
https://brainly.com/question/29204285
#SPJ6
How many grams of NaNO3 would have to be added to 100. grams of water at 45°C to make a saturated solution of this salt? 1. 100. 2. 110. 3. 120. 4. 130.
Answer:
2. 110.
Explanation:
Kindly find the attached image.From the solubility curve, you can find that at 45°C to make a saturated solution of this salt, you should add 110 g of NaNO₃.
So, the right choice: 2. 110.The dissolution of the solute in the solvent at the specified temperature is termed as solubility. The maximum solubility of sodium nitrate in the water at 45 degree Celsius in 110 grams.
What is the solubility curve?The increase in temperature of the solvent resulted in the weaker the intermolecular force of solvent, and increases the solubility.
The solubility curve is drawn for the maximum amount of solute that can be dissolved in the solvent at the specified temperature.
From the solubility curve of sodium nitrate, the maximum amount of sodium nitrate in the water at 45 degree Celsius is 110 grams. Thus, option 2 is correct.
Learn more about solubility, here:
https://brainly.com/question/13620168
Which element forms an ionic compound when it reacts with lithium
Answer:
Fluorine
Explanation:
Flourine forms an ionic bond when combined with lithium. The valence electronic shell of lithium has just one single electron. Fluorine has 7 electrons in its valence shell but requires just a single electron to complete its octet. When lithium and fluorine combines, fluorine achieves its octet and lithium resembles Helium, a noble gas. This transfer of electron between Li and F is what results in an ionic bond between the two elements. It is also worthy to note that for an ionic bond to form, the electronegative difference between the two atoms should be greater than 0.7.
Fluorine has an electronegativity of 4.0 and that of Li is 1.0. The difference is 3.0. This implies that an ionic compound would be formed. The compound is LiF, Lithium Fluoride.
Two unknown molecular compounds were being studied. A solution containing 5.00 g of compound A in 100. g of water froze at a lower temperature than a solution containing 5.00 g of compound B in 100. g of water. Which compound has the greater molar mass? Explain how you arrived at your answer.
Answer:
Compound B.
Explanation:
The freezing point depression is a colligative property. It depends on the number of particles (moles) present in the solution.
[tex]\Delta T_{\text{f}} = K_{\text{f}} b[/tex]
where b is the molal concentration
[tex]b = \dfrac{\text{moles of solute}}{\text{kilograms of solvent}}\\\\n = \dfrac{\text{mass}}{\text{molar mass}} = \dfrac{m}{M}[/tex]
If m is constant (5 g), then
[tex]n \propto \dfrac{1}{M}[/tex]
The compound with the greater molar mass has fewer moles and therefore fewer particles to depress the freezing point.
That must be Compound B, because Compound A has the lower freezing point.
Solute compound A caused a greater freezing point depression than compound B, suggesting that compound A has fewer particles in solution. Therefore, compound A must have the greater molar mass compared to compound B.
The question pertains to the concept of colligative properties, particularly, freezing point depression. Compound A, when dissolved in water, caused the freezing point to decrease more than compound B did under the same conditions. This behavior is explained by the colligative property of freezing point depression, which states that the freezing point of a solvent will decrease when a solute is dissolved in it.
The amount of freezing point depression is directly related to the number of solute particles in solution. Because both solutions contain the same mass of solute but compound A caused a larger freezing point depression, it must be that compound A has fewer particles in solution compared to compound B. Since fewer particles correspond to a larger molar mass, compound A has the greater molar mass.
The number of grams per mole of something is also known as_______
Answer:
Molar mass
Explanation:
This is a counting unit which represents the mass in grams of a substance that make up one mole of the substance. This mass is calculated as follows:
Molar mass = Mass/ Number of moles
Units: grams/mol
Molar mass is also known as number of grams/mole of something.
Explanation:A substance's molar mass is defined as substance mass divided by the substance amount in moles. It is expressed in Kg/mol but gram/mol is used for the convenience for study.
It is often used in chemistry for the conversion of mass in grams to substance moles. The relation that is used to convert the gram top mole is that the molar mass is equal to the molecular mass in grams.
How did Albert Einstein explain the photoelectric effect?
A) Light is made up of electrons
B) Light is made up of atoms
C) Light is made up of electricity
D) Light is made up of photons
Answer: D) Light is made up of photons
Light, Einstein said, is a beam of particles whose energies are related to their frequencies according to Planck's formula. When that beam is directed at a metal, the photons collide with the atoms. If a photon's frequency is sufficient to knock off an electron, the collision produces the photoelectric effect.
Option D, Light is made up of photons.
What is photoelectric effect?The photoelectric effect is a phenomenon where electrons are emitted from the metal surface when the light of sufficient frequency is incident upon. The concept of the photoelectric effect was first documented in 1887 by Heinrich Hertz and later by Lenard in 1902. But both the observations of the photoelectric effect could not be explained by Maxwell’s electromagnetic wave theory of light.
What is Einstein's photoelectric effect?Light, Einstein said, is a beam of particles whose energies are related to their frequencies according to Planck's formula. When that beam is directed at a metal, the photons collide with the atoms. If a photon's frequency is sufficient to knock off an electron, the collision produces the photoelectric effect.
To learn more about Photoelectric effect, refer
https://brainly.com/question/18482125
#SPJ2
300 moles of sodium nitrite are needed for a reaction. the solution is 0.450 m. how many ml are needed?
In order to provide the 300 moles of sodium nitrite required for the reaction using a 0.450 m solution, you would need 666,667 mL of the solution.
Explanation:To determine how many milliliters of a 0.450 m sodium nitrite solution are needed for a reaction where 300 moles of sodium nitrite are needed, you'll want to use the equation that relates moles, molarity (M), and volume (V). This equation is Moles = Molarity x Volume.
For the given question, we know the amount of moles (300 moles) and the molarity (0.450 m), so we can rearrange the equation and plug in our values to find the volume: Volume (L) = Moles / Molarity = 300 moles / 0.450 M = 666.67 L.
Do remember to convert this volume to milliliters because the question asks for the answer in milliliters. 666.67 L x 1000 mL/L= 666,667 mL.
Therefore, you would need 666,667 mL of a 0.450 m sodium nitrite solution to provide the 300 moles of sodium nitrite required for the reaction.
Learn more about Molarity Calculation here:https://brainly.com/question/15948514
#SPJ12
To determine the volume of solution needed for the reaction, we can use the formula Volume = Number of moles / Molarity. In this case, the volume of solution needed is approximately 666,666.67 mL.
Explanation:To determine the volume of solution needed, we need to first calculate the number of moles of sodium nitrite in 300 moles. Since the solution is 0.450 M, this means there are 0.450 moles of sodium nitrite in every 1 liter of solution. Therefore, to calculate the volume of solution needed, we can use the formula:
Volume (in liters) = Number of moles / Molarity
Volume = 300 moles / 0.450 moles
To convert the volume from liters to milliliters, we can multiply the volume by 1000:
Volume (in milliliters) = Volume (in liters) * 1000
Plugging in the values, we get:
Volume (in milliliters) = (300 moles / 0.450 moles) * 1000 = 666666.67 mL
Therefore, approximately 666,666.67 mL of solution are needed for the reaction.
Learn more about Volume of solution here:https://brainly.com/question/14710169
#SPJ12
Classify these definitions as that of an Arrhenius acid, an Arrhenius base, or other. Arrhenius acid definition Arrhenius base definition OtherA substance that can donate a hydrogen ion to another substanceA substance that produces an excess of hydroxide ion (-OH) in aqueous solution.A substance that produces an excess of hydrogen ion (H+) in aqueous solution
Answer:
Explanation:
A substance that produces an excess of hydroxide ion (-OH) in aqueous solution.
This is an arrhenius Base
According to the arrhenius theory, a base is a substance that combines with water to produce excess hydroxide ions, OH⁻ in an aqeous solution. Examples are :
Sodium hydroxide NaOHPotassium hydroxide KOHA substance that produces an excess of hydrogen ion (H+) in aqueous solution
This is an arrhenius Acid
An arrhenius acid is a substance that reacts with water to produce excess hydrogen ions in aqueous solutions.
Examples are;
Hydrochloric acid HClHydroiodic acid HIHydrobromic acid HBr