Which of the following parts of the eye is located at the back of the eye, receives focused light waves from the lens, and is composed of tiny, light-sensitive nerves? A. the retina B. the cornea C. the convex lens D. the optic nerve

D) Potential gravitational energy. Since the roller coaster cars are a the top of the roller coaster they have potential energy due to the gravity's downwards pull on them.

D) potential gravitational energy

Potential gravitational  energy is the energy possessed or acquired by an object due to a change in its position when it is present in a gravitational field. In simple terms, it can be said that potential  gravitational energy is an energy that is related to gravitational force or to gravity.

There are a many types of potential energy but when we talk about the height , when something is kept on a certain height their occur a gravitational force acting on that object and potential gravitational energy can be calculated as U = m*g*h  , since  roller coaster has potential energy when it is sitting at the top of this loop

hence , correct answer is D) potential gravitational energy

learn more about potential gravitational energy

https://brainly.com/question/8822715?referrer=searchResults

#SPJ2

Answer:

0.655 seconds

Explanation:

92.4 ft/s=

60.5/x

Cross multiply:

60.5s =92.4ft x

Divide both sides by 92.4

=0.655s

Ans) D) -7.6N

See magnitude of force along x direction will not depend on forces along y - direction

So we would only consider forces along x direction

Now , net force acting along positive direction = -24 + 20cos35°

As only cos component is acting along x-direction.

Putting value of cos35° we would get,

Net force = -24 +16.4N

= -7.6 N

Hope it helps!!!

Answer:

-7.6 N

Explanation:

Answer:

Efficiency is defined as "it is the ratio  of output to the input

input work  = 25 J ,

output work = (4 × 5) = 20 J  ,

                                           Work  =Force × distance moved

                                                       = 4 × 5

                                                        = 20 J  

                 efficiency (η ) = 20 ÷ 25

                                          = 80%

Efficiency is 80%              

The magnitude of the net force causing the block's acceleration can be found using Newton's second law of motion. For a block on a frictionless ramp inclined at 15 degrees, the net force is equal to the weight of the block multiplied by the sine of the angle of incline. In this case, the magnitude of the net force is approximately 2.1 newtons.

The magnitude of the net force causing the block's acceleration can be determined using Newton's second law of motion, which states that the net force on an object is equal to its mass multiplied by its acceleration. Since the ramp is frictionless, the only force acting on the block is its weight. We can break the weight into two components: the force along the ramp (parallel) and the force perpendicular to the ramp.

The force along the ramp can be found by multiplying the weight by the sine of the angle of incline, which is 15 degrees. The force perpendicular to the ramp is the weight multiplied by the cosine of the angle of incline. Since there is no force perpendicular to the ramp, we only need to consider the force along the ramp. Given that the weight of the block is 8.0 newtons, the magnitude of the net force causing the block's acceleration is 8.0 newtons multiplied by the sine of 15 degrees, which is approximately 2.1 newtons. Therefore, the correct option is 2.1N.

Final answer:

The magnitude of the net force causing the block's acceleration down a 15-degree frictionless incline is 2.1N, calculated using the gravitational force component along the incline.

Explanation:

The student is asking about the magnitude of the net force causing acceleration in a block sliding down a frictionless incline. The block has a weight of 8.0 newtons, and the incline is at a 15-degree angle to the horizontal. To find the net force, we need to calculate the component of the gravitational force that acts along the incline. This is done by multiplying the weight of the block by the sine of the angle of the incline.

Here's the calculation: net force (F_net) = weight (mg) × sin(θ), where g is the acceleration due to gravity (9.8 m/s²) and θ is the incline angle. Plugging in the known values, F_net = 8.0 N × sin(15°). The sine of 15 degrees is approximately 0.2588. So, F_net = 8.0 N × 0.2588 ≈ 2.07 N.

Therefore, the correct answer is 2.1N, which is the magnitude of the net force causing the block's acceleration down the incline.

we Know that gravitational field strength(g) at a point on a planet  is equal to  gravitational force exerted per unit mass placed at that point.

It Means,

g=F/m

Here,

g=gravitational field strength

F=Gravitational force

m=Mass

Case A

planet force =10 and mass= .5

g1=F/m

g1=10/.5

=100/5

g1=20m/s

case B

F=30 and m=2

therefore g2=30/2

g2=15m/s^2

case C

F=45 and m=3

g3=45/3

=15m/s^2

case D

g4=60/6

g4=10m/s^2

from above results it is clear that the gravitational field strength of planet D is minimum which is 10m/s^2 and gravitational field strength of planet A is maximum which is 20m/s^2

Use the defining equation for kinetic energy.

E = mv² / 2

E = (1500kg)(2 m/s)² / 2

E = 6000 J / 2

E = 3000 J

Therefore, the cars kinetic energy is 3000 J.

K.E= 1/2 mv2

=1/2 (1500)(2)2

=3000J

Given data:

Mechanical advantage (M.A) = 6

Load is moved(Output force) = Fo = 36 N,

Input force = Fi = ?

We know that Mechanical advantage = Fo÷Fi

                                                  M.A. = Fo÷Fi

                                                       6 = 36÷Fi

                                                       Fi= 6N

Input force is 6N

To move a 36 N load up a ramp with a mechanical advantage of 6, an input force of 6 N is required. The work done when moving objects up a ramp involves overcoming gravity by applying a force over a certain distance.

Mechanical Advantage: The mechanical advantage of a ramp is calculated by dividing the length of the ramp by the vertical height it spans. In this case, with a mechanical advantage of 6, the input force needed can be calculated using the formula: Input Force = Load Force ÷ Mechanical Advantage.

Calculation: Given Load Force = 36 N and Mechanical Advantage = 6, Input Force = 36 N ÷ 6 = 6 N. Therefore, an input force of 6 Newtons is needed to push the 36 Newton load up the ramp.

Work and Energy: When moving objects up a ramp, work is done against gravity. The work done is equal to the force applied multiplied by the distance moved in the direction of the force.

meters per second or m/s

The standard unit of measure for speed in physics is meters per second (m/s). It is derived from the SI unit system where speed is calculated as distance over time. Consistent units and including measurement units with values are crucial in physics.

In physics, the standard unit of measure for speed is meters per second (m/s). This unit comes from the International System of Units (SI), which is a consistent framework for physical measurements. Speed is the distance traveled over time, requiring a measurement of length divided by time. Therefore, the dimension of speed is L/T, with L representing length and T representing time, and its SI unit is m/s.

The preservation of consistent units across physics equations is essential; the dimensions on both sides of an equation must match. For instance, you cannot equate quantities that have different dimensions. Since motion can be measured in various units, such as kilometers per hour, it is important to use the correct conversion when comparing or converting speeds. Additionally, speed has a defined value in m/s given that the speed of light is defined in these units since 1983.

Furthermore, when considering units named after people, they are capitalized, as in 'Newtons'. It is critical in physics to always include units in your answer, for they provide context and scale to the value. Therefore, when providing the speed of an object, it should always be expressed with the appropriate unit, like '5 m/s'—not just '5'.

Speed is defined as the distance an object moves per unit of time.

The distance an object moves per unit of time is known as speed. Speed is defined as the rate of change of distance with respect to time and is expressed as distance covered in unit time. This concept is a fundamental aspect of motion, helping us understand how fast or slow an object moves relative to time. The formula to calculate speed is speed (v) = distance covered (D) / time taken (Δt). It's important to note that speed is a scalar quantity, meaning it has magnitude but not direction, unlike velocity which includes direction. An everyday example illustrating speed is driving a car: if you travel 60 miles in 1 hour, your speed is 60 miles per hour (mph).

Answer

3

Left resistance

These three resistances are in Parallel. Their fractions are added.

Right Resistance

Answer

R_left + R_right = 2 + 1 = 3

Hope it helps.

If you have any query, feel free to ask.

Answer:

The ball will have a kinetic energy of 0.615 Joules.

Explanation:

Use the kinetic energy formula

[tex]E_k = \frac{1}{2}mv^2 = \frac{1}{2}0.032kg\cdot 6.2^2 \frac{m^2}{s^2}= 0.615J[/tex]

The kinetic energy at the moment of leaving the hand will be 0.615 Joules. (From there on, as it ball is traveling upwards, this energy will be gradually traded off with potential energy until the ball's velocity becomes zero at the apex of the flight)

Answer:

Force acting on the car, F = 8000 N

Explanation:

It is given that,

Mass of the car, m = 2000 kg

Acceleration of the car, [tex]a=4\ m/s^2[/tex]

We need to find the force used to accelerate the car. The product of mass and acceleration is called the force exerted to an object. It is given by :

[tex]F=m\times a[/tex]

[tex]F=2000\ kg\times 4\ m/s^2[/tex]

F = 8000 N

So, the force acting on the car is 8000 N. Hence, this is the required solution.

We will use the percentage difference formula and so:

[tex]\frac{|Population_{final}-Population_{initial}|}{Population_{initial}}[/tex]

By plugging in our values we obtain:

[tex]\frac{321-281}{281}=0.142349[/tex]

And 0.142349 converted to percentage is :

[tex]0.142349 \times 100 = 14.2349%[/tex]

Therefore, there was a population increase of 14.2349% from 2000 to 2015 in the US.

Given:

Year 2000 = 281 million people

Year 2015 = 321 million people

321 M - 281 M = 40 M

An increase of 40 million people.

40M/281M = 0.14 or 14%.

From 2000 to 2015

the population increased by 14%

Their weight changed but their mass didn't. The moon is smaller than the Earth and has a weaker gravitational pull and makes you weigh lighter. Your weight on the Moon is 16.5% what you would experience on Earth. Mass never changes.

Hope it helps.

In 1969, humans landed on the moon for the first time, the astronaut's weight changed because there is a difference in the gravity of the earth and the moon, but the mass of the astronaut does not change because mass is the content of matter and it is independent of the variation in gravity

It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another,

The mass of an amount remains constant throughout all planets in the cosmos, but its weight varies depending on the gravity of each one.

Thus, When humans first set foot on the moon in 1969, the astronaut's weight changed due to the difference in the gravitational pull between the earth and the moon, but the astronaut's mass did not change because mass is the component of matter and is unaffected by changes in gravity.

Learn more about gravity from here

brainly.com/question/4014727

#SPJ5

M = mass of the first sphere = 10 kg

m = mass of the second sphere = 8 kg

V = initial velocity of the first sphere before collision = 10 m/s

v = initial velocity of the second sphere before collision = 0 m/s

V' = final velocity of the first sphere after collision = ?

v' = final velocity of the second sphere after collision = 4 m/s

using conservation of momentum

M V + m v = M V' + m v'

(10) (10) + (8) (0) = (10) V' + (8) (4)

100 = (10) V' + 32

(10) V' = 68

V' = 6.8 m/s

Answer:

The greatest horizontal force that can be exerted without moving the table is 168.56N.

Explanation:

The maximum friction force is determined from the coefficient of static friction as follows:

[tex]F_{fr}=\mu\cdot F_{norm} = 0.43\cdot F_{norm}[/tex]

where the the normal force is exerted by the ground as a reaction to the weight of the table, and has same magnitude as but opposite direction to the gravitational force on the table:

[tex]F_{fr} = 0.43\cdot 40kg\cdot 9.8 \frac{m}{s^2} = 168.56 N[/tex]

This is the maximum static force, so the friction force will be matching and opposing any horizontal force up to 168.56N.

The greatest horizontal force that could be exerted on the table while it remains stationary is 168.56 N.

We'll begin by calculating the normal reaction. This can be obtained as follow:

N = mg

N = 40 × 9.8

N = 392 N

Finally, we shall determine the frictional force.

F = μN

F = 0.43 × 392

F = 168.56 N

Therefore, the greatest horizontal force that could be exerted on the table is 168.56 N

Learn more about frictional force:

https://brainly.com/question/26025414

The time frame is the same for both triangles and the area is the same for both triangles. hence, option (2) and (3) are correct.

According to Kepler's Second Law, a line extending from the sun to the planet sweeps out equal regions of the ellipse in equal amounts of time. Accordingly, the planet moves more slowly away from the sun than it does toward it.

So, the two highlighted triangles in the image refer that:

Hence option (2) and (3) are correct.

Learn more about  keplers second law here:

https://brainly.com/question/4216415

#SPJ5

This is because the nasal mucus is blocking the nasal passage, meaning that if there is anything that he/she is trying to smell will be blocked by the mucus and will not be able to go down into the nasal passage where the smells are detected.

Should be the Lithosphere

Relative to reference frame of the airplane he's sitting in:

-- Gravitational potential energy = (mass) (gravity) (height)

His height above the airplane is zero, so his GPE is zero.

-- Kinetic energy = (1/2) (mass) (speed)²

His speed relative to the airplane is zero, so his KE is zero.

Mechanical energy = (potential energy) + (kinetic energy)

Mechanical energy = ( 0 ) + ( 0 )

The poor fellow's total mechanical energy is zero .

The mechanical energy of a system is the sum of its kinetic energy and potential energy. The given system will have a mechanical energy equal to 26379 × 10³  J.

Kinetic energy of an object is generated by virtue of its motion whereas, potential energy is stored by virtue of its position. The sum of potential and kinetic energy is called mechanical energy.

Potential energy p = m g h.

mass  = 60 Kg

height h = 8000 m

g = 9.8 m/s² .

p = 60 kg × 9.8 m/s² × 8000 m

  = 4704 × 10³ J

Kinetic energy Ke = 1/2 m v²

             Velocity v = 850 km/hr

Ke = 1/2 (60 Kg × (850 km/hr)²  )

     = 21675 × 10³ J

Thus, mechanical energy = 4704 × 10³ J  + 21675 × 10³ J  

                                           =  26379 × 10³  J

Therefore, the mechanical energy of the man is 26379 × 10³  J.

To find more on mechanical energy, refer here:

https://brainly.com/question/29408366

#SPJ2

Amplitude is the height of a wave.

Given that:

mass (m) = 0.5 Kg,

spring pulled (x) =0.50 m,

spring constant (k)= 50 N/m,

                   accelearation = ?

        we know that from Hook's law

                         F = k.x

                            = 50 × 0.5

                            =25 N

Also we know that Force = m. a

                                    25  = 0.5 × a

                                      a = 50 m/s²

÷

To find the acceleration of the mass when released from the spring, we use Hooke's Law and Newton's second law to calculate it as 50 m/s².

The student is asking about the acceleration of a 0.50 kg mass when it is released from 0.50 m below the equilibrium point of a spring with a spring constant of 50 N/m. To find the acceleration, we use Hooke's law, which states that the restoring force of the spring is F = -kx, where k is the spring constant and x is the displacement from the equilibrium position. Since the restoring force is the only force acting in the vertical direction (ignoring air resistance and assuming gravity is being balanced by the tension in the spring), this force will also be the net force acting on the mass to produce acceleration, according to Newton's second law, F = ma, where m is the mass and a is the acceleration.

First, we calculate the force:

F = kx = 50 N/m × 0.50 m = 25 N

Then, we use Newton's second law to find the acceleration:

a = F/m = 25 N / 0.50 kg = 50 m/s²

Answer:

answer is D

Explanation:

I just took this asesment

Answer if you have a picture on your screen if to man pulling a cart it’s c

Explanation: