Which one of the following is true about employer responsibility in providing fall protection to workers? not selected A. Employers can only use guardrails as a primary method of fall protection not selected B. Employers have flexibility in choosing a fall protection system they believe will work best in a situation selected C. Employees have the right to choose appropriate fall protection methods that suit them for the job
Answers
Option B is the correct answer, Employers have flexibility in choosing a fall protection system they believe will work best in a situation selected. It is the primary duty of employer to provide safety to its workers. Employers must setup a suitable protection system at workplace from falling off from overhead platforms and from elevated workstations during construction for safety of its employees.
Further Explanation:
⦁ Employer must ensure compliance to OSHA-Fall protection in construction.
⦁ Generally, fall protection must be ensured by deploying guardrail systems at the edge of construction sites, safety systems built by nets or personal fall arrest.
⦁ OSHA requires to built fall protection system irrespective of fall distance to make sure safety conditions for workers/ employees.
Answer details:
Grade: High School
Subject: Computer Science and Technology.
Learn More:
Fall protection and compliance to OSHA rules and regulations
https://brainly.com/question/8910167
Employer responsibility in providing fall protection
brainly.com/question/5872956
Key Words: Fall protection, OSHA, workplace safety, guardrail systems etc.
Image of guardrail as an example is attached.
The correct option about employer responsibility in providing fall protection to workers is employers have flexibility in choosing a fall protection system they believe will work best in situation selected.
The fundamental responsibility of employers is to provide safety to their workers. They must provide a secure workplace to the workers from falling off from overhead platforms.
Further Explanation:
Workers have some rights regarding their safety as below:
Working condition should be out of serious danger. Workers must have information about workplace hazards and also method to prevent from danger. Analysis of record of data of illness and injuries during work time. Workers must know their rights under the law. They can also file a complaint asking OSHA to check the workplace if they feel any security hazards.Therefore, falls are most common reason of several injuries and death in workplace. Employers must follow proper guidelines to prevent from these serious danger.
Learn more:
1. Fall protection and compliance to OSHA rules and regulations
brainly.com/question/8910167
2. Employer responsibility in providing fall protection
brainly.com/question/5872956
Answer details:
Grade: High School
Subject: Computers and Technology
Chapter: Employee Safety
Keywords:
Work place, OSHA, health, injuries, illness, complaint, employer, overhead platform, responsibility, danger, workers, hazards, security, rights, prevent, safety
Related Questions
Hazardous gas released from a factory’s smokestack is an example of __________ externality.
Answers
When a printer receives a command, it generates a unique signal to the os, which is called a(n)?
Answers
A navigation device that transfers packets of data between two or more networks is called a _______
Answers
A url consists of a ____, a domain name, sometimes the path to a specific web page or location in a web page, and the web page name.
Answers
or
https://brainly.com:443/question/6057782#respond
What os x tool allows you to configure your computer to multiboot between os x and windows, repartitioning an internal hard drive if necessary?
Answers
When you reboot your system, the computer follows start-up instructions stored in this type of memory. multiple choice dram sdram cache flash?
Answers
The boot process refers to the process where the processor register is set to empty, and the status on the microprocessor is also set by resetting.
The main cause of boot failure is related to hardware such as hard disk, VGA, RAM that is not detected or damaged, the processor is overheating and there are other problems.
Further explanation
Boot the computer is the process of starting the initial computer startup until the full takeover of the device's operating system. Booting is identical to the BIOS, which is the Basic Input Output System which is a software code that is embedded in a computer system. The BIOS has the main function and is very vital in providing instant visual information when the computer is turned on.
Booting is divided into Cool Boot and Warm Boot. Cool booting is the process of turning on the computer when the computer is turned off or not turned on. This is the main boot done by pressing the Power button. A warm boot is a process of turning on the computer when the computer is turned on and has electricity like restarting. The purpose of restarting is to repeat the computer process from the beginning because previously there have been some disturbances such as the Crash program or just want to reset the system.
Learn more
reboot https://brainly.com/question/6714581
BIOS https://brainly.com/question/8754254
Details
Class: high school
subject: Computers and technology
keywords: reboot, BIOS, system
Devices such as monitors and printers that are connected to a computer are called ________.
Answers
Columns and rows in a spreadsheet collectively are called a(n) ______.
Answers
Final answer:
Columns and rows in a spreadsheet are collectively called a table. Labeling columns as Quantity/units helps clarify what the numbers represent.
Explanation:
Columns and rows in a spreadsheet collectively are called a table. When labeling a column, for example, in a data table or on the axis of a graph, you should do so in the form Quantity/units to clearly indicate what the numbers in that column represent. This labeling format can help in yielding a pure number in a table or graph. It's important to follow this practice, as it can be seen in tables with various columns and rows, where each column often contains different quantities measured in specific units, helping to organize data effectively.
SOMEONE PLEASE HELP ASAP!!
1. Which of the following are examples of substrates? Select all that apply.
A. canvas
B. cardboard
C. charcoal
D. pencil
2. What responds to both visual appeal and functional needs?
A. applied art
B. decoration
C. fine art
D. visual art
3. What is a portrait?
A. a representation of a person
B. a written biography of a person
C. an artwork depicting the sea or ocean
D. an original artwork
4. What is a sculpture?
A. a piece of 2-D artwork in which there is only one copy
B. a 3-D type of artwork
C. an artist's representation of herself
D. an artwork depicting the sea or ocean
6. What term used to be defined as "using a blade to cut a physical photograph so that only a segment remains"?
A. clip art
B. crop
C. cut and paste
D. typeface
7. What term used to be defined as "an image in a printed work that a designer cut around with scissors or an X-ACTO blade and pasted into designs"?
A. clip art
B. crop
C. cut and paste
D. typography
8. Which technological improvement has reduced graphic designers' exposure to hazardous chemical developers?
A. computer
B. digital camera
C. smartphone
D.tablet
9. There are two sculptures of George Washington. One sculpture makes use of sharp edges and abstract shapes, while the other captures a more realistic view. Which of the following is different about these two sculptures?
A. medium
B. perspective
C. subject matter
D. technique
10. What is a composition that is designed so that every element in the composition represents a single idea or theme?
A. abstract
B. allegory
C. chiaroscuro
D. mosaic
11. Which of the following would be considered a disadvantage of using newer technology instead of traditional graphic design tools?
A. completing a project much faster
B. expense of the specialized programs used to complete the process
C. fewer people needed to finish the design
D. large number of design options available to choose from
12. What term refers to the sharing and application of technology from one field to another?
A. mass media
B. technology systems
C. technology transfer
D. trade-off
13. Which of the following accurately describes a piece of work that contains a Creative Commons: No Derivative Works license?
A. It can be copied, distributed, and displayed as long as the author is credited.
B. It can be copied, distributed, and displayed as long as no other version of the work is created.
C. It has been made available for any use in any piece of artwork that is also put in the public domain.
D. It has been made available to the general public for any use at no charge.
14. Which of the following accurately describes a piece of artwork that contains a Creative Commons: Share Alike license?
A. It can be copied, distributed, and displayed as long as the author is credited.
B. It can be used for any noncommercial use without attribution or cost.
C. It has been made available for any use in any piece of work that is also put in the public domain.
D. It has been made available to the general public for any use at no charge.
15. Which of the following copyright licenses is most appropriate if you create a video that you want to make available to anyone for any use unless they're going to use it to make money?
A. All Rights Reserved
B. Public Domain
C. Some Rights Reserved: Noncommercial
D. Some Rights Reserved: Share Alike
Answers
1.) Canvas and Cardboard
2.) Applied art
3.) A representation of a person
4.) A 3-D type of work
6.) Crop
7.) Clip art
8.) Digital Camera
9.) Technique
10.) Allegory
11.) Expense of the specialized programs used to complete the process
12.) Technology transfer
13.) It can be copied, distributed, and displayed as long as no other version of the work is created
14.) It has been made available for any use in any piece of work that is also put in the public domain
15.) Some Rights Reserved: Noncommercial
You can save your powerpoint presentation as a full-____ video, which incorporates all slide timings, transitions, animations, and narrations.
Answers
The answer that will complete the sentence above is full-fidelity. It is because saving your file in a full fidelity can not only save those things incorporated with the file but this enables to save the file as a way of ensuring that the file is performing fully and it could be recovered when needed.
Frank has created a résumé and separated the sections using headings. How can he set the headings apart from normal text?
Answers
Frank can use built-in heading styles and visual groupings for distinction, being consistent with design features and using the same font for coherence.
Frank can set the headings apart from normal text on his résumé by using built-in heading styles which are more than just bolded, enlarged, or centered text. True headings are structural elements that provide order and levels, offering a meaningful sequence especially beneficial to users of assistive technologies.
He should also use visual groupings of information, utilizing more space between sections than within a section, to help readers distinguish between different parts of the résumé. Additionally, Frank should be strategic and consistent in his use of design features like capitalization, bold, italics, and underline, and maintain the same font throughout the résumé and cover letter to ensure coherence.
What would be a situation in which you could use an Excell chart to present your data?
Answers
It is often used in statistics to show data of a population, samples,etc...
1. Which of the following accurately describes a piece of work that contains a Creative Commons: No Derivative Works license?
A. It can be copied, distributed, and displayed as long as the author is credited.
B. It can be copied, distributed, and displayed as long as no other version of the work is created.
C. It has been made available for any use in any piece of work that is also put in the public domain.
D. It has been made available to the general public for any use at no charge.
2. Which of the following accurately describes a piece of work that contains a Creative Commons: Share Alike license?
A. It can be copied, distributed, and displayed as long as the author is credited
B. IT can be used for any noncommercial use without attribution or cost
C. It has been made available for any use in any piece of work that is also put in the public domain
D. It has been made available to the general public for any use at no charge
3. Which of the following copyright licenses is most appropriate if you create a video that you want to make available to anyone for any use unless they're going to use it to make money?
A. All Rights Reserved
B. Public Domain
C. Some Rights Reserved: Noncommercial
D. Some Rights Reserved: Share Alike
Answers
2. C
3. C
Just did the test, these are the right answers!
1. The answer is: B. It can be copied, distributed, and displayed as long as no other version of the work is created.
No derivative works liscense are made when a certain content creator allow is content to be used by other people without having to make any payment to the content creator. But, legal issues would arise if the other users try to make the content appear as their own.
2. The answer is: C. It has been made available for any use in any piece of work that is also put in the public domain
The share alike license allows other users to freely copied and distribute the content, But they had to appropriately credited the original creator every time they share it. The users may have the option to not mention original creator if they pay a certain amount of money to the original creator.
3. The answer is: C. Some Rights Reserved: Noncommercial
Putting the content creation as 'some rights reserved: Commercial' only limit the monetization rights of the content to the original creators. in this type of copyright license, other users may have the right to monetize it if they arrange a certain type of revenue sharing system with the original creator.
To remove a worksheet group, you can right-click the sheet tab of a sheet in the group and then click ____ on the shortcut menu.
Answers
Explanation:
Refer to the figure shown below.
To delete worksheet named Sheet-C from the workgroup, right click on its tab and select delete from the popup menu.
Artwork and tables can only be inserted into slides that contain a placeholder. True False
Answers
Answer:
The correct answer is: "False".
Explanation:
Although there are specific spaces and tools for inserting artwork and tables in slides, you can insert them in any place, actually. In PowerPoint from Microsoft, for example, you have some tools for inserting artwork and tables, besides designing them as well, however you have freedom of option to place them in any place and diagram. This also works and makes sense for other sheets and files, such as in some pdf archives, Google docs and slides, and more.
(ps: mark as brainliest, please?!)
What is the term that is used for the area of a network that is affected when a device or network service experiences problems?
Answers
Which sql server 2012 edition is targeted at hosted, internet-facing deployment?
Answers
When the hyper-v role is added to a windows server 2012 r2 server, what is loaded first during boot?
Answers
You should type _______ space(s) after a period at the end of a sentence. A. zero B. three C. one D. two
Answers
You have installed anti-virus software on computers at your business. within a few days, however, you notice that one computer has a virus. when you question the user, she says she did install some software a few days ago, but it was supposed to be a file compression utility. she admits she did not scan the file before running it. what should you add to your security measures to help prevent this from happening again
Answers
Which type of spreadsheet cell represents the left hand sides (lhs) formulas in an optimization analysis?
Answers
In an optimization analysis using Excel's Solver, the type of spreadsheet cell that represents the left-hand sides (lhs) of formulas, which are essentially constraints within the optimization, is commonly referred to as the 'constraint cell' or 'target cell'.
Optimization analysis in Excel involves using the Solver tool to find the best possible solution to a problem within a set of specified constraints. In the context of Solver, the lhs of the equation typically refers to the constraints set by the user that must be satisfied in reaching an optimal solution. These are the cells where constraints are formulated and fed into Solver. For example, if we are optimizing a budget, the constraint can be that the total spending should not exceed a certain amount. This constraint is represented in a cell that Solver checks against the rhs value, often a set value or the result of an equation, to meet the criteria of the optimization exercise. The Solver tool then uses iterative techniques to adjust other 'variable cells' or 'decision variables' within the limits of these constraints in pursuit of the goal, which is typically to maximize or minimize a certain objective, such as profit or cost as specified in the 'target cell'.
Which of the following criteria would not make a person eligible to receive medicare benefits?Which of the following criteria would not make a person eligible to receive medicare benefits?
a.
The person is 65 years of age or older.
b.
The person has a terminal illness.
c.
The person has a qualifying disability.
d.
The person has end stage renal disease.
Answers
The answer is: B. The person has a terminal illness
An illness would be considered as 'terminal' if the medical professionals have no method to adequately treated and there is a high likelihood that it would be resulted in death.
People with terminal illness tend to not receive medicare benefit and the funding would be allocated to other people with higher expectation of living.
The criteria that would not make a person eligible to receive medicare benefits is the person has a terminal illness. Thus, option B is correct.
What is terminal?An illness would be considered as 'terminal' if the medical professionals have no method to adequately treated and there is a high likelihood that it would be resulted in death.
People with terminal illness tend to not receive medicare benefit and the funding would be allocated to other people with higher expectation of living.
Dual-eligible beneficiaries are individuals who are eligible for both Medicare and Medicaid, two government-run health insurance programs in the United States. Medicare is a federal health insurance program for individuals who are 65 or older, or who have certain disabilities, while Medicaid is a joint federal and state program that provides health insurance to low-income individuals and families.
To learn more about Medicare follow the link:
brainly.com/question/14011571
#SPJ5
Francescas spend 25 minutes on the Internet yesterday, if this is 5/6 of the time she spent on the computer, how long did she spend on the computer but not on the Internet?
Answers
There are different types of resource records used by dns servers, which record is used for: name to address mapping that supplies an ipv6 address for a specific dns name
Answers
---------------------------------
If no file specification of a web page is specified in the web address, a default web page is displayed
a. True
b. False
Answers
Which of the following people is responsible for providing worker training on the safe use of the equipment on a construction site?
A.
Designated competent person
B.
Employer
C.
OSHA compliance officer
D.
Worker
Answers
Answer: (C) OSHA compliance officer
Explanation:
The OSHA compliance officer is basically responsible for providing the training to the workers on the construction site about using the equipment safely. OSHA is stands for the occupational safety and the health administration and it is the federal agency with enforcement of the health and the safety legislation.
The OSHA compliance officer give training to the workers by teach them about all the tools and the equipment use and maintenance with proper rules and the regulations.
Therefore, Option (C) is correct.
Which type of dns resource record should be used to provide name resolution for a host on a network?
Answers
IPv6: AAAA
-----------------------
A computer processes data using only 1s and 0s.
A.True
B.False
Answers
Which of the following formulas would you use to calculate the power requirements of an electrical load?
A. P = E × I B. P = I × R C. P = E/R D. P = E/I
Answers
Which disk drive interface type provides data transfer throughput at rates up to 600 mbps to external devices?
Answers
Details:
The eSATA interface can provide raw data transfer rates of 6 Gbits/s and data rates of 600 mbps to external devices.
The name eSATA means e (external) SATA connection to devices such as external SATA hard disks drives.
In order to attain 600 mbps, the data transfer protocol requires SATA 3.0 or higher.
SATA stands for Serial ATA or Serial AT attachment.